Related
Ok so it's been a while since I've done any new ROMs or anything, mainly did things on my GS2 but now going with the GS3 and have been for a little bit now. It's all rooted and everything fine, but I decided to finally install the CM10 ROM and am having a difficult time. I finally got it to install and boot up (had a slight issue with the boot loop which I got passed) but now my home screen says Sprint on the bottom. Maybe I downloaded the wrong CM10 zip? Or maybe they're all like this but I didn't think it was. On to the bigger problem, no mobile connection. I'm able to restore to my backed up status so that's what I'm going with for now but I'd really like to get this working. Any suggestions? Have I supplied enough info. Any help would be greatly appreciated, thanks to anyone that can give me some direction here.
You flashed the wrong zip.
for AT&T you need d2att http://get.cm/?device=d2att
If you need a different carrier then ATT try checking the CM10 thread http://forum.xda-developers.com/showthread.php?t=1778270
Randomacts said:
You flashed the wrong zip.
for AT&T you need d2att http://get.cm/?device=d2att
If you need a different carrier then ATT try checking the CM10 thread http://forum.xda-developers.com/showthread.php?t=1778270
Click to expand...
Click to collapse
Thank you for that! Will that solve the network problem too? Seems like something like that would solve my problem all together. Anything else I should know?
Imnice777 said:
Thank you for that! Will that solve the network problem too? Seems like something like that would solve my problem all together. Anything else I should know?
Click to expand...
Click to collapse
yeah it should if not go back to complete stock and try again.
If none of that works check in settings, about phone and make sure your imei number is still intact (not showing zeros).
Ok so my IMEI is still intact but that zip for AT&T didn't work, I got an error. I cleared cache and user data and chose it from my internal memory, not sure what the issue is except maybe my CWM is outdated? Wasn't sure if it'd be a problem but maybe that's it. Any other suggestions?
Sent from my SAMSUNG-SGH-I747 using xda premium
Might be an APN issue. Try adding the APN for your carrier and see if your data works. What error are you getting when you try to flash the at&t version?
jethro650 said:
Might be an APN issue. Try adding the APN for your carrier and see if your data works. What error are you getting when you try to flash the at&t version?
Click to expand...
Click to collapse
The error reads "asset failed: getprop("ro.product.device") == "d2att" l l getprop(("ro.build.product") == "d2att" E:error in /emmc/cm-10-20121024-NIGHTLY-d2att (1).zip (Status 7) Installation aborted."
Update your recovery.
Sent from my iPad 4
Update CWM recovery to latest version.
And you can get a newer version here. http://forum.xda-developers.com/showthread.php?p=28611956
Official ClockworkMod Recovery Images for AT&T
Ok so I figured it out and fixed it! All I had to do was update my CWM with ROM Manager like I thought I might have to do. I saw another thread with a similar issue, too so I guess this is somewhat common. Gotta update everything when it comes to this stuff. Thanks for all the responses though, I appreciate it.
Somehow I didn't see the replies telling me to update CWM before I.posted that I figured it out. Either way, I'm currently running it and all is awesome so far. If anyone has suggestions on specific things to do now?
Sent from my SAMSUNG-SGH-I747 using xda premium
please help
Hi there, i've been having issues trying to install cm10 since last week and it's been frustrating. After doing hours of search I found a thread that says I should reinstall cwm recovery. I've tried doing this with rom manager from google play but it didn't work. It says, make sure you have stable internet connection and that your sd card is installed and working. Now, do have to Odin again to flash the newest clockworkmod recovery. If not how do I do then cuz I keep getting aborted and every time have to restart system and set it up all over. by the way my phone is a galaxy s3 i747 android 4.0.4 rooted cwm 5.5.0.4. thanks
androidehca said:
Hi there, i've been having issues trying to install cm10 since last week and it's been frustrating. After doing hours of search I found a thread that says I should reinstall cwm recovery. I've tried doing this with rom manager from google play but it didn't work. It says, make sure you have stable internet connection and that your sd card is installed and working. Now, do have to Odin again to flash the newest clockworkmod recovery. If not how do I do then cuz I keep getting aborted and every time have to restart system and set it up all over. by the way my phone is a galaxy s3 i747 android 4.0.4 rooted cwm 5.5.0.4. thanks
Click to expand...
Click to collapse
Download this cwm 6.0.1.4 http://db.tt/te3vInsu , reboot into recovery and flash it, reboot recovery and flash cm10.
tonymtl said:
Download this cwm 6.0.1.4 http://db.tt/te3vInsu , reboot into recovery and flash it, reboot recovery and flash cm10.
Click to expand...
Click to collapse
that's not the problem, I already have the file. it's kind of my question, I keep getting aborted from the process of flashing. no errors, only aborted
androidehca said:
that's not the problem, I already have the file. it's kind of my question, I keep getting aborted from the process of flashing. no errors, only aborted
Click to expand...
Click to collapse
If that's the case I'd probably completely go back to stock and root with the updated CWM. Kind of a pain but might be your best bet. Updating for me was the solution. Try that and let me know how it goes.
Sent from my SAMSUNG-SGH-I747 using xda premium
I am new on here but I am having a problem with installing custom Rom's on my Rogers Galaxy S3... I had same S3 from rogers before and could install anything but unfortunately the glass broke and they exchanged for a new one.
Now i am getting the following error no matter whhat i m trying to flash using CWM recovery:
.. Installing: /sdcard/cm-10-20121011-EXPERIMENTAL-d2att-M2.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20121011-EXPERIMENTAL-d2att-M2.zip
(bad)
Installation aborted..
I have tried to change the recovery - even installed TWRP recovery and still similar error using that. I have downloaded several different ROM's and its same error for all of the.
Can anyone help with this?
I have ClockWorkMod REcovery v6.0.1.4 now
JotD said:
I am new on here but I am having a problem with installing custom Rom's on my Rogers Galaxy S3... I had same S3 from rogers before and could install anything but unfortunately the glass broke and they exchanged for a new one.
Now i am getting the following error no matter whhat i m trying to flash using CWM recovery:
.. Installing: /sdcard/cm-10-20121011-EXPERIMENTAL-d2att-M2.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20121011-EXPERIMENTAL-d2att-M2.zip
(bad)
Installation aborted..
I have tried to change the recovery - even installed TWRP recovery and still similar error using that. I have downloaded several different ROM's and its same error for all of the.
Can anyone help with this?
I have ClockWorkMod REcovery v6.0.1.4 now
Click to expand...
Click to collapse
Have you tried to flash a different ROM? Maybe this one is corrupted causing the error your getting.
Bad rom, flash the CM10 Nightly if you want to experience an amazing rom. Or AOKP/PA.
tried a lot of different roms
I have tried lot of different ROM's
like the Kyan Rom, Black Jelly rom and lot of other rom's and still the same issue...
I have even tried using the files which i flashed on my previous Galaxy S3 (it worked fine on that one )
Flash back to stock with Odin re flash cwm
Sent from my SGH-I747M using xda premium
Are you sure the download of your Rom was completed? Make sure the file size is the same as the one states online.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
link to stock Rogers Rom
Anyone know link to stock rogers ROM and how do i delte everything from the phone to install it?
Droiduniverse said:
Bad rom, flash the CM10 Nightly if you want to experience an amazing rom. Or AOKP/PA.
Click to expand...
Click to collapse
I find that CM10 has a LOT of graphical bugs though, likes when switching apps, it layers the app screen in the background while the other "zooms" in.
JotD said:
Anyone know link to stock rogers ROM and how do i delte everything from the phone to install it?
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=SGH-I747
Here ya go!
Heres a youtube video to show you how:http://www.youtube.com/watch?v=ypmqJbZqOaU&feature=relmfu
Or take a look at www.GalaxyS3root.com, the owner of the site frequently reviews different new roms and posts the instructions on how to install them on the post. The first time I rooted my phone I followed his instructions which were very straightforward and clear cut.
Sent from my Galaxy Note 2 - N7100
therockk said:
Or take a look at www.GalaxyS3root.com, the owner of the site frequently reviews different new roms and posts the instructions on how to install them on the post. The first time I rooted my phone I followed his instructions which were very straightforward and clear cut.
Sent from my Galaxy Note 2 - N7100
Click to expand...
Click to collapse
That is how I rooted my Telus S3 with no issues at all.
I frequently visit his site, and his other site GalaxyNote2Root.com to get updated on the newest and noteworthy roms!
Any luck?
JotD said:
I am new on here but I am having a problem with installing custom Rom's on my Rogers Galaxy S3... I had same S3 from rogers before and could install anything but unfortunately the glass broke and they exchanged for a new one.
Now i am getting the following error no matter whhat i m trying to flash using CWM recovery:
.. Installing: /sdcard/cm-10-20121011-EXPERIMENTAL-d2att-M2.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/cm-10-20121011-EXPERIMENTAL-d2att-M2.zip
(bad)
Installation aborted..
I have tried to change the recovery - even installed TWRP recovery and still similar error using that. I have downloaded several different ROM's and its same error for all of the.
Can anyone help with this?
I have ClockWorkMod REcovery v6.0.1.4 now
Click to expand...
Click to collapse
Any luck with this? I get the exact same response when trying to install CM10. I've tried several times.
NoNameGuy_ said:
Any luck with this? I get the exact same response when trying to install CM10. I've tried several times.
Click to expand...
Click to collapse
Hey I had the exact same issue. I realize this thread is from a couple months ago but maybe this will help other Googlers such as myself.
The only thing I had to change was to NOT install from an EXTERNAL SD drive.
That would always give me the (bad) message.
Instead, copy the rom over to the internal drive. It's called an SD drive so it's a little bit confusing. But if you copy it to the internal drive and then install from there, all should be good
NoNameGuy_ said:
Any luck with this? I get the exact same response when trying to install CM10. I've tried several times.
Click to expand...
Click to collapse
I had this same problem with several different roms, here's what helped:
I'm using ClockworkMod Recovery v5.0.2.7 -> chose Advanced from the menu -> Fix Permissions
It took a few minutes and then I was able to install a new rom from the same package which wouldn't work just minutes earlier.
:good:
Aramatheus said:
I had this same problem with several different roms, here's what helped:
I'm using ClockworkMod Recovery v5.0.2.7 -> chose Advanced from the menu -> Fix Permissions
It took a few minutes and then I was able to install a new rom from the same package which wouldn't work just minutes earlier.
:good:
Click to expand...
Click to collapse
You should update your recovery if you want to flash 4.4 ROMs.
audit13 said:
You should update your recovery if you want to flash 4.4 ROMs.
Click to expand...
Click to collapse
Yup I actually did ^_^, I kept having problems with several roms I tried - mainly everything getting stuck at boot but not anymore
T989 without any SD card in it, the one I had died apparently new one on order. Went to flash the latest PA rom but kept getting error 7 using CWM. I updated my recovery to the latest TWRP and still will not flash. I tried updating to the newest radio UVMC6, but that wont flash. I am currently on CM10.1 nightly. My process for flashing is recovery, superwipe, flash, which is when the flash errors out and I re wipe and then I can flash my CM10 back on. So I can flash CM10 all day long but nothing else. I searched on here and found that the ATT version of this phone has this problem and you have to flash an AOKP and then flash whatever you want, other phones with similar problems say use ODIN and flash stock and then go from there. I am just looking for any advice on this situation. I could not find anything specific enough in my search to help me and I am hoping someone here can. Thanks in advance.
Note: I have also tried flashing CM10.1 RC5 and has the same problems.
moebawlz said:
T989 without any SD card in it, the one I had died apparently new one on order. Went to flash the latest PA rom but kept getting error 7 using CWM. I updated my recovery to the latest TWRP and still will not flash. I tried updating to the newest radio UVMC6, but that wont flash. I am currently on CM10.1 nightly. My process for flashing is recovery, superwipe, flash, which is when the flash errors out and I re wipe and then I can flash my CM10 back on. So I can flash CM10 all day long but nothing else. I searched on here and found that the ATT version of this phone has this problem and you have to flash an AOKP and then flash whatever you want, other phones with similar problems say use ODIN and flash stock and then go from there. I am just looking for any advice on this situation. I could not find anything specific enough in my search to help me and I am hoping someone here can. Thanks in advance.
Note: I have also tried flashing CM10.1 RC5 and has the same problems.
Click to expand...
Click to collapse
For onw those superwipe scripts are not needed with twrp, u might be getting the error from that, are u trying to flash from internal SD card since ur external died? That might cause it but I don't think so, I would suggest trying a manual wipe of all partitions, data, system, cache, dalvik, 2x , then flash, if that doesn't work try using Odin, go back to stock and start over, that should fix it definetly
Sent from my SGH-T989 using xda premium
soupysoup said:
For onw those superwipe scripts are not needed with twrp, u might be getting the error from that, are u trying to flash from internal SD card since ur external died? That might cause it but I don't think so, I would suggest trying a manual wipe of all partitions, data, system, cache, dalvik, 2x , then flash, if that doesn't work try using Odin, go back to stock and start over, that should fix it definetly
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank you... I wasnt sure about superwipe on TWRP since I just put it on and came from CWM. I am trying to flash from the internal card and the new external card will be at my doorstep tomorrow so I will drop that in as well. I will drop back in once I get all this done and hopefully all goes well.
Again thanks.
moebawlz said:
Thank you... I wasnt sure about superwipe on TWRP since I just put it on and came from CWM. I am trying to flash from the internal card and the new external card will be at my doorstep tomorrow so I will drop that in as well. I will drop back in once I get all this done and hopefully all goes well.
Again thanks.
Click to expand...
Click to collapse
Good glad I can help, let me know how it all goes, now I'm interested lol
Sent from my SAMSUNG-SGH-T989 using xda premium
Ok so I got my new SD card. Tossed that in, just figured I would try flashing from the external, no luck there. Same issues.
Odin back to stock using this tutorial http://forum.xda-developers.com/showthread.php?t=1513359&page=3
Used http://forum.xda-developers.com/showthread.php?t=2195283 this to regain root.
Got CWM back on but now I cannot flash SuperUser
When I go to flash Superuser it says
Mounting System
Deleting System:bin/su...
Deleting System:xbin/su
Extracting files to SYSTEM
Setting SYSTEM:bin/su permissions to 06755...
Creating SYSTEM:xbin/su symbolic link...
E: Error in /emmc/Superuser-3.0.7-efghi-signed.zip
(Status 0)
Installation aborted
So on the plus side I didn't brick the phone... downside now I am back to Gingerbread and currently stuck here...
Possibly a bad zip file?
Any ideas on this?
Quick update... I am a moron... Did not realize that root is kept with this restore... Got Superuser from market and am good to go.
Installing TWRP now and will have an update on the flash soon.
OK... the fun seems to have just begun
I cannot install TWRP from GooManager. No clue why, looking on here and I found //techerrata.com/browse/twrp2/hercules (cant link too new of a member)
So as it seems I can download the .img and GooManager should see it and if that doesnt happen I can install it through the terminal with these commands
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
OR flash it with ODIN... Which I would assume I get the .tar file and follow the same process as putting the recovery files in?
Aside from TWRP being an issue, I tried installing the PA rom with CWM and I got this:
Installing update
set_perm:some changes failed
E:Error in /sdcard/pa_hercule...zip
(Status 7)
Installation aborted
The same error I had in the first place
moebawlz said:
OK... the fun seems to have just begun
I cannot install TWRP from GooManager. No clue why, looking on here and I found //techerrata.com/browse/twrp2/hercules (cant link too new of a member)
So as it seems I can download the .img and GooManager should see it and if that doesnt happen I can install it through the terminal with these commands
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
OR flash it with ODIN... Which I would assume I get the .tar file and follow the same process as putting the recovery files in?
Aside from TWRP being an issue, I tried installing the PA rom with CWM and I got this:
Installing update
set_perm:some changes failed
E:Error in /sdcard/pa_hercule...zip
(Status 7)
Installation aborted
The same error I had in the first place
Click to expand...
Click to collapse
I'm not sure what your overall problem is, but if you are going to install TWRP do not use Goo Manager or the img file. They have been messing up peoples phones. Odin the tar or try the zip from the TWRP thread.
meekrawb said:
I'm not sure what your overall problem is, but if you are going to install TWRP do not use Goo Manager or the img file. They have been messing up peoples phones. Odin the tar or try the zip from the TWRP thread.
Click to expand...
Click to collapse
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Along with that after I got TWRP working through Goo Manager again I tried flashing PA again and I had the same error as I did in the first place.
Maybe my phone just hates anything but the nightly I had before...
moebawlz said:
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Click to expand...
Click to collapse
If you can boot into TWRP, then they must have fixed the Goo problem.
It seems like you have tried most everything. Maybe you should Odin back to stock. If you are comfortable doing it, that is.
i went to flash with goo last night and it bricked the phone kind of, i had to ODIN and reflash the CWM again and bam the phone rebooted no problem
meekrawb said:
If you can boot into TWRP, then they must have fixed the Goo problem.
It seems like you have tried most everything. Maybe you should Odin back to stock. If you are comfortable doing it, that is.
Click to expand...
Click to collapse
I did Odin back to stock before. I am still on stock gingerbread right now with root access and am getting the errors I have been. I followed the tutorials in the sticky thread that I posted before that got me back to stock.
Within TWRP I tried installing the newest Cyanogen Mod and got
E:Error executing updater binary in zip
Error flashing zip
When I try installing the PA rom I get the same error
Any thoughts? Would going back to stock through Odin and doing this again potentially fix it? or is that a shot in the dark?
Lucky for me I kept a backup saved on my PC from before I did anything here. So I am back to the CM 10.1 Nightly I started on for the time being.
Is there any other method of flashing a rom that I might be able to try?
moebawlz said:
I did Odin back to stock before. I am still on stock gingerbread right now with root access and am getting the errors I have been. I followed the tutorials in the sticky thread that I posted before that got me back to stock.
Within TWRP I tried installing the newest Cyanogen Mod and got
E:Error executing updater binary in zip
Error flashing zip
When I try installing the PA rom I get the same error
Any thoughts? Would going back to stock through Odin and doing this again potentially fix it? or is that a shot in the dark?
Click to expand...
Click to collapse
It would be a shot in the dark. I did a Google search for your error and a couple of people said they were able to fix it by using TWRP 2.3. That was for different phones though. Maybe try that before going stock.
I am by no means a pro at this and am still learning as I go. Just to make sure of what I am doing, can I Odin TWRP 2.3? I also found this
http://forum.xda-developers.com/showthread.php?t=1639673
or
http://forum.xda-developers.com/showthread.php?t=1658418
Just a thought here... I keep gettin emmc errors... I was reading about upgrading and downgrading TWRP through the Terminal Emulator and it said use emmc or sdcard depending on what the phone reads it as.
When I first got the phone i recall seeing emmc when i would go into any file browser. Now it just says sdcard0 (internal) & sdcard1 (external)
So how can I get recovery to stop looking for emmc and start looking for sdcard0?
Unless I am way off in left field here with this.
moebawlz said:
I am by no means a pro at this and am still learning as I go. Just to make sure of what I am doing, can I Odin TWRP 2.3?
Click to expand...
Click to collapse
Yes, use Odin and the 2.3.3.0 tar from the techerrata website. I like using the Odin method because I have never had a problem upgrading recovery that way. I don't know about the emmc errors because I have only used the dd method like twice.
Edit: Maybe your internal memory is corrupted? I'm not sure how to test for that though.
moebawlz said:
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Along with that after I got TWRP working through Goo Manager again I tried flashing PA again and I had the same error as I did in the first place.
Maybe my phone just hates anything but the nightly I had before...
Click to expand...
Click to collapse
I think u must be getting bad DL then because none of that sounds right lol, if u got twrp to load into your device and all is working fine then the only other option is a bad DL, try checking the DL with a root browser or something to see the size of the file, status 7 errors are from the zip, usually bad install script in the ROM, which could be caused by a bad DL, check the DL size and let me know
Sent from my SGH-T989 using xda premium
went back to 2.3.3 and still having the same error.
Is there a way to correct any possible errors in my internal memory?
moebawlz said:
went back to 2.3.3 and still having the same error.
Is there a way to correct any possible errors in my internal memory?
Click to expand...
Click to collapse
If the DL is good, I don't know what else to tell u that is very strange indeed, but interesting too, I've never not been able to install at all, I'm curious..
Sent from my SGH-T989 using xda premium
Hello everyone. I tried to wipe my kindle and replace the rom last night but its not letting me install anything. I have been running a version of Smoothrom for months now without any issues. I am giving the kindle to my gf so I wiped it and tried to upgrade to a kitkat rom first. I did a complete wipe of everything then loaded the roms on via usb. Now, when I try to install a new rom I get an error which Ill post below. I am using TWRP 2.5.0.0. I tried loading several different 4.4 roms and they all get the same error:
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/AmazonHfk2.8-20131220-Stable-otter.zip
Error flashing zip '/sdcard/AmazonHfk2.8-20131220-Stable-otter.zip
Updating partition details.......
It stays like that. If I try to reset it I get a message saying "Root permissions appear to be lost, fix root permissions now?"
Any ideas would be really appreciated.
SOLVED: I tried a few different Roms and it seems like its just the 4.4 roms that are failing. Im assuming its just my version of TWRP so ill try to update it. Feel free to delete this thread. Sorry for clogging up the forum.
I have recently updated my HTC one X to the latest CyanogenMod, after I flashed the rom the phone keeps rebooting endlessly
I have been looking for the past few days for a fix, this is my last resort, I've tried the following:
Attempt 1:Install an original ROM
Problem: doesn't go past htc logo, I tried erasing the cache before, as this was a common fix for it, I get "error:remote not allowed" (this happens when I try to erase any file recovery, boot ect.) so I tried a different path...
Attempt 2:use an RUU
Problem: not able to source an RUU that is newer (3.14.980.27) and attempting s-off, from what i could fine, required a working ROM
Attempt 3: load another nandroid backup onto the SD partition, one that is new.
Problem: Using CWM my computer won't detect the SD when mounted nor will adb detect the device whilst in recovery, I then tried TWRP, this resulted in "E: unable to open lunfile: (no such file or directory)" so that was out...
Attempt 4: push the nandroid file to the device using adb and then use CWM or TWRP to install the nandroid backup
Problem: only the file would be transferred and none of the juicy usable bits that I needed.
As you can see I'm a fair bit of a NOOB, and out of ideas so if you think I have done something wrong or have gotten close with one of these steps and just need to do it a bit differently please tell me and I can go into more detail on how I cocked up. I have tried these steps on 2 other computers with a huge range of usb cords as well.
If anyone can help, I would be a very happy person
Did you flash the boot.img
Sent from my One X using XDA Premium 4 mobile app
Full wipe and flash again. Don't forget the boot.IMG which is the kernel.
Sent from my Nexus 7 using xda app-developers app
Also which CM did you flash? The latest nightlys aren't very stable.
I would recommend that you visit CM11's thread which is here: http://forum.xda-developers.com/showthread.php?t=258303
from what I saw, the lastest nightlies aren't the most stable but a few builds before that seems too be quite good :good:
Bobbi lim said:
I would recommend that you visit CM11's thread which is here: http://forum.xda-developers.com/showthread.php?t=258303
from what I saw, the lastest nightlies aren't the most stable but a few builds before that seems too be quite good :good:
Click to expand...
Click to collapse
Now you are really getting freakin annoying ! Reposting 2 times answers that already have been given in 1 thread.....i would almost call it "spamming"