Related
Installed Andromadus 4.0 beta on my wife's G2. When I got home from work my wife said that the phone had restarted and would now only boot into clockworkmod recovery v5.8.1.0. Tried factory reset and wiping the caches and reflashing. Also tried flashing CM9 unofficial but the phone just shuts off in the middle of the flash and reboots back into clockwork. Tried to flash stockmod but I get a "can't open error". Currently the phone boots into Clockwork mod, stays on for 60 secs, then reboots itself back into clockwork mod. Help please!
maybe try to reflash your recovery, boot into fastboot and try...
When you say 'tried to flash stockmod' do you mean a PC10IMG?
Cause those are made to be flashed in hboot mode, not recovery.
-Nipqer
Nipqer said:
When you say 'tried to flash stockmod' do you mean a PC10IMG?
Cause those are made to be flashed in hboot mode, not recovery.
-Nipqer
Click to expand...
Click to collapse
Well that must be why that option didn't work. I'm pretty new to all this. Have a MyTouch I rooted a couple weeks ago that works great. But I am having fits with this one, and worse, it's my wifes phone Any other suggestions?
wipe everything in recovery, then flash a superwipe.zip (also fastboot -w is good but if your new dont worry) no flash a stable rom in recovery. i suggest elite mod, its a cm7 based rom that i personally like. all files will be found in the development threads along with any instructions needed. if you have troubles ask here again but make sure you
1 wipe all
2 superwipe.zip
3 flash rom (elitemod or whatever)
Sent from my HTC Vision using xda premium
demkantor said:
wipe everything in recovery, then flash a superwipe.zip (also fastboot -w is good but if your new dont worry) no flash a stable rom in recovery. i suggest elite mod, its a cm7 based rom that i personally like. all files will be found in the development threads along with any instructions needed. if you have troubles ask here again but make sure you
1 wipe all
2 superwipe.zip
3 flash rom (elitemod or whatever)
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
It worked! Thank you so much!
great to hear! if you used and like the rom i suggested make sure to thank the developer, it doesnt seem that too many use this rom any more but it is still one of my favorites for the g2 and the dev deserves great credit
Not really working!
demkantor said:
great to hear! if you used and like the rom i suggested make sure to thank the developer, it doesnt seem that too many use this rom any more but it is still one of my favorites for the g2 and the dev deserves great credit
Click to expand...
Click to collapse
I tried installing superwipe, and all sorts of different android operating systems but I cant seem to get my phone to get out of clockworkmod v5.8.1.0 and I can get to fastboot or hboot but it wont go passed the HTC screen. Every time I try installing an updated OS or a different OS or even doing the superwipe.zip it just says installation aborted and i can't get it to work! Any tips?
For future reference, don't go blindly flashing "Stock" images and such via the bootloader you tend to get yourself into more trouble that way (bricking, or making it difficult to get back to rooting).
Also if you're frequently using ICS roms I recommend using 4EXT Touch Recovery instead of ClockworkMod. A lot more useful tools in the recovery itself especially for wiping or formatting specific partitions.
When you get a chance check out which eMMC is used on that phone (click the eMMC name in my signature to see the poll thread which tells you how to check). Good for future reference if something acts up again.
Hi All, let me start with a warning…
total Android n00b here, doing his first ROM flash on a newly rooted T-Mobile G2. I’ve read and searched a bit in the forum threads to see if I could solve this on my own, but I do need help.
VISION PVT SHIP S-OFF
HBOOT - 0.82.0000 (PC1010000)
MICROP - 0425
RADIO - 26.02.01.15_M2
eMMC - boot
Aug 20 2010, 16:51:01
This is from using the instructions in Strawmetal’s PDF guide to Downgrading from Gingerbread to Froyo and Root. I am working with a G2 phone that was set to Factory Reset before rooting, so there is no user data to backup or worry about.
1. I downloaded the Andromadus Mimicry 1.1.2 ROM image, and verified the md5 checksum on my sdcard using the AFV Legacy application. The Gapps image also was verified as well.
2. Using ROM Manager 5.0.0.8 from the Google Market, I ran Clockwork Recovery to install the Andromadus image. I left all settings on defaults and the installer ran fine.
3. When it restarted, I was left stuck at the white HTC screen for ages… the longest I left it was 20 mins. After that, I pulled the battery and restarted. Same white HTC screen.
4. I tried using Volume (+) key and Power On to get back to Clockwork Recovery, but the phone vibrated (buzzed) 3x times quickly, and the Power LED lamp pulsed an amber color. Again, yank battery, restart, same white HTC screen.
5. finally I decided to read more of the help for adb, and found the command “adb reboot-bootloader”. This let me get into the default Recovery mode, and it proceeded to find the PC10IMG.zip I still had on the sdcard from doing the Froyo downgrade. Recovery checked it out, ran it and restored the stock Froyo image and my phone did a proper restart. WHEW.
After that, I had to run adb to install the hboot recovery image file, and the busybox checksums were valid according to Strawmetal’s PDF instructions to get permanent root back after restoring the stock Froyo image.
I have done this process about 4 times, and am really good at typing inside adb now
But I’m lost…
-did I pick a ROM that doesn’t work with the G2? Other posters to the forum thread appear to be using the HTC Vision or G2.
-is ROM Manager not a good way to install a ROM?
-when I tried to get back into Recovery, what do the 3x buzzes/amber power LED mean?
-I never got to install the Gapps image; was I supposed to install that first, then the ROM image?
I imagine I did something wrong (duh!), but I can’t spot it. If someone can help me through this, I’d appreciate some advice very much.
thanks!
Rather than clockwork, use 4EXT recovery, much better for our device. ROM manager and clockwork have grown very iffy over the past year. Don't use rom manager to install a rom, download the zip yourself and manually install it in recovery.
Next you need to find the "superwipe+ext4.zip" floating around here, it is indispensable for FULLY wiping your phone when switching roms.
Mimicry works fine on the G2, in fact everything (except a few sense roms that need a Desire Z hboot) in the development section runs fine on the G2.
So....get the ROM, GApps for that ROM, the Superwipe zip (you will flash this right before you begin flashing the rom) on your SD card and make sure you are using 4EXT recovery (find the link in the dev section).
Make sure before you do ANYTHING you make a Nandroid backup (using your recovery).
Your issue is actually addressed in the Mimicry OP, please read it first. That said, the problem is almost certainly because you're coming from GB without a full wipe. You can use 4ext to repartiton/wipe all, or you can use superwipe+ext4 as mentioned by Nospin.
Sent from my HTC Vision using xda premium
Hi Nospin,
Thank you very much for your suggestions!
I will revise my root and remove Clockwork, and switch to 4EXT instead.
I appreciate the idea of "superwipe"; I will look for that as well today.
If I understand everything right...
-replace CWM with 4EXT
-place superwipe.zip, Gapps.zip and the Mimicry ROM.zip on the top level of the sdcard first.
-reboot the phone and run 4EXT recovery
-select superwipe to run first, then the ROM and then Gapps
-then restart the phone
When I used CWM before to install the ROM, it rebooted on its own before I could install Gapps. Will 4EXT let me do each install right after each other or do I have to return to 4EXT for each separate install?
regards,
motionmonk
Nospin said:
Rather than clockwork, use 4EXT recovery, much better for our device. ROM manager and clockwork have grown very iffy over the past year. Don't use rom manager to install a rom, download the zip yourself and manually install it in recovery.
Next you need to find the "superwipe+ext4.zip" floating around here, it is indispensable for FULLY wiping your phone when switching roms.
Mimicry works fine on the G2, in fact everything (except a few sense roms that need a Desire Z hboot) in the development section runs fine on the G2.
So....get the ROM, GApps for that ROM, the Superwipe zip (you will flash this right before you begin flashing the rom) on your SD card and make sure you are using 4EXT recovery (find the link in the dev section).
Make sure before you do ANYTHING you make a Nandroid backup (using your recovery).
Click to expand...
Click to collapse
Hi blk_jack,
I went back to the Mimicry page and re-read the FAQ section.
I think what I got out of it the first time was that if the ROM flash failed, it could be a corrupt ROM image. I will definitely use 4EXT to repartition before I try again with a ROM flash.
I guess I am still getting used to the terms for everything; can 4EXT do the nandroid backup? or is there a better process for setting that up?
thank you!
motionmonk
blk_jack said:
Your issue is actually addressed in the Mimicry OP, please read it first. That said, the problem is almost certainly because you're coming from GB without a full wipe. You can use 4ext to repartiton/wipe all, or you can use superwipe+ext4 as mentioned by Nospin.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Yes, you should be able to flash the rom and then GApps without rebooting. Give me a few and I will send you a PM with a few links....
Shot you a PM.
Thanks! I'll check it out :good:
Nospin said:
Shot you a PM.
Click to expand...
Click to collapse
Update-not working
Ok...
I re-flashed back to stock Froyo, and did a permanent root.
Installed 4ext Recovery (instead of Clockwork), and got a copy of SuperwipeG2+ext4;
I copied new checksum'd copies of Mimicry 1.1.2 ROM and GApps to my sdcard.
Booted into 4ext Recovery and installed from .zip the SuperwipeG2+ext4 file.
System, data and cache are all converted to ext4 partitions.
Wiped the system and data and cache partitions.
Installed from inside Recovery the Mimicry ROM and then the GApps archives.
No errors reported.
Upon reboot, I still get the white HTC screen. UGH.
I've left it on in that state for 30 mins... I had to yank the battery after that in shame...
I have tried to make sure that I read up on background steps, and I feel I do understand the overall process, but something is still getting in the way. I am doing this as I mentioned in an earlier post on a factory reset G2 with a clean erased SD card (has the stock Froyo image, Andromadus Mimicry ROM and GApps only). There is no SIM card installed either, wifi is off (to avoid OTA upgrade requests).
Are there other things I can try, or info I can supply that would help? I think I'm so close to getting this done... I must be overlooking something obvious.
I run that by rom along with Cm9 beta..... Try adding that to your boot process. Just Cm9 beta..... Other than version of crash.... That's just what I have experienced
Sent from my HTC Vision using xda premium
Hi amogil,
Just to be sure I understand, are you saying you are swapping between Andromadus and CM9 beta on your phone?
Did you flash CM9 first? and then Andromadus?
or just carrying the CM9 beta image and running Andromadus?
Sorry, I'm all sorts of confused here lol
thanks
amogil said:
I run that by rom along with Cm9 beta..... Try adding that to your boot process. Just Cm9 beta..... Other than version of crash.... That's just what I have experienced
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Ugh....it's frustrating isn't it?
Can you boot into any other rom? For example if you downloaded CM7.2? If you don't have any problems we can eliminate some possibilities.....
I had a similar problem booting into Mimicry my first time, in that I could get past the white HTC screen but after that my screen would just go black. After a couple frustrating hours what ended up working for me was downloading the older version (1.1.1 I think?) and that booted up fine . Then after letting that boot I went back into recovery and flashed 1.1.2 without wiping (I might have wiped cache and dalvik...). Everything worked great after that. Not the same problem as you, but similar.....
It's definitely a thought, and I believe that's what amogil is telling me too...
Ya, I can try a different ROM and report back.
I guess I should go back to stock Froyo and then start from CM7.2, and if that boots, try Mimicry again?
-from the Andromadus FAQ, it says it if a different ROM is based on ICS9, you shouldn't have to wipe. But with CM7, I'd have to wipe the Dalvik cache, yes?
-since CM7 is obviously not based on ICS9, would being able to launch into that show some details I can't see at present? Just was curious.
Or, do you think it better to go stock Froyo and then the older Mimicry ROM?
Either way, I'll make sure that I use the Superwipe to set things to ext4 first.
thanks guys for the ideas,
motionmonk
Nospin said:
Ugh....it's frustrating isn't it?
Can you boot into any other rom? For example if you downloaded CM7.2? If you don't have any problems we can eliminate some possibilities.....
I had a similar problem booting into Mimicry my first time, in that I could get past the white HTC screen but after that my screen would just go black. After a couple frustrating hours what ended up working for me was downloading the older version (1.1.1 I think?) and that booted up fine . Then after letting that boot I went back into recovery and flashed 1.1.2 without wiping (I might have wiped cache and dalvik...). Everything worked great after that. Not the same problem as you, but similar.....
Click to expand...
Click to collapse
The boot.img should be the issue for a rom to not boot from the. Htc whitescreen. My guess is that you have a false s-off.
Sent from my HTC Vision using xda premium
SUCCESS!
Woohoo!
It works!
Since I had an ICS9 ROM already in place and was planning to wipe back to stock anyways, I tried flashing the older Andromadus 1.1.0 ROM.
What a surprise and treat to see the startup animation!
After poking around for an hour inside it, I then tried Recovery to reflash to the newest 1.1.2 ROM.
YAY! It works!
OMG, having a new ROM is like having a new phone-- there are so many improvements to the UI and it's quick and speedy versus GB. Dang, I'm happy now :victory:
Observations:
1. I did notice that inside Recovery, my touchscreen was barely functional when I tried to update from 1.1.0 up to 1.1.2-- I had to use the Volume +/- and the d-pad button to make selections. After the flash, the touchscreen is as responsive as ever.
2. it's got me thinking, that there must be a setting that is expected in the v1.1.2 ROM that the v1.1.0 ROM installed. Or could something else be the issue? I mean absolutely no disrespect to the developers... but on the technical side, I'm just curious what possibilities exist that might lead to this situation.
3. backup question... when I use MyBackup Pro, I know I can make an archive of the apps I've installed, and an archive of the data (documents, music, settings). Is a nandroid backup different from that? when I see the backup/restore options inside of 4ext Recovery, what are those doing that's different from what I get from MyBackup Pro?
thanks for all the help and encouragement. I have a new ROM installed! :good:
strawmetal said:
The boot.img should be the issue for a rom to not boot from the. Htc whitescreen. My guess is that you have a false s-off.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Oooh, a possibility. We will see if he can boot a different rom.
Whenever you switch roms (even if they are using the same Android version as a base) I suggest a full wipe. (Wipe all user data + Dalvik Cache + Cache, or just flash the superwipe zip). When upgrading the rom you are currently on (say upgrading CM Nightlies or going from Mimicry 1.1.1 to 1.1.2) you only need to really wipe cache and dalvik cache. Unless the dev states otherwise of course.
Hi strawmetal,
It turns out that I did have s-off after all...
1. after one of the many attempts to flash the ROM image and restoring back to stock Froyo, I said that "I'm gonna start this entire process over to be sure." So I get stuck using the fre3vo tool for about 30 minutes, rebooting and trying different address ranges to find the exploit.
Never found one... oh no, what did I do to the phone now??
-then it hit me; if it can't find an exploit... then it must already been used!
2. also, I did check each time I was in bootloader that my S-OFF was there and the radio and hboot were not changing versions.
3. Hehe, and the best indication was... being able to boot up finally!
I also have your Strawmetal.CM.V6.zip on my sdcard; if the downflash (?) to the Andromadus older ROM didn't work, yours was the CM7 image I wanted to try. If it's ok, I think I want to play around inside CM9 for a bit and then try yours out after that. I don't want to overwhelm my poor brain!
thank you for your suggestion... that definitely would be something to check as well.
strawmetal said:
The boot.img should be the issue for a rom to not boot from the. Htc whitescreen. My guess is that you have a false s-off.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thank You All!
A big shout out to:
Nospin
blk_jack
amogil
strawmetal
for taking the time out to help a total n00b stumble through his first ROM flash.
I really appreciate the points you guys made, and the help provided.
Thank you!
I hope that one day I can help someone else out with a problem and pass the kindness forward.
Yay! I have a working ROM!
motionmonk
motionmonk said:
Hi strawmetal,
It turns out that I did have s-off after all...
1. after one of the many attempts to flash the ROM image and restoring back to stock Froyo, I said that "I'm gonna start this entire process over to be sure." So I get stuck using the fre3vo tool for about 30 minutes, rebooting and trying different address ranges to find the exploit.
Never found one... oh no, what did I do to the phone now??
-then it hit me; if it can't find an exploit... then it must already been used!
2. also, I did check each time I was in bootloader that my S-OFF was there and the radio and hboot were not changing versions.
3. Hehe, and the best indication was... being able to boot up finally!
I also have your Strawmetal.CM.V6.zip on my sdcard; if the downflash (?) to the Andromadus older ROM didn't work, yours was the CM7 image I wanted to try. If it's ok, I think I want to play around inside CM9 for a bit and then try yours out after that. I don't want to overwhelm my poor brain!
thank you for your suggestion... that definitely would be something to check as well.
Click to expand...
Click to collapse
The bootloader can show a false s-off. I've personally experienced this. By the time "HTCDev bootloader unlock" came out i was already rooted. But as curious as I was I decided to try it out. Flashed an RUU ( my my why would I do that ) Got back s-on( guess this was false too) then I used HTCDev method to prove i'm a total noob. Then i relocked it using Nipqer's guide and followed setherio's method again. I was able to use the stock froyo, but no other rom would boot( false s-off being the culprit ). This time I ran to #g2root on freenode. Nipqer saved me.
WOW. i just realized there is SO MUCH I need to catch up on!
I'll have to look up some of these guides later today... but the RUU is the ROM upgrade, right?
Did you ever find a reason why you got the false S-OFF flag? It's clear that the way I was looking at the failed fre3vo exploit as proof of S-OFF isn't always going to be true... but how would you separate a false S-OFF flag from lets say a wrong hboot image?
BTW, your PDF on downgrading and rooting the G2 was a godsend. Very very helpful and clear.
One of the reasons why I took so long to try rooting was that I was confused by the different methods and the replies of X not working, Y is a better way... going through your guide and the info here on xda cleared alot of things up. :good:
strawmetal said:
The bootloader can show a false s-off. I've personally experienced this. By the time "HTCDev bootloader unlock" came out i was already rooted. But as curious as I was I decided to try it out. Flashed an RUU ( my my why would I do that ) Got back s-on( guess this was false too) then I used HTCDev method to prove i'm a total noob. Then i relocked it using Nipqer's guide and followed setherio's method again. I was able to use the stock froyo, but no other rom would boot( false s-off being the culprit ). This time I ran to #g2root on freenode. Nipqer saved me.
Click to expand...
Click to collapse
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
SectorNine50 said:
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
Click to expand...
Click to collapse
Is it possible that your hosts file needs modifying when installing the AT&T ROM? If the LG Support tool connects to LG's servers instead of your local http you set up, it will load the official ICS and completely wipe your phone to install that ROM... With my limited amount of knowledge, that's about all I could see if the process removes CWM Recovery.
Also, CWM 6.x is working fine for me, even manually flashed the touch recovery a few minutes ago, backed up my ROM and installed an updated ROM. No problems at all.
SectorNine50 said:
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
Click to expand...
Click to collapse
I don't know if anyone has tried the unbrick method with the new version of cwm but you might try twrp. When a similar version of cwm was in beta there were all sorts of issues. So maybe they haven't been fixed. Also are you installing cwm from GB? ICS has a locked boot loader so that might also be an issue.
http://forum.xda-developers.com/showthread.php?t=1888910
Now I would start with the unbricking guide for a 16th time but follow the directions to install twrp instead of cwm. You might also find you like it better. Good luck.
Sent from my LG-P930 using xda app-developers app
lordcheeto03 said:
Is it possible that your hosts file needs modifying when installing the AT&T ROM? If the LG Support tool connects to LG's servers instead of your local http you set up, it will load the official ICS and completely wipe your phone to install that ROM... With my limited amount of knowledge, that's about all I could see if the process removes CWM Recovery.
Also, CWM 6.x is working fine for me, even manually flashed the touch recovery a few minutes ago, backed up my ROM and installed an updated ROM. No problems at all.
Click to expand...
Click to collapse
I don't believe that the unbricking process would work if the hosts file was wrong, but I checked it again anyway, and it appears to be correct.
The AT&T ROM gets pushed via the abd shell after the unbrick and rooting process. The root appears to work, as the AT&T ROM that I push works fine, it's just not the ROM I want!
Swetnes said:
I don't know if anyone has tried the unbrick method with the new version of cwm but you might try twrp. When a similar version of cwm was in beta there were all sorts of issues. So maybe they haven't been fixed. Also are you installing cwm from GB? ICS has a locked boot loader so that might also be an issue.
http://forum.xda-developers.com/showthread.php?t=1888910
Now I would start with the unbricking guide for a 16th time but follow the directions to install twrp instead of cwm. You might also find you like it better. Good luck.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
After the unbricking process (after I get through all the nonsense on the Korean ROM), the phone is running the GB AT&T ROM, from there I push the CWM recovery.img to the phone using the abd shell. All seems to be working perfectly up until I go to flash the custom ROM! I don't get any errors when I flash the .zip either.
Initially I had installed CWM 6.x.x.x using the ROM Manager application. That's before all this nonsense started, and the phone was on the stock (but rooted) AT&T ICS ROM, so I know that's why I "bricked" my phone the first time.
I'll give TWRP a shot, hopefully that will work.
SectorNine50 said:
I don't believe that the unbricking process would work if the hosts file was wrong, but I checked it again anyway, and it appears to be correct.
The AT&T ROM gets pushed via the abd shell after the unbrick and rooting process. The root appears to work, as the AT&T ROM that I push works fine, it's just not the ROM I want!
After the unbricking process (after I get through all the nonsense on the Korean ROM), the phone is running the GB AT&T ROM, from there I push the CWM recovery.img to the phone using the abd shell. All seems to be working perfectly up until I go to flash the custom ROM! I don't get any errors when I flash the .zip either.
Initially I had installed CWM 6.x.x.x using the ROM Manager application. That's before all this nonsense started, and the phone was on the stock (but rooted) AT&T ICS ROM, so I know that's why I "bricked" my phone the first time.
I'll give TWRP a shot, hopefully that will work.
Click to expand...
Click to collapse
Ok so we know it's not the boot loader issue of ICS after dozens if not hundreds of successful installs using the unbricking guide the only thing left is the new version of cwm. Hopefully twrp will do the trick for you. Has anyone out there successfully completed the unbricking guide with the new version of cwm?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ok so we know it's not the boot loader issue of ICS after dozens if not hundreds of successful installs using the unbricking guide the only thing left is the new version of cwm. Hopefully twrp will do the trick for you. Has anyone out there successfully completed the unbricking guide with the new version of cwm?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I haven't tried the TWRP recovery a shot yet, since I haven't been home, but I figured it was worth pointing out that the CWM 5.x.x.x (can't remember exact version numbers right now) didn't work for me either. Every time I flashed a ROM, I'd end up with a boot loop on first boot, and then when I'd try to go back into recovery, I'd find that it wouldn't go back in there either.
It was basically acting like when I flashed the ROM that it overwrote the recovery partition, except no one else seems to have this same issue. Yet, if I didn't flash a ROM, I was able to go in and out of CWM recovery as often as I wanted.
Bah.
SectorNine50 said:
I haven't tried the TWRP recovery a shot yet, since I haven't been home, but I figured it was worth pointing out that the CWM 5.x.x.x (can't remember exact version numbers right now) didn't work for me either. Every time I flashed a ROM, I'd end up with a boot loop on first boot, and then when I'd try to go back into recovery, I'd find that it wouldn't go back in there either.
It was basically acting like when I flashed the ROM that it overwrote the recovery partition, except no one else seems to have this same issue. Yet, if I didn't flash a ROM, I was able to go in and out of CWM recovery as often as I wanted.
Bah.
Click to expand...
Click to collapse
Can you clarify exactly what method you are using to flash the ROM? I just can't imagine a scenario where flashing a ROM would overwrite the recovery. What ROM are you flashing?
Also, please confirm what phone you have.
drumist said:
Can you clarify exactly what method you are using to flash the ROM? I just can't imagine a scenario where flashing a ROM would overwrite the recovery. What ROM are you flashing?
Also, please confirm what phone you have.
Click to expand...
Click to collapse
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
SectorNine50 said:
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
Click to expand...
Click to collapse
You are correct, the Nitro is P930. And I'm sure this doesn't need pointing out, but when you download the ROM, make sure it's for P93x and not SU640. Most of the ROMS in the developer section have versions for both models.
Also, when you say you can't access CWM after flashing a ROM, how are you trying to access it? Holding Power+Volume down until the Factory Reset screen pops up? It still shows that screen even with CWM installed, but when you press the power button to perform the factory reset it SHOULD take you into CWM Recovery instead.
SectorNine50 said:
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
Click to expand...
Click to collapse
To access recovery, turn the device completely off. (If you're in a bootloop, pull battery or hold power button for ~20 seconds until screen stays off.) Then when phone is off, press and hold volume down and power buttons at the same time, not releasing until you see text asking if you want to factory reset. Press power button twice to confirm and you'll get to recovery.
Is this the method you're using to try to get to CWM?
My guess as to why you are getting bootloops is that you aren't wiping data first.
Yup, that's how I'm accessing CWM. After the flash, after I press the power button twice, I get something similar to a boot loop. A recovery boot loop, if you will.
Well, I've tried a couple ways now. I've tried using the "factory reset/wipe user data" menu item in CWM, and I've tried going into each partition and wiping them individually before flashing as well.
Just got home, I'll try flashing using the TWRP and let you guys know.
SectorNine50 said:
Yup, that's how I'm accessing CWM. After the flash, after I press the power button twice, I get something similar to a boot loop. A recovery boot loop, if you will.
Well, I've tried a couple ways now. I've tried using the "factory reset/wipe user data" menu item in CWM, and I've tried going into each partition and wiping them individually before flashing as well.
Just got home, I'll try flashing using the TWRP and let you guys know.
Click to expand...
Click to collapse
Good luck. Other possible things to try:
1) Check zip MD5 hash (or just redownload and replace) to make sure it's not corrupted.
2) Reformat entire SD card.
Interesting update:
I decided to give getting back into CWM recovery one more shot before I went through the process of re-unbricking again, and this time it managed to get in (for whatever reason).
So, I did a factory wipe, cleared dalvik cache, flashed the ParanoidAndroid ROM, backed out, did another factory wipe, and tried to reboot into the newly flashed ROM.
No luck. Boot looped, and didn't even get to the ROM animation. Following that, I had trouble getting back into the CWM recovery. Managed to try about 5 times and finally got in, however CWM stated:
Code:
CWM-based Recovery v5.0.2.7
E:Error in /cache/recovery/last_log
(Read-only file system)
So... my phone may have potentially unrooted it's self, somehow... Interestingly, it still shows the file systems as mounted.
So, now I'm doing a full SD card reformat. Figured I'd get that variable out of the way before I go any further.
SectorNine50 said:
Interesting update:
I decided to give getting back into CWM recovery one more shot before I went through the process of re-unbricking again, and this time it managed to get in (for whatever reason).
So, I did a factory wipe, cleared dalvik cache, flashed the ParanoidAndroid ROM, backed out, did another factory wipe, and tried to reboot into the newly flashed ROM.
No luck. Boot looped, and didn't even get to the ROM animation. Following that, I had trouble getting back into the CWM recovery. Managed to try about 5 times and finally got in, however CWM stated:
Code:
CWM-based Recovery v5.0.2.7
E:Error in /cache/recovery/last_log
(Read-only file system)
So... my phone may have potentially unrooted it's self, somehow... Interestingly, it still shows the file systems as mounted.
So, now I'm doing a full SD card reformat. Figured I'd get that variable out of the way before I go any further.
Click to expand...
Click to collapse
You are installing the wrong version of CWM. Never use anything older than 5.8.2.0. This is the one you want: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-p930.img
Anything older than that is known to not work.
Second thing: You seem to have an incorrect understanding of what "root" means. Having "root" simply means you have administrator access to your current ROM. When you install a new ROM, whether you had root access to your old ROM is meaningless frankly.
drumist said:
You are installing the wrong version of CWM. Never use anything older than 5.8.2.0. This is the one you want: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-p930.img
Anything older than that is known to not work.
Second thing: You seem to have an incorrect understanding of what "root" means. Having "root" simply means you have administrator access to your current ROM. When you install a new ROM, whether you had root access to your old ROM is meaningless frankly.
Click to expand...
Click to collapse
Ah, thank you! I must've been viewing an old thread. Now that I look at the version number, it appears that's the version I had been hunting for since the newest one didn't work.
Interesting, I most certainly misunderstood, I was under the impression that "rooting" the device was a filesystem level permission change. Good to know!
It seems like we are getting closer to a solution here. Thanks for your patience!
Well, that appears to have been my problem the whole time! That's kind of embarrassing, considering how much time I sunk into this and how simple the solution was!
Anyway, thank you all very much! I assume that TWRP would have also solved my problems as well. It would seem that both the older and newest versions of CWM have some problems (at least for me!).
SectorNine50 said:
Well, that appears to have been my problem the whole time! That's kind of embarrassing, considering how much time I sunk into this and how simple the solution was!
Anyway, thank you all very much! I assume that TWRP would have also solved my problems as well. It would seem that both the older and newest versions of CWM have some problems (at least for me!).
Click to expand...
Click to collapse
Yeah, the new one (6.0.1.5) just came out. I'll have to test it to see if it works for me.
For what it's worth, I haven't had any issues with 6.0.1.5 yet. The touch version is a must, though.
Malnilion said:
For what it's worth, I haven't had any issues with 6.0.1.5 yet. The touch version is a must, though.
Click to expand...
Click to collapse
Have you had a chance to compare to twrp?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Have you had a chance to compare to twrp?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I really enjoy the integration Rom Manager/CM Updater has with CWM. If twrp is capable of running the install scripts those two use, I might consider trying it out, but I don't really like manually going through the steps to flash a rom every day.
Hi, I'm having some trouble getting a rom on my phone. It is the CDMA version that I unlocked and rooted and switched over to Page Plus. Everything worked great. I wanted to try the new ROMS, but every time I get them installed, the phone works for 5-15 seconds after booting (asks for wifi, google accounts, etc). It freezes for a moment, works for another second, and then reboots. This continues indefinitely.
I am absolutely sure that I have followed all the steps for the roms I am using. For example, here is what I do for the pacman rom:
Download the zip, extract the boot.img
Boot the phone into fastboot, run fastboot flash boot boot.img with the extracted img.
Load up the recovery, system reset, wipe cache, wipe dalvik, wipe system
Install the pacman v15.3
Boot again into fastboot and replash the boot.img just for good measure.
Reboot the phone, and then it hits the reboot loop.
I've tried to use another kernel (jmzone v4) as well as android open Kang and SuPrimo, but I get the same thing with each of them.
I also tried to restore my backup, but now it doesn't boot. I don't have the original boot.img, so can anyone tell me where to get that?
So, any help?
Thanks!
If you had investigated before posting, you would have seen that this is a common problem with an easy fix. Your radio version is too high, which means you took the update on stock rom.
Relock and ruu. There is a guide in the general section about bootlooping/rebooting upon boot.
We are all happy to help, but please investigate and do your homework first before just creating threads next time. It helps us and it helps you grow your knowledge of android.
Sent from my One V using xda app-developers app
Fix
I agree that you should have done your homework. I've had this problem too [link to my thread], and I'll save you some time by giving you the threads.
You're going to need to flash the RUU to get it back to stock.
You'll find links to your RUU on this thread (I used the "RUU_PRIMO_C_ICS_40A_Sprint_WWE_VM_1.08.652.6_Radio_1.00.00.0521_2_NV_VM_3.46_0503_PRL61008_release_262414_signed.exe" for my Virgin Mobile CDMA phone).
Then follow this tutorial for exact steps on how to flash the RUU. It's the best that I've found.
Then try following the steps to flashing your ROMs. I've tried flashing AOKP and Paranoid with stock kernels and others (jmz's and SuperSick), but the only one that really has worked was recommended to me by another user. Try the CM10 ROM with the latest version of the SuperSick kernel (the latest I found was 12_21_12-16-04, which worked, but you'll have to look around for it). It's pretty awesome. Don't for get to click thanks to those posts that have helped you.
Lol you are a nicer person than I.
Sent from my One V using xda app-developers app
Haha I try to help the noobs, myself being kinda one :]
Sent from my One V using xda-dev app
Help, I will describe the following and any help I would love. I have the PRIMOC VM usa HTC ONE V.
Using Hasoon2000's All in one toolkit I have successfully Unlocked my phone, flashed TWRP recover 2.4.4, got root, and made a backup.
I then continue on to wipe cache and system and Factory reset to prepare to install ANY ROM. When I try to install the rom every time it just says Error in /sdcard/...[wherever rom is] (Status 1) FAILED
So then I proceed to restore my backup (this is why you always make a backup) and that works fine
Does the "(Status 1)" mean anything important?
I thought this was happening because I was running the newer radio so I used the RUU tool and now am using the good radio (not 0928) But this did not fix anything. This same thing happens over again. I have checked to make sure and I do have full root privileges.
I then tried to flash boot.img first and jmz kernel flashed successfully, but no rom will flash.
Why will NO ROM install?
I feel like I am missing something obvious but can't figure it out.
Also, whenever I do the factory restore it goes through all the process then fails when trying to wipe sd:ext , but my card is not partitioned. <I didn't know if that would be any help>
I am not a complete newb at all of this (running lg optimus for years- just new to the htc methods)
NEED Help please...
Can anyone help me out with this?
I have not made any progress since yesterday. I am successful at flashing kernels, I have flashed the boot.img of the sic kernel, but on both kernels I have no WiFi with the stock ROM.
So I either need to find the stock boot.img or have help flashing a ROM that fails everytime.
When every instruction says "Extract ROM" that is only to pull out the boot.img right, we don't flash an extracted package you flash exactly what you downloaded right?
sdxben said:
Help, I will describe the following and any help I would love. I have the PRIMOC VM usa HTC ONE V.
Using Hasoon2000's All in one toolkit I have successfully Unlocked my phone, flashed TWRP recover 2.4.4, got root, and made a backup.
I then continue on to wipe cache and system and Factory reset to prepare to install ANY ROM. When I try to install the rom every time it just says Error in /sdcard/...[wherever rom is] (Status 1) FAILED
So then I proceed to restore my backup (this is why you always make a backup) and that works fine
Does the "(Status 1)" mean anything important?
I thought this was happening because I was running the newer radio so I used the RUU tool and now am using the good radio (not 0928) But this did not fix anything. This same thing happens over again. I have checked to make sure and I do have full root privileges.
I then tried to flash boot.img first and jmz kernel flashed successfully, but no rom will flash.
Why will NO ROM install?
I feel like I am missing something obvious but can't figure it out.
Also, whenever I do the factory restore it goes through all the process then fails when trying to wipe sd:ext , but my card is not partitioned. <I didn't know if that would be any help>
I am not a complete newb at all of this (running lg optimus for years- just new to the htc methods)
Click to expand...
Click to collapse
When u flash sickkernel make sure you also install the zip through your recovery that should fix your WiFi problems and which recovery are you using ? Twrp or cwm?
Sent from my HTC One V using xda app-developers app
Obeezy562 said:
When u flash sickkernel make sure you also install the zip through your recovery that should fix your WiFi problems and which recovery are you using ? Twrp or cwm?
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
Hi Obeezy562,
my advice is to use the recovery program CMW or TWRP to re-format your external SD card. Then follow the normal instrutions and install the rom from zip using your recovery program. If you still have the same issue just let me know and I'll ponder longer.
regards
mcgi5sr2 said:
Hi Obeezy562,
my advice is to use the recovery program CMW or TWRP to re-format your external SD card. Then follow the normal instrutions and install the rom from zip using your recovery program. If you still have the same issue just let me know and I'll ponder longer.
regards
Click to expand...
Click to collapse
I'm not the one with the issue is sdxben lol I was just helping him but you are correct. I also recommend people cwm.
Sent from my HTC One V using xda app-developers app
Obeezy562 said:
I'm not the one with the issue is sdxben lol I was just helping him but you are correct. I also recommend people cwm.
Sent from my HTC One V using xda app-developers app
Click to expand...
Click to collapse
Ok, so tonight I will reformat my sdcard with TWRP then try to install the ROM. I tried the CWM recovery, but it was not touch based and did not respond to the power button as the OK, only the volume rocker worked.
I will try CWM recovery if someone can provide a link to the latest one, perhaps I was using an old one.
Twrp 2.4.4 I've also had issues with flashing some roms then downgraded to Twrp 2.2.0 and everything has been well since
sentfromtx
I can add that twrp 2.4 does have some issues. I use a cwm I found on google somewhere and if works just fine.
Sent from my HTC One V
http://forum.xda-developers.com/showthread.php?t=1871243
try this one out, should set up everything fine. Let me know if you need any further help