Related
Hello! I need help on my G2 that doesnt want to flash any roms at all. When i go into Rom Manager and download a rom and go install it, it finish and it boots up but it just stays on the first HTC logo. I leave it there for more then ten minutes relizing the in messed up. So i have to go back into recovery(manualy) and wipe all data and cache and then i flash the Virtuous Rom(because i downloaded it to the sdcard) and it boots up. Also when i try to flash the mods to the rom and it also fail and i have to do the same procedure again and again everytime i try to flash a rom or backup. What should i do? Oh i also have S-OFF if that helps.
have you tried manually downloading and flashing another ROM through recovery?
Also, are you doing full wipes when trying to flash the new ROMs?
martonikaj said:
have you tried manually downloading and flashing another ROM through recovery?
Also, are you doing full wipes when trying to flash the new ROMs?
Click to expand...
Click to collapse
No i havent tried from a diferrent recovery but i will. Also i have benn doing full wipes and cache wipes.
Not a different recovery..the same way you flashed that rom is the same way you can flash others..if you downloaded rom through rom manager you can find it in that folder which is on your sd card called clockworkmod
Sent from my HTC Vision using XDA Premium App
Spastic909 said:
Not a different recovery..the same way you flashed that rom is the same way you can flash others..if you downloaded rom through rom manager you can find it in that folder which is on your sd card called clockworkmod
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
I downloaded it from a youtube video and manually flashed them. But the problem is i already looked for a rom and i kinda dont want to trust people who post roms because my mytouch 3g got bricked becuase of the that. And i cant any roms i looked everywhere even on my best friend(google).
Sorry not even paying attention but thanks i will try that.
Chassen1236 said:
No i havent tried from a diferrent recovery but i will. Also i have benn doing full wipes and cache wipes.
Click to expand...
Click to collapse
Not a different recovery. Just make sure that your CWM recovery is the latest version. Download a ROM of your choice from the Dev section via your computer, transfer to your SDcard, and flash manually from your phone (not using ROM manager). Do a cache/dalvik cache/full data wipe. Then flash the ROM and reboot.
ROM manager can often have issues with bad downloads that lead to bad flashes. Flashing manually can be a way to troubleshoot and take a potential bad step out of the equation.
martonikaj said:
Not a different recovery. Just make sure that your CWM recovery is the latest version. Download a ROM of your choice from the Dev section via your computer, transfer to your SDcard, and flash manually from your phone (not using ROM manager). Do a cache/dalvik cache/full data wipe. Then flash the ROM and reboot.
ROM manager can often have issues with bad downloads that lead to bad flashes. Flashing manually can be a way to troubleshoot and take a potential bad step out of the equation.
Click to expand...
Click to collapse
You can download roms from dev section from your device as well.
As far as the op..what do you mean you downloaded from a youtube video and you don't trust people who past roms? If you don't trust people don't mess with it. The devs here aren't going to brick you phone..that's a mistake on your end or you not paying attention to what you were flashing
Sent from my HTC Vision using XDA Premium App
Spastic909 said:
You can download roms from dev section from your device as well.
Click to expand...
Click to collapse
I was trying to get him to download via his computer to see if the downloading via his phone was causing bad flashes.
Spastic909 said:
You can download roms from dev section from your device as well.
As far as the op..what do you mean you downloaded from a youtube video and you don't trust people who past roms? If you don't trust people don't mess with it. The devs here aren't going to brick you phone..that's a mistake on your end or you not paying attention to what you were flashing
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Correct me if I'm wrong but if i remember correctly it is extremely difficult to brick ones phone. The worst possible thing that could happen is if your phone some how died during a flash half way through. You can easily boot into bootloader, enter recovery and attempt to do it again.
With CWM you can mount the sd card in the mounts and storage settings so if you forgot or somehow deleted the Rom Zip from your card you can easily and safely access your card using CWM
i'm having the same issue
i have the phone rooted, s-off, and hboot installed
i'll boot into rom manager, wipe the data/cache, install the rom i want, reboot device... i get the white htc screen for about 5 seconds and then the phone restarts.
when it restarts, i get the white htc screen and then it boots into rom manager
what could be causing this? i had my previous g2 rooted and never had these issues when i was flashing roms
If this has been asked before then please forgive me...
I can not go back to any backup I had of CM7 or Gingerbread Sense ROM since upgrading to some Alpha ICS roms. I've tried wiping everything & started from scratch on these roms but I always get stuck at "failed to write boot partition from /tmp/boot.img" It doesn't matter what Gingerbread ROM I choose with the exception of MIUI rom (don't know why). I thought maybe I could use that as a stepping stone to go back from there but nogo. I've used RA's recovery & CWM with no success. Any ideas?
davidnjessicacruz said:
If this has been asked before then please forgive me...
I can not go back to any backup I had of CM7 or Gingerbread Sense ROM since upgrading to some Alpha ICS roms. I've tried wiping everything & started from scratch on these roms but I always get stuck at "failed to write boot partition from /tmp/boot.img" It doesn't matter what Gingerbread ROM I choose with the exception of MIUI rom (don't know why). I thought maybe I could use that as a stepping stone to go back from there but nogo. I've used RA's recovery & CWM with no success. Any ideas?
Click to expand...
Click to collapse
I would recommend tracking down calkulins format zip for the evo
1brainsurgeon said:
I would recommend tracking down calkulins format zip for the evo
Click to expand...
Click to collapse
Yeah... tried that already... Didn't fix it...
davidnjessicacruz said:
If this has been asked before then please forgive me...
I can not go back to any backup I had of CM7 or Gingerbread Sense ROM since upgrading to some Alpha ICS roms. I've tried wiping everything & started from scratch on these roms but I always get stuck at "failed to write boot partition from /tmp/boot.img" It doesn't matter what Gingerbread ROM I choose with the exception of MIUI rom (don't know why). I thought maybe I could use that as a stepping stone to go back from there but nogo. I've used RA's recovery & CWM with no success. Any ideas?
Click to expand...
Click to collapse
I can say with certainty that I don't have this problem. I've flashed every ROM from here to Timbuktu, AOKP, Deck's, Evervolv, and have had no problem restoring a nandroid of, or flashing MikG, Mik3D, MikRunny, The Express, or any other ROM I may have forgotten.
That boot partition error doesn't sound good, though. What HBOOT version do you use?
Captain_Throwback said:
I can say with certainty that I don't have this problem. I've flashed every ROM from here to Timbuktu, AOKP, Deck's, Evervolv, and have had no problem restoring a nandroid of, or flashing MikG, Mik3D, MikRunny, The Express, or any other ROM I may have forgotten.
That boot partition error doesn't sound good, though. What HBOOT version do you use?
Click to expand...
Click to collapse
HBOOT 0.97 is what I'm still using... never upgraded... should I & how do you recommend that I do so?
davidnjessicacruz said:
HBOOT 0.97 is what I'm still using... never upgraded... should I & how do you recommend that I do so?
Click to expand...
Click to collapse
No reason to upgrade - just wondering.
I'd recommend you flash a stock ROM in the bootloader - that should normalize everything, and then try those other ROMs again.
Captain_Throwback said:
No reason to upgrade - just wondering.
I'd recommend you flash a stock ROM in the bootloader - that should normalize everything, and then try those other ROMs again.
Click to expand...
Click to collapse
I assume your talking about in the recovery (aka amon ra/ clockworkmod), if so then I've tried that as well. Same issue.... This is not sounding good for me.
davidnjessicacruz said:
I assume your talking about in the recovery (aka amon ra/ clockworkmod), if so then I've tried that as well. Same issue.... This is not sounding good for me.
Click to expand...
Click to collapse
I believe he's talking about a RUU
Sent from my PC36100 using XDA App
evo4gnoob said:
I believe he's talking about a RUU
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
The stock one? Wow... don't even know how to flash that back.... hmm... I'll see if I can find it here, if not then I'll google it. I'll keep you informed.... hopefully bricking does not ensue.... any help here would be great as well
davidnjessicacruz said:
The stock one? Wow... don't even know how to flash that back.... hmm... I'll see if I can find it here, if not then I'll google it. I'll keep you informed.... hopefully bricking does not ensue.... any help here would be great as well
Click to expand...
Click to collapse
In the first "My Links" link in my sig, there are 3 of them.
They're PC36IMG files - you rename the file to exactly that - PC36IMG.zip - and put the file on the root of your sd card. Then you reboot your device into bootloader (HBOOT) mode. From a powered off state, hold the Volume down button and then press and hold the power button until you see the HBOOT screen. The file should be recognized and loaded, and after a minute or so it will ask you to update. Press Volume Up to accept, and then wait for a while.
NOTE: This will upgrade your HBOOT, but that's no big deal. The phone will reboot into the bootloader once near the beginning of the process by itself - that is also okay. Don't touch anything while it's updating.
At the end of the process, you'll need to find a PC36IMG for your preferred recovery (RA-supersonic-v2.3 recommended), which you will flash the same way as the ROM (in fact, you can replace the ROM file with the recovery file - unless you want to hold on to it, then you can just move or rename it).
Captain_Throwback said:
In the first "My Links" link in my sig, there are 3 of them.
They're PC36IMG files - you rename the file to exactly that - PC36IMG.zip - and put the file on the root of your sd card. Then you reboot your device into bootloader (HBOOT) mode. From a powered off state, hold the Volume down button and then press and hold the power button until you see the HBOOT screen. The file should be recognized and loaded, and after a minute or so it will ask you to update. Press Volume Up to accept, and then wait for a while.
NOTE: This will upgrade your HBOOT, but that's no big deal. The phone will reboot into the bootloader once near the beginning of the process by itself - that is also okay. Don't touch anything while it's updating.
At the end of the process, you'll need to find a PC36IMG for your preferred recovery (RA-supersonic-v2.3 recommended), which you will flash the same way as the ROM (in fact, you can replace the ROM file with the recovery file - unless you want to hold on to it, then you can just move or rename it).
Click to expand...
Click to collapse
Failed on #4 Boot.... it stated "failed - PU" "Partition failed" Fun times.... Now the phone is a brick (stuck at the white screen).... Where there is a will then there is a way so I'll find a way.... any help would be appreciated though....
Sooo... I was able to flash back my alternate recovery using a PC36IMG version of it. Thank god for the rooted community.... Restoring back my last backup. Funny though, that I still could not restore a rooted stock backup I had or a new upgraded .zip that I wanted to use. Common denominator in all this (even when trying to use the 4.24.651.1 version of the stock software PC36IMG), it can not write the boot.img Any one else had this problem? Next I will try to RUU which will technically make me lose root but I should be able to get it back, assuming I'm successful, since I still have S-OFF.
PS: My HBOOT now, btw, is 2.16.0001 so I know that the original attempt to get back to gingerbread was succesful
Hi All, let me start with a warning…
total Android n00b here, doing his first ROM flash on a newly rooted T-Mobile G2. I’ve read and searched a bit in the forum threads to see if I could solve this on my own, but I do need help.
VISION PVT SHIP S-OFF
HBOOT - 0.82.0000 (PC1010000)
MICROP - 0425
RADIO - 26.02.01.15_M2
eMMC - boot
Aug 20 2010, 16:51:01
This is from using the instructions in Strawmetal’s PDF guide to Downgrading from Gingerbread to Froyo and Root. I am working with a G2 phone that was set to Factory Reset before rooting, so there is no user data to backup or worry about.
1. I downloaded the Andromadus Mimicry 1.1.2 ROM image, and verified the md5 checksum on my sdcard using the AFV Legacy application. The Gapps image also was verified as well.
2. Using ROM Manager 5.0.0.8 from the Google Market, I ran Clockwork Recovery to install the Andromadus image. I left all settings on defaults and the installer ran fine.
3. When it restarted, I was left stuck at the white HTC screen for ages… the longest I left it was 20 mins. After that, I pulled the battery and restarted. Same white HTC screen.
4. I tried using Volume (+) key and Power On to get back to Clockwork Recovery, but the phone vibrated (buzzed) 3x times quickly, and the Power LED lamp pulsed an amber color. Again, yank battery, restart, same white HTC screen.
5. finally I decided to read more of the help for adb, and found the command “adb reboot-bootloader”. This let me get into the default Recovery mode, and it proceeded to find the PC10IMG.zip I still had on the sdcard from doing the Froyo downgrade. Recovery checked it out, ran it and restored the stock Froyo image and my phone did a proper restart. WHEW.
After that, I had to run adb to install the hboot recovery image file, and the busybox checksums were valid according to Strawmetal’s PDF instructions to get permanent root back after restoring the stock Froyo image.
I have done this process about 4 times, and am really good at typing inside adb now
But I’m lost…
-did I pick a ROM that doesn’t work with the G2? Other posters to the forum thread appear to be using the HTC Vision or G2.
-is ROM Manager not a good way to install a ROM?
-when I tried to get back into Recovery, what do the 3x buzzes/amber power LED mean?
-I never got to install the Gapps image; was I supposed to install that first, then the ROM image?
I imagine I did something wrong (duh!), but I can’t spot it. If someone can help me through this, I’d appreciate some advice very much.
thanks!
Rather than clockwork, use 4EXT recovery, much better for our device. ROM manager and clockwork have grown very iffy over the past year. Don't use rom manager to install a rom, download the zip yourself and manually install it in recovery.
Next you need to find the "superwipe+ext4.zip" floating around here, it is indispensable for FULLY wiping your phone when switching roms.
Mimicry works fine on the G2, in fact everything (except a few sense roms that need a Desire Z hboot) in the development section runs fine on the G2.
So....get the ROM, GApps for that ROM, the Superwipe zip (you will flash this right before you begin flashing the rom) on your SD card and make sure you are using 4EXT recovery (find the link in the dev section).
Make sure before you do ANYTHING you make a Nandroid backup (using your recovery).
Your issue is actually addressed in the Mimicry OP, please read it first. That said, the problem is almost certainly because you're coming from GB without a full wipe. You can use 4ext to repartiton/wipe all, or you can use superwipe+ext4 as mentioned by Nospin.
Sent from my HTC Vision using xda premium
Hi Nospin,
Thank you very much for your suggestions!
I will revise my root and remove Clockwork, and switch to 4EXT instead.
I appreciate the idea of "superwipe"; I will look for that as well today.
If I understand everything right...
-replace CWM with 4EXT
-place superwipe.zip, Gapps.zip and the Mimicry ROM.zip on the top level of the sdcard first.
-reboot the phone and run 4EXT recovery
-select superwipe to run first, then the ROM and then Gapps
-then restart the phone
When I used CWM before to install the ROM, it rebooted on its own before I could install Gapps. Will 4EXT let me do each install right after each other or do I have to return to 4EXT for each separate install?
regards,
motionmonk
Nospin said:
Rather than clockwork, use 4EXT recovery, much better for our device. ROM manager and clockwork have grown very iffy over the past year. Don't use rom manager to install a rom, download the zip yourself and manually install it in recovery.
Next you need to find the "superwipe+ext4.zip" floating around here, it is indispensable for FULLY wiping your phone when switching roms.
Mimicry works fine on the G2, in fact everything (except a few sense roms that need a Desire Z hboot) in the development section runs fine on the G2.
So....get the ROM, GApps for that ROM, the Superwipe zip (you will flash this right before you begin flashing the rom) on your SD card and make sure you are using 4EXT recovery (find the link in the dev section).
Make sure before you do ANYTHING you make a Nandroid backup (using your recovery).
Click to expand...
Click to collapse
Hi blk_jack,
I went back to the Mimicry page and re-read the FAQ section.
I think what I got out of it the first time was that if the ROM flash failed, it could be a corrupt ROM image. I will definitely use 4EXT to repartition before I try again with a ROM flash.
I guess I am still getting used to the terms for everything; can 4EXT do the nandroid backup? or is there a better process for setting that up?
thank you!
motionmonk
blk_jack said:
Your issue is actually addressed in the Mimicry OP, please read it first. That said, the problem is almost certainly because you're coming from GB without a full wipe. You can use 4ext to repartiton/wipe all, or you can use superwipe+ext4 as mentioned by Nospin.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Yes, you should be able to flash the rom and then GApps without rebooting. Give me a few and I will send you a PM with a few links....
Shot you a PM.
Thanks! I'll check it out :good:
Nospin said:
Shot you a PM.
Click to expand...
Click to collapse
Update-not working
Ok...
I re-flashed back to stock Froyo, and did a permanent root.
Installed 4ext Recovery (instead of Clockwork), and got a copy of SuperwipeG2+ext4;
I copied new checksum'd copies of Mimicry 1.1.2 ROM and GApps to my sdcard.
Booted into 4ext Recovery and installed from .zip the SuperwipeG2+ext4 file.
System, data and cache are all converted to ext4 partitions.
Wiped the system and data and cache partitions.
Installed from inside Recovery the Mimicry ROM and then the GApps archives.
No errors reported.
Upon reboot, I still get the white HTC screen. UGH.
I've left it on in that state for 30 mins... I had to yank the battery after that in shame...
I have tried to make sure that I read up on background steps, and I feel I do understand the overall process, but something is still getting in the way. I am doing this as I mentioned in an earlier post on a factory reset G2 with a clean erased SD card (has the stock Froyo image, Andromadus Mimicry ROM and GApps only). There is no SIM card installed either, wifi is off (to avoid OTA upgrade requests).
Are there other things I can try, or info I can supply that would help? I think I'm so close to getting this done... I must be overlooking something obvious.
I run that by rom along with Cm9 beta..... Try adding that to your boot process. Just Cm9 beta..... Other than version of crash.... That's just what I have experienced
Sent from my HTC Vision using xda premium
Hi amogil,
Just to be sure I understand, are you saying you are swapping between Andromadus and CM9 beta on your phone?
Did you flash CM9 first? and then Andromadus?
or just carrying the CM9 beta image and running Andromadus?
Sorry, I'm all sorts of confused here lol
thanks
amogil said:
I run that by rom along with Cm9 beta..... Try adding that to your boot process. Just Cm9 beta..... Other than version of crash.... That's just what I have experienced
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Ugh....it's frustrating isn't it?
Can you boot into any other rom? For example if you downloaded CM7.2? If you don't have any problems we can eliminate some possibilities.....
I had a similar problem booting into Mimicry my first time, in that I could get past the white HTC screen but after that my screen would just go black. After a couple frustrating hours what ended up working for me was downloading the older version (1.1.1 I think?) and that booted up fine . Then after letting that boot I went back into recovery and flashed 1.1.2 without wiping (I might have wiped cache and dalvik...). Everything worked great after that. Not the same problem as you, but similar.....
It's definitely a thought, and I believe that's what amogil is telling me too...
Ya, I can try a different ROM and report back.
I guess I should go back to stock Froyo and then start from CM7.2, and if that boots, try Mimicry again?
-from the Andromadus FAQ, it says it if a different ROM is based on ICS9, you shouldn't have to wipe. But with CM7, I'd have to wipe the Dalvik cache, yes?
-since CM7 is obviously not based on ICS9, would being able to launch into that show some details I can't see at present? Just was curious.
Or, do you think it better to go stock Froyo and then the older Mimicry ROM?
Either way, I'll make sure that I use the Superwipe to set things to ext4 first.
thanks guys for the ideas,
motionmonk
Nospin said:
Ugh....it's frustrating isn't it?
Can you boot into any other rom? For example if you downloaded CM7.2? If you don't have any problems we can eliminate some possibilities.....
I had a similar problem booting into Mimicry my first time, in that I could get past the white HTC screen but after that my screen would just go black. After a couple frustrating hours what ended up working for me was downloading the older version (1.1.1 I think?) and that booted up fine . Then after letting that boot I went back into recovery and flashed 1.1.2 without wiping (I might have wiped cache and dalvik...). Everything worked great after that. Not the same problem as you, but similar.....
Click to expand...
Click to collapse
The boot.img should be the issue for a rom to not boot from the. Htc whitescreen. My guess is that you have a false s-off.
Sent from my HTC Vision using xda premium
SUCCESS!
Woohoo!
It works!
Since I had an ICS9 ROM already in place and was planning to wipe back to stock anyways, I tried flashing the older Andromadus 1.1.0 ROM.
What a surprise and treat to see the startup animation!
After poking around for an hour inside it, I then tried Recovery to reflash to the newest 1.1.2 ROM.
YAY! It works!
OMG, having a new ROM is like having a new phone-- there are so many improvements to the UI and it's quick and speedy versus GB. Dang, I'm happy now :victory:
Observations:
1. I did notice that inside Recovery, my touchscreen was barely functional when I tried to update from 1.1.0 up to 1.1.2-- I had to use the Volume +/- and the d-pad button to make selections. After the flash, the touchscreen is as responsive as ever.
2. it's got me thinking, that there must be a setting that is expected in the v1.1.2 ROM that the v1.1.0 ROM installed. Or could something else be the issue? I mean absolutely no disrespect to the developers... but on the technical side, I'm just curious what possibilities exist that might lead to this situation.
3. backup question... when I use MyBackup Pro, I know I can make an archive of the apps I've installed, and an archive of the data (documents, music, settings). Is a nandroid backup different from that? when I see the backup/restore options inside of 4ext Recovery, what are those doing that's different from what I get from MyBackup Pro?
thanks for all the help and encouragement. I have a new ROM installed! :good:
strawmetal said:
The boot.img should be the issue for a rom to not boot from the. Htc whitescreen. My guess is that you have a false s-off.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Oooh, a possibility. We will see if he can boot a different rom.
Whenever you switch roms (even if they are using the same Android version as a base) I suggest a full wipe. (Wipe all user data + Dalvik Cache + Cache, or just flash the superwipe zip). When upgrading the rom you are currently on (say upgrading CM Nightlies or going from Mimicry 1.1.1 to 1.1.2) you only need to really wipe cache and dalvik cache. Unless the dev states otherwise of course.
Hi strawmetal,
It turns out that I did have s-off after all...
1. after one of the many attempts to flash the ROM image and restoring back to stock Froyo, I said that "I'm gonna start this entire process over to be sure." So I get stuck using the fre3vo tool for about 30 minutes, rebooting and trying different address ranges to find the exploit.
Never found one... oh no, what did I do to the phone now??
-then it hit me; if it can't find an exploit... then it must already been used!
2. also, I did check each time I was in bootloader that my S-OFF was there and the radio and hboot were not changing versions.
3. Hehe, and the best indication was... being able to boot up finally!
I also have your Strawmetal.CM.V6.zip on my sdcard; if the downflash (?) to the Andromadus older ROM didn't work, yours was the CM7 image I wanted to try. If it's ok, I think I want to play around inside CM9 for a bit and then try yours out after that. I don't want to overwhelm my poor brain!
thank you for your suggestion... that definitely would be something to check as well.
strawmetal said:
The boot.img should be the issue for a rom to not boot from the. Htc whitescreen. My guess is that you have a false s-off.
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Thank You All!
A big shout out to:
Nospin
blk_jack
amogil
strawmetal
for taking the time out to help a total n00b stumble through his first ROM flash.
I really appreciate the points you guys made, and the help provided.
Thank you!
I hope that one day I can help someone else out with a problem and pass the kindness forward.
Yay! I have a working ROM!
motionmonk
motionmonk said:
Hi strawmetal,
It turns out that I did have s-off after all...
1. after one of the many attempts to flash the ROM image and restoring back to stock Froyo, I said that "I'm gonna start this entire process over to be sure." So I get stuck using the fre3vo tool for about 30 minutes, rebooting and trying different address ranges to find the exploit.
Never found one... oh no, what did I do to the phone now??
-then it hit me; if it can't find an exploit... then it must already been used!
2. also, I did check each time I was in bootloader that my S-OFF was there and the radio and hboot were not changing versions.
3. Hehe, and the best indication was... being able to boot up finally!
I also have your Strawmetal.CM.V6.zip on my sdcard; if the downflash (?) to the Andromadus older ROM didn't work, yours was the CM7 image I wanted to try. If it's ok, I think I want to play around inside CM9 for a bit and then try yours out after that. I don't want to overwhelm my poor brain!
thank you for your suggestion... that definitely would be something to check as well.
Click to expand...
Click to collapse
The bootloader can show a false s-off. I've personally experienced this. By the time "HTCDev bootloader unlock" came out i was already rooted. But as curious as I was I decided to try it out. Flashed an RUU ( my my why would I do that ) Got back s-on( guess this was false too) then I used HTCDev method to prove i'm a total noob. Then i relocked it using Nipqer's guide and followed setherio's method again. I was able to use the stock froyo, but no other rom would boot( false s-off being the culprit ). This time I ran to #g2root on freenode. Nipqer saved me.
WOW. i just realized there is SO MUCH I need to catch up on!
I'll have to look up some of these guides later today... but the RUU is the ROM upgrade, right?
Did you ever find a reason why you got the false S-OFF flag? It's clear that the way I was looking at the failed fre3vo exploit as proof of S-OFF isn't always going to be true... but how would you separate a false S-OFF flag from lets say a wrong hboot image?
BTW, your PDF on downgrading and rooting the G2 was a godsend. Very very helpful and clear.
One of the reasons why I took so long to try rooting was that I was confused by the different methods and the replies of X not working, Y is a better way... going through your guide and the info here on xda cleared alot of things up. :good:
strawmetal said:
The bootloader can show a false s-off. I've personally experienced this. By the time "HTCDev bootloader unlock" came out i was already rooted. But as curious as I was I decided to try it out. Flashed an RUU ( my my why would I do that ) Got back s-on( guess this was false too) then I used HTCDev method to prove i'm a total noob. Then i relocked it using Nipqer's guide and followed setherio's method again. I was able to use the stock froyo, but no other rom would boot( false s-off being the culprit ). This time I ran to #g2root on freenode. Nipqer saved me.
Click to expand...
Click to collapse
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
SectorNine50 said:
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
Click to expand...
Click to collapse
Is it possible that your hosts file needs modifying when installing the AT&T ROM? If the LG Support tool connects to LG's servers instead of your local http you set up, it will load the official ICS and completely wipe your phone to install that ROM... With my limited amount of knowledge, that's about all I could see if the process removes CWM Recovery.
Also, CWM 6.x is working fine for me, even manually flashed the touch recovery a few minutes ago, backed up my ROM and installed an updated ROM. No problems at all.
SectorNine50 said:
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
Click to expand...
Click to collapse
I don't know if anyone has tried the unbrick method with the new version of cwm but you might try twrp. When a similar version of cwm was in beta there were all sorts of issues. So maybe they haven't been fixed. Also are you installing cwm from GB? ICS has a locked boot loader so that might also be an issue.
http://forum.xda-developers.com/showthread.php?t=1888910
Now I would start with the unbricking guide for a 16th time but follow the directions to install twrp instead of cwm. You might also find you like it better. Good luck.
Sent from my LG-P930 using xda app-developers app
lordcheeto03 said:
Is it possible that your hosts file needs modifying when installing the AT&T ROM? If the LG Support tool connects to LG's servers instead of your local http you set up, it will load the official ICS and completely wipe your phone to install that ROM... With my limited amount of knowledge, that's about all I could see if the process removes CWM Recovery.
Also, CWM 6.x is working fine for me, even manually flashed the touch recovery a few minutes ago, backed up my ROM and installed an updated ROM. No problems at all.
Click to expand...
Click to collapse
I don't believe that the unbricking process would work if the hosts file was wrong, but I checked it again anyway, and it appears to be correct.
The AT&T ROM gets pushed via the abd shell after the unbrick and rooting process. The root appears to work, as the AT&T ROM that I push works fine, it's just not the ROM I want!
Swetnes said:
I don't know if anyone has tried the unbrick method with the new version of cwm but you might try twrp. When a similar version of cwm was in beta there were all sorts of issues. So maybe they haven't been fixed. Also are you installing cwm from GB? ICS has a locked boot loader so that might also be an issue.
http://forum.xda-developers.com/showthread.php?t=1888910
Now I would start with the unbricking guide for a 16th time but follow the directions to install twrp instead of cwm. You might also find you like it better. Good luck.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
After the unbricking process (after I get through all the nonsense on the Korean ROM), the phone is running the GB AT&T ROM, from there I push the CWM recovery.img to the phone using the abd shell. All seems to be working perfectly up until I go to flash the custom ROM! I don't get any errors when I flash the .zip either.
Initially I had installed CWM 6.x.x.x using the ROM Manager application. That's before all this nonsense started, and the phone was on the stock (but rooted) AT&T ICS ROM, so I know that's why I "bricked" my phone the first time.
I'll give TWRP a shot, hopefully that will work.
SectorNine50 said:
I don't believe that the unbricking process would work if the hosts file was wrong, but I checked it again anyway, and it appears to be correct.
The AT&T ROM gets pushed via the abd shell after the unbrick and rooting process. The root appears to work, as the AT&T ROM that I push works fine, it's just not the ROM I want!
After the unbricking process (after I get through all the nonsense on the Korean ROM), the phone is running the GB AT&T ROM, from there I push the CWM recovery.img to the phone using the abd shell. All seems to be working perfectly up until I go to flash the custom ROM! I don't get any errors when I flash the .zip either.
Initially I had installed CWM 6.x.x.x using the ROM Manager application. That's before all this nonsense started, and the phone was on the stock (but rooted) AT&T ICS ROM, so I know that's why I "bricked" my phone the first time.
I'll give TWRP a shot, hopefully that will work.
Click to expand...
Click to collapse
Ok so we know it's not the boot loader issue of ICS after dozens if not hundreds of successful installs using the unbricking guide the only thing left is the new version of cwm. Hopefully twrp will do the trick for you. Has anyone out there successfully completed the unbricking guide with the new version of cwm?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ok so we know it's not the boot loader issue of ICS after dozens if not hundreds of successful installs using the unbricking guide the only thing left is the new version of cwm. Hopefully twrp will do the trick for you. Has anyone out there successfully completed the unbricking guide with the new version of cwm?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I haven't tried the TWRP recovery a shot yet, since I haven't been home, but I figured it was worth pointing out that the CWM 5.x.x.x (can't remember exact version numbers right now) didn't work for me either. Every time I flashed a ROM, I'd end up with a boot loop on first boot, and then when I'd try to go back into recovery, I'd find that it wouldn't go back in there either.
It was basically acting like when I flashed the ROM that it overwrote the recovery partition, except no one else seems to have this same issue. Yet, if I didn't flash a ROM, I was able to go in and out of CWM recovery as often as I wanted.
Bah.
SectorNine50 said:
I haven't tried the TWRP recovery a shot yet, since I haven't been home, but I figured it was worth pointing out that the CWM 5.x.x.x (can't remember exact version numbers right now) didn't work for me either. Every time I flashed a ROM, I'd end up with a boot loop on first boot, and then when I'd try to go back into recovery, I'd find that it wouldn't go back in there either.
It was basically acting like when I flashed the ROM that it overwrote the recovery partition, except no one else seems to have this same issue. Yet, if I didn't flash a ROM, I was able to go in and out of CWM recovery as often as I wanted.
Bah.
Click to expand...
Click to collapse
Can you clarify exactly what method you are using to flash the ROM? I just can't imagine a scenario where flashing a ROM would overwrite the recovery. What ROM are you flashing?
Also, please confirm what phone you have.
drumist said:
Can you clarify exactly what method you are using to flash the ROM? I just can't imagine a scenario where flashing a ROM would overwrite the recovery. What ROM are you flashing?
Also, please confirm what phone you have.
Click to expand...
Click to collapse
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
SectorNine50 said:
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
Click to expand...
Click to collapse
You are correct, the Nitro is P930. And I'm sure this doesn't need pointing out, but when you download the ROM, make sure it's for P93x and not SU640. Most of the ROMS in the developer section have versions for both models.
Also, when you say you can't access CWM after flashing a ROM, how are you trying to access it? Holding Power+Volume down until the Factory Reset screen pops up? It still shows that screen even with CWM installed, but when you press the power button to perform the factory reset it SHOULD take you into CWM Recovery instead.
SectorNine50 said:
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
Click to expand...
Click to collapse
To access recovery, turn the device completely off. (If you're in a bootloop, pull battery or hold power button for ~20 seconds until screen stays off.) Then when phone is off, press and hold volume down and power buttons at the same time, not releasing until you see text asking if you want to factory reset. Press power button twice to confirm and you'll get to recovery.
Is this the method you're using to try to get to CWM?
My guess as to why you are getting bootloops is that you aren't wiping data first.
Yup, that's how I'm accessing CWM. After the flash, after I press the power button twice, I get something similar to a boot loop. A recovery boot loop, if you will.
Well, I've tried a couple ways now. I've tried using the "factory reset/wipe user data" menu item in CWM, and I've tried going into each partition and wiping them individually before flashing as well.
Just got home, I'll try flashing using the TWRP and let you guys know.
SectorNine50 said:
Yup, that's how I'm accessing CWM. After the flash, after I press the power button twice, I get something similar to a boot loop. A recovery boot loop, if you will.
Well, I've tried a couple ways now. I've tried using the "factory reset/wipe user data" menu item in CWM, and I've tried going into each partition and wiping them individually before flashing as well.
Just got home, I'll try flashing using the TWRP and let you guys know.
Click to expand...
Click to collapse
Good luck. Other possible things to try:
1) Check zip MD5 hash (or just redownload and replace) to make sure it's not corrupted.
2) Reformat entire SD card.
Interesting update:
I decided to give getting back into CWM recovery one more shot before I went through the process of re-unbricking again, and this time it managed to get in (for whatever reason).
So, I did a factory wipe, cleared dalvik cache, flashed the ParanoidAndroid ROM, backed out, did another factory wipe, and tried to reboot into the newly flashed ROM.
No luck. Boot looped, and didn't even get to the ROM animation. Following that, I had trouble getting back into the CWM recovery. Managed to try about 5 times and finally got in, however CWM stated:
Code:
CWM-based Recovery v5.0.2.7
E:Error in /cache/recovery/last_log
(Read-only file system)
So... my phone may have potentially unrooted it's self, somehow... Interestingly, it still shows the file systems as mounted.
So, now I'm doing a full SD card reformat. Figured I'd get that variable out of the way before I go any further.
SectorNine50 said:
Interesting update:
I decided to give getting back into CWM recovery one more shot before I went through the process of re-unbricking again, and this time it managed to get in (for whatever reason).
So, I did a factory wipe, cleared dalvik cache, flashed the ParanoidAndroid ROM, backed out, did another factory wipe, and tried to reboot into the newly flashed ROM.
No luck. Boot looped, and didn't even get to the ROM animation. Following that, I had trouble getting back into the CWM recovery. Managed to try about 5 times and finally got in, however CWM stated:
Code:
CWM-based Recovery v5.0.2.7
E:Error in /cache/recovery/last_log
(Read-only file system)
So... my phone may have potentially unrooted it's self, somehow... Interestingly, it still shows the file systems as mounted.
So, now I'm doing a full SD card reformat. Figured I'd get that variable out of the way before I go any further.
Click to expand...
Click to collapse
You are installing the wrong version of CWM. Never use anything older than 5.8.2.0. This is the one you want: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-p930.img
Anything older than that is known to not work.
Second thing: You seem to have an incorrect understanding of what "root" means. Having "root" simply means you have administrator access to your current ROM. When you install a new ROM, whether you had root access to your old ROM is meaningless frankly.
drumist said:
You are installing the wrong version of CWM. Never use anything older than 5.8.2.0. This is the one you want: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-p930.img
Anything older than that is known to not work.
Second thing: You seem to have an incorrect understanding of what "root" means. Having "root" simply means you have administrator access to your current ROM. When you install a new ROM, whether you had root access to your old ROM is meaningless frankly.
Click to expand...
Click to collapse
Ah, thank you! I must've been viewing an old thread. Now that I look at the version number, it appears that's the version I had been hunting for since the newest one didn't work.
Interesting, I most certainly misunderstood, I was under the impression that "rooting" the device was a filesystem level permission change. Good to know!
It seems like we are getting closer to a solution here. Thanks for your patience!
Well, that appears to have been my problem the whole time! That's kind of embarrassing, considering how much time I sunk into this and how simple the solution was!
Anyway, thank you all very much! I assume that TWRP would have also solved my problems as well. It would seem that both the older and newest versions of CWM have some problems (at least for me!).
SectorNine50 said:
Well, that appears to have been my problem the whole time! That's kind of embarrassing, considering how much time I sunk into this and how simple the solution was!
Anyway, thank you all very much! I assume that TWRP would have also solved my problems as well. It would seem that both the older and newest versions of CWM have some problems (at least for me!).
Click to expand...
Click to collapse
Yeah, the new one (6.0.1.5) just came out. I'll have to test it to see if it works for me.
For what it's worth, I haven't had any issues with 6.0.1.5 yet. The touch version is a must, though.
Malnilion said:
For what it's worth, I haven't had any issues with 6.0.1.5 yet. The touch version is a must, though.
Click to expand...
Click to collapse
Have you had a chance to compare to twrp?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Have you had a chance to compare to twrp?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I really enjoy the integration Rom Manager/CM Updater has with CWM. If twrp is capable of running the install scripts those two use, I might consider trying it out, but I don't really like manually going through the steps to flash a rom every day.
Hey Guys Thank You For Taking A Look At My Thread.Lets Cut To The Chase.I Have A HUGE PROBLEM with my Replacement Incredible 2.I Rooted my phone with Tacoroot,and everything was fine.Flashed Condemed CM7.2 and started realizing i didn't like it as much,so i made a BACKUP just in case i wanted to return to the CM goodness.Went to TSMTrinity's Sense 2.1 Version 4.5 S,and here's where the problem started happening. After I set up everything on my Sense 2.1 ROM,i backed it up,the screen would get to the boot animation,get past the boot animation,id see my lock screen for 1 SECOND,and then it would start the bootup again.seeing as this was a problem,i WIPED All Cache and Factory Reset/Wipe Data on My Revolutionary Recovery.Then,I Restored the 2.1 Backup that i created and everything was fine again.Then again,i decided to Flash Mikrunny's Sense 3.5 ROM,which after i set up,worked fine,UNTIL YESTERDAY.I was driving in my car yesterday,listening to music on The STOCK HTC Music app on Sense 3.5,and the phone rebooted on its own.And it would not stop until i took the battery out.I got home,charged the battery for a bit,(shut down that is),then headed to recovery.I took out the SD card and rebooted the phone,but no luck.tried this rebooting process for an hour,until i decided to wipe cache and factory reset to my 2.1 ROM BACKUP.it works,but i just wanna know,am i doing something noobingly wrong when backing up and restoring roms? Also,i use Revolutionary's Backup,or I think its called Nandroid,to do backups and restores,and ROM MANAGER to edit their names and delete them.Also,an added side to his problem,when i boot to the Hboot screen,when it loads,for a few of the items it says,missing or wrong image.could that be the problem?? THANK YOU SO MUCH WHO REPLIES AND HELPS.:crying:
DroidUser_Wind said:
Hey Guys Thank You For Taking A Look At My Thread.Lets Cut To The Chase.I Have A HUGE PROBLEM with my Replacement Incredible 2.I Rooted my phone with Tacoroot,and everything was fine.Flashed Condemed CM7.2 and started realizing i didn't like it as much,so i made a BACKUP just in case i wanted to return to the CM goodness.Went to TSMTrinity's Sense 2.1 Version 4.5 S,and here's where the problem started happening. After I set up everything on my Sense 2.1 ROM,i backed it up,the screen would get to the boot animation,get past the boot animation,id see my lock screen for 1 SECOND,and then it would start the bootup again.seeing as this was a problem,i WIPED All Cache and Factory Reset/Wipe Data on My Revolutionary Recovery.Then,I Restored the 2.1 Backup that i created and everything was fine again.Then again,i decided to Flash Mikrunny's Sense 3.5 ROM,which after i set up,worked fine,UNTIL YESTERDAY.I was driving in my car yesterday,listening to music on The STOCK HTC Music app on Sense 3.5,and the phone rebooted on its own.And it would not stop until i took the battery out.I got home,charged the battery for a bit,(shut down that is),then headed to recovery.I took out the SD card and rebooted the phone,but no luck.tried this rebooting process for an hour,until i decided to wipe cache and factory reset to my 2.1 ROM BACKUP.it works,but i just wanna know,am i doing something noobingly wrong when backing up and restoring roms? Also,i use Revolutionary's Backup,or I think its called Nandroid,to do backups and restores,and ROM MANAGER to edit their names and delete them.Also,an added side to his problem,when i boot to the Hboot screen,when it loads,for a few of the items it says,missing or wrong image.could that be the problem?? THANK YOU SO MUCH WHO REPLIES AND HELPS.:crying:
Click to expand...
Click to collapse
1..update your recovery which is probly clockwork mod....i suggest you get your phone usable for a few minutes and go to 4ext.net and download and install that..its touch based recovery or also check out twrp if you want an alt if you dont like it
2....update your radio ...newest one can be found in the venom rom thread i think there are directions there http://forum.xda-developers.com/showthread.php?t=1953899
3.....wipe everything ....check out my wipe script in the dev section if you want max cleanification http://forum.xda-developers.com/showthread.php?t=2013242
4...flash what ever rom...if you like sense use viper i hear good things or check out my incredibly paranoid rom or all the other roms ..pick your poison
chillybean said:
1..update your recovery which is probly clockwork mod....i suggest you get your phone usable for a few minutes and go to 4ext.net and download and install that..its touch based recovery or also check out twrp if you want an alt if you dont like it
2....update your radio ...newest one can be found in the venom rom thread i think there are directions there http://forum.xda-developers.com/showthread.php?t=1953899
3.....wipe everything ....check out my wipe script in the dev section if you want max cleanification http://forum.xda-developers.com/showthread.php?t=2013242
4...flash what ever rom...if you like sense use viper i hear good things or check out my incredibly paranoid rom or all the other roms ..pick your poison
Click to expand...
Click to collapse
DUDE.THANK YOU so MUCH FOR REPLYING.Ill try what you told me tonight,and ill let you know how it goes down.thanks again chills.:good:
chillybean said:
1..update your recovery which is probly clockwork mod....i suggest you get your phone usable for a few minutes and go to 4ext.net and download and install that..its touch based recovery or also check out twrp if you want an alt if you dont like it
2....update your radio ...newest one can be found in the venom rom thread i think there are directions there http://forum.xda-developers.com/showthread.php?t=1953899
3.....wipe everything ....check out my wipe script in the dev section if you want max cleanification http://forum.xda-developers.com/showthread.php?t=2013242
4...flash what ever rom...if you like sense use viper i hear good things or check out my incredibly paranoid rom or all the other roms ..pick your poison
Click to expand...
Click to collapse
What OP wrote applies to me as well. I am looking for something better than aerovan's CM9 (which has been my DD), and thought I would give Viper a try. Without fail, bootlooping (which I could have guessed since I did tacoroot and this seems to be an issue with sense based roms).
That said, I tried steps 1 through 4 and the bootlooping stopped in Viper - it goes through startup and just shuts down before leaving the boot screen. One strange thing that I noticed is that the ICS Firmware/radio with Viper (which I loaded in CWM), wouldn't load in 4ext. Maybe I'll give paranoid a go if I can't resolve this bootlooping issue in Viper! I hope OP has better luck.
U don't flash radio in cwm..look for a how to.. can't explain I'm working sry
Sent from my Incredible 2 using xda app-developers app
I'm not as knowledgeable as Chilly, but a thought did occur to me. if the cm9 rom included a kernel on the flash and then you went to a sense based rom that didn't include a kernel that could cause a problem. I believe that I read that cm using a kernel that is asop based while sense roms use a different based kernel. You may check to see what kernel you have and then check for the recomended kernel for that rom and flash that kernel. don't forget to wipe.
Jasonp0 said:
I'm not as knowledgeable as Chilly, but a thought did occur to me. if the cm9 rom included a kernel on the flash and then you went to a sense based rom that didn't include a kernel that could cause a problem. I believe that I read that cm using a kernel that is asop based while sense roms use a different based kernel. You may check to see what kernel you have and then check for the recomended kernel for that rom and flash that kernel. don't forget to wipe.
Click to expand...
Click to collapse
All of the roms come with a kernel for our phone, but certainly, don't flash a sense kernel with aosp or vice versa after rom flash. Chilly is right. Flashing a newer radio should fix the problem and the radio is flashed with a PG32IMG.zip in the bootloader, not in the recovery.
gtdtm said:
All of the roms come with a kernel for our phone, but certainly, don't flash a sense kernel with aosp or vice versa after rom flash. Chilly is right. Flashing a newer radio should fix the problem and the radio is flashed with a PG32IMG.zip in the bootloader, not in the recovery.
Click to expand...
Click to collapse
Good call. When chilly said you don't flash kernels in recovery I hit my head. I flashed the radio, but now my challenge is getting back into recovery since I renamed the file and bootloader always finds it and wants to reboot or I load CM9 which stays on flash screen. I'll figure something out, maybe with adb. Thanks.
Power down, pop the sd out, boot to recovery, rename file, profit.
gtdtm said:
Power down, pop the sd out, boot to recovery, rename file, profit.
Click to expand...
Click to collapse
Didn't think of that. adb did the trick though. In business with VenomInc!
Thank you all.
digitalshepard said:
Didn't think of that. adb did the trick though. In business with VenomInc!
Thank you all.
Click to expand...
Click to collapse
good lucking going back to aosp lol
almost thesame problem
chillybean said:
U don't flash radio in cwm..look for a how to.. can't explain I'm working sry
Sent from my Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
i made a stupid mistake of flashing radio in recovery, in fact the radio is for Samsung at&t and now my phone vibrates it doesnt show htc quietly brilliant, only vibrates and orange light with black screen untill i pull out the battery... i was able to return to stuck and it can only boot if its connected to power, it doesn't read sd card while android is booted and in recovery to, only in bootloader it reads sd... error in mounting if i try to... i flashed RUU.exe 2.3.3 and 2 other RUUs for my droid inc 2 but it keeps vibrating... please help me!!! thanks
I made the same mistake when i first gained s-off for my dinc2. the thing with the venom rom tho is if you ever want to go back to aosp ull need to gets chill's anti-venom zip and flash it through recovery because doing a normal wipe wont do the trick. also a helpful trick that worked for me with roms if i ever start getting boot loops i go into recovery from the bootloader menu and i wipe the dalvik cache under advanced and then wipe the chache under mounts and storage and it always works like a charm for me. but ive also learned that you have to be careful which kernel you flash with the rom of your choice because not only will it cause lags if you happen to get past the boot animation to the main screen but in some cases it can cause breaks in your framework like your wifi data etc. im not an expert tho those are just suggestions that im familiar with because theyve already happened to me before. hope this helps in any way.