Develop Bugs

[Q] One X Vodafone

Hi Guys
Its been a while since I've been on here so here goes.
I had my Nexus 4 stolen yesterday so I am having to go back to my One X. When I was using my One X I was using Android Revolution ROM. I have since re-flashed it back to the original ROM that it came with on Vodafone however I seem to be unable to apply OTA updates.
I get told one is available but it fails to go through on Clockwork mod. - Signature failure.
Turn the verification for that off and i get an assert about the cid.
Not 100% sure what my original CID was and fastboot unfortunately doesnt tell me:
./fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 0.43.0000
(bootloader) version-baseband: None
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.161.2
(bootloader) serialno: HT23RW111860
(bootloader) imei: 359188041896481
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: None
(bootloader) battery-status: good
(bootloader) battery-voltage: 4158mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.828s
Can you guys offer any advice on how I can either get OTA updates working or get onto the latest Vodafone UK rom for my phone?
(Note, this phone has been powered off for almost a year)
Thanks

If the rom is stock you only need to flash back the stock recovery.
Or relock the bootloader and install this ruu
http://www.androidruu.com/getdownlo...Radio_1.1204.105.14_release_264070_signed.exe

Mr Hofs said:
If the rom is stock you only need to flash back the stock recovery.
Or relock the bootloader and install this ruu
http://www.androidruu.com/getdownlo...Radio_1.1204.105.14_release_264070_signed.exe
Click to expand...
Click to collapse
Thanks for the fast reply there - Just so I can cover all bases - do you know where I can get a copy of stock recovery?

Don't see the 1.26 stock recovery this fast maybe because it's rather old. Try the 1.29
https://www.dropbox.com/s/m89iozihc8wt2zk/Stock recovery 1.29.img
If it fails you can always use the full ruu

Mr Hofs said:
Don't see the 1.26 stock recovery this fast maybe because it's rather old. Try the 1.29
https://www.dropbox.com/s/m89iozihc8wt2zk/Stock recovery 1.29.img
If it fails you can always use the full ruu
Click to expand...
Click to collapse
Thank you - That recovery image seems to have let me install the update - I'll keep doing system updates until im all sorted
Many thanks!

Mate, please post here how far it went.
I also own a Vodafone HOX, and couldn't get an information if 4.2.2 update for this main version and cid went through.

[email protected]|-|oR said:
Mate, please post here how far it went.
I also own a Vodafone HOX, and couldn't get an information if 4.2.2 update for this main version and cid went through.
Click to expand...
Click to collapse
All the subsequent OTA updates have gone through no issues
now on:
Android Version: 4.2.2
Sense version: 5.0
Baseband version: 5.1204.164D3.31

Demented-Idiot said:
All the subsequent OTA updates have gone through no issues
now on:
Android Version: 4.2.2
Sense version: 5.0
Baseband version: 5.1204.164D3.31
Click to expand...
Click to collapse
Thank you. It was really fast.
One more question - which is your CID number? In first post it says
cidnum: None
Click to expand...
Click to collapse
Could you verify that using CID getter from Play Store?

[email protected]|-|oR said:
Thank you. It was really fast.
One more question - which is your CID number? In first post it says
Could you verify that using CID getter from Play Store?
Click to expand...
Click to collapse
VODAP001 it seems

Cool, now don't forget to make a stock backup when you decide to install a custom rom again !

[Q] New OTA, completely lost and frustrated!

Hi guys!
few days ago I got this new update (3.32.771.3) on my device but as I'm running TWRP I couldn't just update it so I found my stock recovery and tried running the update but it failed at around 30-35% with a red triangle.
I tried doing a factory reset and of course that didn't work either. Tried installing Viper ROM without luck. Everything seems so damn complicated, to run this you need this and that and to install that you need something else.
I'm so lost and frustrated, what do I do?
The device is S-OFF.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.000
(bootloader) version-baseband: 1.19.2133114
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: REMOVED
(bootloader) imei: REMOVED
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse

do u have a backup of your rom before u tried to update?

I have a backup but it's not very old, I made it like a month ago. After all these things didn't work I recovered to that backup.

ogward said:
I have a backup but it's not very old, I made it like a month ago. After all these things didn't work I recovered to that backup.
Click to expand...
Click to collapse
After recovering the backup, maybe try a factory reset with the stock recovery and proceed on with the OTA

Bobbi lim said:
After recovering the backup, maybe try a factory reset with the stock recovery and proceed on with the OTA
Click to expand...
Click to collapse
good to try

ogward said:
Hi guys!
few days ago I got this new update (3.32.771.3) on my device but as I'm running TWRP I couldn't just update it so I found my stock recovery and tried running the update but it failed at around 30-35% with a red triangle.
I tried doing a factory reset and of course that didn't work either. Tried installing Viper ROM without luck. Everything seems so damn complicated, to run this you need this and that and to install that you need something else.
I'm so lost and frustrated, what do I do?
The device is S-OFF.
Click to expand...
Click to collapse
You are super CID. Just update your firmware to the newest. The firmware you're using now is 4.4.3 based.
It's super simple. Go here to find out how.
Then load a 4.4.4 custom or stock ROM.
Easy peasy

Bobbi lim said:
After recovering the backup, maybe try a factory reset with the stock recovery and proceed on with the OTA
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately that didn't work.
xunholyx said:
You are super CID. Just update your firmware to the newest. The firmware you're using now is 4.4.3 based.
It's super simple. Go here to find out how.
Then load a 4.4.4 custom or stock ROM.
Easy peasy
Click to expand...
Click to collapse
I used this firmware and it seemed ok but now the device keeps rebooting and I have no signal.

ogward said:
Thanks for the reply. Unfortunately that didn't work.
I used this firmware and it seemed ok but now the device keeps rebooting and I have no signal.
Click to expand...
Click to collapse
Are you on Verizon? Because that is Verizon firmware.
You are super CID, so I would suggest non carrier specific firmware.

xunholyx said:
Are you on Verizon? Because that is Verizon firmware.
You are super CID, so I would suggest non carrier specific firmware.
Click to expand...
Click to collapse
No, I have a Swedish carrier, my original CID was h3g__G04 but I could not find anything of use for that CID.
Do You have a suggestion on which firmware I should use?
I also forgot to mention that when I ran that firmware from the previous post I change its MID to mine.
this is how the device looks now:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.00
(bootloader) version-baseband: 1.09.20.092
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.605.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *****************
(bootloader) imei: **************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse

ogward said:
No, I have a Swedish carrier, my original CID was h3g__G04 but I could not find anything of use for that CID.
I also forgot to mention that when I ran that firmware from the previous post I change its MID to mine.
this is how the device looks now:
Click to expand...
Click to collapse
You are super cid, so it doesn't matter UNLESS you pick firmware that is carrier specific.
I'm going to help you out here.
Download this with your phone.
Rename firmware to 0P6BIMG.zip (the first character is a zero, NOT A LETTER O)
Put renamed firmware.zip on your external_SD
Boot into hboot and let it update its firmware.
No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed firmware file to external_sd
After you have updated your firmware, make sure to remove the 0P6BIMG.zip from your external_sd because it will ask to update your firmware everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing firmware again).
Profit!
All credit for this goes to @skulldreamz.
I copied and pasted from his thread, because I didn't feel like typing it all out.
EDIT: And a huge edit buddy!
I just noticed your hboot is 3.19
You already have the newest firmware. LOf*ckingL!!

xunholyx said:
You are super cid, so it doesn't matter UNLESS you pick firmware that is carrier specific.
I'm going to help you out here.
...
Rename firmware to 0P6BIMG.zip (the first character is a zero, NOT A LETTER O)
Put renamed firmware.zip on your external_SD
Boot into hboot and let it update its firmware.
No PC, no adb, no fastboot, no terminal is needed, just a root explorer to rename and transfer the renamed firmware file to external_sd
After you have updated your firmware, make sure to remove the 0P6BIMG.zip from your external_sd because it will ask to update your firmware everytime your reboot to your bootloader which it is technically supposed to do but its unnecessary after you have done it once (unless you are planning on flashing firmware again).
Profit!
All credit for this goes to @skulldreamz.
I copied and pasted from his thread, because I didn't feel like typing it all out.
Click to expand...
Click to collapse
Thanks a lot!
I have a signal now and everything seems ok.
I'm on Android v. 4.4.3 (2.22.771.5) do you have any link to a guide or something how I can install 4.4.4 OTA or maybe Viper?

ogward said:
Thanks a lot!
I have a signal now and everything seems ok.
I'm on Android v. 4.4.3 (2.22.771.5) do you have any link to a guide or something how I can install 4.4.4 OTA or maybe Viper?
Click to expand...
Click to collapse
Are you sure?
Compare post #1 with post #9.
Go to fastboot (power + vol. down), and post what it says there.

xunholyx said:
Are you sure?
Compare post #1 with post #9.
Go to fastboot (power + vol. down), and post what it says there.
Click to expand...
Click to collapse
fastboot

ogward said:
fastboot
Click to expand...
Click to collapse
Yep. You've got the new firmware. Have fun with the 4.4.4 ROMs!
And yes, Viper is an excellent choice.

[Q] HOX stuck in bootloop and cannot restore stock ROM

Hi,
I've using CM 11 for a while on my HOX. I didn't have the backup of my original ROM. I didn't think I'd need to sell the phone but I wanted to and I was told to restore the stock ROM back. I thought I got the correct RUU and when I tried to flash (after relocking bootloader and erasing cache), I was told by RUU GUI that there was a bootloader version problem. Reading about it, I found that my HBOOT version is 1.72.0000 and the RUU showed something like 1.29.
After reading further I found that I was downgrading the HBOOT and for that I need to have S-OFF (I have S-ON).
I then extracted the ROM.zip file from the RUU and tried to flash the system.img and boot_signed.img files and found myself in a situation where the phone goes into a boot loader loop.
The battery has been dead and I'm also plagued by the power management bug in HOX ( doesn't charge at all and had to leave it on for days). Luckily it started charging again but since the phone goes into a bootloader loop, the battery is dying.
I found the fastboot-battery-recharge on this forum where I'm trickle charging it.
Can you help me flash the original ROM back by identifying the correct RUU (android files. org)?
My phone details:
F:\HOX>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.164D3.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.161.3
(bootloader) serialno: XXXX
(bootloader) imei: XXXX
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: low
(bootloader) battery-voltage: 3547mV
(bootloader) devpower: 0
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
I downloaded this RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
Would this work when the phone is charged?
Please assist as I want to sell the phone.
Thanks in advance guys.

The battery seems to have charged a little bit and I tried the RUU mentioned above, but it doesn't run fully. I get the initial messages to accept about battery being 30% etc, and then I'm shown the current image versoin 4.17.xxx and then the "Update" button. When I click it, the RUU just closes. I'm trying to download another RUU: RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed.exe
In case there was something wrong with the ROM..

The flashing of the second RUU failed this time with error 158. Incorrect RUU. So I went ahead and unlocked bootloader again and CM is back working now thankfully. I still don't know how to flash it with stock ROM correctly. I'm reading about downloading some Nandroid backups 3.20.x versions and restoring it.
I don't want to risk anymore, so please let me know.
Standing by.........

corpuscallosum said:
The flashing of the second RUU failed this time with error 158. Incorrect RUU. So I went ahead and unlocked bootloader again and CM is back working now thankfully. I still don't know how to flash it with stock ROM correctly. I'm reading about downloading some Nandroid backups 3.20.x versions and restoring it.
I don't want to risk anymore, so please let me know.
Standing by.........
Click to expand...
Click to collapse
You will never succsses to flash RUU no RUU for this high main version restore nandroid or install custom rom on it

Ok thank you. That clarifies about RUU flashing. I have downloaded 3.14 (VODAP0001) Nandroid from one of pages of this site and follow the instructions to flash. Hopefully I'll get stock ROM back then.
Do I need to have the stock recovery also? Is stock recovery required for OTA and when factory reset on the stock ROM it would revert back to factory state (going through setup process again)?

corpuscallosum said:
Ok thank you. That clarifies about RUU flashing. I have downloaded 3.14 (VODAP0001) Nandroid from one of pages of this site and follow the instructions to flash. Hopefully I'll get stock ROM back then.
Do I need to have the stock recovery also? Is stock recovery required for OTA and when factory reset on the stock ROM it would revert back to factory state (going through setup process again)?
Click to expand...
Click to collapse
3.14 will not work you will have problem with the tuch will not work you need nandroid with your numbers. Yes stock recovery is need for OTA but you are with latest base I think

Ok. I think I'm having trouble identifying the correct versions then. I thought 3.14 is the bootloader version. Is that the baseband version then?
Since I have 5.1204, do I need to download a Nandroid 5.1204 version?

Can i get some help please unbricking mine i cant seem to find the correct ruu any where ive already relocked the bootloader and now ive been stuck with out a phone for 2 weeks
X:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.164D3.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.161.3
(bootloader) serialno: SH25AW109670
(bootloader) imei: 354461055970384
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3793mV
(bootloader) devpower: 71
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.050s
this is all ive got id really apreciate any help

corpuscallosum said:
Ok. I think I'm having trouble identifying the correct versions then. I thought 3.14 is the bootloader version. Is that the baseband version then?
Since I have 5.1204, do I need to download a Nandroid 5.1204 version?
Click to expand...
Click to collapse
you need nand backup with this numbers 4.17.161.3 this with the red is important dont look your CID if you find nand with this numbers is the prfect like 4.18.401.4 this with the red is WWE region, in your case is 161 maybe this is Vodafone I don't know Germany or UK
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
RayOneX said:
Can i get some help please unbricking mine i cant seem to find the correct ruu any where ive already relocked the bootloader and now ive been stuck with out a phone for 2 weeks
X:\Fastboot>fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.72.0000
(bootloader) version-baseband: 5.1204.164D3.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.161.3
(bootloader) serialno: SH25AW109670
(bootloader) imei: 354461055970384
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3793mV
(bootloader) devpower: 71
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 1.050s
this is all ive got id really apreciate any help
Click to expand...
Click to collapse
If you read the hole thread you will see no RUU for this main version and unlock your bootloader and flash recovery and then custom rom or nand backup with this numbers 4.17.161.3

Thant said:
you need nand backup with this numbers 4.17.161.3 this with the red is important dont look your CID if you find nand with this numbers is the prfect like 4.18.401.4 this with the red is WWE region, in your case is 161 maybe this is Vodafone I don't know Germany or UK
---------- Post added at 11:34 PM ---------- Previous post was at 11:33 PM ----------
If you read the hole thread you will see no RUU for this main version and unlock your bootloader and flash recovery and then custom rom or nand backup with this numbers 4.17.161.3
Click to expand...
Click to collapse
Can i please get help doing this with a step by step instruction list or even links please
---------- Post added at 05:38 PM ---------- Previous post was at 05:29 PM ----------
RayOneX said:
Can i please get help doing this with a step by step instruction list or even links please
Click to expand...
Click to collapse
Nandroid Backup 4.17.161.2 CID VODAP001 thanks to alextheg will this be okay its from this page http://forum.xda-developers.com/showthread.php?t=1975140

Thant, thanks. I guess 4.17.161.3 is for me. I'll see if there's a uk based VODAP001.
I will use this: 4.17.161.2 CID VODAP001. Will follow the steps mentioned where I got the Nand backup itself.

wohoo!! I got the 'stock' ROM back!! Thanks Thant! You're brilliant! I also copied the recovery.img from the Nand backup. Can I flash that with cmd: "fastboot flash recovery recovery.img"? Can I erase cache and relock bootloader to see if I get OTA? Is that the correct way forward?

corpuscallosum said:
wohoo!! I got the 'stock' ROM back!! Thanks Thant! You're brilliant! I also copied the recovery.img from the Nand backup. Can I flash that with cmd: "fastboot flash recovery recovery.img"? Can I erase cache and relock bootloader to see if I get OTA? Is that the correct way forward?
Click to expand...
Click to collapse
you need stock recovery not this in the backup search for stok recovery for your base or download OTA and choice install later then take the recovery from OTA and flash it

Fixed!! HOX stuck in bootloop and cannot restore ROM
Perfect! I choose install later when the OTA came up on the phone, connected it to my computer and navigated to the download folder on my phone. Found the file : "OTA_ENDEAVOR_U_JB_50_S_Vodafone_UK_4.17.161.3-4.17.161.2_release_369941".
Extracted recovery.img from the firmware.zip file within, copied to my computer, put the phone in fastboot mode and flashed the recovery using command: fastboot flash recovery recovery.img.
That was it. Rebooted the phone and installed the OTA without any issues!!
It back to factory state. Thanks a million Thant!!

corpuscallosum said:
Perfect! I choose install later when the OTA came up on the phone, connected it to my computer and navigated to the download folder on my phone. Found the file : "OTA_ENDEAVOR_U_JB_50_S_Vodafone_UK_4.17.161.3-4.17.161.2_release_369941".
Extracted recovery.img from the firmware.zip file within, copied to my computer, put the phone in fastboot mode and flashed the recovery using command: fastboot flash recovery recovery.img.
That was it. Rebooted the phone and installed the OTA without any issues!!
It back to factory state. Thanks a million Thant!!
Click to expand...
Click to collapse
Good to hear that

WiFi issues since flashing latest ARHD

I followed the instructions fine and never hit a snag, upgrading from Android 4.4.4 stock but rooted to the latest ARHD running Android 5.0.1. I'm not sure if the issue is related to the lollipop update or the rom but once my phone screen locks I lose my WiFi connection. I can go into WiFi and see the available networks, select my one and click connect but nothing happens, the only way to get WiFi working again is to restart the phone which is becoming really frustrating. I have tried forgetting the network then re adding it too but the issue remains. Anyone else had this problem or know of a fix?
On a less annoying note when iIstart up it first acts like it's loafing bootloader with the red text at the bottom of the screen then restarts itself and boots fine.

Firmware Update
Stock rom - ota or s-off flash fastboot
Htc One M8 & Tapatalk

linar10 said:
Firmware Update
Stock rom - ota or s-off flash fastboot
Htc One M8 & Tapatalk
Click to expand...
Click to collapse
Thanks, could you help a little more? I have been reading up but dont fully understand how i know which firmware i need to flash?

enter result of this command
fastboot getvar all
Edit
I suggest you read this topic
http://forum.xda-developers.com/showthread.php?t=2800727
Htc One M8 & Tapatalk

Thanks for getting back to me - I have read that thread but it still doesn't seem to tell me how i work out which firmware I need or im being silly?
If you can point me in the right direction, here was my result:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Also could I get it to install under ARHD but with the stock recovery instead of TWRP?
linar10 said:
enter result of this command
fastboot getvar all
Edit
I suggest you read this topic
http://forum.xda-developers.com/showthread.php?t=2800727
Htc One M8 & Tapatalk
Click to expand...
Click to collapse

t3stin said:
Thanks for getting back to me - I have read that thread but it still doesn't seem to tell me how i work out which firmware I need or im being silly?
If you can point me in the right direction, here was my result:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH43VWM09276
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Also could I get it to install under ARHD but with the stock recovery instead of TWRP?
Click to expand...
Click to collapse
Your HTC is WWE and your bootloader is at 3.19 so i suggest to restore a stock backup from here
http://forum.xda-developers.com/showthread.php?t=3086860
Take the 4.16.401.10, that will work. And if you also put back the stock recovery you can also perform official OTA updates.
READ the opening post very carefully as its very good explained !

1.22 radio - firmware 3xxxx
Hboot 3.19 - firmware 3xxx - 4xxxx
Restore backup 3xxx
Flash stock recovery
Ota
Htc One M8 & Tapatalk

Im now back to stock, running the latest firmware - no more updates available and though it was fixed but the wifi has just dropped out and had to restart to get it back (I can see the network it just will not connect). Does this mean it is a Lollipop issue?
Mr Hofs said:
Your HTC is WWE and your bootloader is at 3.19 so i suggest to restore a stock backup from here
http://forum.xda-developers.com/showthread.php?t=3086860
Take the 4.16.401.10, that will work. And if you also put back the stock recovery you can also perform official OTA updates.
READ the opening post very carefully as its very good explained !
Click to expand...
Click to collapse

This backup restore
https://mega.nz/#!uoMHBCZQ!167M3qO9hYCMpeB-aFBrYXgJB459c_bM8I9WJt5Cc7g
Recovery stock
https://mega.nz/#!61llVa5Z!cUFoUaQBRCjX0YOA24GogtkhS_nkMMSK_erc5JvK3lM
Htc One M8 & Tapatalk

t3stin said:
Im now back to stock, running the latest firmware - no more updates available
Click to expand...
Click to collapse
Does that mean you installed an OTA update after returning to stock nandroid and stock recovery?

redpoint73 said:
Does that mean you installed an OTA update after returning to stock nandroid and stock recovery?
Click to expand...
Click to collapse
Correct..

restoring backup which version, if 4xxx restore that which I have given above
Htc One M8 & Tapatalk

t3stin said:
Correct..
Click to expand...
Click to collapse
Post the current getvar all.
Also, you should delete the serial number from your last getvar all (and the new one, of course) as that is personal info.
You may need to OTA again. I think some OTAs had WiFi broken, even on fully stock devices; and it was fixed on a subsequent OTA.

If you restore a backup 4xx10 and made Ota to 4xx13 he did not update the firmware. Must restore the backup 3xxx and make ota. This will solve the problems with wifi.
HtcOneM8 @ Tapatalk

linar10 said:
If you restore a backup 4xx10 and made Ota to 4xx13 he did not update the firmware. Must restore the backup 3xxx and make ota. This will solve the problems with wifi.
Click to expand...
Click to collapse
I was thinking along those lines (why I asked for updated getvar data) as the radio number indicates 3.xx firmware.
But I am surprised up updated at all, with the improper (old) firmware.

I do not see any other reason malfunction wifi, in addition to hardware failure.
The last ota was not large, so it may be that it could be downloaded. Let's wait author may write off something that already everything is running or not
HtcOneM8 @ Tapatalk

Sorry havent been able to get online since - I just tried to download the files you linked to and they are no longer available?
linar10 said:
This backup restore
https://mega.nz/#!uoMHBCZQ!167M3qO9hYCMpeB-aFBrYXgJB459c_bM8I9WJt5Cc7g
Recovery stock
https://mega.nz/#!61llVa5Z!cUFoUaQBRCjX0YOA24GogtkhS_nkMMSK_erc5JvK3lM
Htc One M8 & Tapatalk
Click to expand...
Click to collapse

tried restoring to a 3.xxx and im stuck on the boot screen.
redpoint73 said:
I was thinking along those lines (why I asked for updated getvar data) as the radio number indicates 3.xx firmware.
But I am surprised up updated at all, with the improper (old) firmware.
Click to expand...
Click to collapse

gone back to 4.xxx took the OTA again - getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.13
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: f063fb42
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
redpoint73 said:
Post the current getvar all.
Also, you should delete the serial number from your last getvar all (and the new one, of course) as that is personal info.
You may need to OTA again. I think some OTAs had WiFi broken, even on fully stock devices; and it was fixed on a subsequent OTA.
Click to expand...
Click to collapse

Android Revolution no Wifi

Hey guys,
today I flashed the android Revolution 4.4.4 KitKat version on my htc one m8.
It worked great but I can't turn on my wifi.
So I searched the internet for that issue and all I found is that i should update my firmware.
But I cant because my phone is s-on.
Can someone tell me which firmware I have? or how I can figure it out?
This is what the output looks like:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXX
(bootloader) imei: 357871051126202
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
thanks in advance

Cr1TiKa7 said:
So I searched the internet for that issue and all I found is that i should update my firmware.
But I cant because my phone is s-on.
Can someone tell me which firmware I have?
Click to expand...
Click to collapse
Why cannot ? You can do OTA updates as they will update your firmware.
Restore 1.54.206.10 nandroid and install 1.54.206.10 stock recovery.img then OTA updates.
Read the backup thread linked in my signature.

ckpv5 said:
Why cannot ? You can do OTA updates as they will update your firmware.
Restore 1.54.206.10 nandroid and install 1.54.206.10 stock recovery.img then OTA updates.
Read the backup thread linked in my signature.
Click to expand...
Click to collapse
The problem is that I cant get into the trwp recovery menu. It stuck at the htc logo with the text "entering recovery..."

Cr1TiKa7 said:
The problem is that I cant get into the trwp recovery menu. It stuck at the htc logo with the text "entering recovery..."
Click to expand...
Click to collapse
First you said you can't because the device is S-On, now it's different reason.
Read the backup thread ... use correct TWRP version.
Or you can go the RUU way ...
http://forum.xda-developers.com/showpost.php?p=63024353&postcount=6
Option 1 is RUU method
Option 2 - just ignore, won't work for you
You need these - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4

ckpv5 said:
First you said you can't because the device is S-On, now it's different reason.
Read the backup thread ... use correct TWRP version.
Or you can go the RUU way ...
http://forum.xda-developers.com/showpost.php?p=63024353&postcount=6
Option 1 is RUU method
Option 2 - just ignore, won't work for you
You need these - http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
Click to expand...
Click to collapse
Thank you so much! I flashed a working twrp version and followed the tutorial in your backup & restore thread. Worked great. Thanks!

Cr1TiKa7 said:
Thank you so much! I flashed a working twrp version and followed the tutorial in your backup & restore thread. Worked great. Thanks!
Click to expand...
Click to collapse
You need to delete your IMEI from the top post. This is private info, and should never be posted online.