Develop Bugs

[Q] HTC Desire DEAD after ROM flashed... need help plz

Hej,
Hopefully you all are fine and good in health...............
Now come to the point actually i had problem with my HTC Desie that was stuck up with its initial screen i mean when i turn on my phone it shows the htc logo then stuck up. Then i tried many times to hard reset but it could not work either, after that i download ROM "RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00 .32U_5.11.05.27_release_151783_signed.exe" and run from my pc (running windows 7) but after 65 % i got error during updating process and the utility shows how to recover it then according to the instructoins what i did is
1. Unplug my phone (dissconnect from pc)
2. Remove battery for 3 sec and plug it again.
3. Turn on the phone
4. Plug the USB (connect phone again)
but on the 3rd step when i plugged the battery it won't turn on neither charge or in short totally dead nothing happened to it .
I am requesting to all of you please please please suggest me what to do now, how can it work, how to turn it on again ............ is it bricked ??? if bricked then how to solve this problem ????.
Waiting for your responses......
Thanks in advance.

Be more specific.
- Can you still acces your recovery?
- If not, do you have a carrier specific rom? If so, download that rom, go into the bootloader, choose fastboot and run the rom. You can try this method also if you don't have a carrier specific rom.
Look here for a rom.
http://www.shipped-roms.com/index.php?category=android&model=Bravo

Lennyz1988 said:
Be more specific.
- Can you still acces your recovery?
- If not, do you have a carrier specific rom? If so, download that rom, go into the bootloader, choose fastboot and run the rom. You can try this method also if you don't have a carrier specific rom.
Look here for a rom.
http://www.shipped-roms.com/index.php?category=android&model=Bravo
Click to expand...
Click to collapse
no i don't have any access to recovery, because phone is not turn on how can i run this rom when phone is not connected or not power on........
by the way thanks for your suggestion.....

Hej,
After long discussion with HTC customer service and trying to convince them that the phone is not in water or in any wet place but they said that they found my phone or take my phone as liquid damage so my phone is out of warranty .
As they said that it has symptoms of liquid damage which turn white color of sticker into red/pink color. I even don't no how come but any how leave this.
Come to point, what can i do now my phone won't start i opened it disassemble then assemble everything but it won't power on even not charge ............
i am still stuck up with it even no idea what to do more
Need some suggestions can i order its flex cable or board or other stuff or what to do ??? how to power it on ???
Waiting for your response.
Thanks in advance.

arif01 said:
As they said that it has symptoms of liquid damage which turn white color of sticker into red/pink color. I even don't no how come but any how leave this.
Click to expand...
Click to collapse
Sorry, no idea for your original problem, but some small explanation where your so called water damage may come from. A friend of mine once had the same problem with a camera. The stickers can change color because of air-moisture. Especially if you carry the phone in your pocket and it is hot, your sweat leads to damp air in you pocket and affects those stickers.
I would try to argue with the htc support that it is not ok that keeping your cell phone in your pocket leads to a water damage. Perhaps they give in.
I wish you good luck with your phone.
mblaster
€: Here some link to back up my argumentation: http://www.wisegeek.com/what-is-a-water-damage-sticker.htm

You could try this...
arif01 said:
no i don't have any access to recovery, because phone is not turn on how can i run this rom when phone is not connected or not power on........
by the way thanks for your suggestion.....
Click to expand...
Click to collapse
You're problem sounds pretty similar to mine that I managed to solve. See my thread... http://forum.xda-developers.com/showthread.php?t=927702 (post #5).
Hope this helps.
Rich

babblerx said:
You're problem sounds pretty similar to mine that I managed to solve. See my thread... http://forum.xda-developers.com/showthread.php?t=927702 (post #5).
Hope this helps.
Rich
Click to expand...
Click to collapse
Thanks bro but the problem is my phone is not turn on , no power , no usb detection. Today i installed skd and used adb shell command but it says device not found what can i do more i dont understand
Please suggest me my friends.
Thanks in advance.

[Q] Need help unbricking new phone

Hey guys, this is my first time on this site, I was given this forum from a friend. Anyways, I just had an upgrade today with spring to their Samsung Galaxy S2. I attempted to root the new phone using Heimdall because it was compatible with my Mac instead of Odin. Somewhere along the root the phone became bricked with a flashing blue LED light. I'm unable to get anywhere with it, I've tried to remove the battery for an extended amount of time, attempted to get back to the download screen via volume down & power. The battery was at full charge during the root so I'm not quite sure what went wrong. Any help or suggestions would be greatly appreciated!

Volume down+home button+power to download mode
Sent from my GT-I9100 using Tapatalk 2

jhow2319 said:
Hey guys, this is my first time on this site, I was given this forum from a friend. Anyways, I just had an upgrade today with spring to their Samsung Galaxy S2. I attempted to root the new phone using Heimdall because it was compatible with my Mac instead of Odin. Somewhere along the root the phone became bricked with a flashing blue LED light. I'm unable to get anywhere with it, I've tried to remove the battery for an extended amount of time, attempted to get back to the download screen via volume down & power. The battery was at full charge during the root so I'm not quite sure what went wrong. Any help or suggestions would be greatly appreciated!
Click to expand...
Click to collapse
Blue LED light?
As far as I know the I9100 doesnt have a blue led light. Looks like your in wrong fourm.
Its likely you have flashed incorrect files to your device and if so you have probably corrupted your bootloader resulting in you needing to open device and flash correct one via JTAG connection.
What model of GS2 do you have?
What rom did you try and flash?

TheATHEiST said:
Blue LED light?
As far as I know the I9100 doesnt have a blue led light. Looks like your in wrong fourm.
Its likely you have flashed incorrect files to your device and if so you have probably corrupted your bootloader resulting in you needing to open device and flash correct one via JTAG connection.
What model of GS2 do you have?
What rom did you try and flash?
Click to expand...
Click to collapse
I have the galaxy s2 epic 4g touch, is there another forum specifically for this? Apologies if I'm in the wrong one.
I don't know which rom I tried to flash because the video tutorial I used wasn't as clear as I needed it to be. I had a feeling it would cause a problem using heimdall for Mac instead of Odin for Windows.

jhow2319 said:
I have the galaxy s2 epic 4g touch, is there another forum specifically for this? Apologies if I'm in the wrong one.
I don't know which rom I tried to flash because the video tutorial I used wasn't as clear as I needed it to be. I had a feeling it would cause a problem using heimdall for Mac instead of Odin for Windows.
Click to expand...
Click to collapse
That is not a I9100.
This is the forum you need to be in.
Also, in future stay away from sh1ty video guides on video sites/blogs etc unless its a linked one from XDA.

TheATHEiST said:
That is not a I9100.
This is the forum you need to be in.
Also, in future stay away from sh1ty video guides on video sites/blogs etc unless its a linked one from XDA.
Click to expand...
Click to collapse
Thanks for your help!

Help... I think I hard bricked my phone!

My phone was having some problems flashing ROMs so I tried everything to get it to flash. It would only flash Samsung ROMs, no CM based ROMs. One of the things I did was to flash a modem/bootloader that was for the T999; I have the T999L. After it successfully installed, I rebooted my phone and it never turned on again. I tried holding the power button and multiple combinations of the volume and power buttons with no success. I tried switching out the battery with no success as well. When I plug it into the computer with a USB cord the red LED light comes on and the computer makes a sound. Other than that, the phone wont turn on. I was running 4.3 Stock ROM before it was hard bricked, was rooted and had TWRP 2.3.3.0... Please help.

That was stupid, you're hard bricked

kristibaee said:
My phone was having some problems flashing ROMs so I tried everything to get it to flash. It would only flash Samsung ROMs, no CM based ROMs. One of the things I did was to flash a modem/bootloader that was for the T999; I have the T999L. After it successfully installed, I rebooted my phone and it never turned on again. I tried holding the power button and multiple combinations of the volume and power buttons with no success. I tried switching out the battery with no success as well. When I plug it into the computer with a USB cord the red LED light comes on and the computer makes a sound. Other than that, the phone wont turn on. I was running 4.3 Stock ROM before it was hard bricked, was rooted and had TWRP 2.3.3.0... Please help.
Click to expand...
Click to collapse
If you can't get into download mode then it is likely you are hard bricked. For future reference, flashing bootloaders/modems for phones that do not have your exact model number is extremely risky and shouldn't be attempted. Do you still have a warranty? If it can't be turned on, that most likely means they won't be able to see that it was rooted and should replace it.

fingolfin14 said:
If you can't get into download mode then it is likely you are hard bricked. For future reference, flashing bootloaders/modems for phones that do not have your exact model number is extremely risky and shouldn't be attempted. Do you still have a warranty? If it can't be turned on, that most likely means they won't be able to see that it was rooted and should replace it.
Click to expand...
Click to collapse
I think my warranty ended about a month ago -__-

kristibaee said:
My phone was having some problems flashing ROMs so I tried everything to get it to flash. It would only flash Samsung ROMs, no CM based ROMs. One of the things I did was to flash a modem/bootloader that was for the T999; I have the T999L. After it successfully installed, I rebooted my phone and it never turned on again. I tried holding the power button and multiple combinations of the volume and power buttons with no success. I tried switching out the battery with no success as well. When I plug it into the computer with a USB cord the red LED light comes on and the computer makes a sound. Other than that, the phone wont turn on. I was running 4.3 Stock ROM before it was hard bricked, was rooted and had TWRP 2.3.3.0... Please help.
Click to expand...
Click to collapse
Let's all take a deep breath. We all make mistakes one time or the other. Even if the Device is hardbricked, does not mean you'd have to replace it.
@kristibaee please follow this De-Bricking thread. There's a video tutorial. Do note, you have most likely only one chance to bring the phone back. So please read everything on that thread before attempting.
Since you had Stock 4.3 before, you must use a 4.3 image to De-Brick. There's one posted on that thread.
NOTE - I suspect that your attempt to flash different bootloader on top of the 4.3 bootloader would have possibly blown your E-Fuse. If that's the case, then there is a possibility that De-Bricking may fail. But don't draw conclusion without attempting.

Perseus71 said:
Let's all take a deep breath. We all make mistakes one time or the other. Even if the Device is hardbricked, does not mean you'd have to replace it.
@kristibaee please follow this De-Bricking thread. There's a video tutorial. Do note, you have most likely only one chance to bring the phone back. So please read everything on that thread before attempting.
Since you had Stock 4.3 before, you must use a 4.3 image to De-Brick. There's one posted on that thread.
NOTE - I suspect that your attempt to flash different bootloader on top of the 4.3 bootloader would have possibly blown your E-Fuse. If that's the case, then there is a possibility that De-Bricking may fail. But don't draw conclusion without attempting.
Click to expand...
Click to collapse
Thanks! Ill give it a try. Can you post the link one more time please? Thank you

kristibaee said:
Thanks! Ill give it a try. Can you post the link one more time please? Thank you
Click to expand...
Click to collapse
What the De-Brick Thread ? Apology my link was broken.
http://forum.xda-developers.com/showthread.php?t=2439367

[Q] I think I completely bricked (?) my phone[SOLVED]

I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.

potatobobguy said:
I recently picked up the Z1 Compact, and since it was pretty easy to root and customize I dived into those sorts of things for the first time. For a while I had Cyanogenmod and made a back up and left it on my SD card. Later when the easy root method came out I switched back to stock. I installed dual recovery and made a back up. Some time later ,using my ever so careful brain, I tried to flash my Cyanogenmod back up instead of the stock back up. This leads me to where I am now. Can't get my phone into flash mode. When I hold down the power button it vibrates but nothing else. When I plug the phone into a power source it just keeps flashing a red notification light. I would really appreciate some help in fixing my phone, thank you.
Click to expand...
Click to collapse
this guy had a similar problem, take a look, at this thread

Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.

potatobobguy said:
Oh wow that helps so much. I guess my googling skills were not on point when I first tried to find a solution. My phone is completely fine now.
Click to expand...
Click to collapse
Such a great news :good:
You can update thread name with [Solved] tag I guess, It may help somebody else

The f*ck
Tonio78r said:
this guy had a similar problem, take a look, at this thread
Click to expand...
Click to collapse
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?

Alan Revuelta said:
This leads to another post, which leads to anoher post. How can I get my hard-bricked Z1c back?
Click to expand...
Click to collapse
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.

potatobobguy said:
If you bricked it the same way I did as described above, just try to enter flashmode and flash a stock ftf using Flashtool , the page linked shows you how.
Click to expand...
Click to collapse
Flasmode doesn't work.

red magic 5g black screen how to fix?

Hi,,
I have a rooted red magic 5 International version that I am trying to update it, since I am new to this stuff I tried one of videos that led me to a black screen. I tried to charge, press power and volume buttons and there is no response. so please if any one can help me or suggesting anything to do will make me glad.
Thanks

RedMagic999 said:
Hi,,
I have a rooted red magic 5 International version that I am trying to update it, since I am new to this stuff I tried one of videos that led me to a black screen. I tried to charge, press power and volume buttons and there is no response. so please if any one can help me or suggesting anything to do will make me glad.
Thanks
Click to expand...
Click to collapse
I need help too.

You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device then unbrick.

zayidhs said:
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device then unbrick.
Click to expand...
Click to collapse
I did try all the Unbricked tools from XDA. Nothing work. Seems like when it start flashing it disconnect the phone.

Salor123 said:
I did try all the Unbricked tools from XDA. Nothing work. Seems like when it start flashing it disconnect the phone.
Click to expand...
Click to collapse
Its mean?y device
zayidhs said:
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device t
Click to expand...
Click to collapse
Its mean my devuce us aldo briked coz of my prblm as like same i was also try to local update i just copy and paste zip other directry and install to update then my device is shutdown i hv try many time to turn on but no response
" i just want to knw its possible to fix or not..