Develop Bugs

[Q] Samsung t989 Galaxy S II - Bootloop HELP please :(

I downloaded the Jedi Mind Trick JB 2 ROM and installed it via clocwork mod recovery .. That went fine but it took me a few days to realize I didnt have a working video camera anymore on my phone.. so I thought to flash a stock ROOTed rom instead...
Then I found this threat about an updated version of Jedi Mind Trick's ROM labled JB 3.. So I wiped as much as I could in recovery and chose to format all the options it gave me in recover , Format system , data , cache , emms(or something) .. and now when I boot the phone , it shows the first flash screen , and the samsung logo starts to shimmer then it reboots back to the splash screen and repeats this process everal times before just going black and sitting there..
So I've successfully bootlooped my phone doing this..
MY PROBLEM -- I don't know how to charge my phone or connect to it to install anything else..
Is this a serious problem? How can I charge my phone to continue troubleshooting it? It still has some battery to try some things but I don't know how to hook it up to transfer any other roms to it via USB cable and PC in it's current state..
I'm very computer savvy but I'm trying to learn this phone modding stuff and I realy hope I didn't brick my phone in this process.
Can someone please help me out here? I'll be on the forums religiously until I figure this out.
What should I start doing first??
Any help would be greatly appreciated!! Thanks!

still working at it
I think I'm at the point of having to use ODIN to flash a new rom since i cannot simply copy this rom to the sdcard to use clockwork to flash it .. Am I correct on this ?
For some reason this rom I found (should be stock rooted tmobile gSII rom) does not want to open from ODIN's PDA button cause its in .zip and not .tar or anything... I'm not sure how to flash this rom with ODIN ( I'm not even 100% sure this is how its supposed to go) Any suggestions ?

phew
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.

zarklon said:
UPDATE - So I managed to research enough to find out that there is no way to flash a CUSTOM rom with ODIN.. SO I had to download a stock (presumably rooted) t-mobile rom and flash THAT ...
Now I'm back up with a rooted rom and will begin re-installing clockwork and then my custom deodexed rooted rom afterward.
Thanks for all who almost kinda tried to care to reply in this past 2 hours =) -- As previously mentioned.. I am a nerd.. I just suck at phone modding. Haha
So , looks like I'm in the clear now and don't need any more support on this particular topic yet.
Click to expand...
Click to collapse
Is this true? Through a recommendation (haven't done anything to my phone from rooting/flashing KANGSJUGGERNAUT2 years ago), I tried to flash CM10 and ended up with a bootloop myself. Tried flashing through ODIN but it kept crashing; does anyone know why?
Afterward, I tried to reflash it through CWM and from then on bootloops into a installation process that never completes.
For some reason my CWM turned super slow, freezes/hangs and reboots after a few minutes.
I gave the phone to a friend who does this stuff on the regular but he said my initial flash wasn't complete cause in download mode says I'm still running official? No clue.
I was told this via email/chat: "No luck, it won't even boot anymore, I think I'll just bring it back tmrw morn
10:43 PM
Sorry I'm at a wedding (yea I know random) I left my phone with coat check
OK I've narrowed down the reason but not the solution, you had an AOKP based ROM which fundamentally is based on CyanogenMod, but it wasn't correctly flashed as the phone still thought it has factory ROMs still running
11:10 PM
Clockworkmod(even though it was working before) wasn't accessing the partitions of the phone correctly so it wasn't properly wiping or flashing properly.
11:12 PM
So basically from the first time you flashed cwm it didn't flash properly then the next time you flashed using the new recovery it didn't flash anything it was supposed to do itself properly , so basically it was a chain of events in addition to a bad boot loader, that's why it never went to recovery or download mode correctly
11:13 PM
That's something that had to do with the way the phone was built meaning you may of had a bad bootloader from the very begin and are now feeling the synptoms
Basically, and I would hate to be the reason or partially the reason you have a dead phone, basically it was a matter of coincedencr that it happened as this could of happened at anytime, once you have a bad boot loader its pretty much down hill from there"
Any helpful insight as how I can rectify this? is my phone truly dead? Sorry about the quoted format, it was copied and pasted.

If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta

tronmech said:
If I were in your boat, I'd use Odin and flash the stock 4.1.2 ROM.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?

JahJahLoO said:
The phone won't turn on, unable to go into recovery and download mode; plugged in usb (hear connection beep but pressing power button plays disconnect button) to no avail. What can I do to unbrick?
Stock 4.1.2? Possible over a hardbricked T989 with old 2.3.6?
Click to expand...
Click to collapse
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.

sam.balia1012 said:
sorry but i have to assume that you are not doing the 3 button recovery or download mode right.
Pull battery, put battery back in, hold power button & Vol +/- untill you see SAMSUNG on the screen ---> let go off power button(keep holding
Vol +/- button) .....u will see recovery. (assuming you did flash cwm before).
Let me know.
hit thanks.
Click to expand...
Click to collapse
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!

dont give up
JahJahLoO said:
I believe I am doing it correct, I have been entering recovery and download mode many times, right before I soft bricked it.
And sorry, no, I've tried many times, many methods and my phone is confirmed as entirely hard bricked.
SUPAR SAD, but thank you!
Click to expand...
Click to collapse
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know

sam.balia1012 said:
you can try using adb and put the phone in dl mode.
sometimes its as easy as pull battery and wait awhile (20 min or more) and try again.
if you've exhausted all possibilities, you can use a jig to force a dl mode.
let me know
Click to expand...
Click to collapse
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.

JahJahLoO said:
I don't know what adb is, or how to use it; I have, however seen my friend RDP to my desktop and do something and used the term 'adb' in his attempt to code through the phone.
I've done that battery waiting period, for nearly an hour and still no result.
After doing some researching, I have found that many people have stated a USB JIG would not be applicable to a 'hard bricked' phone. I really wanted to try as it looked like the most, simple and inexpensive solution.
Click to expand...
Click to collapse
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.

sam.balia1012 said:
If you know for a fact that you bricked your s2, maybe wrong rom or kernel that u flashed by accident then.....
contact these guys.... http://brickedmyphone.com/contact-me/
good like and click thanks if you agree.
Click to expand...
Click to collapse
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.

JahJahLoO said:
Lols, you're really fishing for them "Thanks"; you got it buddy. Very swift responses. :cyclops:
Anyway, I'm still searching the net for anymore possible solutions.
Thanks.
Click to expand...
Click to collapse
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!

sam.balia1012 said:
fishing for them ???????
what the hell does that even mean? it seems that brick did hit u in the head!!!
Click to expand...
Click to collapse
It might as well have... :crying:

[Q] Bricked Samsung Galaxy s4. Help!

So I just wanted to flash omega rom onto my T-Mobile i9505 galaxy s4. It worked, but the wifi didn't work, and it said that I needed to flash a file through odin. I flashed the file, but an error occurred in odin. Then, I unplugged my phone, and booted it into twrp recovery. All of a sudden, it asked me for a password, which I did not set. So I hit cancel, then did a wipe of the cache and user data. I then tried to go and flash an old rom, but all of my microsd card files were not there! The folders were showing up, but not the files. Then I tried to boot my phone and it wouldn't boot at all. After trying to install a stock firmware through odin, the phone turns on for 2 seconds, then shuts off. I can't get into recovery anymore either.

First, do you mean you have a T-Mobile M919 S4 and you tried to flash an i9505 ROM?
You are able to, but I want to just clear things up.
Let me write a little something, then we'll see if we can get you back to where you want to be.
- Sometimes when things don't go 100%, you gotta take a deep breath, step away and then go over the steps you took to get to the point of where the issue started. When in doubt on what to do next, youccan read around the threads on xda and other resources. After doing a little research and you still have doubt, just ask questions by posting the issue likeyyou're doing now.
The natural reaction is to fix the issue, and to do this and that without being sure. The combination of the latter with a little panic and perhaps not enough patience, can make matters worse. I'm not saying all of the above pertains to your situation, but some of the comments may, as they have to me during certain situations. Anyway, something to keep keep in mind for the future
Now to the issues at hand.
Can you get into download/ODIN mode?
Power down the phone and pull the battery.
Wait 10s and insert the battery but Don't power on the phone.
Hold power button & volume down button at the same time until the screen turns on.
When you've read the above, let me know if you're able to get your S4 into Download/ODIN mode.

Fixed
The problem was that the phone was just completely out of battery, and I was trying to flash the stock firmware onto it but it could not boot into it because there was no battery. Charged it, and could access recovery and the phone booted! Yeah I guess I wasn't patient and made a simple mistake. OP, Please close thread thanks!

bob10123 said:
The problem was that the phone was just completely out of battery, and I was trying to flash the stock firmware onto it but it could not boot into it because there was no battery. Charged it, and could access recovery and the phone booted! Yeah I guess I wasn't patient and made a simple mistake. OP, Please close thread thanks!
Click to expand...
Click to collapse
Ah, :good: to hear.
I sometimes forget to add that step and another into my tutorial/how to posts:
- Prior to ROM installation, please make sure you have at least 50% battery charge available.
- Please check your usb cable to be in good working order.
The above are 2 reminders are a of couple of the most overlooked steps prior to flashing ROMs and other associated goodies

Samsung G SIII

Hi my name is Javi, im HTC ONE owner, but i do have and SIII from us cellular, that i bought, to get into this, i have this SCH-R530, i root it all good, when i flashed with the liquid rom and gave me an error and kept booting into the recovery, i rom a different rom from other SIII model and when asked for restard never came back, screen totally off, when i plugged into my pc and make a sound, but the phone do not do anything, none tool recognized, i bought that tool name JIG but dont do anything still, what do you thing will be my problem, oh, i make mistake i didnt make a back up when i was rooting, (forgot that step) i tried anything ive been reading on internet and nothing works, changed battery and still nothing, i think, hope get some answers, HELP

JMR8 said:
Hi my name is Javi, im HTC ONE owner, but i do have and SIII from us cellular, that i bought, to get into this, i have this SCH-R530, i root it all good, when i flashed with the liquid rom and gave me an error and kept booting into the recovery, i rom a different rom from other SIII model and when asked for restard never came back, screen totally off, when i plugged into my pc and make a sound, but the phone do not do anything, none tool recognized, i bought that tool name JIG but dont do anything still, what do you thing will be my problem, oh, i make mistake i didnt make a back up when i was rooting, (forgot that step) i tried anything ive been reading on internet and nothing works, changed battery and still nothing, i think, hope get some answers, HELP
Click to expand...
Click to collapse
Was it error 7, if so its because you need to remove the asserts from the ROM. Also if you flashed a ROM from another model that is not compatible with your phone, you probably soft bricked or fully bricked it. If it goes into download mode, its not fully bricked. Try download mode by holding volume down, home, and power button together. Also philz advanced cwm recovery is the only one not giving me any problems these days.
sent from my Gs3

joeyhdownsouth said:
Was it error 7, if so its because you need to remove the asserts from the ROM. Also if you flashed a ROM from another model that is not compatible with your phone, you probably soft bricked or fully bricked it. If it goes into download mode, its not fully bricked. Try download mode by holding volume down, home, and power button together. Also philz advanced cwm recovery is the only one not giving me any problems these days.
sent from my Gs3
Click to expand...
Click to collapse
I wish my phone would even go to download mode, I think is fully brick

Nasty Bootloop after Flash on Sprint G2

Last night I installed geefree on my phone from the app store and used it to install TWRP. I downloaded a nightly CM11 and an appropriate gapps. Using geefree I rebooted to recovery (never figured out the button combination to boot to recovery "naturally") and installed both of the zips. This could be where I made my mistake, I installed both at the same time.
Now my phone loops, displaying the LG logo for a few seconds, then shutting off and rebooting before repeating the process. I can't seem to get it to go into download mode or the recovery menu. I've tried power+up, power+down, down+up and each of those while plugging the device in, etc. I can get the device to a hardware key control mode, though it doesn't seem too useful.
How can I save my phone? This forum has been a great resource in the past and I'm very grateful for the many tutorials I've followed rooting other devices. Hopefully you guys can save the day once again!

Volume up plus power is how to access recovery on sprint.
What stock sw version were you on before you flashed cm?
Did you wipe data before flashing?
Sent from my LG-LS970 using xda app-developers app

I was using stock 4.2.2, I believe. I didn't wipe the data (shame on me), a bad habit that I picked up from my first rooted device, the Samsung Moment. It didn't ever matter on that one, afaik. Thanks for the reply!
Edit: Volume up and power whether plugged in or not takes me to the hardware key control mode screen.
Second Edit: http://forum.xda-developers.com/showthread.php?t=2432476&page=35 I also found this thread where someone seems to be experiencing similar issues and they fix it with "LG Utility." Is that a PC application? It's a little vague to google, but I've been trying!

I have a bootloop issue every time i flash a rom i have to wipe all but sd flash roms and gapps the i do a restore from twrp and oly restore my boot image only and they boot no prob

I'm kind of starting to suspect my power button doesn't work at all for whatever reason. I have a lot of difficulty getting the phone to shut down, then it doesn't seem to easily power up. It's a strange collection of problems. Would a Sprint repair place be able to fix this?

If they have parts on hand if not either a swap out or a sendoff

Same problem here - bootloop and no download mode - CWM works! - urgently need help
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?

Device is recognized but can´t be mounted - bricked forever?
Parinibbana said:
I guess I have the same problem as InlineFourPower (apart from that my power-button has no problem).
I am stuck in bootloop since I tried to upgrade to Kitkat a few days ago. Now I can´t get into download mode any more, nor into fastboot or anything else. Only CWM works.
From within CWM I can successfully flash ROMs but that doesn´t help, since afterwards I am still stuck in bootloop. It is possible, however, to push files via adb-commands while I am in CWM.
Does anybody have an idea how to go from here or how to get download-mode back?
Click to expand...
Click to collapse
I tried a few things on Linux.
After terminal-command "ls /dev/sd*" when the device is unplugged from the computer I get "/dev/sda".
When the device is connected via USB, I get: "/dev/sda /dev/sdb"
So sdb is my LG G2.
So I went on to the next command: "gdisk -l /dev/sdb"
As a result I get: "Problem opening /dev/sdb for reading! Error is 123."
Does it mean that the phone isn´t mounted or what? Now I´ve connected my phone to another Linux machine with the same result. It is recognised (p.e. as sdd), but there is no sdd1. Seems as if it is recognized, but can´t be mounted. Does that mean my device is bricked for good? That´s it?

to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb into the phone first then hold VOL+ and plug into usb port on the computer.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, it will shut off eventually!!
plug the phone in while in download mode to install drivers and set com ports, then unplug before you begin your flash with LGFlashTool, hope this helps you out.

Cronic2009 said:
to get the phone into download mode you have to plug the usb cord in and hold VOL+, so to get this right as I have a case on mine, plug the usb in first then hold VOL+ and plug into usb port.
it does take a loooong time to power down the phone with the button when stuck in a boot loop, just keep holding it until it shuts off, hope this helps
Click to expand...
Click to collapse
Thanks Cronic2009 for your advice.
There are, however, szenarios where download-mode is not accessible any more. Neither by using the hardware-keys, nor by using the adb-command.
After four days of resarch and a lot of trial and error, I finally unbricked my F320L using the two adb-commands outlined at the beginning of that thread: http://forum.xda-developers.com/showthread.php?t=2451696
Worked like a charm.
Thanks everyone for your advice.

no problem buddy, glad you got it figured out, good luck to you from here on out!
FYI, that link doesn't work
I just wanted to ask anyone who might know, since the bootloader of the LS980 is locked, we cannot "break" this correct, so no matter what commands we decide to run through root, we cant touch the true bootloader there for LS980 fail safe? (Besides Acts of God, EMP, ect)

Cronic2009 said:
no problem buddy, glad you got it figured out, good luck to you from here on out!
Click to expand...
Click to collapse
Thanks for letting me know. I corrected the link in my previous post.

Be sure if you use a aosp based rom to flash the ZV8 modem. Your can use dr87 or furnance kernals after you flash the zva modem althought i have encountered soft brick due to this.

so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410

pitbullmommy45245 said:
so i'm having this exact issue and i don't know how to get out of it. i just need to transfer the radio to my phone somehow but nothing shows up under adb devices. i'm trying to the lg mobile support tool now. its downloading the software. but if it doesn't work does any one have any fixes?
edit: i fixed it by following this http://forum.xda-developers.com/showthread.php?p=51637410&highlight=download+fail#post51637410
Click to expand...
Click to collapse
Thank You for sharing you fixed your issue pittbullmommy but the link you posted points back to a post about a failed run on LGFlashTool, will you please fix the link and point it to the post/guide you used to fix your phone, it may help others stuck in a similar situation, glad to hear you got it fixed and working, best of luck with it from here on out!

Hi all
was just about to start a new thread but didn't want to get into trouble..anyway I am in need of some assistance please.my ls980 has been bricked for some time now been searching all over the internet for a solution to be stuck back at square one.found this video on youtube which is pretty much exactly what my phone is doing.I have used lg flash tool to revert to stock and still nothing I lost root doing that but last night,I managed to regain root access I have no idea how but it happened when i clicked ioroot batch file i went into download mode and it stated bottom left ROOTED in red so i managed that but that is it still doing what is being shown in the video its on youtube
watch?v=PjLF-pBhZSY
please if anyone has the know how I would like to fix this phone rather then bin it thank you all happy 4th everyone

After using tot and flash tool to get back to stock, did you try going into stock recovery and do a factory data reset? I know it sounds stupid especially after a tot but try it. Couldn't hurt
Sent from my LG-LS980 using Tapatalk

Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!

Yes sir I've tried that and more to no avail is there anything I can do through adb I'm on stock recovery phone doesn't stay on long enough to install anything

sarfdawg said:
Borderline noob here, so please bear with me...
I have been using TWRP 2.7.0.0 to do all my work, and I was able to get the Lego ROM installed with ZVA. I got into too big of a hurry and forgot to make a backup of stock. I've also been unsuccessful in trying to install ZVC modem and firmware. Thankfully ZVA works as does the LEGO ROM, but I'd like to have stock there to access as well. The stockZVC that's on the Android Development page has been getting stuck (bootloop?) on the Sprint Spark logo. I've done TWRP's factory reset with no success. Any help would be great.
Thanks in advance!
Click to expand...
Click to collapse
You ever get her fixed?

[Q] Trying to revert back to stock, ended up soft bricking my phone

I searched but seems like everyone else has a slightly different situation than I do and I don't want to screw my phone up any more.
I picked up a Galaxy S5 and wanted to give my Galaxy S3 to my mom.
(This next process happened almost a month ago, so I forgot many of the useful details, I'm really sorry about that)
I don't remember which ROM I was running, I'm fairly certain it was CM10 that hasn't been updated in almost a year. I ended up rebooting and flashing a stock rom that I had backed up on my computer. I flashed it and I got a weird message. The phone wouldn't boot to the ROM and kept going to the home screen. I tried a different stock ROM that I got online, got the same issue, so I tried another source's stock ROM. I got a weird error, phone shut down, and wouldn't power back up.
It would vibrate once when I held the power button, but it didn't do ANYTHING else. I tried doing the power+volume down trick, vibrated twice, did nothing more than that. I got fed up, took the battery out and the memory card, and let it sit in a drawer.
At this moment the only thing the phone does is a short vibration when I do either the power button or power button + volume down.
Today I decided to try to recover it and saw something about a USB Jig I can buy on eBay that may help.
Is this something that may work or is my phone permanently bricked? If the Jig does work, where should I get the stock ROM for this phone, and if it matters, how do I know which stock ROM to install?
It's an AT&T Galaxy S3 16gb model.

here is a thread for stock ROMs.
do you know your bootloader and baseband version?
http://forum.xda-developers.com/showthread.php?t=2939781
"all i can really do , is stay out of my own way and let the will of heaven be done"

mrrocketdog said:
here is a thread for stock ROMs.
do you know your bootloader and baseband version?
http://forum.xda-developers.com/showthread.php?t=2939781
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
I don't know any of that.
Also what's the difference between MJ2, LK3, LG1, and LEM?

Sounds like you flashed an incorrect ROM and/or bootloader onto your phone.
The bootloader is important because if you have the mjb and newer bootloader, flashing an older bootloader will brick the phone.

audit13 said:
Sounds like you flashed an incorrect ROM and/or bootloader onto your phone.
The bootloader is important because if you have the mjb and newer bootloader, flashing an older bootloader will brick the phone.
Click to expand...
Click to collapse
I can see me flashing the wrong rom, but is the bootloader attached to the rom package?
If the bootloader is ****ed, will the jig work for me or am I out of luck?

Where did you get the last ROM you flashed? Provide a link if you can.
Have a look at the debrick thread as it may be helpful if your phone can't get into download mode. The jig may or may not help but it's good to have one for Samsung phones.

audit13 said:
Where did you get the last ROM you flashed? Provide a link if you can.
Have a look at the debrick thread as it may be helpful if your phone can't get into download mode. The jig may or may not help but it's good to have one for Samsung phones.
Click to expand...
Click to collapse
I honestly have no clue, the only rom I could find in my downloads folder on my computer that I can't identify as a custom rom is "pac_d2lte", and I remember the d2lte part throwing me off even though thats what a few sites said to download.
The Jig worked, btw, I'm at the download screen with the phone plugged into my pc, should my PC be showing it as an external device? Cause it doesn't show it in "My Computer".

Can I just take an SGH-I747 rom off this page and flash it with ODIN?
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269

I would not flash any stock rom until you know the bootloader version on your phone.
Since you can get into download mode, flash philz touch recovery for the d2lte and flash a custom rom such as cm11 onto your phone to at least get it booted so you can confirm the bootloader and baseband.

netchemica said:
Can I just take an SGH-I747 rom off this page and flash it with ODIN?
http://forum.xda-developers.com/showthread.php?p=33570269#post33570269
Click to expand...
Click to collapse
I actually just did just that. It seemed to restore my phone to working condition. It seemed a little buggy during set up, but I don't know if it's because I was running it without a sim card or not. So far it looks like it's running just fine.
In other words, this is what I did (in case someone has the same problem and stumbles across this thread):
Purchased a Samsung Galaxy Jig from Amazon
Downloaded one of the LK3 ROMs from this thread
Downloaded Odin 307
Connected the Jig to my phone to allow it to boot to download mode
Once in download mode I unplugged the Jig and plugged the phone into my PC
I launched Odin and it found my phone right off the bat.
With the settings "Auto Reboot", "F. Reset Time", and "PDA" checked, I clicked on PDA and selected the ROM I just downloaded.
I clicked start, Odin did its magic, and my phone rebooted to the setup screen

audit13 said:
I would not flash any stock rom until you know the bootloader version on your phone.
Since you can get into download mode, flash philz touch recovery for the d2lte and flash a custom rom such as cm11 onto your phone to at least get it booted so you can confirm the bootloader and baseband.
Click to expand...
Click to collapse
I didn't see your post before I flashed. I took a gamble and it seems to have worked.