Hi,
I have the same problem with custom com. I try to install I9195XXUBML4_I9195XEOBNA1_XEO. What wrong is with my phone and how a can fix it ?
ODIN MODE
PRODUCT NAME; GT-I9195
CURRENT BINARY; Custom
SYSTEM MODE; Custom
KNOX KERNEL LOCK; 0x0
KNOX WARRANTY VOID ; 0x1
CSB-CONFIG-LSB 0X30
BOOTLOADER AP SWREV ; 2
WRITE PROCETION; Enable
Odin Massage
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUBML4_I9195XEOBNA1_I9195XXUBML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
SW REV CHECK FAIL: Fused 2 >Binary 1
Recntly I had [ROM][UNOFFICIAL][4.4.4] CarbonRom KitKat Weekly's [S4 Mini 3G/LTE/3GDS] [app2sd]
When i do restore backup , all google app are stopped. helps restore factory settings but stops working sim card
I think that message comes from "downgrading " bootloader
Happens when going from official kk to any official jb.
Just flash the correct ROM with correct bootloader
BizBass said:
Hi,
I have the same problem with custom com. I try to install I9195XXUBML4_I9195XEOBNA1_XEO. What wrong is with my phone and how a can fix it ?
ODIN MODE
PRODUCT NAME; GT-I9195
CURRENT BINARY; Custom
SYSTEM MODE; Custom
KNOX KERNEL LOCK; 0x0
KNOX WARRANTY VOID ; 0x1
CSB-CONFIG-LSB 0X30
BOOTLOADER AP SWREV ; 2
WRITE PROCETION; Enable
Odin Massage
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUBML4_I9195XEOBNA1_I9195XXUBML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
SW REV CHECK FAIL: Fused 2 >Binary 1
Recntly I had [ROM][UNOFFICIAL][4.4.4] CarbonRom KitKat Weekly's [S4 Mini 3G/LTE/3GDS] [app2sd]
When i do restore backup , all google app are stopped. helps restore factory settings but stops working sim card
Click to expand...
Click to collapse
SW REV CHECK FAIL: Fused 2 >Binary 1
that warning is telling you the pone is burned to fuse2 and the bootloader your installing is a binary 1 so you cannot downgrade because of the fuse
Related
Hi All
I am trying to flash stock ROM T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5 downloaded from samsung.updates.com When I put my phone in DN mode this is what shows at the top of the screen:
Product Name: SGH-T889
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
KNOX WARRANTY VOID: 1
This is what I get from odin 3.09:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
TIA
Hey XDA,
I need to send my phone back for repair because of a physical fault.
I have tried using odin to flash the stock firmware but odin keeps failing with this message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9515XXU1AND3_I9515H3G1AND1_I9515XXU1AND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
When my device is in download mode:
Current Binary: Custom
System Status: Official
Write protection: Enable
Secure check fail : aboot
Any ideas on whats wrong?
also my phone doesn't boot =/
Nevermind, found the thread http://forum.xda-developers.com/showthread.php?t=2751224
fixed my problems
Odin Log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Plz help me unroot...BTW I also have lollipop custom rom installed...Im trying to install stock rom and odin keeps failing...
on phone it says start [224,1440]
sv rev check fail : fused 5, binary:1
Once you bite the lollipop you can't go back.
You can't downgrade from 5.0.1 to4.3, you can only go to 4.4.4.
You need stock 4.4.4 NH7 or NK2 with a current recovery.
Pp.
Bone stock M919 (as far as I know - got the phone used at NK2 IIRC), OTA updated to OH3. Was having some issues, decided to Odin (3.10.7) same firmware (M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5 from sammobile.com) over.
Odin log:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Device screen:
ODIN MODE
PRODUCT NAME: SGH-M919
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE-PROTECTION: Enable
eMMC BURST MODE enabled
START [224, 1440]
BAR [240, 1440]
Click to expand...
Click to collapse
After rebooting, device goes into odin mode with "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried both Kies v2 and v3 and neither is able to detect it in the emergency recovery mode
Also tried 3 different USB cables and all the ports on my laptop, with no results.
UPDATE: Fixed! What do you know, using my 8-year old reserve laptop resolved the problem.
What operating system are you using ? if win9 or 10 then try it in win 7. win 10 got me problem few days ago. but in win7 installed successfully .
hi guys
i flashed stock firmware but odin failed midway... tab s shows the yellow triangle and "encountering an issue". i couldnt recover with kies. it also fails.
there's odin's log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1BOCC_T805VFG1BOC4_T805XXU1BOC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i can access download mode. i can't download another rom cuz it took a week to download this one!! anyone can help me?
This is common when you flash a firmware not for your region. Easy fix, just boot to recovery and wipe cache then reboot. Everything should be fine after that.