Hi All
I am trying to flash stock ROM T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5 downloaded from samsung.updates.com When I put my phone in DN mode this is what shows at the top of the screen:
Product Name: SGH-T889
Custom Binary Download: Yes (1 counts)
Current Binary: Custom
System Status: Custom
KNOX WARRANTY VOID: 1
This is what I get from odin 3.09:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
TIA
Related
UPDATE: I was able to flash JB Update using odin 3 v185.[/B So problem is fixed.
I was trying to update my T999 via Kies to stock JB BUT update failed during the process. I believe I am in download mode
I see on the top
ODIN MODE (in red color)
PRODUCT NAME: T999
Custom Binary Download: Yes ( 1 Counts )
Current Binary: Custom
System Status:Custom
How do I restore this phone back to normal? I was trying to install stock jb via kie.
Thank you!
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
mt3g said:
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
Thank you, I just tried but no go; Odin failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJA_T999TMBDLJA_T999UVDLJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Hey all,
I've a little Problem with my Note 2.
I got various Crashs in the last days so i decided to flash another Rom. Same Random Crashes.
So I said, okay, lets try Stock.
I used this guide: http://forum.xda-developers.com/showpost.php?p=31801046&postcount=1
and this Rom from that guide: N7100XXDMC3 N7100DBTDMB1 (till now i tried 5 or so ).
If i flash it via Odin, everything seems okay, but at reboot it goes straight into TWRP again. It seems it doesn't flash anything (even if it is working for Minutes...)
TWRP says cant mount '/data' so i cant flash anything from there so for now, i have a 500$ chopping Board
And because of DownloadMode showing Custom i cant send it to Samsung.
I'm sad
Any idea for i reason why odin can't flash anything?
My last to tries:
DBTDME2 from Sammobile.com
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, still shows TWRP Logo on normal boot and on recovery boot twrp but cant mount data oder ext sd
So i tried to flash another Recovery , philz_touch_5.08.5.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.08.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, TWRP all over.
pilzkopf92 said:
Any idea for i reason why odin can't flash anything?
My last to tries:
DBTDME2 from Sammobile.com
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, still shows TWRP Logo on normal boot and on recovery boot twrp but cant mount data oder ext sd
So i tried to flash another Recovery , philz_touch_5.08.5.
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.08.5-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
No change, TWRP all over.
Click to expand...
Click to collapse
Being unable to mount Data partition in most case means that it is corrupted. Have you tried Full Wipe from Recovery to format Data and Cache partitions? The next thing is to flash PIT file in Odin to completely reformat filesystem(s) - here is the file http://d-h.st/Dlv from this thread.
It's like takin a hammer to kill a fly but it should work (be mindefull it's for N7100 and not N7105).
mat9v said:
[...]to flash PIT file in Odin to completely reformat filesystem(s) [..] but it should work
Click to expand...
Click to collapse
Thanks but Sadly... it doesnt
Here is what odin Tells me:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any Ideas? Searched at XDA and Google but nothin related
That looks like you have the SDS bug... Not all the emmc is corrupt in your case, since you have access to download mode... On which android version did you experience your first crashes? 4.1.1 or 4.1.2?
pilzkopf92 said:
Thanks but Sadly... it doesnt
Here is what odin Tells me:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100DBTDME2_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any Ideas? Searched at XDA and Google but nothin related
Click to expand...
Click to collapse
Flash .pit file with the firmware, not alone make sure re-partition is ticked. Also, it may be a strange question, but are U using Download Mode or Odin Download Mode? Try on another computer with fresh drivers installation and no Kies or other Samsung stuff running.
Hey guys, my GT-N7100 won't boot anymore. I tried to flash a rom with Odin on Windows coming from Cyanogenmod 4.4.
Now it won't boot and the only screens I can get are the Kies recovery, and Download mode. Every time I try to flash with Odin it fails when it is busy with [system.img]. I have tried multiple versions of Odin and multiple software versions. This is the latest I tried:
http://androidcentral.us/2014/04/ho...-2-gt-n7100-to-official-android-4-4-2-kitkat/
this is what Odin does:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFND3_N7100OXAFND3_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me!
Maybe it has something to do with downgrading from 4.4?
Hey XDA,
I need to send my phone back for repair because of a physical fault.
I have tried using odin to flash the stock firmware but odin keeps failing with this message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9515XXU1AND3_I9515H3G1AND1_I9515XXU1AND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
When my device is in download mode:
Current Binary: Custom
System Status: Official
Write protection: Enable
Secure check fail : aboot
Any ideas on whats wrong?
also my phone doesn't boot =/
Nevermind, found the thread http://forum.xda-developers.com/showthread.php?t=2751224
fixed my problems
Odin Log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Plz help me unroot...BTW I also have lollipop custom rom installed...Im trying to install stock rom and odin keeps failing...
on phone it says start [224,1440]
sv rev check fail : fused 5, binary:1
Once you bite the lollipop you can't go back.
You can't downgrade from 5.0.1 to4.3, you can only go to 4.4.4.
You need stock 4.4.4 NH7 or NK2 with a current recovery.
Pp.