I have the 360 working fine and paired with my Nexus 5 and the Android Wear App. I am now trying to get the moto connect application working, I get to the I'm in screen and click the I'm in button. I then get an "Unknown Error has Occurred please try again", I have uninstalled and re-installed the app and still have the same issue. Anyone else seen this error and have a solution for how to get past it?
Never mind it resolved itself, tried again this morning and it worked, strange as I havent changed anything on the phone.
Related
So I updated the firmware as stated in this post: http://forum.xda-developers.com/showpost.php?p=30360711&postcount=38
After I rebooted the phone I tried it out. Tried to click off two pictures quickly. I don't remember trying it this fast before, but on the second picture the camera app froze, and about 20 seconds later it closed and I got a 'camera has stopped responding' message. I reoppened the app and tried it again and it was fine, and has been fine since.
Anyone else have this happen? Doing a google search of zdff03 turns up a thread of people having f/c problems with it.
I've updated to the new Connect app, and the app on the phone works fine, but none of the new features will sync to the watch. I've tried restarting the watch, resetting the watch, uninstalling and reinstalling both Android Wear and the update to the Connect app (on a Moto X, so I can't fully uninstall Connect).
Anybody seeing this? Maybe I need to do all that in a particular order?
I am having the exact same issue. Using a Moto X 2014. The app updated and works on thr phone but none of the new features will sync
In the same boat as well...
Same with me. Running lg g3. I've read the issue is the phone that your 360 is connected with. Some people paired their 360 with a different phone and then the new watch faces finally appeared. But once they would try to pair their 360 back to their current phone, the watch faces would still not show.
No problem here on my Nexus 5
you won't see anything different on the phone after the motorola connect update in terms of the Body app. However, if you go into the start menu on the watch itself, you should see moto body features such as calories, steps, heart activity, and heart rate. hope this is helpful.
Won't work on my S4 either, tried everything. Bummer!!!
Works fine with my s4. Try restarting phone?
ditto
Same issue on my moto x 2013. Can't do anything to get them to show up. Done everything short of a hard reset on the phone
same here, nexus 5 on lollipop
I had the same problem. I use it with my Nexus 5 running an AOSP Lollipop Build.
Solved it by uninstalling the Motorola Connect App and reinstalling. After that everything new appeared on the 360.
Hope this helps :good:
mc-paulo said:
I had the same problem. I use it with my Nexus 5 running an AOSP Lollipop Build.
Solved it by uninstalling the Motorola Connect App and reinstalling. After that everything new appeared on the 360.
Hope this helps :good:
Click to expand...
Click to collapse
Many thanks this worked for me. I was dreading having to do a factory reset.
Edbogue
Out of nowhere today, my watch started to constantly show "Unfortunately, Android Wear has stopped." I can not get into the menus, and changing the face on my phone does nothing. I've tried turning it on and off but it hasn't helped. It still connects to my phone. Is there a way to reset it?
This briefly happened to me as well, it appeared to be a weak Bluetooth connectivity issue. Once I got closer to my phone things improved. However once I got control back I did remove the extra watch faces I have installed.
Sent from my XT1094 using Tapatalk
I had the same issue after I update the 360 to 5.1.1 and could never get it working. Had to call Moto for a replacement. Just got it yesterday and it has 5.0.1 and I'm not sure if I should take the OTA update that keep popping up.
Hi, I just received my brand new SW3 and I'm having trouble setting it up.
I link it to my phone (Galaxy S6) and then it brings up the "Downloading" screen on the watch. About 1/10th of the way through it comes up on the screen that "Android Wear has stopped", followed by "Google Play services has stopped".
I've tried resetting the process many times and it happens over and over.
Any advice?
Edit: Downgraded to an earlier version of the Android Wear app, apparently the latest ones don't keep in constant contact with the watch, hence the crash. Went to the version from the 25th February and so far so good, it's got to 50%.
Have you got the latest firmware on the watch? I have a sw3 and s6 combination - it has been difficult with the latest updates, but a new version of play services a few days ago seems to have helped
Outcasst said:
Hi, I just received my brand new SW3 and I'm having trouble setting it up.
I link it to my phone (Galaxy S6) and then it brings up the "Downloading" screen on the watch. About 1/10th of the way through it comes up on the screen that "Android Wear has stopped", followed by "Google Play services has stopped".
I've tried resetting the process many times and it happens over and over.
Any advice?
Edit: Downgraded to an earlier version of the Android Wear app, apparently the latest ones don't keep in constant contact with the watch, hence the crash. Went to the version from the 25th February and so far so good, it's got to 50%.
Click to expand...
Click to collapse
For anyone interested, the exact wear companion version that can get you past this error is 1.0.5.1724356. It will update device from 4.4.* to 5.0.2. You may get a warning that "something went wrong" while downloading which can be ignored.
I'm having this exact problem. After using the earlier Wear app, should I update it after?
My wife had this same issue with her watch when she was trying to set it up. She has a S5. It kept getting stuck at the same point when downloading. I thought the watch was defective but it was an issue with the phone. I used my phone to setup the watch instead and had no problem. After it finished I connected it back to her phone and she hasn't had any problems since.
Sent from my LG-D850 using XDA Premium 4 mobile app
I was running my galaxy watch on my pixel 3xl, Android R dp1 with just some lag. Today my phone updated to dp2. It seemed as if the lag on the watch went away. Anyways, I did a factory reset on my phone and now my watch won't finish pairing. It goes thru the process where it says that it paired and to approve the permissions. But then I get a lovely pop-up that says "companion device manager keeps stopping". The watch just says to check phone to complete setup, meanwhile the wear app just goes in a loop of pairing, asking for permissions, going to the settings, then companion app stopping. Does anyone have any ideas? I've tried resetting the watch and I can't find anything on Google or xda. Thank you in advance.