Related
Hello all,
For those who have the official 3-pin car dock, have you experienced this problem:
After removing the phone from the car dock, if you get an incoming call you are unable to hear the person calling you. You have to hang up and call them back in order to hear them properly.
I have experienced this on ICS and now Jellybean, it is extremely irritating. I had someone call for a job interview and I could not hear them, but they could hear me.
If anyone has a fix/workaround, that would be great.
UPDATE: I suspect the issue is with having it connected to the car via Bluetooth with music playing via auxiliary via the pogo pins , after that you are unable to hear the first call through the handset after leaving the car.
Have you checked your in call volume? Since the phone fits so tightly in the dock, sometimes when I remove the phone it presses the volume rocker down and lowers all of my volumes. You might want to check to see if that's happening to you.
Thanks, I'll try check that today. I would feel ridiculous if that were the problem, but I'm fairly certain its not since hanging up and calling right back fixes it.
It's interesting that you don't have this problem, are you also connected to the car via Bluetooth? Also what ROM are you running.
Sent from my Galaxy Nexus using xda app-developers app
Is there another source for these?
The Play Store has had these "coming soon" since the dawn of time
GldRush98 said:
Is there another source for these?
The Play Store has had these "coming soon" since the dawn of time
Click to expand...
Click to collapse
I got some from expansys usa
Sent from my Galaxy Nexus using xda app-developers app
kcm117, Just to clarify, when you write this:
kcm117 said:
...UPDATE: I suspect the issue is with having it connected to the car via Bluetooth with music playing via auxiliary via the pogo pins , after that you are unable to hear the first call through the handset after leaving the car.
Click to expand...
Click to collapse
Do you mean that the Official Car Dock uses Bluetooth to transfer audio? I remember that there was a teardown of the desk dock in this sub-forum (I'm having trouble finding it in, for some odd reason...) that came to the conclusion that there was no Bluetooth and the audio was transfered using the pogo pins, like it is on (as far as I know) all the other pogo pin-equipped devices. (HTC Nexus One, MyTouch 4G, Rhyme, One X, etc.). For some reason the Android blogs and these forums spread the idea that Bluetooth is used, but it appears otherwise.
In other words, would you please clarify how you are connecting an external audio device to the phone.
Thanks,
XBIRDIE98
XBIRDIE98 said:
kcm117, Just to clarify, when you write this:
Do you mean that the Official Car Dock uses Bluetooth to transfer audio? I remember that there was a teardown of the desk dock in this sub-forum (I'm having trouble finding it in, for some odd reason...) that came to the conclusion that there was no Bluetooth and the audio was transfered using the pogo pins, like it is on (as far as I know) all the other pogo pin-equipped devices. (HTC Nexus One, MyTouch 4G, Rhyme, One X, etc.). For some reason the Android blogs and these forums spread the idea that Bluetooth is used, but it appears otherwise.
In other words, would you please clarify how you are connecting an external audio device to the phone.
Thanks,
XBIRDIE98
Click to expand...
Click to collapse
Hi,
Here is the set up in my car:
Phone dock is connected to the audio auxiliary port on the car stereo for music. (The pogo pins on the phone send audio from the phone to the aux port on the base of the dock). The Phone is also simultaneously connected to the car hands-free system via Bluetooth. In my car, music goes the the auxiliary but calls come in over the bluetooth. (My car does not have the package to support Bluetooth audio streaming, only voice.)
I hope that makes it clear?
Hello guys!
I've just bought a Nexus 7 to integrate in my car dashboard. Actually I didnt had so much knowledge about it before I bought it, (I only wanted the best and I hate apple so) but I didnt thought it was junk. And that's the only thing I wanted, a non junk tablet that could play music and works as a navigator without hardware-buttons.
My old stupid Iphone 4s worked perfectly for playing and streaming sound from spotify trough a regular usb cable to my headunit, so I didnt even reflect that googles new flagship wouldnt be able to do this simple task. But it seems like it doesnt work..
I've searched for answeres but the only thing I can find is to buy a usb DAC that converts the digital audio to analog audio but then I lose the whole damn point. I want digital audio in to my headunit. And my stupid old Iphone do it great, why the **** can't google flagship do it? Feels like I have bought a extra thin rock from the stone-age.
Please tell me I'm wrong and this is possible somehow. Otherwise I gotta throw this stupid f***** sh*t tablet in the garbage as fast as ******* possibly..
Sorry for my rage.. I just feel so fooled.. I've just bought a 400$ angry birds game. :silly:
You have a couple of options:
1. Use headphone output jack from your Nexus. Hopefully your car audio headunit has an auxiliary input.
2. Bluetooth! This is what I use in my car. If your car audio headunit has bluetooth built-in, then you don't need any cables at all. Just pair your car audio to your Nexus and start playing music! If your car stereo does not have bluetooth, then you need to purchase a bluetooth car kit. These connect to an auxiliary input on your car stereo (just like #1 above). There are bluetooth kits that also stream through an FM modulator, but that should be used as a last resort as sound quality suffers materially.
I installed an Alpine bluetooth car kit and integrated it with my factory car stereo system in a 2005 Honda Accord. Since I did not get the factory CD Changer option, I had that one input open to use with the Alpine Bluetooth. I'd post a link to my YouTube video showing this, but I'm now allowed to post links yet since I'm new to this forum.
The two options listed above are the only ones I'm aware of. I'd love to hear from others if there are other options. The only drawback to both options is that you use the DAC built in the Nexus, you don't get to pass through to a better quality external DAC. The only way around that is a Slimport adapter which uses HDMI. I don't know of any car audio units that have HDMI inputs.
What you want is achievable. Nexus 7 2012 works best with Timur Kernel however Nexus 7 2013 with an AOSP build or stock with Elemental X kernel can have a USB DAC with an OTG Y cable that will simultaneously charge.
If you have Cyanogenmod you may need glitch kernel which does the same thing.
I have a HiFiMeDIY DAC and OTG Y cable (at home) but no reason I couldn't run the same thing in my car with a car charger.
John
I use a fiio e7 on USB and it works perfectly on cm or carbon, no extra apps or kernel required. By the way, otg works fine with Franco kernel on either Rom and hotswapping is supported. I have not yet found another rom that supports it, but I have been using just carbon for quite a while now.
Sent from my HTC_Amaze_4G using xda app-developers app
Some car head decks support android USB then it would charge and do audio. Just make sure it's android compatible.
Good, then we shall fight in the shade!
dobbs3x said:
Some car head decks support android USB then it would charge and do audio. Just make sure it's android compatible.
Good, then we shall fight in the shade!
Click to expand...
Click to collapse
Well i can tell u most of those android compatible r meant can be connect n read as a mass storage,but not as ios.
Unless someone can make a custom rom like the one for 2012 model.
Has anyone tried USB audio on 4.4 yet? I recall reading they were making some changes to USB devices (may of just been mounting drives though).
I
Still no USB-OTG in kitkat
miketunes said:
Has anyone tried USB audio on 4.4 yet? I recall reading they were making some changes to USB devices (may of just been mounting drives though).
I
Click to expand...
Click to collapse
Just tried it. USB-OTG does not work on stock, unrooted 4.4. Neither flash drives nor USB Audio
Old-school said:
Just tried it. USB-OTG does not work on stock, unrooted 4.4. Neither flash drives nor USB Audio
Click to expand...
Click to collapse
When u guys saying otg works dor aosp or some kernel ,does that mean it works with an otg y cable aswell? Like reading files from flash n keep it charge while with flash drive on?
Sorry for the thread jack op.
U and i r on the same boat,i am doing a car mount too.
I am doing a 4g lte one.
I don't have a car, I have a scooter.
Problem fixed !
So it sounds like if I have the stock rom, with the elemental X, I can do USB audio? Do I need some kind of audio manager to specify where to send the output, or would the USB dac automatically disable the on-board headphone jack?
tried PAC rom 4.3 with elemental X 1.8
no go for the DAC audio.
sound is mute no matter what i do.
katsooba said:
tried PAC rom 4.3 with elemental X 1.8
no go for the DAC audio.
sound is mute no matter what i do.
Click to expand...
Click to collapse
so no-go on the PAC rom, but stock should work?
hagensieker said:
What you want is achievable. Nexus 7 2012 works best with Timur Kernel however Nexus 7 2013 with an AOSP build or stock with Elemental X kernel can have a USB DAC with an OTG Y cable that will simultaneously charge.
If you have Cyanogenmod you may need glitch kernel which does the same thing.
I have a HiFiMeDIY DAC and OTG Y cable (at home) but no reason I couldn't run the same thing in my car with a car charger.
John
Click to expand...
Click to collapse
I bought the HifiMeDIY DAC and am using stock 4.4.2 w/ Elemental X Kernal. I don't get any sound out of the dac. What did you have to do to enable the USB sound instead of built-in speakers?
The Nexus 7 is way better than you described it.
You have lots of options for car audio, and they all have downsides, but just to name a few:
Bluetooth (if your car has a bluetooth receiver)
Auxiliary input (if your car has one)
Slimport (you'd need an hdmi-audio converter, but it would sound great)
Wi-Fi direct (not very common for cars, though)
bmccoy11 said:
The Nexus 7 is way better than you described it.
You have lots of options for car audio, and they all have downsides, but just to name a few:
Bluetooth (if your car has a bluetooth receiver)
Auxiliary input (if your car has one)
Slimport (you'd need an hdmi-audio converter, but it would sound great)
Wi-Fi direct (not very common for cars, though)
Click to expand...
Click to collapse
Bluetooth (if your car has a bluetooth receiver) - I need the bluethooth to connect to other things, like an odb adapter and so on. Edit: The bluethooth connection doesnt always connect automatic whit the cars headunit either so that's another problem.
Auxiliary input (if your car has one) - The aux output aint that great, not good enough for my 3500$ audio system in my car.
Slimport (you'd need an hdmi-audio converter, but it would sound great) - Yes the problem is that I need to convert the audio to analoge. It needs a converter and it still doesnt give my headunit digital audio.
Wi-Fi direct (not very common for cars, though)- I use wifi to get my cars 4g connection to the Nexus 7
So in my case. This is just a really expensive angry birds game (Without sound)!
OK. So 2 years ago I saw a thread on the Nexus 7 tablet forums where someone essentially turn it into a car deck. At the time it was complicated, convoluted and buggy to say the least. Since then its been a thought exercise to make this work. How I wanted it to work. This is what I wanted:
Simple plug&play. One USB connection to carry high quality audio out from the device while still allowing it to charge. This is the most difficult. On the Nexus 7 it required a special kernel and plus the accessories had to be connected in the right sequence. Not exactly the one action set up I was going for.
The easy way to accomplish this was to use a standard USB charger and then use the headphone jack to send audio to the Aux input of the stereo. Great in theory! However the phones/tablets I have used always allowed alternator whine into the sound. Not ideal either.
Third common way is to use bluetooth audio. My Pioneer deck does support this. But we all know the quality of the sound from this is OK at best. Play some ripping guitar or something melodic and you can really hear the compression (watery, slurred "S"s sound). Not good enough for me.
Now when I had first read about this concept I started accumulating various adapters and parts to play with. First was a Behringer 202 External DAC. Its low cost but had decent reviews. Perfect for my installation. Plus the added benefit of several output format options, so a deck with an optical input could also be used if yours has one. With this I got a simple USB OTG with the Micro USB charger Y-cable. The one that has a standard female USB, the charger connection and the one to the device. Now this whole thing never worked properly. I ended up using the OTG cable with the DAC, but on my home stereo where I could place a Qi Pad under the Nexus (and my S4 before) to charge and the DAC for audio. At least I was using what I spent money on. Just not the way I wanted.
Fast forward to yesterday morning. I have had my Nexus 5 for a few months but had not tried this set up. The fussing with kernels on other devices and units over the years had me giving up. But I figured why not try with the DAC and standard charger connected (they were just sitting there after all). Low and behold it worked! And I mean perfectly! It was a big light had been turned on and the world was beautiful! Then I tried my M8 and it failed......but the Nexus 5 for the win! Oh, and even when connected to the power the DAC turned off when I disconnected the phone. So it shouldn't drain my truck's battery (though I parked on a hill tonight just in case!).
So! Here is my car installation that I was finally able to complete. I have included photos of the installation and the parts I used. It's in a list format that I hope follows the pictures. it will take me a post or three to get it all in! So bear with me.
Ingredients:
Nexus 5 (I am running Liquid Smooth for my ROM, I have not tested it on other ROMs at the time of this post).
External DAC. Like the Behringer 202 I used, but I would assume most would work.
USB OTG and Charging Cable
RCA to 3.5mm headset adapter.
Standard car charger. I have a Belkin 1A one that works like a charm. In theory you could use the USB on the stereo if included, but you may not charge reliably.
Standard USB to Micro USB cable
iBolt xDockPro for the HTC. This is optional, but i like the iBolt and their right angled USB is the right way for the Nexus. Which made the set up cleaner.
Car Home Ultra from the Play Store
So. The first photo shows all the stuff I used (minus the car deck and truck).
Second you will see I am in fact using the HTC Dock
Next is the DAC I used
Followed by the adapter cable
The the RCA adapter
The before picture. The sticky pad for the mount was there cause I was already using my iBolt with just a charger tucked in.
This one you will see I have taken the y-cable and connected it to the iBolt adapter. My dash had the room for this, you may need an extension as the y-cable is really short!
Dash is coming apart!
To be continued (I can only post so many pics at once!
Part Deux!
So the next photo shows my deck's AUX input. Now I bought this unit because it had a rear jack. So connected the headphone plug into the AUX jack.
These next four pictures are just to show which power supply I used and how the USB cable is run up to the y-adapter. Now it would be possible to use your stereos USB for power if equiped. I didn't for two reasons. First, the phone/stereo may think your connecting a flash drive (both unit could be trying to be the "host"). Second the stereo may not put out enough amperage to run both the phone and the connected DAC. So I just went with the separate supply. Plus its easy to disconnect it should I need too.
This is me connecting the DAC. Now I wanted to show this particular step as you can see the power light is NOT lit even when connected to vehicle power.
RCA cable is now connected to the DAC.
The set up all buttoned up!
To be continued.....
Trio!
This post is more about the proof of concept and the Car home Setup. Here it is!
Basically once the hardware was all set (1 & 2) I fired it up, and used Play Music (and others) making sure Bluetooth was NOT paired yet. Sounds AWESOME! Makes a night and day difference! Then I paired it for hands free while making sure the media wasn't connecting. Now went into Car Home Ultra and just set it to launch with the my stereo's bluetooth connection. My only next goal I need to finish is to get an NFC tag to control Bluetooth on the iBolt. Car Home is set to turn WiFi off automatically when its running, but my set up is reliant on BT running all the time (or have me remember to turn it on/off, but defeats my plug'n'play concept).
That's the gist of it. If you would like more details or suggestions please let me know!
So it's not just my Ford Fiesta that sends lots of noise to the charger? I am a little relieved, but it sucks to find out that this is somehow a "standard"...
Nice setup there!
daniel_loft said:
So it's not just my Ford Fiesta that sends lots of noise to the charger? I am a little relieved, but it sucks to find out that this is somehow a "standard"...
Nice setup there!
Click to expand...
Click to collapse
There is a fix. They make something called a "ground loop isolator" that can usually fix the noise generated from you alternator. Here is an example, quick google search brought it up. http://www.amazon.com/PAC-SNI-1-3-5..._sim_pc_3?ie=UTF8&refRID=1FEVW0RPFQ5W3V742E6G
You could put a more temporary/portable set up like mine, wouldn't be hard if your still having issues. Put all the parts together, stuff it all in an old cassette or floppy disk case with a few holes for the cables to stick out of.
Yeah, now the challenge is to find ways to make it work on more devices. It's really unfortunate that the M8 doesn't on Sense based ROMs (I plan on trying a GPE ROM in a few days to see if that makes a difference).
And I may now invest in a proper proclip mount so it's not up on the dash like that. But it works like a hot damn as is for now. Even with LTE on, display always on and streaming audio it charges, though pretty slow. Still. Better than not at all. And I can always turn the screen off if I wanted to give it more juice.
I have my Nexus 5 w/o the case using an iBolt mount I already had and a cheap qi charger and works great.
Nice Setup... I was actually looking for something like this. Thanks for posting
There are a lot of microUSB to USB + aux splitters on amazon for the Samsung Galaxy phones. Would these have worked all the same? Or does the Nexus 5 not have a docking capability that would sense the plug?
For those that don't know BlackBerry sells a blutooth adapter that uses power from the usb charging port on your after market stereo. I use it on mine. This thing is crazy small I hide it in the gap behind my stereo and the reception is good you have around a 10ft radius depending on where you hid your dongle.
http://shop.crackberry.com/blackberry-music-gateway/9A172A11438.htm
Nice I see you have a Colorado. I have a Nexus 7 in mine. I can say that after hours and days of troubleshooting ground noise I could not get rid of it. I had to use a ground loop isolator
Sent from my Nexus 5 using XDA Free mobile app
Can anyone who owns the G3 confirm that USB Audio Out (over an OTG cable) works through a DAC? I can't seem to find any information that confirms or discounts that this works.
Thanks!
PearcePowers said:
Can anyone who owns the G3 confirm that USB Audio Out (over an OTG cable) works through a DAC? I can't seem to find any information that confirms or discounts that this works.
Thanks!
Click to expand...
Click to collapse
It does work with my Fiio E17. Just tried it today after almost buying an app that was supposed to do so. My only complaint is that the DAC seems to be charging while connected to the G3.
jesadac said:
It does work with my Fiio E17. Just tried it today after almost buying an app that was supposed to do so.
Click to expand...
Click to collapse
Thanks, Jesadac! That's great news... I was hoping this was the case, as I believe the G2 also supported it.
I assume you're referring to the USB Audio Player Pro app? It truly doesn't replace the native ability to have a clean digital audio out signal for all sounds out of the phone.
I have the Fiio E18 and a friend has the VZW G3. We just tested the combo and it seems to work fine.
PearcePowers said:
Can anyone who owns the G3 confirm that USB Audio Out (over an OTG cable) works through a DAC? I can't seem to find any information that confirms or discounts that this works.
Thanks!
Click to expand...
Click to collapse
Just bought the new Cayin C5 DAC/Amp. My TMo LG G3 does not put audio out though the amp when connected via OTG. It registers it's connected I'm guessing because all audio is no longer played through the phone. Plugged into my friends Note 4 and it worked right away. Is this is G3 problem? We're both on Lollipop.
I know this is an old thread... but do I still need USB Audio Player Pro to get USB DAC to work? I thought Android 5.0+ brings USB audio, and right now my Beyerdynamic A100 doesn't work by "simply" plugging it in... however I do get about half second of audio and quits.
I go on LG G3 with app USB Audio Player PRO and HibyMusic app, my DAC is Hegel HD2 and DragonFly RED. Logitech USB headphones works too. with China OTG cable.
I can confirm Spotify and youtube doesn't play audio through usb (android 5.1.1), and it still mutes integrated speaker when connected:silly:. Must have usb-player i guess.
*Edit:*
Just so those who just joined in this converstation don't get too dragged into it, I've resolved this issue simply by buying what is called a ground loop noise isolator adapter. It's main purpose is to remove the static and whining noise you hear from your speakers when you plug your phone to the car charger while connected to the speakers. But at the same time, it is keeping the signal from the aux cable of your car on "hot" so that when you plug in the phone, the phone immediately picks up the aux signal and stays connected. I basically killed two birds with one stone by getting the adapter. Here is the adapter I purchased:
http://www.amazon.com/gp/aw/d/B001EAQTRI
I will make it clear here that this aux connectivity problem has nothing to do with how cheap or expensive your aux cable is. You can use the most expensive cable or the cheapest penny cable out there and if the problem exists between your phone and your car's aux, then it won't resolve it. Either change your car's head unit (which is a stupid thing to do) or simply get the adapter. Don't return the phone over this problem, its just a dumb move. The phone is amazing. LG will have a patch for it or someone will make a ROM that tackles the problem.
*end edit*
Hello all,
was wondering if anyone else with the G3 (not sure if it matters, but I have the 851 variant) is having a hard time getting their phone working with the audio jack coming from their car. I drive a 2007 Scion tC and never had any problem of weird issues connecting any of my previous phones (Moto Atrix 4G, LG Nitro HD, GSIII, Nexus 5 just to name a few) to the audio jack in my car. I'll just plug it in and it connects just fine.
But for some odd reason, the G3 is having tons of issues. When I plug in the audio jack to the phone, I see the audio jack icon pop up up top next to the clock, but then some times it will just disappear on its own. Other times, it will stay there, but when I play a media, may it be music, or video from any app, the sound will play out of the speaker on the phone and not the car speakers. Unplugging it while the media is playing and replugging it again will not change anything, but if I stop the media playback, unplug it and then plug it back in, and the icon reappears and then I tap play immediately, the audio will then come out from the car speakers. Some times I have to do this multiple times to finally get it to work.
The strangest thing is, this does not happen if I plug anything else to the G3, such as a headset or an external speaker or any other devices, only in my car. It even works fine in any other car as far as I know. I've tried different audio cables in my car but it still does the same thing, so it doesn't seem to be the cable.
Is there some kind of sensor in the phone that detects connectivity of the phone to another device? I realize that when I plug in the phone to my car, the car speakers makes a couple of whining noises before it goes quiet, sort of sending or receiving a signal from the phone.
Can anybody please help me? I want to say that the phone is defective, but I can't proof so since it works just fine with any other devices. Could it be the head unit in my car is incompatible with the phone? Any advice is appreciated. Thanks!
http://forum.xda-developers.com/showthread.php?t=2802719
Not just you. I've found that if I start my music playing, and then plug in my aux cord I can usually get it to work
bfranklin1986 said:
http://forum.xda-developers.com/showthread.php?t=2802719
Not just you. I've found that if I start my music playing, and then plug in my aux cord I can usually get it to work
Click to expand...
Click to collapse
Thanks bfranklin, I didn't realize there was another thread about it. Wish all the G3 are under the same group.
I noticed i get some crackling feedback when i hit play on a track.. but then it works fine and even with moving the aux jack it doesn't keep cracking... just on initial play/loading of the music player
I have to plug the cable in very slow or it won't work.
Sent from my LG-D851 using XDA Free mobile app
Eckono said:
I have to plug the cable in very slow or it won't work.
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
That was my trick initially but eventually even that didn't work. Someone mentioned to try plugging in a charger first and then plug in the aux cable and that worked. But now I bought a ground loop noise isolator and that has resolved the problem completely. I also don't get so much popping noise and no whining noise when I charge the phone while the car is running. Here's what I bought:
http://www.amazon.com/gp/aw/d/B001EAQTRI
Sent from my LG-D851 using XDA Free mobile app
Same issue with me this is your work around guys a bluetooth adapter its amazing best investment I made in a while connect your phone audio is beautiful phone calls are great also and its more convenient!
http://www.bestbuy.com/site/isimple...radio-module-black/1672638.p?id=1219059088112
jamal717 said:
Same issue with me this is your work around guys a bluetooth adapter its amazing best investment I made in a while connect your phone audio is beautiful phone calls are great also and its more convenient!
http://www.bestbuy.com/site/isimple...radio-module-black/1672638.p?id=1219059088112
Click to expand...
Click to collapse
Page doesn't exist hehe.
Bluetooth uses more battery then aux doesn't it?
Sent from my LG-D851 using XDA Free mobile app
Sorry but mine works perfect with my monster flat cable going into my aux port
BACARDILIMON said:
Sorry but mine works perfect with my monster flat cable going into my aux port
Click to expand...
Click to collapse
If you use low quality Audio cables like Monster sells it will be higher resistance than a quality cable and should register without issue. The phone struggles with discovering the connection.
00dahc said:
If you use low quality Audio cables like Monster sells it will be higher resistance than a quality cable and should register without issue. The phone struggles with discovering the connection.
Click to expand...
Click to collapse
???? So if I understand the monster cable is a cheap cable and phone has issues with better higher end cables?
BACARDILIMON said:
???? So if I understand the monster cable is a cheap cable and phone has issues with better higher end cables?
Click to expand...
Click to collapse
Higher quality cables, yes, I looks that way.
BACARDILIMON said:
???? So if I understand the monster cable is a cheap cable and phone has issues with better higher end cables?
Click to expand...
Click to collapse
I'm gonna disagree here bc I'm using a cable from a Wal-Mart discount bin, which is I'm thinking the cheapest kind available, and it doesn't work right.
bfranklin1986 said:
I'm gonna disagree here bc I'm using a cable from a Wal-Mart discount bin, which is I'm thinking the cheapest kind available, and it doesn't work right.
Click to expand...
Click to collapse
I was not saying that. If you use Griffen cable at 14 . or monster cable at 20. Or rocketfish at 18. They all work the same. Just not buying that it is a cable issue. Hardware more like it. I actually just order a eBay cable for .99 cents to prove this totally wrong.
This has nothing to do with cables. I literally tried over 6 different cables and nothing worked between my phone and my car's aux port. Yet I used the same cables in my friend's car (old Nissan sentra) that has an aux port and they all worked fine with the phone. Also used a cassette aux adapter kit in my gf's sister's old SUV and it works fine with it.
This is purely hardware compatibility issue. Some head unit's aux port stays hot at all times, others don't. Some probably reacts faster than others and connects immediately so the phone doesn't drop connectivity before engaging. Again, like I've mentioned, you can either circumvent the issue by using the "charge phone first then plug in aux cable" trick, or simply buy a ground loop isolator adapter which keeps the connection hot. LG will fix the problem eventually. It was an annoyance, but a minor one, and i can't be any happier with this phone despite of the connection issue.
Sent from my LG-D851 using XDA Free mobile app
Hey guys and gals,
can you guys all do me a favor and head to my other thread when you have a chance. I'm making a list of cars and its head unit that is either compatible or not with the G3 from the get go. Please support it by providing your answers so I can populate the list.
http://forum.xda-developers.com/tmo...-aux-car-head-unit-list-t2830394#post54446653
Thanks everyone!
aquariuz23 said:
Page doesn't exist hehe.
Bluetooth uses more battery then aux doesn't it?
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Well see i thought the same thing but this works perfectly and just google is Blustream isbt52
No problem here with g3 and my tuscan aux in. I do run soundabout pro and set headset output to wired...
blasted by TMO G3
Bought that adapter from the OP and it didn't make a difference. Buzzing was still there.
Sent from my LG-D851 using XDA Premium 4 mobile app
I ended up getting a Bluetooth to aux adapter to fix this problem
Sent from my LG-D851 using XDA Free mobile app