Has anyone been successful in getting any applications working with the heart rate monitor? I was really hoping that from switching from the Gear 2 Neo that Google would allow for 3rd party application to read the heart rate and I can get an accurate (ish) measurement of my heart rate during indoor workouts. Apps such as MapMyFitness and Strava to name a few.
I know that the 360 constantly measures my heart rate throughout the day but I want to be able to count calories from a workout and see my heart rate graph after a high cardio workout.
Bumping because I posted in generic "Android Wear" forum and didn't know about this forum (had moderator move it but appeared on 2nd page). After reading through this forum doesn't seem like there is any hope yet...
we need this
Something I don't like about google is all of this stuff should have been out from the start
What I would like to see and have yet to find. I have a Polar Bluetooth Heart Rate Monitor and it syncs to My motox 2014 with various apps. I want to display my current Heart Rate, calories distance, pace etc etc.
I thought Runtasic or Runkeeper would do that, but havent been able to make it work yet.
Show Heart Rate and/or Steps on Watch
Many are disappointed in the absence of this capability. Adding it would put the Moto 360 in the same commercial space as the Microsoft Band...which I had and returned because it was too limited.
A hope on the horizon comes from the makers of the app WatchMaker who said that they are working on displaying heart rate and/or steps in one of the customer watch face designs. No date announced.
NoAxToGrind said:
Many are disappointed in the absence of this capability. Adding it would put the Moto 360 in the same commercial space as the Microsoft Band...which I had and returned because it was too limited.
A hope on the horizon comes from the makers of the app WatchMaker who said that they are working on displaying heart rate and/or steps in one of the customer watch face designs. No date announced.
Click to expand...
Click to collapse
Already implemented in watchface
Sent from my HTC One_M8 using XDA Free mobile app
This could be useful! (google fit)
https://play.google.com/store/apps/details?id=com.ryansteckler.heartsync&hl=en
nielsbrakel1998 said:
This could be useful! (google fit)
https://play.google.com/store/apps/details?id=com.ryansteckler.heartsync&hl=en
Click to expand...
Click to collapse
The app has a lot of promise and does exactly what a lot of us have been looking for however...
It uses a lot of battery... A LOT of battery. Its default setting is to continually monitor your heart rate and in doing so, cause my 360 to wear out after about 4 hours of use. 12 is typical for me. You can open the app on the watch and tap the heart until the circle quits spinning and that puts it into standby mode and the battery life improves. Hopefully future updates will make toggling it on and off a lot easier.
To see your heart rate in Google fit, you must launch fir and hit the + at the bottom of the screen to add another graph and it starts tracking your heart rate.
Its a "donate" app so be prepared to cough up a buck if you want to unlock all the features... and support the dev and encourage him to continue to support it. IMHO, its worth it.
David
I Don't Think It's Implemented in Watchface
blacklistedcard said:
Already implemented in watchface
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I downloaded it and paid for it. Saw lots of "tags" but no explanation of which tag might display heartrate or steps on the watch face. Maybe it's my lack of understanding the app.
Uninstalled it and got my refund. I am contacting developer by email to see if I am missing something. Will reply back here with instructions if they help.
---------- Post added at 03:20 PM ---------- Previous post was at 02:55 PM ----------
nielsbrakel1998 said:
This could be useful! (google fit)
Click to expand...
Click to collapse
I tried the link (sorry I can't quote it here...it's in the original reply to my post) and I got an error. That gave me a search box on Google Play and I typed in "heartsync" (without the quotes, of course). That gave me Heartsync. Installed it and trying it.
I am pretty sure that it does not display steps or heart rate on watch face. Without donation, I only get one measurement uploaded to Google Fit. Will donate and test some more.
---------- Post added at 04:15 PM ---------- Previous post was at 03:20 PM ----------
blacklistedcard said:
Already implemented in watchface
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Checked with the developer who was very responsive. As of now, steps and heart rate are not implemented on Watchface.
DaveTN said:
The app has a lot of promise and does exactly what a lot of us have been looking for however...
It uses a lot of battery... A LOT of battery. Its default setting is to continually monitor your heart rate and in doing so, cause my 360 to wear out after about 4 hours of use. 12 is typical for me. You can open the app on the watch and tap the heart until the circle quits spinning and that puts it into standby mode and the battery life improves. Hopefully future updates will make toggling it on and off a lot easier.
To see your heart rate in Google fit, you must launch fir and hit the + at the bottom of the screen to add another graph and it starts tracking your heart rate.
Its a "donate" app so be prepared to cough up a buck if you want to unlock all the features... and support the dev and encourage him to continue to support it. IMHO, its worth it.
David
Click to expand...
Click to collapse
Thanks for the shout-out. I'm the dev for HeartSync (and Amplify).
HeartSync is definitely a work in progress. I have a lot of plans for it. Right now, here's how it works:
1) Automatic mode. You set the frequency to whatever you want, and HeartSync will try to measure your heart rate that often. You can see when the next check time is in the phone app. When it's time, Heart Sync will try to get your heart rate, then upload it to google fit. If it can't get your heart rate within 60 seconds, it gives up. If you set it to 5 minutes, you'll get some battery drain. I prefer 30 minutes because the battery life is really good, and you get a good spread of heart rates in Google Fit charts.
2) Workout mode. You open the app on the watch, and tap the heart. Heart Sync will now continuously monitor your heart rate, even after the screen turns off. You also get a card notification on the watch during this time reminding you that heartsync is running in the background. This will update your heartrate continuously to Google Fit. To turn workout mode off, open the app again on the watch, and tap the heart again. The battery will last about 3-4 hours in this mode.
After any kind of measurement, you should be able to open Google Fit on your phone and refresh it. Then you can click "See Charts", "Add Chart", and add your heart rate chart.
I'm keeping HeartSync in stealth mode a little bit for now. I want to get a few more features in before I create an app thread for it here
Thanks,
Ryan
@cryptyk,
Ryan, thanks for the quick response and fixes that you pushed out. App is working very well now and battery life is much improved.
Keep up the great work!
David
NoAxToGrind said:
I downloaded it and paid for it. Saw lots of "tags" but no explanation of which tag might display heartrate or steps on the watch face. Maybe it's my lack of understanding the app.
Uninstalled it and got my refund. I am contacting developer by email to see if I am missing something. Will reply back here with instructions if they help.
---------- Post added at 03:20 PM ---------- Previous post was at 02:55 PM ----------
I tried the link (sorry I can't quote it here...it's in the original reply to my post) and I got an error. That gave me a search box on Google Play and I typed in "heartsync" (without the quotes, of course). That gave me Heartsync. Installed it and trying it.
I am pretty sure that it does not display steps or heart rate on watch face. Without donation, I only get one measurement uploaded to Google Fit. Will donate and test some more.
---------- Post added at 04:15 PM ---------- Previous post was at 03:20 PM ----------
Checked with the developer who was very responsive. As of now, steps and heart rate are not implemented on Watchface.
Click to expand...
Click to collapse
I have it on my watch right now?
Sent from my HTC One_M8 using XDA Free mobile app
---------- Post added at 09:02 AM ---------- Previous post was at 09:00 AM ----------
Posting screenshot
Sent from my HTC One_M8 using XDA Free mobile app
cryptyk said:
Thanks for the shout-out. I'm the dev for HeartSync (and Amplify).
HeartSync is definitely a work in progress. I have a lot of plans for it. Right now, here's how it works:
1) Automatic mode. You set the frequency to whatever you want, and HeartSync will try to measure your heart rate that often. You can see when the next check time is in the phone app. When it's time, Heart Sync will try to get your heart rate, then upload it to google fit. If it can't get your heart rate within 60 seconds, it gives up. If you set it to 5 minutes, you'll get some battery drain. I prefer 30 minutes because the battery life is really good, and you get a good spread of heart rates in Google Fit charts.
2) Workout mode. You open the app on the watch, and tap the heart. Heart Sync will now continuously monitor your heart rate, even after the screen turns off. You also get a card notification on the watch during this time reminding you that heartsync is running in the background. This will update your heartrate continuously to Google Fit. To turn workout mode off, open the app again on the watch, and tap the heart again. The battery will last about 3-4 hours in this mode.
After any kind of measurement, you should be able to open Google Fit on your phone and refresh it. Then you can click "See Charts", "Add Chart", and add your heart rate chart.
I'm keeping HeartSync in stealth mode a little bit for now. I want to get a few more features in before I create an app thread for it here
Thanks,
Ryan
Click to expand...
Click to collapse
hey there bud,
i bought the app and tested it. did 1 hour cardio with it continuously monitoring my heart rate. after i'm done, i checked the data and voila, nothing got synced to google fit. what did i miss?
Here's what I did:
1. Run the app in phone so I can easily see heart rate while doing plyometrics.
2. Set it to update every 5 mins.
3. opened the app in watch and then tap the heart to enable workout mode.
4. at the end of the workout, i tap the heart icon to stop workout mode.
is the data stored in the watch, can it be retrieved and synced to google fit?
thanks!
peekeesh said:
hey there bud,
i bought the app and tested it. did 1 hour cardio with it continuously monitoring my heart rate. after i'm done, i checked the data and voila, nothing got synced to google fit. what did i miss?
Here's what I did:
1. Run the app in phone so I can easily see heart rate while doing plyometrics.
2. Set it to update every 5 mins.
3. opened the app in watch and then tap the heart to enable workout mode.
4. at the end of the workout, i tap the heart icon to stop workout mode.
is the data stored in the watch, can it be retrieved and synced to google fit?
thanks!
Click to expand...
Click to collapse
Hi - I'm so sorry it didn't work
It's still relatively new, and I'm still squashing some initial launch bugs. I just released a new version last night that should be more stable, and also includes some charting in the app.
What's not explained very well yet is that there are two modes:
1) Auto check. This is what you used when you moved the setting to 5 minutes. That will check your heart rate throughout the day.
2) Workout mode. This will measure your heart rate once per second until you stop it. To get into workout mode, launch HeartSync on your watch, then tap the heart icon. You'll see it start monitoring. Make sure you stop it when you're done because monitoring continuously will wear down your battery in about 3.5 hours.
HeartSync will keep getting better. Stick with me while I work out some of these early bugs
Thanks,
Ryan
Monitoring while using other apps
@cryptyk
Man, your app is EXACTLY what I was looking for! Just one question before I buy it: does it monitor the heart rate while I'm using other apps on the smartwatch? For instance, if I'm using RunKeeper or a similar app to track my workout (without heart rate), and start HeartSync in workout mode, will both work at the same time? RunKeeper in the foreground showing the workout stats, HeartSync in the background collecting the heart rate.
Thanks!
dbolivar said:
@cryptyk
Man, your app is EXACTLY what I was looking for! Just one question before I buy it: does it monitor the heart rate while I'm using other apps on the smartwatch? For instance, if I'm using RunKeeper or a similar app to track my workout (without heart rate), and start HeartSync in workout mode, will both work at the same time? RunKeeper in the foreground showing the workout stats, HeartSync in the background collecting the heart rate.
Thanks!
Click to expand...
Click to collapse
Great question. It *should*. You can give it a try for free. The workout mode of the app is free.
cryptyk said:
Great question. It *should*. You can give it a try for free. The workout mode of the app is free.
Click to expand...
Click to collapse
Tested and it does work. However, I noticed a strange behavior, that may or may not be related to your app: after some seconds, possibly right after the screen goes off, the heart rate stucks and doesn't update anymore (shows a constant value). The green LED is on, and it doesn't matter if I move the watch, clean the sensor etc. It only restarts measuring after I stop it in the app, and tap the icon again - just to stop after a few seconds, restarting the whole thing.
I say it may not be your app, because I noticed a similar behavior in other fitness apps like Endomondo. In fact, your app seems to have a good side effect for these other apps, triggering the heart rate measurement when it doesn't start or freezes (happens frequently with Endomondo). So, is it a design issue of Android Wear or Moto 360, not allowing a constant heart rate measuring for a long time? Is it my device which is faulty (have you tested the real-time measurement for a long time)? Is it a configuration / software issue, which can be solved by a reset (will try it later)?
Finally, I noticed some bugs and have some suggestions which I hope can help your development:
1) After the screen goes off, we have to select "Open" to see the heart rate from the app. That's fine, but it seems multiple instances are being started each time we tap "Open", because I have to swipe right several times to close it (same screen showing for each swipe).
2) You could allow showing the heart rate, after the app is minimized, by clicking on it and swiping left, instead of having to tap "Open". (Hope I made myself understood - it's the way some apps behave to show details.)
3) The heart rate graph, in the phone app, shows the wrong time, although it's correct in Google Fit. Perhaps you are not taking in consideration the time zone, getting UTC time?
4) It may be out of the scope of this app, but a good addition would be configurable heart rate limits (low and high), vibrating the watch or showing other kind of alert when out of range.
Well, I'll buy the app, because the basic functions work, it's not expensive, and I want to support your development (it's good to see the developer close to the community, hearing us). Thanks for that and keep up the good work!
Quick Comment on 1.0.8
Nice Progress.
As others have requested, it would be nice to keep screen on (if it doesn't completely kill the battery) during workout (or some other special) mode.
Like the new graphs. Seeing success with the upload to Google Fit.
Keep up the good work; hope it's a big success for you.
dbolivar said:
Tested and it does work. However, I noticed a strange behavior, that may or may not be related to your app: after some seconds, possibly right after the screen goes off, the heart rate stucks and doesn't update anymore (shows a constant value). The green LED is on, and it doesn't matter if I move the watch, clean the sensor etc. It only restarts measuring after I stop it in the app, and tap the icon again - just to stop after a few seconds, restarting the whole thing.
I say it may not be your app, because I noticed a similar behavior in other fitness apps like Endomondo. In fact, your app seems to have a good side effect for these other apps, triggering the heart rate measurement when it doesn't start or freezes (happens frequently with Endomondo). So, is it a design issue of Android Wear or Moto 360, not allowing a constant heart rate measuring for a long time? Is it my device which is faulty (have you tested the real-time measurement for a long time)? Is it a configuration / software issue, which can be solved by a reset (will try it later)?
Finally, I noticed some bugs and have some suggestions which I hope can help your development:
1) After the screen goes off, we have to select "Open" to see the heart rate from the app. That's fine, but it seems multiple instances are being started each time we tap "Open", because I have to swipe right several times to close it (same screen showing for each swipe).
2) You could allow showing the heart rate, after the app is minimized, by clicking on it and swiping left, instead of having to tap "Open". (Hope I made myself understood - it's the way some apps behave to show details.)
3) The heart rate graph, in the phone app, shows the wrong time, although it's correct in Google Fit. Perhaps you are not taking in consideration the time zone, getting UTC time?
4) It may be out of the scope of this app, but a good addition would be configurable heart rate limits (low and high), vibrating the watch or showing other kind of alert when out of range.
Well, I'll buy the app, because the basic functions work, it's not expensive, and I want to support your development (it's good to see the developer close to the community, hearing us). Thanks for that and keep up the good work!
Click to expand...
Click to collapse
Wow! Awesome feedback. I've added all 4 of these to the issue reporting system. I'll get the bugs fixed and enhancements included.
Thanks!!!
Ryan
---------- Post added at 08:10 PM ---------- Previous post was at 08:09 PM ----------
NoAxToGrind said:
Nice Progress.
As others have requested, it would be nice to keep screen on (if it doesn't completely kill the battery) during workout (or some other special) mode.
Like the new graphs. Seeing success with the upload to Google Fit.
Keep up the good work; hope it's a big success for you.
Click to expand...
Click to collapse
I've added this to the enhancement list. Look for it in a future release
Ryan
To Ryan,
I'd like to report some issues with this app:
1. For some reason, tapping the screen to stop the continuous monitoring does not work if it is ran for 30 or more minutes. A restart is needed to workaround it.
2. If update automatically is on and im not wearing my watch, it will still try to check for heart beat and will not stop until it detects one.
Sent from my LG-D851 using Tapatalk
Related
Hello Everyone,
I have no need for or desire to use any of the fitness features of the 360, such as the heart monitor or Fit. I always see the little heart rate monitor firing up and I see this as a good way of saving battery since I dont use it. Does anyone know how to turn off, or uninstall these? Thanks!
Great question.
please let us know if you find out
I haven't done it myself, but if you're rooted you can try disabling them via adb.
Sent from my HTC6525LVW using XDA Free mobile app
Ironkidz said:
Hello Everyone,
I have no need for or desire to use any of the fitness features of the 360, such as the heart monitor or Fit. I always see the little heart rate monitor firing up and I see this as a good way of saving battery since I dont use it. Does anyone know how to turn off, or uninstall these? Thanks!
Click to expand...
Click to collapse
In Android Wear on the phone under "Show me my heart rate" I have mine set on Fit and I never see the heart rate monitor on my watch.
Wiley_11 said:
In Android Wear on the phone under "Show me my heart rate" I have mine set on Fit and I never see the heart rate monitor on my watch.
Click to expand...
Click to collapse
If you look at the back of your watch, you will still see the green sensor in use.
Ironkidz said:
If you look at the back of your watch, you will still see the green sensor in use.
Click to expand...
Click to collapse
Ahh. I thought you were talking alerts on watch, sorry. I hope turning it off completely comes in the next update. :fingers-crossed:
Ironkidz said:
Hello Everyone,
I have no need for or desire to use any of the fitness features of the 360, such as the heart monitor or Fit. I always see the little heart rate monitor firing up and I see this as a good way of saving battery since I dont use it. Does anyone know how to turn off, or uninstall these? Thanks!
Click to expand...
Click to collapse
In the android wear app, select FIT for countsteps and show heart rate, then on watch select FIT and slide through to its options. do show step card OFF, daily goal NONE, and save fitness data off.
currently thats the only way i know how
It still doesn't work - mine keeps showing me the daily goal, almost hourly.
Guys,
I'd like to introduce our new shiny app, SleepWake , which tracks your heart rate and buzzes like hell when you doze off. It's useful for driving, or for boring lectures at uni :angel:. Can you guys give a go and tell what to improve? Ah, the forum thought I'm a spammer and doesn't allow link , so just use PlayStore and search for SleepWake please.
Cheers.
Sounds interesting. But I'm curious how constant heart rate monitoring might drain the battery?
Chris_c81 said:
Sounds interesting. But I'm curious how constant heart rate monitoring might drain the battery?
Click to expand...
Click to collapse
Hi, I don't read heart rate constantly, the app just starts a session when it senses some patterns in the accelerometer that match movements at high speed. Another option is the user input the interval to track (in Settings). Hope I explain it clearly enough. Cheers
This is the app link play.google.com/store/apps/details?id=com.sleepalert.heartrate
Just got my first smartwatch, the 360, yesterday.
Is there an app for tracking running/cycling without having to carry your phone around?
The Google Fit is very basic and gets calories very wrong when it comes to cycling. And Endmondo doesn't support standalone tracking for the 360 (would that becaome available with 5.1.1?). There are loads of apps in store but I can't install and check them all, anyone know of any?
Thank you
bv90andy said:
Just got my first smartwatch, the 360, yesterday.
Is there an app for tracking running/cycling without having to carry your phone around?
The Google Fit is very basic and gets calories very wrong when it comes to cycling. And Endmondo doesn't support standalone tracking for the 360 (would that becaome available with 5.1.1?). There are loads of apps in store but I can't install and check them all, anyone know of any?
Thank you
Click to expand...
Click to collapse
RunKeeper https://play.google.com/store/apps/details?id=com.fitnesskeeper.runkeeper.pro&hl=en
rsalas187 said:
RunKeeper https://play.google.com/store/apps/details?id=com.fitnesskeeper.runkeeper.pro&hl=en
Click to expand...
Click to collapse
It is a phone app wich works with phone GPS and you need satellites in view. Just send data to wear screen but not a Wear Fitness app. It do no use the watch sensor
Cinch. Good app by an XDA dev.
David
rsalas187 said:
RunKeeper https://play.google.com/store/apps/details?id=com.fitnesskeeper.runkeeper.pro&hl=en
Click to expand...
Click to collapse
Nope, I tried it and it doesn't use the watch.
DaveTN said:
Cinch. Good app by an XDA dev.
David
Click to expand...
Click to collapse
This one just takes HR every so often in "work out" mode, the only option on the watch.
I may be asking too much. Maybe with 5.1.1 update we'll see more (some) standalone running apps.
The watch has no GPS, and not the right kind of sensors to determine a distance traveled. All you would get out of an app on a watch is time and heartrate sensor recording.
Smartwatches are not powerful, they work by offloading anything they can to the phone.
I use RunKeeper for my runs and have my phone with me. Since the Moto 360 does not have GPS no GPS app will work on the watch without a phone.
For a stand alone app I have found that UP by Jawbone does a good job tracking activity. If I walk inside at lunch time it will notice I was active and ask if I did an activity and then will calculate the steps into what that activity was. It has like 20 different activities including cycling. I have found that the step count comes pretty close to calculating the correct distance for running or walking, but will not be as accurate as GPS.
Here is the thread on how to link your watch to UP!
http://forum.xda-developers.com/moto-360/general/how-to-log-steps-to-fitness-pal-moto-t2997158
Hi there,
I just got a Huawei Watch active. I want to use the watch as an activity tracker wich tracks my activity and if possible also my heart rate occasionally. I want to synchronize my burned calories with myfitnesspal.
Right now I got UP By Jawbone and Google fit. I use Google fit as main platform to collect all my sport tracking etc However, up and Google fit does not synchronize with each other.
Does anyone know a good app or good app setup so I can :
- daily activity tracking
- sleep tracking (sleep like android?)
- sport tracking (crossfit)
- heart rate measurement
- correct calorie counting
Thanks!
Yay! Someone who is actually using it as activity tracker. Me too. It seems most folks could care less.
Anyway, I tried several heart rate apps and settled on Perfect Cinch. It doesn't do constant (which kills battery anyway) but you can set it to check at different intervals. There is a two week free trial and it's worth paying for after that.
Sleep for Android seems to be the best app for that function.
I also use Fit, Up, and Huawei Wear. Still trying to see best combination of what works.
And there is an app called Fithub that will sync various apps into one.
Hello guys, anyone using the watch at gym?
I'm searching for a way how it should be useful for workout.
Today I did 24 different exercises at the gym but none was recorded.
How it should be used as a fitness tracker?
Finally any application for tracking the stats? Samsung health is pretty weak at this.
bill_viper said:
Hello guys, anyone using the watch at gym?
I'm searching for a way how it should be useful for workout.
Today I did 24 different exercises at the gym but none was recorded.
How it should be used as a fitness tracker?
Finally any application for tracking the stats? Samsung health is pretty weak at this.
Click to expand...
Click to collapse
Only around 6 exercises are automatically tracked and you have e to switch on that tracking as it is not enabled by default.
You have to manually record your gym sessions I'm afraid.
Doktaphex said:
Only around 6 exercises are automatically tracked and you have e to switch on that tracking as it is not enabled by default.
You have to manually record your gym sessions I'm afraid.
Click to expand...
Click to collapse
Oh I see, so there's no automation for the exercises. And it's pretty hard to switch them on when you're on 1 minute exercise and no rest between all of them.
The watch looks nice but is very bad for sports tracking. I play soccer and there is no track for that with this watch. I tried with "other workout" option but is very inaccurate
Bliko777 said:
The watch looks nice but is very bad for sports tracking. I play soccer and there is no track for that with this watch. I tried with "other workout" option but is very inaccurate
Click to expand...
Click to collapse
You can Try Map My run - but best is gear tracker ( has corrections) - app like polar.
I just use mine at the gym to track my heart rate so using the "other workout" to track it is fine. Everything else seems to be redundant.
Does anyone know how to change the number of reps for the exercises? I think it's set at 10 reps by default?
The us an option for circuit training and it will give continuous reading
Sent from my SM-T830 using Tapatalk
I'm curious as I do weight training also, I tried using 'Other workout' and "weight machine' but I find that it's continually adding calories burnt whilst in between sets (1 min rest). Has anyone found the best way to track weight training without having to pause/resume the workout?
Have a look at the STRAVA app for the galaxy watch, this app brings more possible workout scenarios to the watch.
Try GymRun. It allows you to configure your workout with sets, reps as well as rest periods on your phone, and then you can sync with watch. Excercises will appear in the same order on your phone, and rest timer will begin automatically as soon as you press on "set completed" button. You will also be able to change how many reps/sets/pounds you did directly from the watch (you get to enter estimations on your phone). It costs 5 USD but worth the money in my opinion (Beware to not but the premuim version on mobile because that is a completly different thing). If you want something that would count the reps for you, you can use the embeded app for that, but like others said you have to start it manualy each time.