Related
Here's the issue. I purchased the At&t s3 (SGH-I747) last year. Long story short, I wanted to go to T-Mobile prepaid with the same phone.
I purchased the SIM activation kit for $10, popped my SIM in and it worked!
Before I put the SIM in it though, I paid for an unlock code. I still have the code.
No 'Network Unlock' screen.
No prompt for my unlock code.
I am getting H+ speeds with the at&t s3 on T-Mobile prepaid without doing ANYTHING.
My question is:
Why cant I get to the unlock screen? I have tried to dial "#7465625*638*# for the prompt to popup and NOTHING.
Can someone tell me...
1. Can I flash a T-mobile rom to this phone? (every time i try I get a build.prop error, even after changing the model to the T999 and all that jazz),
so I can't install a T-Mo rom?
2. Do I have to flash a modem/radio or anything else like that?
3. Or, should I just continue to flash At&t Roms with the t-mo prepaid sim?
I have searched for a while now, and noone has my problem. I never expected to just switch sim's and it would work, so ANY help would be appreciated.
Thanks!
bradhoschar said:
Here's the issue. I purchased the At&t s3 (SGH-I747) last year. Long story short, I wanted to go to T-Mobile prepaid with the same phone.
I purchased the SIM activation kit for $10, popped my SIM in and it worked!
Before I put the SIM in it though, I paid for an unlock code. I still have the code.
No 'Network Unlock' screen.
No prompt for my unlock code.
I am getting H+ speeds with the at&t s3 on T-Mobile prepaid without doing ANYTHING.
My question is:
Why cant I get to the unlock screen? I have tried to dial "#7465625*638*# for the prompt to popup and NOTHING.
Can someone tell me...
1. Can I flash a T-mobile rom to this phone? (every time i try I get a build.prop error, even after changing the model to the T999 and all that jazz),
so I can't install a T-Mo rom?
2. Do I have to flash a modem/radio or anything else like that?
3. Or, should I just continue to flash At&t Roms with the t-mo prepaid sim?
I have searched for a while now, and noone has my problem. I never expected to just switch sim's and it would work, so ANY help would be appreciated.
Thanks!
Click to expand...
Click to collapse
since your device is still an AT&T branded Galaxy S III (SGH-i747), you must keep with ROMs designed for that phone. flashing T-Mobile branded Galaxy S III (SGH-T999) ROMs will brick your device, same thing goes for flashing modems.
just because your SIM and Carrier is now T-Mobile, doesn't mean your phone is.
Okaham said:
since your device is still an AT&T branded Galaxy S III (SGH-i747), you must keep with ROMs designed for that phone. flashing T-Mobile branded Galaxy S III (SGH-T999) ROMs will brick your device, same thing goes for flashing modems.
just because your SIM and Carrier is now T-Mobile, doesn't mean your phone is.
Click to expand...
Click to collapse
You got that right.
:thumbup:
Sent while sleeping in chair.
Okaham said:
since your device is still an AT&T branded Galaxy S III (SGH-i747), you must keep with ROMs designed for that phone. flashing T-Mobile branded Galaxy S III (SGH-T999) ROMs will brick your device, same thing goes for flashing modems.
just because your SIM and Carrier is now T-Mobile, doesn't mean your phone is.
Click to expand...
Click to collapse
Wrong. Flashing an rom meant for the AT&T variant of the S3 on a T-Mobile variant S3 and vice versa will not brick the device. APN setting may get messed up and you have to enter them manually but it will not brick the device. Flashing a ROM for the international S3 on a U.S. variant of the S3 and vice versa will brick the device.
I wouldn't recommend flashing modems between the variants of S3s, that may or may not brick the device but wouldn't try it.
|When Emotion Goes up, Logic Goes Down|
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
bradhoschar said:
Here's the issue. I purchased the At&t s3 (SGH-I747) last year. Long story short, I wanted to go to T-Mobile prepaid with the same phone.
I purchased the SIM activation kit for $10, popped my SIM in and it worked!
Before I put the SIM in it though, I paid for an unlock code. I still have the code.
No 'Network Unlock' screen.
No prompt for my unlock code.
I am getting H+ speeds with the at&t s3 on T-Mobile prepaid without doing ANYTHING.
My question is:
Why cant I get to the unlock screen? I have tried to dial "#7465625*638*# for the prompt to popup and NOTHING.
Can someone tell me...
1. Can I flash a T-mobile rom to this phone? (every time i try I get a build.prop error, even after changing the model to the T999 and all that jazz),
so I can't install a T-Mo rom?
2. Do I have to flash a modem/radio or anything else like that?
3. Or, should I just continue to flash At&t Roms with the t-mo prepaid sim?
I have searched for a while now, and noone has my problem. I never expected to just switch sim's and it would work, so ANY help would be appreciated.
Thanks!
Click to expand...
Click to collapse
If you want to unlock the S3 (you must be stock to do this, stocked rooted may work, but I'm not sure):
Just dial the following keys *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
Options [3]Perso SHA256 OFF
(after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in
[6] Network Lock then choose
[4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone
|When Emotion Goes up, Logic Goes Down|
Hello.
If you have signal then why are you trying to use the code? It is unlocked already!
im not an expert but this is what i know from reading a lot:
1.- I installed a t-mobile (t999) rom modified to work in a att s3 (i747), i think you can flash a any rom from the t999 section (i am not sure about this)
2.- Do NOT try to install a modem from t-mobile or you will hard brick your phone.
3.- Thats a good idea, do it and let me know if it works.
I used this files to convert an i747 to a t999 http://forum.xda-developers.com/showthread.php?t=1771021&page=25 (read from post #246) so now i use customs roms for the t999 i did it because where i live do not have good signal, was stuck at edge and with those files now i have 3g signal.
Btw, i am in the $30 prepaid t mo plan.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
re: Hmm
xmanberserker said:
Hello.
If you have signal then why are you trying to use the code? It is unlocked already!
im not an expert but this is what i know from reading a lot:
1.- I installed a t-mobile (t999) rom modified to work in a att s3 (i747), i think you can flash a any rom from the t999 section (i am not sure about this)
2.- Do NOT try to install a modem from t-mobile or you will hard brick your phone.
3.- Thats a good idea, do it and let me know if it works.
I used this files to convert an i747 to a t999 http://forum.xda-developers.com/show...771021&page=25 (read from post #246) so now i use customs roms for the t999 i did it because where i live do not have good signal, was stuck at edge and with those files now i have 3g signal.
Btw, i am in the $30 prepaid t mo plan.
Click to expand...
Click to collapse
#1: If you have a Unlocked AT&T I747 Galaxy S3 you don't need any files to convert it to work on any T999 Tmobile roms.
#2: You can use any T999 Tmobile custom roms as long as you have an Unlocked & Rooted AT&T Galaxy S3 I747 Phone.
#3: There is no such thing as installing or flashing any files which would would change the frequency for 3G on a I747 phone.
#4: Your link is dead... LOL
#4: Your link is dead... LOL[/QUOTE]
http://forum.xda-developers.com/showthread.php?t=1771021&page=25 Fixed
Misterjunky said:
#1: If you have a Unlocked AT&T I747 Galaxy S3 you don't need any files to convert it to work on any T999 Tmobile roms.
#2: You can use any T999 Tmobile custom roms as long as you have an Unlocked & Rooted AT&T Galaxy S3 I747 Phone.
#3: There is no such thing as installing or flashing any files which would would change the frequency for 3G on a I747 phone.
#4: Your link is dead... LOL
Click to expand...
Click to collapse
That is not true. Before following these instructions ( http://forum.xda-developers.com/showthread.php?t=1771021&page=25 ) I could NOT install any t-mo rom as CWM verifies the make/model before installing the rom.
Hence, me having the 'installation cannot continue' build.prop=d2att.
So, now AFTER flashing the 4 files, I was able to install 3 different T-Mobile ROMS. XTREMEPERIA ( http://forum.xda-developers.com/showthread.php?t=2199018 ) was the only one that is giving me 4G. I know, I know, its all in the APN settings, but this is the only one that gave me truly 4G speeds with a T-Mo sim.
re: 3G/4G
bradhoschar said:
That is not true. Before following these instructions ( http://forum.xda-developers.com/showthread.php?t=1771021&page=25 ) I could NOT install any t-mo rom as CWM verifies the make/model before installing the rom.
Hence, me having the 'installation cannot continue' build.prop=d2att.
So, now AFTER flashing the 4 files, I was able to install 3 different T-Mobile ROMS. XTREMEPERIA ( http://forum.xda-developers.com/showthread.php?t=2199018 ) was the only one that is giving me 4G. I know, I know, its all in the APN settings, but this is the only one that gave me truly 4G speeds with a T-Mo sim.
Click to expand...
Click to collapse
You are right, clockworkmod (Rom Manager) does verify, however if you select
and flash the Tmobile T999 recovery image when flashing clockworkmod recovery
all is fine.
Another thing, if you have a unlocked i747 and flash any Tmobile cwm zip file rom as
soon as it reboots and you check the network in the phones settings it will display
"T-Mobile US" and will work properly without the need of any other files or conversions.
However the Unlocked I747 will never work with Tmobile's 3G or 4G networks.
Misterjunky said:
You are right, clockworkmod (Rom Manager) does verify, however if you select
and flash the Tmobile T999 recovery image when flashing clockworkmod recovery
all is fine.
Another thing, if you have a unlocked i747 and flash any Tmobile cwm zip file rom as
soon as it reboots and you check the network in the phones settings it will display
"T-Mobile US" and will work properly without the need of any other files or conversions.
However the Unlocked I747 will never work with Tmobile's 3G or 4G networks.
Click to expand...
Click to collapse
Ahh...good tip about CWM
I currently have 4g on my unlocked S3 from at&t currently on T-Mobile.
And, when I was on stock, I had 3g
re: Tmobile Network.
bradhoschar said:
Ahh...good tip about CWM
I currently have 4g on my unlocked S3 from at&t currently on T-Mobile.
And, when I was on stock, I had 3g
Click to expand...
Click to collapse
Yes but when you were on stock you were on the AT&T network not Tmobile.
Misterjunky said:
Yes but when you were on stock you were on the AT&T network not Tmobile.
Click to expand...
Click to collapse
No, that is incorrect. With the 4 files I flashed, I was on T-Mobile network. It was a T-Mobile ROM, T-Mobile sim, and T-Mobile radio.
bradhoschar said:
No, that is incorrect. With the 4 files I flashed, I was on T-Mobile network. It was a T-Mobile ROM, T-Mobile sim, and T-Mobile radio.
Click to expand...
Click to collapse
Quit saying you are using a T-Mobile radio before you help someone brick their phone. The radio files are NOT interchangeable between ANY of the US variants!
EtherealRemnant said:
Quit saying you are using a T-Mobile radio before you help someone brick their phone. The radio files are NOT interchangeable between ANY of the US variants!
Click to expand...
Click to collapse
Oh, my bad. I thought 'modem' and 'radio' were the same thing.
THEY ARE!!!!
Notice in the picture how under the 'phone' tab, it says MODEM.
Yes, I flashed all 4, and now have a t-mobile setup on an at&t s3.
bradhoschar said:
Oh, my bad. I thought 'modem' and 'radio' were the same thing.
THEY ARE!!!!
Notice in the picture how under the 'phone' tab, it says MODEM.
Yes, I flashed all 4, and now have a t-mobile setup on an at&t s3.
Click to expand...
Click to collapse
You need to specify that you are using an engineering image that T-Mobile used on the 747 before the T-999 was available to test the device. In general if you flash a T-Mobile radio image to a 747, you risk losing calls and data at minimum and a hard brick at worst. It is imperative to make sure to point out that it only works with THAT engineering set.
EtherealRemnant said:
You need to specify that you are using an engineering image that T-Mobile used on the 747 before the T-999 was available to test the device. In general if you flash a T-Mobile radio image to a 747, you risk losing calls and data at minimum and a hard brick at worst. It is imperative to make sure to point out that it only works with THAT engineering set.
Click to expand...
Click to collapse
Ahh...gotcha. Thats what it states in THAT OP, I just thought that once that build was on the phone, from that point on, any T-Mo anything would work. I did have the watermark on my wallpaper, but everything else said 't-mobile'.
But, yes in general, if you flash TMO onto AT&T, there be dragons.
Thanks all, and happy flashing!
Even with that configuration, the only thing T-Mobile you can flash is recovery and custom ROMs. A T-999 baseband or boot loader could very well cause a brick. Its a dangerous hack because it has everyone confused. For all intents and purposes, it is 747 software with T-Mobile's AWS capability. In fact it doesn't even seem to have DC-HSPA, only HSPA+ (21mbps versus 42). It has the benefit of supporting T-Mo LTE though.
Awesome
EtherealRemnant said:
Even with that configuration, the only thing T-Mobile you can flash is recovery and custom ROMs. A T-999 baseband or boot loader could very well cause a brick. Its a dangerous hack because it has everyone confused. For all intents and purposes, it is 747 software with T-Mobile's AWS capability. In fact it doesn't even seem to have DC-HSPA, only HSPA+ (21mbps versus 42). It has the benefit of supporting T-Mo LTE though.
Click to expand...
Click to collapse
Very good to know! Thanks for the info. Perhaps when T-Mo refarms their LTE, I won't have to do much to this beastly phone!
Thanks all!
:good:
bradhoschar said:
Very good to know! Thanks for the info. Perhaps when T-Mo refarms their LTE, I won't have to do much to this beastly phone!
Thanks all!
:good:
Click to expand...
Click to collapse
It doesn't make sense for T-Mobile to refarm their LTE. The 1700 AWS band is the most efficient spectrum they currently own and the AWS spectrum is going to be the most compatible across LTE networks. T-Mobile has pretty much no chance of ever getting the 700MHz that at&t and Verizon are using.
I am attempting to SIM unlock my L520 that's running MK1 baseband. I am not able to find older modems to flash onto my phone in-order for me to sim-unlock it. Would it work for me to flash a Sprint GS4 modem onto my GS4 mini instead? Any ideas?
masterm584 said:
I am attempting to SIM unlock my L520 that's running MK1 baseband. I am not able to find older modems to flash onto my phone in-order for me to sim-unlock it. Would it work for me to flash a Sprint GS4 modem onto my GS4 mini instead? Any ideas?
Click to expand...
Click to collapse
Were you able to do so?
also may i have a copy of your baseband.. mine is on mk2 and i have been trying to downgrade it to mk1 or the previous one.
i think don't work , i did try flash file modem of S4 L720 but fail ! my ideal must downgare OS 4.1.2 ...
masterm584 said:
I am attempting to SIM unlock my L520 that's running MK1 baseband. I am not able to find older modems to flash onto my phone in-order for me to sim-unlock it. Would it work for me to flash a Sprint GS4 modem onto my GS4 mini instead? Any ideas?
Click to expand...
Click to collapse
Hi, im trying the same thing, but i have NJ1 baseband, any idea of unlocking this device?, i tried with SSU.APK but my device does not have the option for GSM/UMTS, i think a downgrade its necessary.
rodorodo09 said:
Hi, im trying the same thing, but i have NJ1 baseband, any idea of unlocking this device?, i tried with SSU.APK but my device does not have the option for GSM/UMTS, i think a downgrade its necessary.
Click to expand...
Click to collapse
Could you unlock this phone (L520)?
edj809 said:
Could you unlock this phone (L520)?
Click to expand...
Click to collapse
Hello,nope, perhaps this device cannot be unlocked with this procedure. S4 mini is not supported for SSU.APK. I have successfully unlocked and rooted, S5 G900P, Mega L600 and S4 L720 and L720T, (L720T gets 3g and L720 Gets edge speed).
rodorodo09 said:
Hello,nope, perhaps this device cannot be unlocked with this procedure. S4 mini is not supported for SSU.APK. I have successfully unlocked and rooted, S5 G900P, Mega L600 and S4 L720 and L720T, (L720T gets 3g and L720 Gets edge speed).
Click to expand...
Click to collapse
can you explain me as I unlock please?
Noone can help us.
xx
So I'm stressing out cause i've been researching all day and have came up with a million answers so i decided i should just make a post and hope for the best.
I have a US Cellular Galaxy S3 SCH-R530U 4.3.1 ROOTED.
I already have a Straight Talk SIM Card in it, however it has no service hooked up. None of the hidden codes to unlock my SIM is working on 4.3.1 and they just keep saying No Network Found
I've read that i can somehow flash my phone to get it to work with Straight Talk but i dont know how? I know it can work.
I just need to basically unlock my SIM so that it can work on Straight Talks network.
idkxhiggins said:
So I'm stressing out cause i've been researching all day and have came up with a million answers so i decided i should just make a post and hope for the best.
I have a US Cellular Galaxy S3 SCH-R530U 4.3.1 ROOTED.
I already have a Straight Talk SIM Card in it, however it has no service hooked up. None of the hidden codes to unlock my SIM is working on 4.3.1 and they just keep saying No Network Found
I've read that i can somehow flash my phone to get it to work with Straight Talk but i dont know how? I know it can work.
I just need to basically unlock my SIM so that it can work on Straight Talks network.
Click to expand...
Click to collapse
Straight R530U and US cellular S3 R530U are identical handsets. Once you have ota 4.3, nothing can be done to revive the hidden menu for SIM programming. I do a lot of USC S3 on international CDMA SIM programming but ever since it has the 4.3 update and knox bootloader, everything inside is locked. no downgrade or roll-back.
dr.faramroze said:
Straight R530U and US cellular S3 R530U are identical handsets. Once you have ota 4.3, nothing can be done to revive the hidden menu for SIM programming. I do a lot of USC S3 on international CDMA SIM programming but ever since it has the 4.3 update and knox bootloader, everything inside is locked. no downgrade or roll-back.
Click to expand...
Click to collapse
So flashing a lower version to like 4.1.2 is out of the question, am i right? I'm completely screwed with the galaxy s3 since i updated to 4.3?
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
creepyncrawly said:
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
Click to expand...
Click to collapse
Isn't that what a sim unlock is? Correct me if I have it wrong.
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
creepyncrawly said:
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
Click to expand...
Click to collapse
Yes, but that's for 4.1.2 idk if it will work with 4.4.2 I just don't wanna accidentally ruin my phone. And I think you mean LJ2 not MJ2 and thanks that'd be great if you could keep me posted
emeianoite said:
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
Click to expand...
Click to collapse
Were any of them on 4.4.2?
blu422 said:
Were any of them on 4.4.2?
Click to expand...
Click to collapse
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
At one time, there was a free app on XDA called GalaxSim Unlock. For some reason, the developer pulled the free app download, and the only version then available was the paid version on Play. I have a copy of the free one from before it was pulled, and it works on the Captivate and the Galaxy S II, and some other galaxy phones, not sure which ones. So I tried it tonight on my wife's Note 2 which is running Stock NE5 with TWRP recovery and has the MC3 boot loader. However, the unlock failed, saying unable to read nvdata. So it's apparently a no go on this phone.
Bajanman said:
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
Click to expand...
Click to collapse
That only works if the contract the phone was in was not defaulted, and or you are the original owner of the phone.
re: sim unlock
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
jsdad said:
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
Click to expand...
Click to collapse
My sister sell her note 2 to me because she's gonna upgrade to samsung galaxy S5. It was an att and I'm using T-mobile.
I did check the baseband ver and It was i317UCUCNE5 (4.4.2 OTA). the question is it is safe to flash base band ver i317UCALJ2 using ODIN?
Can you do the step by step process and also links of the files and software did you use please? thanks
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
It's a network unlock, so you are free to use any GSM carrier. You can lock your sim card -- then a pin is required for your phone to connect to your carrier. It's the old skool method to stop unauthorized use, from the days before a lock screen pin.
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
trunks10k said:
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
Click to expand...
Click to collapse
Please let me know if it works. mine is galaxy note 2 4.4.2 NE5 baseband and I've done some research and they said that if you upload your firmware thru OTA there is a possibility that it will soft brick you phone due to unknown security reason.
I'm just waiting for conformation from some one that it's safe to flash J2 modem on a NE5 OTA
in the US, if your phone is more than 6 months old and your contract is in good standing you can ask for the unlock code. I don't know if Canada is similar.
I was going to post the same question about unlocking I317 4.4.2, and found this post which is similar to what I'm looking for so just want to add to pump the question.
It's been a while but I have done unlocking for other At&t models (S3, S4) and learned that later versions don't with the option in hidden menu to unlock, and the work around is to downgrade. However with devices that have OTA updates, it's not possible to downgrade the bootloader.
Is this the same for Note 2 I317? If so, any other method available to unlock this device to use it on other GSM networks? (I just bought one and it's on Kitkat 4.4.2 UCUCNE5, and looking for unlock...)
It's only the modem that needs to be flashed. So whatever bootloader you're on doesn't matter.
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
dmrfresh said:
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
Click to expand...
Click to collapse
What bootloader were u on?
Sent from the TermiNOTEr 2! ?
i have an i747m phone on rogers network (locked). it is still on original firmware version, although it is rooted.
i recently flashed lineageos.
since then the sim card is not recognised (no network). i am unsure what the issue IS, but i have been further educating myself for the last four days on this topic and am still unclear on some things. i wonder if you could answer some questions and give a bit of guidance.
here's what i know:
===============
made nandroid backup before upgrading to lineageos
phone worked fine before the update to lineageos
android version was 4.0.4
the bootloader and modem has not to my knowledge been changed since purchase -- i am the original owner.
the phone was rooted shortly after purchase by me
baseband is I747MVLLE8
bootloader is i747MVLALE8
os is now lineageos 14.1-20170828-nightly-d2att
### i can receive calls. phone does not ring, but there is visual notification and i can answer and talk.
### (update) i reinstalled lineageos and now incoming DOES ring. on the screen it says "incoming call via emergency network". i do not see any way to answer the call now, and even after hanging up the initiating call it continues to ring until reboot.
### (update2) i have been able to answer the "incoming call via emergency network" and it seems to connect normally. is this a glitch, or are "incoming emergency calls" a "thing"?
===============
i read that one of the likely reasons is "out of date baseband/modem/bootloader"
here's what i am unsure of:
===============
probable cause of "no sim"
should i upgrade bootloader? if so to what version and how?
should i upgrade modem? if so to what version and how?
anything else that should be updated?
what does "d2att" stand for and represent? is it part of the hardware/model of the phone? e.g. what is the difference between d2att and d2can?
is d2att the correct "thing" for the rogers network in canada for an i747m?
can i use heimdall and the images from sammobile.com to upgrade ONLY the modem and/or bootloader? if so, what files do i use (which one's are which?)?
if i use heimdall to flash the WHOLE sammobile "firmware" what happens? do i need to flash them all incrementally (v4.1, v4.2, v4.3 etc), or can i go from 4.0.4 straight to 4.4.2?
what is the minimum baseband/modem/bootloader that will work with lineageos 14.1 (android 7?)?
what are the drawbacks associated with upgrading the baseband/modem/firmware?
should i flash an older baseband first and try to unlock my sim or is that problematic in other ways?
===============
i am tech savvy and can follow complex instructions. i am not afraid of SOFT bricks as long as there is some way for me to revert. what IS holding me up is the fact that there are no clear directions (that i could find so far) for doing what i am trying to do, no clear indications of what the dangers are (that i could find so far), and (seemingly) conflicting information abounds. i understand (more than ever now) that this is a very complex topic and everything in this realm is unofficial. i would be very grateful if you could bring me up to speed on this topic a bit more, help me to understand things in more depth.
my goal is to update the phone the the newest lineageos (if that is possible and recommended), and to have full functionality. IF lineageos 14.1 is not to my liking, being able to revert to SOMETHING else would be great!
thanks so much!
The phone needs to be running the latest bootloader and modem to run the latest Lineage.
d2att is the moniker for the AT&T s3. The d2can is the Canadian version used by Canadian carriers other than Wind/Freedom, Videotron, and Shaw. The d2lte is the international version of the s3, although the d2att and d2lte ROMs may work on the d2can.
audit13 said:
The phone needs to be running the latest bootloader and modem to run the latest Lineage.
Click to expand...
Click to collapse
ok great to know!
do you know if i can update just the bootloader and modem and if so how? i have the file
I747MVLUFOB3_I747MOYAFOB3_RWC.zip
from sammobile.com (for the i747m rogers) which contains around ten files. which one is the bootloader and which one the modem (or does it work like that?)? there is a post here
ohthehugemanatee <dot> org/blog/2015/04/04/how-and-why-to-update-the-modem-slash-baseband-firmware-on-a-samsung-phone/
that talks about the theory (if not the exact practice for my exact phone) of how to do it. can you verify this would work as demonstrated using heimdall?
is it advised to do any of this with a locked sim? i am on the rogers network and would be flashing files/firmware (presumably) for the rogers network.
audit13 said:
d2att is the moniker for the AT&T s3. The d2can is the Canadian version used by Canadian carriers other than Wind/Freedom, Videotron, and Shaw. The d2lte is the international version of the s3, although the d2att and d2lte ROMs may work on the d2can.
Click to expand...
Click to collapse
since you did not list rogers there does that mean that i would have the d2can then? i used the d2att version of TWRP (as well as lineageos) -- do you think that is going to cause problems?
thanks very much for your reply!
Rogers, Telus, and Bell s3 are the d2can.
You unzip the file from sammobile.com only once to get a tar.md5 file that you flash in the pda/ap slot of Odin. Sim card is not required to be in the phone when flashing.
Using twrp and lineage for the d2att shouldn't be an issue since the att version of the s3 uses the same hardware as the Rogers s3.
audit13 said:
Rogers, Telus, and Bell s3 are the d2can.
You unzip the file from sammobile.com only once to get a tar.md5 file that you flash in the pda/ap slot of Odin. Sim card is not required to be in the phone when flashing.
Using twrp and lineage for the d2att shouldn't be an issue since the att version of the s3 uses the same hardware as the Rogers s3.
Click to expand...
Click to collapse
cool ok.
do you think i can go straight from 4.0.4 firmware to 4.4.2 (latest i think?)? is it recommended?
It should be no problem to flash the 4.4.2 stock rom over the existing 4.0x ROM.
Is the phone network unlocked? If not, flash the stock 4.1.1 ROM and use the free method to network unlock the phone. The unlock will be permanent.
audit13 said:
It should be no problem to flash the 4.4.2 stock rom over the existing 4.0x ROM.
Is the phone network unlocked? If not, flash the stock 4.1.1 ROM and use the free method to network unlock the phone. The unlock will be permanent.
Click to expand...
Click to collapse
cool. couple of questions:
1/ do i need to use a sim from a network other than my own (rogers) in order to complete the free unlock? many of the "free unlock" tutorials mention inserting "the new sim" in order to do the unlock.
2/ will this image (rogers 4.1.1) work for getting me the free unlock or do i have to use a pristine one?
https://forum.xda-developers.com/showthread.php?t=1739426
the reason i ask is that sammobile seems to require a premium account to get that older 4.1.1 image.
cheers!
You don't need a SIM card from another carrier to unlock on 4.1.1 but you need a SIM from another carrier to verify that the phone is unlocked.
Try updato.com for a stock Canadian 4.1.1 rom
https://forum.xda-developers.com/showthread.php?t=2529200
Don't flash beyond 4.1.1 until the phone is sim unlocked.
audit13 said:
You don't need a SIM card from another carrier to unlock on 4.1.1 but you need a SIM from another carrier to verify that the phone is unlocked.
Try updato.com for a stock Canadian 4.1.1 rom
https://forum.xda-developers.com/showthread.php?t=2529200
Don't flash beyond 4.1.1 until the phone is sim unlocked.
Click to expand...
Click to collapse
when i search for "i747m" on updato.com, the only 4.1.1 firmware they list is
GALAXY S III (Canada) SGH-I747M 4.1.1 December 21, 12 Puerto Rico (PCT) I747MUMBLL1
is that one suitable, being "region/carrier = puerto rico" or do i NEED rogers carrier?
Is your phone still locked to Rogers?
audit13 said:
Is your phone still locked to Rogers?
Click to expand...
Click to collapse
i have not tried the unlock yet (because of the carrier/region question) but yes i believe it is locked to rogers.
i guess i don't really understand what the differences are on my phone -- what they are for.
i believe that the i747 is a different hardware than i474m.
but i don't know if d2att is different HARDWARE than d2can for example.
and the "rogers" part, vs "telus" or "sprint" or whatever. i am guessing that that signifies the PROGRAMMING in the OS or perhaps the FIRMWARE as well -- but not the hardware... but i could be wrong.
when i "unlock" the phone from rogers network, when i dial the "special number," do i need a network connection or is that number something internal to the phone (no rogers network (or any other) needed)? in other words, can i "unlock" my rogers locked phone using the non-rogers firmware upgrade 4.1.1 ?
The hardware for the ATT s3 (d2att) and Rogers/Telus/Bell s3 (d2can) is identical except the US version uses different boot loaders and modem from the Canadian version.
The Sprint and Verizon versions of the s3 are CDMA, not GSM like the ATT and Rogers version.
Neither a network connection, SIM card, or SD card is not needed to use the menu method to unlock the phone. You will need a non-Rogers SIM card to test the phone after it is unlocked. Do not upgrade beyond 4.1.1 until the phone is network unlocked. Upgrading beyond stock 4.1.1 will permanently lock you out of the dialler unlock menu and you will have to buy an unlock code if you want to network unlock the phone.
You can use any 4.1.1 stock ROM from Bell, Telus, Koodo, Rogers, or Fido to access the dialler unlock menu.
Use Odin 3.07 and the original Samsung USB cable to flash the ROM in the PDA slot of Odin.
Make sure you have a backup of your data as things can go wrong during any flash process that may cause you to lose your data.
All of the information I have provided is something that I have personally done. I can provide no guarantee that you won't encounter a problem or brick your phone. Proceed at your own risk.
Any updates?
audit13 said:
Any updates?
Click to expand...
Click to collapse
yes i have updates! i finally got around to doing this today and...
i updated to 4.1.1 bell stock that you suggested. i used heimdall to do the flash instead of odin using this guide:
https://forum.xda-developers.com/wiki/Heimdall
other than that i followed your advice to the T
success.
i then did the menu unlock procedure (a few times). i don't know if it worked or not because i am unable to test with a different network sim yet.
i then went to version 4.4.2 from sammobile using heimdall again -- all went well.
i then installed the (for me) non-working lineageos from last week and it now works -- i assume due to the upgraded baseband you suggested. i am able to make and receive calls as normal now.
i then updated to lineageos 14.1 20170904 with gapps nano. and i can report that all is working extremely well.
thank you so much audit13 for working this through with me. i have learned a ton of new stuff, and not a single brick.
thanks again!
That's great news. Thanks for the update.
We're all here to help and learn