hi it have tried too install kitkat on my s4 mini (I9195) using oden, i got the firmware from sammobile. when it gets to the last few bits (hidden) and it fails, it says ODIN: invalid ext4 image on my fone. now its stuck in recovery mode. what can i do it fix this?
*EDIT* i fixed the problem last night, once the firmware failed on the last part, i then ran the modem firmware http://forum.xda-developers.com/showthread.php?t=2545784 on its own. fone then restarted and booted up. have found no problems with it now and it seems too be working excellent
Related
I bought a galaxy Grand duos few days back. It came with Arabic firmware may be so i installed Indian 4.1.2 ROM via odin it worked then a update of around 450 mb came which i installed.Phone worked perfectly.Then few other stability updates came which i installed phone was fine.
Then another update of 198 mb came it was downloaded and installed and after that suddenly in my first reboot phone continuosly flickers showing SAMSUNG GALAXY GRAND DUOS I9082. I cant go to recovery mode but i can go to download mode.
I tried to install many ROm all said Pit file needed.I got a pit file installed with that but everytime it shows repartition failed.
PLZ HELP ME HOW TO GET MY PHONE WORKING.
In download mode model name i9082 and status official is showing but below that emmc firmware [ ] (Blank Box) is showing
Dunno what to do.
I got 4 files downloaded from another forum of csa modem boot pda..One of those was CODE_I9082XXAMAB_784570_REV05_user_low_ship.tar
First time when i was flashing this it showed NAND Error but after that it again startd showing re-partition error.
Someone help me what to do.Is there any other pit file or method to get it back to working state???
My rom was 4..2.2 and mk3 . 198 mb update was for the feb 2014 update
sumitbain7 said:
I bought a galaxy Grand duos few days back. It came with Arabic firmware may be so i installed Indian 4.1.2 ROM via odin it worked then a update of around 450 mb came which i installed.Phone worked perfectly.Then few other stability updates came which i installed phone was fine.
Then another update of 198 mb came it was downloaded and installed and after that suddenly in my first reboot phone continuosly flickers showing SAMSUNG GALAXY GRAND DUOS I9082. I cant go to recovery mode but i can go to download mode.
I tried to install many ROm all said Pit file needed.I got a pit file installed with that but everytime it shows repartition failed.
PLZ HELP ME HOW TO GET MY PHONE WORKING.
In download mode model name i9082 and status official is showing but below that emmc firmware [ ] (Blank Box) is showing
Dunno what to do.
I got 4 files downloaded from another forum of csa modem boot pda..One of those was CODE_I9082XXAMAB_784570_REV05_user_low_ship.tar
First time when i was flashing this it showed NAND Error but after that it again startd showing re-partition error.
Someone help me what to do.Is there any other pit file or method to get it back to working state???
Click to expand...
Click to collapse
you have only one solution bro FLASH STOCK FREMWARE FROM SAMSUNG via Odin its bootlaoder issue
FREMWARE link for arab region (http://terafile.co/435624460935)
good luck
I have a n910A (Note 4 AT&T). I have just got the lollipop update 2 days ago. After updating the sd-card was not working so I tried to factory reset the phone. After doing that the phone get stuck on the Samsung logo and restarting. So I tried to roll back to 4.4 kit kat with odin and the stock rom that I found here. But the phone now cannot recognize the Sim card and it is restarting every 3 minutes. Please any solution!!
I think that happened because I did something wrong with odin. The first time I tried to install the firmware I put the firmware file in the (BL) not (AP) but I didn't click on re-partion.
Deleted, sorry read that wrong
I normally find a way around some android issues but sort of lost this time so iI need some help please!
Tablet is (was?) rooted and running cm12 plus twarp before the issue. It was running fine other than using a lot of battery.
So after replacing a battery my Note 8 N5110 started a boot loop and sometimes TWARP starts but does not work and it gets back to the boot loop!
I tried first re-load TWARP via odin and it passed but it was still in the bootloop so I tried load the stock firmware via Odin and I am getting failed with a
I have attached a picture of Twarp right before it fails, a picture of Odin with a failed attempt to load the stock firmware and the message I get on the Note 8 custom firmware screen.
Thanks in advance!!!
For the record I found a way out, the only thing that worked on my case was initialize the Tab using Samsung KIES.
Awesome software thanks Samsung, it saved my day and now....back to root and CM13 again
Hello glad you got it working. is it hard to replace the battery in these?
Hi everyone,
My canvas a1 (aq4501) was on September security patch (6.0.1) [unrooted but bootloader unlocked], but suddenly some Google Play services stopped working. So I switched off the phone but the problem was not fixed. Ultimately, I tried to clear cache & the wipe partition but it continuously showed up with the error ''failed to mount the recovery image". Now on opening the phone, it was stuck in a bootloop.
So, I tried to flash stock lollipop 5.1 rom by sp flash tool (5.152400- latest version) [I've earlier done this before as my rom got corrupted earlier] by download only mode but even after successfully flashing (ok done appeared), the phone's rom was not overwrited and it was still hanging on 6.0.1(MOB31E). So this time I tried to flash marshmallow 6.0 rom but again the problem remain unchanged (device was still at 6.0.1- MOB31E in recovery mode even if the flash was successful as shown up by SP flash tool).
So now I tried format+download only mode, again the flash was successful but this time not even the OEM logo (micromax logo) appeared and neither did the recovery mode. That means that my device got bricked. So I found this thread of http://forum.xda-developers.com/canvas-a1/help/micromax-android-one-bricked-unable-to-t2999760. and found that by firmware upgrade mode, we can get our phone back. But as shown in one of the comments of that thread, they got an error "failed to get pmt info", I got the same error too. So, I am helpless as I can't do anything. I've not tried stock KitKat rom yet and also ensure you that all my drivers are correct as SP flash tool is working flawlessly on my pc.
Please help me to fix this problem..........Is there any way to fix it using android one toolkit?????
getting the error message "KERNEL REV. CHECK FAIL DEVICE: 12 BINARY: 5 (BOOT)"
can someone help me out here?
got a bricked s20 (G981BXXU5CTL1 H3G)
only able to go into download mode or boot loop
Recovery mode does not open
Tried installing TWRP when this showed up
I tried several times to flash factory firmware
anybody know what the error message means and how I can unbrick my phone?
Edit: nvm I got it
btw. I cant seem to find firmware with my csc: H3G
and my Odin seems to be stuck on super.img when trying to flash AP
please help me out if you can ty