Urgent Help.Please solve my problem the strangest one - Galaxy Grand Duos i9082 Q&A, Help & Troubleshootin

I bought a galaxy Grand duos few days back. It came with Arabic firmware may be so i installed Indian 4.1.2 ROM via odin it worked then a update of around 450 mb came which i installed.Phone worked perfectly.Then few other stability updates came which i installed phone was fine.
Then another update of 198 mb came it was downloaded and installed and after that suddenly in my first reboot phone continuosly flickers showing SAMSUNG GALAXY GRAND DUOS I9082. I cant go to recovery mode but i can go to download mode.
I tried to install many ROm all said Pit file needed.I got a pit file installed with that but everytime it shows repartition failed.
PLZ HELP ME HOW TO GET MY PHONE WORKING.
In download mode model name i9082 and status official is showing but below that emmc firmware [ ] (Blank Box) is showing
Dunno what to do.
I got 4 files downloaded from another forum of csa modem boot pda..One of those was CODE_I9082XXAMAB_784570_REV05_user_low_ship.tar
First time when i was flashing this it showed NAND Error but after that it again startd showing re-partition error.
Someone help me what to do.Is there any other pit file or method to get it back to working state???

My rom was 4..2.2 and mk3 . 198 mb update was for the feb 2014 update

sumitbain7 said:
I bought a galaxy Grand duos few days back. It came with Arabic firmware may be so i installed Indian 4.1.2 ROM via odin it worked then a update of around 450 mb came which i installed.Phone worked perfectly.Then few other stability updates came which i installed phone was fine.
Then another update of 198 mb came it was downloaded and installed and after that suddenly in my first reboot phone continuosly flickers showing SAMSUNG GALAXY GRAND DUOS I9082. I cant go to recovery mode but i can go to download mode.
I tried to install many ROm all said Pit file needed.I got a pit file installed with that but everytime it shows repartition failed.
PLZ HELP ME HOW TO GET MY PHONE WORKING.
In download mode model name i9082 and status official is showing but below that emmc firmware [ ] (Blank Box) is showing
Dunno what to do.
I got 4 files downloaded from another forum of csa modem boot pda..One of those was CODE_I9082XXAMAB_784570_REV05_user_low_ship.tar
First time when i was flashing this it showed NAND Error but after that it again startd showing re-partition error.
Someone help me what to do.Is there any other pit file or method to get it back to working state???
Click to expand...
Click to collapse
you have only one solution bro FLASH STOCK FREMWARE FROM SAMSUNG via Odin its bootlaoder issue
FREMWARE link for arab region (http://terafile.co/435624460935)
good luck

Related

[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn

[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Really?
mrhaley30705 said:
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Click to expand...
Click to collapse
Would that actually work cuz im stuck in the same situation... and i just got my tab today after repairs. and i dont wanna screw it up again cuz of parents so im just gonna give it a try to see if it works
Help
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
If you can get your device back into download mode, you could relay the stock firmware from www.stockbroker.net. Select the file you downloaded under pda in Odin and flash it. Hope this helps. You can try to root again from there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Upgraded to 4.1.1 even after soft-brick !
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Dezzy87 said:
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
Click to expand...
Click to collapse
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
macuruso said:
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
Click to expand...
Click to collapse
can you get into download mode
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
i have the same error (firmware upgrade encountered an issue. please select recovery mode in kies and try again) on my Samsung Galaxy Tab 2 10.1 but i dont have this
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
I cant get my tablet in download or recovery, Kies doesnt recognise my tablet either? what do i do? please if someone has solved it plz plz plz tell me
Also when i plug my tablet into my PC i get "USB device not recognised" how do i fix that too?
akshar102 said:
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Click to expand...
Click to collapse
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
djcnote562 said:
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
Click to expand...
Click to collapse
This is for the S3, flashing it's firmware on the Note 2 won't work. I highly suggest you go on the Note 2 section.
I found a fix for this problem
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Re: [Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try agai
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Sent from my GT-P5113 using xda app-developers app
Download cwm-touch-i717-120414.tar.md5
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
How any pages did you go back to find this thread? It literally has sat, answered and untouched for close to 2 months
it worked
man it worked used the error screen as download mode and it reflashed with even all my settings awesome .... thanks
use one of the $8 dongles. supersimple
cheers
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
You are my hero! Ignore that little girl beneath your post, I'm glad you took the time to post the solution.
Ainol novo 8 discover flashing firmware error
Sir i have ainol novo 8 discover it has a problem that when i install firmware files on my discover with firmware tool there have a problem is data.img file cant install on my tblet software shows WRITE DATA PARTITION FAILED..and u can see screen shot also plzzzz help me what i do.plzz thanks in advance.

[Q] Problem in Note 2 Boot + Firmware installation

Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
suppose trongwi
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
note2nooby said:
You didnt saw this thread ? http://forum.xda-developers.com/showthread.php?t=2154890
check it out.
Click to expand...
Click to collapse
Please it is a request , I need a precise method to overcome this problem ... some files in your suggested link doesnot work especially Hotfile.com
Thank you for reading
where can I download "Recovery Package/ROM"? Hotfile.com is not available anymore
Thank you
removed
simple google search gave me this , try to download!
Edit : i took the link off , because it could harm your phone if you are coming from 4.3 android
Ajmal khan
I faced the same problem few days back...
Start kies on ur laptop ( dont connect ur phone yet )
Choose initialisation option
Enter model number
Enter serial number
Now connect ur phone with pc in download mode
Pls make sure u have high speed net for 2-3 hrs...
Bcuz kies download the full rom as per ur serial number
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
note2nooby said:
Yes do as MAX says , because i suspect you installed 4.3 and now you want to come back to 4.1.2 ,
and i think it will not be so easy as it shows in the post i showed you.
Click to expand...
Click to collapse
No No and Honestly I didnt try that ... I just wanted to freshen my mobile by reinstalling official Firmware 4.1.2 .... oh anyways good news is that I recovered my mobile by following the bellow steps ..
1. Downloaded Official Firmware "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar"
2. Opened Odin
3. and upload the "N7100XXDMB5_N7100OJVDMB1_N7100XXDLK7_HOME.tar" in PHONE section under PDA (Not PDA) & pressed Start
4. The installation went well but with problems in upgrading applications and continual restarting.
5. again opened Odin and this time I uploaded the official Firmware in PDA and installation went well
6. Booting and registeration also went well.
7. Mobile is back on life
But But
Now my colleague has messed with Note 3 and it also gives the same msg as i had in the beginning "firmware upgrade encountered an issue".
Thank you max621 for your kind help, I will try those for Note3 instead.
Thanks for reading.
ajmalkhan360 said:
Dear XDA
I am facing a very serious problem with my Note 2 (Samsung) since noon today . Literary, I tried to reinstall (Jellybean 4.1.2) Firmware and unfortunately, during the process I had my PC off, which resulted in the following message;
"Firmware encountered an upgrade issue. Please Select Recovery mode in Kies and try again."
I tried Kies later, but It was not connecting , then reading few help blogs, I tried to install in mobile (cwm6-root-note2- with recovery zip inside) with the help of Odin, which has stopped the Firmware encountered message and replaced it with "Samsung Note II" logo and further its says updating package and restarts continually.
I also tried to install again official 4.1.2 Firmware through Odin after (Vol Down+Centre+Power - and Up) but Failed.
I dont know what to do , please help me out from this issue . it is killing me.
Thank you
Click to expand...
Click to collapse
Try to Remove the battery and try to access the RECOVERY
the FIRMWARE was damaged.
I wish that you have nandroid backups there.
I already experienced that and just rebooted to recovery and restoring by nandroid.
Glad to see your phone is back up and running ...
next time you want refresh your phone , just do simple factory reset!
Glad to hear that u recovrr ur phone.. but for note3 u must install kies3 first....

stuck in recovery mode: kitkat *fixed*

hi it have tried too install kitkat on my s4 mini (I9195) using oden, i got the firmware from sammobile. when it gets to the last few bits (hidden) and it fails, it says ODIN: invalid ext4 image on my fone. now its stuck in recovery mode. what can i do it fix this?
*EDIT* i fixed the problem last night, once the firmware failed on the last part, i then ran the modem firmware http://forum.xda-developers.com/showthread.php?t=2545784 on its own. fone then restarted and booted up. have found no problems with it now and it seems too be working excellent

[Q] cant update s2 sgh t989

I tried to press software update but den it says no firmware idk y.im running on 4.0.3 , and im ttryin 2 update via samsung kies and im downloading the update and its stuck on 100% but my phone goes into odin mode and says do not yurn of target after a few minutes samsung kies says errer device got disconted or sumthing i forgot and i coudnt download it. Can any 1 help me fix this its about my fourth time trying lol thnx
KURDKiNG said:
I tried to press software update but den it says no firmware idk y.im running on 4.0.3 , and im ttryin 2 update via samsung kies and im downloading the update and its stuck on 100% but my phone goes into odin mode and says do not yurn of target after a few minutes samsung kies says errer device got disconted or sumthing i forgot and i coudnt download it. Can any 1 help me fix this its about my fourth time trying lol thnx
Click to expand...
Click to collapse
I'm not 100% clear on this. Have you tried booting into download mode and installing via odin? From what it seems, that seems to be your best option.
Have you tried a different USB cable or USB port on your PC?
Is your device stock and unrooted?
And yes, Odin is much easier. Have to find the firmware though. Try googling it or sammobile. Com.
And if you use Odin, end all processes of kies first. ?

SM T520 Odin Stock ROM flash error

Hi All. The problem is I downloaded from live.samsung-updates Stock ROM T520XXUAOB1 for Samsung Galaxy Tab Pro 10.1 ( SM T520 ) . Tried several times to flash through Odin and always get error at the end when flashing "Hidden" . Tried different cables and PCs. The same result. After getting error in Odin when I try to restart I get message on Tab screen to connect to Kies. I reenter to Download mod and flash with Odin TWRP Recovery and after that Tab starts normally. But At the main screen I start getting keyboard error. I understand that I can install any other keyboard but I want to know what is the problem? Is there any solution to flash stock rom without any problem and any eror? And is there someone who gets the same error or I am only one?
Thanks!
Who managed to update Tab Pro with Odin to T520XXUAOB1? Only me facing this issue or someone else too?
Me too ! I tried AUT and BTU same error ! Any idea ?
Me too! I was facing the same issue. I went to Samsung Kies and did the firmware update from here by typing in my model number which you have to type as SM-T520 (in caps) and then putting in your serial number. It should automatically start downloading the update and then install it. Hope this helps!
Not working for me.

Categories

Resources