ATT Note 2 4.4.2
Downloaded Electron Team DN 3 v5, nice looking rom, however, I have no phone service. When I go into settings to networks, it is asking for a SIM card.
Check to see if you need to flash a modem. What baseband does your phone show?
rangercaptain said:
Check to see if you need to flash a modem. What baseband does your phone show?
Click to expand...
Click to collapse
baseband version "unknown"
also getting a ton of "unfortunately, calendar storage has stopped...etc
Sounds like you need to do correct wipe procedures and reflash the rom. You also need to flash a modem.
rangercaptain said:
Sounds like you need to do correct wipe procedures and reflash the rom. You also need to flash a modem.
Click to expand...
Click to collapse
Trouble is, I don't know which modem to flash. I just tried flashing one, but didn't work.
For some reason this is the only rom when i flash, that kills the modem.
Related
Hello All,
I have been using Illusion 4.2.2 and want to go to 4.3.
I have been facing the following issues -
1) After upgrading to the latest cwm (6.0.3.8), I tried flashing PA 4.3. With a clean wipe and format system, it gave me a status 7 error (installation aborted).
One of XDA members redirected me to this - http://forum.xda-developers.com/showthread.php?t=2321310. I followed this and following is the screenshot of what I have after upgrading the bootloader : (Below jpg which says "Just after upgrading bootloader)
2) I could now flash the rom but when I rebooted after flashing , I don't have root access and neither do I see any att network / data . Following are the screenshots -
(Just after flashing 4.3 Page 1/2 and No root access after flashing 4.3).
ND
_ND_ said:
Hello All,
I have been using Illusion 4.2.2 and want to go to 4.3.
I have been facing the following issues -
1) After upgrading to the latest cwm (6.0.3.8), I tried flashing PA 4.3. With a clean wipe and format system, it gave me a status 7 error (installation aborted).
One of XDA members redirected me to this - http://forum.xda-developers.com/showthread.php?t=2321310. I followed this and following is the screenshot of what I have after upgrading the bootloader : (Below jpg which says "Just after upgrading bootloader)
2) I could now flash the rom but when I rebooted after flashing , I don't have root access and neither do I see any att network / data . Following are the screenshots -
(Just after flashing 4.3 Page 1/2 and No root access after flashing 4.3).
ND
Click to expand...
Click to collapse
Some roms you have to turn on root access; should be in the install post. Are you running the right rom for your device?
thepoetlives89 said:
Some roms you have to turn on root access; should be in the install post. Are you running the right rom for your device?
Click to expand...
Click to collapse
I eliminated that possibility because the same thing happened with two different roms (PA 4.3 and Illusion 4.3). I am on ATT and this phone is a ATT phone , and I am flashing all roms within this thread
_ND_ said:
I eliminated that possibility because the same thing happened with two different roms (PA 4.3 and Illusion 4.3). I am on ATT and this phone is a ATT phone , and I am flashing all roms within this thread
Click to expand...
Click to collapse
I know with illusion you have to ::Settings -> Developer options -> Root access to apps and/or adb. to get root access. Where are you getting basebands from? The latest is I747UCDMG2 but I747UCDLK3 should work too. Get them from HERE
thepoetlives89 said:
I know with illusion you have to ::Settings -> Developer options -> Root access to apps and/or adb. to get root access. Where are you getting basebands from? The latest is I747UCDMG2 but I747UCDLK3 should work too. Get them from HERE
Click to expand...
Click to collapse
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
_ND_ said:
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
Click to expand...
Click to collapse
some more research told me that I have lost my imei number. I remember taking a backup of my efs folder the first time I rooted my phone a year back. Can anyone help me restore my network using that backed up folder ?
_ND_ said:
I flashed the Illusion 4.3 again and then flashed baseband using the this link (through ODIN).. I still see an unknown baseband in the about and no mobile network (image attached)
The root access got sorted out , thought. thank you !
Click to expand...
Click to collapse
Baseband is Here. I would suggest MG2 baseband as it is more compatible with 4.3 than older than LK3. Get it from the link i just gave you and follow instructions on the page. Only use odin for reverting back to STOCK.
thepoetlives89 said:
Baseband is Here. I would suggest MG2 baseband as it is more compatible with 4.3 than older than LK3. Get it from the link i just gave you. ^^ and flash through recovery. Only use odin for reverting back to STOCK.
Click to expand...
Click to collapse
I tried the MG2 but the baseband still shows up as Unknown in About
_ND_ said:
I tried the MG2 but the baseband still shows up as Unknown in About
Click to expand...
Click to collapse
Huh thats weird. The only thing i can think of is something is wrong with the rom or you are flashing a non d2att rom.
thepoetlives89 said:
Huh thats weird. The only thing i can think of is something is wrong with the rom or you are flashing a non d2att rom.
Click to expand...
Click to collapse
I suspected that but since a lot of people are already using that rom and I made sure I am downloading d2att , those things are eliminated.
I am thinking the 4.3 flashing erased my previous efs folder and that is why it cannot find my imei number anymore - resulting in no network.
_ND_ said:
I suspected that but since a lot of people are already using that rom and I made sure I am downloading d2att , those things are eliminated.
I am thinking the 4.3 flashing erased my previous efs folder and that is why it cannot find my imei number anymore - resulting in no network.
Click to expand...
Click to collapse
When you get imei back i would suggest a nvbackup to make sure you keep a good backup of your imei.
thepoetlives89 said:
When you get imei back i would suggest a nvbackup to make sure you keep a good backup of your imei.
Click to expand...
Click to collapse
I had a nvbackup but since I flashed a different of baseband , I was not able to recover.
Anyways, I flashed stock through odin and looks like I have my network back.
Any recommendation of which 4.3 rom will not cause this again ? Anyone ?
try updating roms from ics up to 4.3and update modem and bootloader.
Well I flashed the MJB and now I do not have any data signal besides WiFi, not sure what steps I need to take now to get it back.
I am running current CM11 nightly..
So Please Help..
pkp190 said:
Well I flashed the MJB and now I do not have any data signal besides WiFi, not sure what steps I need to take now to get it back.
I am running current CM11 nightly..
So Please Help..
Click to expand...
Click to collapse
First of all, you're in the wrong forum. Secondly, if you still have WiFi, verify your apn. If that is correct, download a different modem for your device and flash. Make sure to clear caches and dalvik.
unknownyello said:
First of all, you're in the wrong forum. Secondly, if you still have WiFi, verify your apn. If that is correct, download a different modem for your device and flash. Make sure to clear caches and dalvik.
Click to expand...
Click to collapse
sorry about being in the wrong forum, was not paying attention while searching for solutions. I have finally got things work after flashing both the bootloader and the modem on matching version. either way up and running again.
So after flashing a ROM that was from before 4.4.2, I had been unable to restore it to anything I had before. I thought I had made a backup but I guess I accidentally erased my SD card in CWM. So now I'm stuck with recovery and download mode. Using ODIN I've tried flashing a 4.3 stock ROM but it didn't work and I've been unable to find a current ROM that I can use in ODIN or find a way to push a zipped rom through to my internal SD card while in download/recovery. Can anyone help me here? I don't even need it to be on stock I just need a way to get my phone up and running again. I've been working on this all night and still havent been able to find what I need.
The simplest method may be to get an external SD card, copy a custom ROM to the card, boot into download mode, flash a custom recovery via Odin (I highly recommend Philz Touch), reboot into recovery, and flash a custom ROM from your external SD card.
1272
audit13 said:
The simplest method may be to get an external SD card, copy a custom ROM to the card, boot into download mode, flash a custom recovery via Odin (I highly recommend Philz Touch), reboot into recovery, and flash a custom ROM from your external SD card.
Click to expand...
Click to collapse
I got a ROM to work, but now I have no network access. Wi-Fi works okay though. When I hit Mobile Networks in Settings it says "Insert SIM card to access network services." I read a little about this and I think I have to flash the radio, but I'm not able to find one. Maybe someone could provide a link? And I just flash that in ODIN also, right?
The modem needs to match the bootloader. What bootloader is on your phone? Does your phone display the correct imei?
audit13 said:
The modem needs to match the bootloader. What bootloader is on your phone? Does your phone display the correct imei?
Click to expand...
Click to collapse
How do I know what bootloader its on? My IMEI says unknown, I'm on build number JSS15J.I747UCUEMJNB; Baseband version unknown also, I'm still looking for a modem to flash but i dont really know which one i need
dishoffice said:
How do I know what bootloader its on? My IMEI says unknown, I'm on build number JSS15J.I747UCUEMJNB; Baseband version unknown also, I'm still looking for a modem to flash but i dont really know which one i need
Click to expand...
Click to collapse
I flashed a modem matching the MJB firmware. Still nothing. Ive been reading about maybe it needs a different kernel, or something to do with the EFB so Ive thought about using EFB Professional to wipe the stats.... I havent even tried doing a fresh install through KIES but im wary to mess it up again
Install terminal emulator from the play store and enter this:
getprop ro.bootloader
This will tell you your base firmware/bootloader version. Your modem will need to match this.
DocHoliday77 said:
Install terminal emulator from the play store and enter this:
getprop ro.bootloader
This will tell you your base firmware/bootloader version. Your modem will need to match this.
Click to expand...
Click to collapse
ok my bootloader is NE4 so do i need a 4.4 ROM or i can install the NE4 modem on a 4.3 ROM?
dishoffice said:
How do I know what bootloader its on? My IMEI says unknown, I'm on build number JSS15J.I747UCUEMJNB; Baseband version unknown also, I'm still looking for a modem to flash but i dont really know which one i need
Click to expand...
Click to collapse
After flashing the modem, does the imei appear?
You need the NE4 modem no matter what you run. Nothing else will work.
If you use a 4.3 rom you will need the MJ2 or kt747 kernel though.
I've updated to the new bootloader and modem which resulted in losing my IMEI. I can't seem to get QPST working because the dial codes don't work on synergies for some reason. Does anyone know how to get QPST working on the UCUFNE4? If so, what rom is it working on?
Thanks in advanced!
What is the baseband showing on your phone? Does it match your bootloader?
audit13 said:
What is the baseband showing on your phone? Does it match your bootloader?
Click to expand...
Click to collapse
Yes it does
I am not sure but nvwriter may help you inject the imei.
audit13 said:
I am not sure but nvwriter may help you inject the imei.
Click to expand...
Click to collapse
I think it would too if the codes would work:
2) Dial *#7284# and select "Qualcomm USB Settings" then check "RMNET + DM + MODEM".
The above code does nothing on synergy rom, and I can't odin back to stock since I am on the updated bootloader.
What about flashing a Samsung-based custom ROM in recovery?
audit13 said:
What about flashing a Samsung-based custom ROM in recovery?
Click to expand...
Click to collapse
Synergy is a TW rom, I will try another.
I think you need a rom with a stock Samsung dialler.
audit13 said:
I think you need a rom with a stock Samsung dialler.
Click to expand...
Click to collapse
Thats a step closer, it will bring up a menu now, but not corresponding to the guide. It says "Service" at the top and gives me the option to switch between MTP or MODEM. I tried switching to MODEM but QPST still won't detect it.
reidandkat said:
thats a step closer, it will bring up a menu now, but not corresponding to the guide. It says "service" at the top and gives me the option to switch between mtp or modem. I tried switching to modem but qpst still won't detect it.
Click to expand...
Click to collapse
i fixed it!!! Thanks!
How did you fix it? Post your solution as it may help other XDA members with a similar issue.
Hello guys!
I have a problem with my wife's Note II (should be 7100).
Starting from a stock 4.4.2 I tried installing MIUI 8 through PhilzTouch. Everything went fine, I also installed Open Gapps but I had lost the IMEI. The phone didn't recognize the sim at all (INSERT SIM).
So I tried to restore the working EFS partition (of the 4.4.2) but still the IMEI was corrupted.
I had to restore the whole ROM backup to get the phone working again.
Then i tried with RR 7.1 but I had the same problem.
Basically it seems that everything i flash make me lose the IMEI :|
Any suggestions? Thanks!
The phone was running the latest bootloader and modem before flashing a custom ROM? I also recommend using TWRP to flash, not CWM or Philz.
audit13 said:
The phone was running the latest bootloader and modem before flashing a custom ROM? I also recommend using TWRP to flash, not CWM or Philz.
Click to expand...
Click to collapse
Thanks for the reply!
I'm not sure that the Samsung firmware the phone was running was the latest. Didn't think it could make any difference :/
Can you pinpoint me to the correct files?
Oh and will try with TWRP as you told
The latest n7100 firmware is here: https://www.sammobile.com/firmwares/database/GT-N7100/
To find out about the phone's bootloader and modem, you can install the Samsung Phone Info app from the Play Store.
audit13 said:
The latest n7100 firmware is here: https://www.sammobile.com/firmwares/database/GT-N7100/
To find out about the phone's bootloader and modem, you can install the Samsung Phone Info app from the Play Store.
Click to expand...
Click to collapse
Thanks, downloading now.
It's terribly slow, is there any other mirror?
Try this: http://samsung-updates.com/
audit13 said:
Try this: http://samsung-updates.com/
Click to expand...
Click to collapse
Even worse
Update:
Installed the latest n7100 firmware then flashed MIUI 8 through TWRP... Still unknown baseband and no IMEI
Tried to restore EFS and MODEM but no luck.
Same for RR 7.1.1
I'm trying Eclipse now sigh
UPDATE 2:
Eclipse working good at least!
Maybe it's just a bug in MIUI? I'm not sure as I don't have a note 2 to test.
audit13 said:
Maybe it's just a bug in MIUI? I'm not sure as I don't have a note 2 to test.
Click to expand...
Click to collapse
I don't think so, cause I'm having the same problem on RR 7.1 :/
Maybe you need to flash a different kernel? Anyone else in the RR thread mention this issue?