Develop Bugs

[Q] bricked -i747.

i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this

ghjsdf9 said:
i tried to upgrade my s3 i accidentally falshed with correpted file('i renamed the file .mb5 to .tar) it stuck and showing that needed to connect kies
.. and kies not detecting my device and it wont boot into recovery mode but after search i rooted again through cf auto root and then it can enter into recovery mode is it bricked/not what happend to my device currently it can enter into both recovery &download mode ......
pls help me with this
Click to expand...
Click to collapse
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?

Larry2999 said:
Welcome to the forum! Your phone's hardly bricked if you can get to download and recovery modes. Flashing the correct (stock) firmware should get you back to working conditions. What Android version were you on prior to it being stuck and what were you trying to upgrade to?
Click to expand...
Click to collapse
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions

ghjsdf9 said:
THANKS FOR WELCOME PARTY:
and for the rly tooo.
i can get into both download mode as well as recovery mode ..... i'm not clear with my phones model-in odin mode it showing "PRODUCT NAME:-SGH-I747M" on starting it is running 4.1.2 (zsemc1) version i am not clear with baseband etc.
and i'm not clear with supported varient versions when i flashed with different version in odin mode it showing differnt causes for different version
ex: "unsupported dev type","secure check fail sb12",securechech fail aboot" for three different versions
Click to expand...
Click to collapse
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.

Larry2999 said:
i747M is for the Canadian and Mexican variants. If you were on stock 4.1.2, you should be able to Odin back to stock 4.1.1 or upgrade to 4.3 via custom recovery. You can go to the thread below to check the correct stock image for your phone based on carrier. Make sure you use the correct image as flashing the wrong version could hard brick your phone. Download to your PC and then flash. If you select the 4.3 version, you would need to flash custom recovery to your phone via Odin, save the file to a (micro) SD card and then flash via custom recovery.
http://forum.xda-developers.com/showthread.php?t=1739426
Let me know if this works for you.
Click to expand...
Click to collapse
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]

ghjsdf9 said:
i'm Asian it worked for local networks before bricked so i'm not clear with choosing in versions... ["help me with it"]
Click to expand...
Click to collapse
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.

Larry2999 said:
If we are going to flash a stock ROM, we would need to flash the correct version as there is risk of a worse brick if we flash the wrong one. When the phone was working normally, the old network would probably be showing during booting. If you got it from abroad, please check if you can get the information from the previous owner. If there is no way of telling the correct firmware, then you can flash custom recovery to the phone and try flashing a custom ROM via recovery. It's always tidier flashing a custom ROM to a device functioning normally but, unless we can be sure of the correct stock firmware to flash, your options may be limited.
Click to expand...
Click to collapse
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......

ghjsdf9 said:
and finally i found the correct version and when tried to flash through odin i came across this problem
it stuck at "initialization..." [more than hour..] help pls......
Click to expand...
Click to collapse
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.

Larry2999 said:
Sounds like a partition problem. Please let me know the firmware version you are trying to flash.
Click to expand...
Click to collapse
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????

ghjsdf9 said:
it's version 4.3(I747MVLUEND2_I747MOYBEND2_SPC) at sammobiles.com............
and once "i tried with pit file by marking re partition" will this effect ??????????????
Click to expand...
Click to collapse
I've seen this particular problem reported several times and it's always been a problem with the pit file. Flashing a complete stock system should fix all partition problems though. If the stock file you are using is an Odin flashable file, you may try using Odin 3.09. Otherwise, I'd suggest you find a recovery flashable image and flash via (custom) recovery.

BRICKED... help?

Hey all, I need some help. I bricked my phone, and I can only get into download mode and recovery. Flashing through odin fails each time, and so does flashing through recovery. Gives me a status 7 error. Ive made sure I'm downloading all the proper files, but Im stumped here. My phone also isnt recognized in Kies. Ive uninstalled and reinstalled the drivers multiple times now. Im too nervous to go to an AT&T store because theyll see I voided my warranty from the recovery (using philz recovery).
Anyone got any clue on what Im doing wrong? Any help would be much appreciated.

Syst3m Deadlock said:
Hey all, I need some help. I bricked my phone, and I can only get into download mode and recovery. Flashing through odin fails each time, and so does flashing through recovery. Gives me a status 7 error. Ive made sure I'm downloading all the proper files, but Im stumped here. My phone also isnt recognized in Kies. Ive uninstalled and reinstalled the drivers multiple times now. Im too nervous to go to an AT&T store because theyll see I voided my warranty from the recovery (using philz recovery).
Anyone got any clue on what Im doing wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
EDIT: In your sig, it says you have an S2? this is the S3 section.
What happened exactly to soft-brick?
The software you're flashing with Odin might not be good, try another one. Also, since you can get in recovery, you can try clean flashing the ROM you had running previous to the brick.

BWolf56 said:
EDIT: In your sig, it says you have an S2? this is the S3 section.
What happened exactly to soft-brick?
The software you're flashing with Odin might not be good, try another one. Also, since you can get in recovery, you can try clean flashing the ROM you had running previous to the brick.
Click to expand...
Click to collapse
I have an S3 now, just havent updated my sig.
And I was trying to root. I was on the latest stock 4.4.2 and flashed the wrong file by mistake. Forgot what it was. So now I cant flash any files in recovery or odin. It just fails each and every time. I know all these files cant be bad
So root wasnt successful and now I cant even revert back to stock

Kies interferes with odin. Uninstall it from your computer and try odin again.

DocHoliday77 said:
Kies interferes with odin. Uninstall it from your computer and try odin again.
Click to expand...
Click to collapse
Still didnt work. Odin let me install a recovery file, but it just wont let me install files to restore back to stock. Same with recovery, I'm still getting the status 7 error. It doesnt make any sense. Ive downloaded and redownloaded from different places, so I highly doubt that all these files are bad

Are you running the latest Philz? Sometimes, the status 7 error occurs with an outdated recovery. Have you tried flashing a custom ROM with TWRP?

audit13 said:
Are you running the latest Philz? Sometimes, the status 7 error occurs with an outdated recovery. Have you tried flashing a custom ROM with TWRP?
Click to expand...
Click to collapse
I'm running 6.0.5 - no I haven't tried TWRP

What rom were you running before? What do you want to be running now?
And what is your current firmware/bootloader version? Not sure about philz recovery, but status 7 errors usually occur when you dont have the required firmware build.
Also, at least for the T999, cm roms updater-scripts are outdated. So if we have the newest available, it still gives the status 7 errors because the new builds haven't been added. Just thought I'd mention this in case you're updated to the new kk firmware and are trying to flash a cm rom.

DocHoliday77 said:
What rom were you running before? What do you want to be running now?
And what is your current firmware/bootloader version? Not sure about philz recovery, but status 7 errors usually occur when you dont have the required firmware build.
Also, at least for the T999, cm roms updater-scripts are outdated. So if we have the newest available, it still gives the status 7 errors because the new builds haven't been added. Just thought I'd mention this in case you're updated to the new kk firmware and are trying to flash a cm rom.
Click to expand...
Click to collapse
I was running official 4.4 unrooted. I'm trying to install Likewise S5.

Install terminal emulator from the play store and enter this:
getprop ro.bootloader
If it returns I747UCUEMJB you should be ok to flash likewise and something else is preventing it. If its anyway but that, you probably need to update your base firmware/bootloaders first.
If you're still unable to boot anything, the build should be shown on the Download Mode screen. You can probably reflash your previous rom and boot to that for right now though.

I was able to get a custom ROM installed, but now I have no reception. Im guessing the bootloader needs to be updated. So I tried updating it via odin. That failed. I also tried flashing it in recovery and still got a status 7 error. Im at my whits end here

You probably need to flash your modem. Run the Terminal Emulator command I posted before, and if it returns I747UCUEMJB, flash the MJB modem. If it returns anything else, flash the modem that matches, but let us know first just to be on the safe side.

DocHoliday77 said:
You probably need to flash your modem. Run the Terminal Emulator command I posted before, and if it returns I747UCUEMJB, flash the MJB modem. If it returns anything else, flash the modem that matches, but let us know first just to be on the safe side.
Click to expand...
Click to collapse
Terminal Emulator tells me my bootloader is 1747UCUFNE4

Syst3m Deadlock said:
Terminal Emulator tells me my bootloader is 1747UCUFNE4
Click to expand...
Click to collapse
So yeah, you need the 1747UCUFNE4 baseband. Look in Settings/About Phone to know which one you have before going and flashing it.

BWolf56 said:
So yeah, you need the 1747UCUFNE4 baseband. Look in Settings/About Phone to know which one you have before going and flashing it.
Click to expand...
Click to collapse
I cant seem to find the 1747UCUFNE4 baseband,

Syst3m Deadlock said:
I cant seem to find the 1747UCUFNE4 baseband,
Click to expand...
Click to collapse
Did you check which one you have atm?
And here, from Doc http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4

BWolf56 said:
Did you check which one you have atm?
And here, from Doc http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
Click to expand...
Click to collapse
Thanks a bunch, it worked!!!

DN 3 v5 doesn't recognize SIM card

ATT Note 2 4.4.2
Downloaded Electron Team DN 3 v5, nice looking rom, however, I have no phone service. When I go into settings to networks, it is asking for a SIM card.

Check to see if you need to flash a modem. What baseband does your phone show?

rangercaptain said:
Check to see if you need to flash a modem. What baseband does your phone show?
Click to expand...
Click to collapse
baseband version "unknown"
also getting a ton of "unfortunately, calendar storage has stopped...etc

Sounds like you need to do correct wipe procedures and reflash the rom. You also need to flash a modem.

rangercaptain said:
Sounds like you need to do correct wipe procedures and reflash the rom. You also need to flash a modem.
Click to expand...
Click to collapse
Trouble is, I don't know which modem to flash. I just tried flashing one, but didn't work.
For some reason this is the only rom when i flash, that kills the modem.

Tried Kies Recovery - Firmware error!

SGH-I747 (non rooted)
4.4.2 KitKat OTA
I have read a ton of the (un-brick) post on the forums, but they are all rooted phones, and the problem is usually because people tried to install the wrong ROM, but this phone is not rooted.
After OTA update, the phone was fine for a while (wife's). Then is started to reboot randomly. Did factory reset, and still had the same problem.
So I picked up an S5 for my wife and put her S3 in a box. Yesterday i tried to fix the S3 with Kies, tried firmware recovery, failed (Firmware upgrade encountered an issue).
Can get to download mode but that is it. Tried Odin, back to stock file (fail auth), so im guessing because i was trying to flash older ROM, looked for new (KK) ROMs but they are not Odin friendly, then read something about bootloader and 4.4.2 will not work, so i gave up after that.
Kies, emergency recovery will not work, fails every time, so what are my options?
thanks in advance.
Semper-Fidelis

I suggest you flash the latest version of Philz Touch for the d2lte in Odin from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Copy a the latest cm10.2 ROM to your sd card.
Boot into recovery and flash CM10.2. Install the Samsung Phone Info App from the Play Store and confirm the installed bootloader and modem.
Alternatively, you could flash TWRP as your recovery, boot into TWRP, open a terminal windows, and type getprop ro.bootloader to get the bootloader version.

audit13 said:
I suggest you flash the latest version of Philz Touch for the d2lte in Odin from here: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Copy a the latest cm10.2 ROM to your sd card.
Boot into recovery and flash CM10.2. Install the Samsung Phone Info App from the Play Store and confirm the installed bootloader and modem.
Alternatively, you could flash TWRP as your recovery, boot into TWRP, open a terminal windows, and type getprop ro.bootloader to get the bootloader version.
Click to expand...
Click to collapse
Thanks! will try that tonight.
Really appreciate your response!
Semper Fidelis

Any luck?

audit13 said:
Any luck?
Click to expand...
Click to collapse
Sorry, wife had other plans. Will give a try tonight and i will post back.
thanks again.

audit13 said:
Any luck?
Click to expand...
Click to collapse
Success!
Thanks a lot. Had to use a different phone to load rom onto SD card, usb device would not recognize. no big deal. everything else went without issue. Thanks again!
Semper Fidelis

Need help getting sim card to be recognized after flashing cm13, Thanks!

I have spent the past 2 days trying to get a new cfw installed on my phone that didnt have many bugs. I settled with the cyanogenmod13 and read that it was good for a daily driver. At first i installed the wrong gapps and would make the keyboard crash, but now that i figured that out i need help with getting the rom to recognize the sim card. I tryed reflashing with twrp 2.8.6.0 because i read that it would flash the modem correctly, but still no luck. i'm fairly new to flashing and have only done it 3 times in the past. So now i made an account here to ask for help.
Thanks in advance to all the help i get here.

Is the phone running the latest bootloader and modem? You can compare the versions in the phone to sammobile.com.

audit13 said:
Is the phone running the latest bootloader and modem? You can compare the versions in the phone to sammobile.com.
Click to expand...
Click to collapse
Thanks for your rely, Im not 100% sure what you mean by modem as im fairly new to this whole business. I will go to the website to see what i can find. Where can i see that information about the modem i am currently running?

I recommend matching the bootloader and modem version to each other.
You can download the Samsung Phone Info app from the Play Store to learn about the phone.

audit13 said:
I recommend matching the bootloader and modem version to each other.
You can download the Samsung Phone Info app from the Play Store to learn about the phone.
Click to expand...
Click to collapse
Ok I did some research and learned that the modem is the baseband number that shows in the about phone section. This is currently unknown or my guess non existant and that is why the phone says that the sim card is not inserted.
I also learned that i can use ODIN to flash the modem/baseband directly without the need to reflash the whole rom.
I dont know where to find the file online for the modem that matches the rom. I have spent a while looking around and have seen older posts of people saying that they have experienced the same issues after flashing cm13 on n9005 Note 3.
Here is what i am running on my phone:
- Cyanogenmod Version: 13-20151031-UNOFFICIAL-hlte (maybe there is a newer version to this somewhere that has this issue fixed)
- Baseband: Unknown
- Kernal Version: [email protected] #5
- Build Number: 1
-hlte-userdebug 6.0 MRA58K 2127f69904 test-keys
What do you think? And thanks for you help so far. :good:

The simplesting may be this: update TWRP to the latest version. You can flash the img file from TWRP.
Once TWRP has been updated, create a nandroid backup of the existing ROM.
Download the latest ROM from sammobile.com and flash the whole ROM. This is the simplest and safest option IMHO.
After flashing the stock ROM and making sure the sim is recognized and IMEI is correct, use Odin to flash the latest tar version of TWRP , boot into TWRP, restore backup, test your sim.

audit13 said:
The simplesting may be this: update TWRP to the latest version. You can flash the img file from TWRP.
Once TWRP has been updated, create a nandroid backup of the existing ROM.
Download the latest ROM from sammobile.com and flash the whole ROM. This is the simplest and safest option IMHO.
After flashing the stock ROM and making sure the sim is recognized and IMEI is correct, use Odin to flash the latest tar version of TWRP , boot into TWRP, restore backup, test your sim.
Click to expand...
Click to collapse
Ok I will give it a go and let you know what Happens, it will take a while because Here in Ecuador i Have very slow internet. I have to leave the files downloading over night.
Thanks for you help

Wouldnt I be able to flash the modem with odin as long as it matches the phone model? or will that cause problems?

Good luck. I hope it works for your phone.

audit13 said:
The simplesting may be this: update TWRP to the latest version. You can flash the img file from TWRP.
Once TWRP has been updated, create a nandroid backup of the existing ROM.
Download the latest ROM from sammobile.com and flash the whole ROM. This is the simplest and safest option IMHO.
After flashing the stock ROM and making sure the sim is recognized and IMEI is correct, use Odin to flash the latest tar version of TWRP , boot into TWRP, restore backup, test your sim.
Click to expand...
Click to collapse
Tempestelf2 said:
Ok I will give it a go and let you know what Happens, it will take a while because Here in Ecuador i Have very slow internet. I have to leave the files downloading over night.
Thanks for you help
Click to expand...
Click to collapse
Updating to the latest version of TWRP is a bad idea. If you update to version 3.0+ you can't install ROM's that use the AROMA installer. The newer versions of TWRP do not support it. The best version I've found is 2.7.8.0 to be able to handle any flashing.

The biggest problem is the sim card in my opinion.

audit13 said:
The biggest problem is the sim card in my opinion.
Click to expand...
Click to collapse
The sim card works fine in Ecuador, I have used it before flashing to cm13. I found the website of the ones who made the build and noticed that the version that I have downloaded is 1.33 from Oct 31, 2015 and that their latest updates on the channel log is version 12. I will download and flash latest build and she if the issue is fixed.

I was referring to the card bot being recognized in CM, not on a stock ROM. Thanks.