Hi
I received my LG g3 d855 version today (european version).i updated to latest software immediately and i noticed after that i cannot use 3g or gprs.i enabled data and data roaming.what's wrong
Any ideas?
Did a factory reset but still not fixed
I'm having a similar problem. I also recevived my D855 yesterday, did three software updates. Everything was fine.
Today I tried the different network types.
First it was 2g/3g/4g automatic. The I changed to 2g/3g and then to 2g only. I couldn't get a data connection with 2g and 3g. I changed back to 2g/3g/4g automatic, but it won't connect to 4g and still no data connection. What can I do?
Related
Hi,
I installed Santod's GPE 4.4.2 ROM, and I'm wondering if anyone has any experience with the GPE ROM and the Verizon 3G Network Extender.
On Bonestock 2.0.2, the phone connects to the Network Extender via voice and data (1x and 3G - unpredictably). If I am on wifi and turn off the wifi, the phone will fall back fairly quickly onto the 3G or 1x data from the extender.
What I have found so far on the GPE 4.4.2 ROM is that the phone will appear to not connect to the Network Extender's data (voice is fine). The "mobile network" status is "disconnected" and it does not appear to be trying to reconnect to the data network - either 3G via the NE or weak LTE (unlike Bonestock). If I shut off the network extender and walk outside the mobile network will eventually reconnect to LTE once wifi is toggled off.
I've tried both the radios (1.12.41.1112_2 and 1.12.42.1104. I have also tried the complete reset that Santod recommends (stock ROM/recovery, factory reset in stock recovery, reflash of custom ROM).
Could this be more of an issue related to the GPE not being for a native Verizon device (thus not 100% working with the Network Extender)? Is there a way to force the mobile data reconnection (airplane mode hasn't been totally successful)?
JC Why said:
Hi,
I installed Santod's GPE 4.4.2 ROM, and I'm wondering if anyone has any experience with the GPE ROM and the Verizon 3G Network Extender.
On Bonestock 2.0.2, the phone connects to the Network Extender via voice and data (1x and 3G - unpredictably). If I am on wifi and turn off the wifi, the phone will fall back fairly quickly onto the 3G or 1x data from the extender.
What I have found so far on the GPE 4.4.2 ROM is that the phone will appear to not connect to the Network Extender's data (voice is fine). The "mobile network" status is "disconnected" and it does not appear to be trying to reconnect to the data network - either 3G via the NE or weak LTE (unlike Bonestock). If I shut off the network extender and walk outside the mobile network will eventually reconnect to LTE once wifi is toggled off.
I've tried both the radios (1.12.41.1112_2 and 1.12.42.1104. I have also tried the complete reset that Santod recommends (stock ROM/recovery, factory reset in stock recovery, reflash of custom ROM).
Could this be more of an issue related to the GPE not being for a native Verizon device (thus not 100% working with the Network Extender)? Is there a way to force the mobile data reconnection (airplane mode hasn't been totally successful)?
Click to expand...
Click to collapse
I don't have a lot of experience with the Network Extender as they don't stock them in the indirect retail stores, but from what I can tell it's probably more to do with Android 4.4 than anything else. It MAY be because the GPE port is a GSM based ROM and it's not properly talking to the extender, but that's more unlikely because it works just fine with Verizons data anyways.
Hello all,
I got my P6 for a few days and from time to time I had troubles to connect the data network (2G and 3G).
When I switch the data on, it connects to the network for 1/2 seconde and then it disconnects (the H+ symbol stays on though). Switching the data off and on again only repeats the problem.
Restarting the phone allowed me to finally have a stable connection so far but since this morning it doesn't work anymore. Removing the sim didn't help.
I'm on B125.
Anyone encountered this problem and managed to solve it?
Thanks!
I may have solved the problem.
Use tweakker from the play store to get the exact apn details for your carrier (mine is Base Belgium) and put them in the apn settings.
Since that I can connect the data without any issue (except a new bug: switching to "2g only" make the connection bug again, except if the data is switch off before and switch back on after a dozen of seconds). It seems that it is more like a carrier problem but that creates bugs only with Huawei products (source: internet).
It seems that the P6 is a very capricious phone, I love it but I wouldn't recommend it to anyone which is not an engineer!
since i unlocked the phone i am having problems with my phone
It refuses to stay connected to 3g networks . it connects but after a while it disconnects and doesn't connect again only( if i reboot the phone it does but drops again)
Forcing WCDMA only doesnt fix it , if i choose GSM/ WCDMA it reconnects to gsm
If i pick LTE signal i can do everything but receiving calls it says its turned off
I tried:
Installing stock firmware ( currently 4.4.2 DTM unbranded) and other custom firmware
Getting new sim card and changing carrier ( its not a carrier issue)
All Apn settings are fine
please advise
ok 4g according to info i saw i cant receive calls , however i want it to stick with 3g witch due to my problem has been impossible
signal bar drops after being full and ban no signal
Anyone?
Signal Drops == not fully compatible modem
Installed cyanogemmod and the issue is gonne used all day no issues
I have a G3 D855 International (or is it Taiwanese?) version - running the latest stock LG build, which identifies itself as LRX21R.A1440231662, version V20u-TWN-XX, Kernel 3.4.0, Android 5.0.
I have a Three (UK) SIM, and have recently been in California, where I observed some odd behaviour. I'd be glad if anyone is able to comment or explain any of this!
1) I never saw any 4G (LTE) connections. From other posts in this forum it does appear that this model of G3 may be incompatible with T-Mobile US and AT&T network frequencies, and if so that's understandable.
2) It seemed to have a very strong preference to connect to T-MO, but on that network it would frequently lose data connectivity, despite the phone showing a strong signal. My wife's Galaxy S3, also on Three, would stay connected all the time. If I tried manually searching for networks and selecting either T-MO or AT&T, usually that would restore connectivity. However...
3) Entering manual network selection from this state (connected to T-MO but not getting any data), the phone would display a warning along the lines of "Do you want to search for networks while there is an active data connection?" -- yet there was no data connection icon in the status bar, and no throughput. This feels like some sort of bug - the phone thought it had a data connection but really didn't?
3) Even though I would manually select the AT&T network, and get some throughput, the phone would fairly soon spontaneously reconnect to T-MO, and shortly afterwards again lose data connectivity. This became tedious and frustrating. Other phones I've had have always respected a manual network selection and stuck to the selected network, even when if another available network had a stronger signal. Not so this G3. Is this known, normal behaviour?
The only other thing that may be relevant is that for most of the time I had the phone set to connect only to WCDMA networks, because the data capability of GSM is next to useless, and since I'd not seen any LTE, and WCDMA + LTE only is not an option, WCDMA was really all I was interested in.
Hi everyone,
My M9 has been having consistent issues with LTE connectivity. I'm rooted, s-off. The issue I'm having is that I regularly only connect to the 3G network, and my phone labels it simply as "3107". In the network list, I'm often connected to the Verizon Tracfone network, not the full vzwinternet network. If I manually switch these, it only lasts a short amount of time and LTE connectivity is weak. I've re-flashed a stock rom, same issue. New sim card even, same issue.
Any suggestions on how I can see exactly what bands are on/off and if my baseband firmware is out of date and/or broken - and if so - where I can get the latest version to try and fix it?
Thanks