Just installed G-Lite 1.0.7. Loving the ROM so far, but just had a couple of things not working. No Swype at first, but I was able to restore that using Titanium and turning off the default android keyboard. Wifi calling is still broken.
I get a couple of error messages with it - "W005.1 ISP Error Retry" and then I get "You are currently not registered with the T-Mobile network. Would you like to register to enable Wi-Fi Calling?"
It gives me a register button to click on and when I click it the app closes and takes me back to the desktop. Noticed that in the settings for wifi calling there is nothing listed under "My Network" for "UNC Address" or "SGW Address". And if I try "Ping Network" the address it wants to ping just says "NULL".
Looks like the wifi calling app doesn't have any of its settings. Tried restoring the app with Titanium but the settings are still not there. Any ideas how to fix? Thanks!
jgummeson said:
Just installed G-Lite 1.0.7. Loving the ROM so far, but just had a couple of things not working. No Swype at first, but I was able to restore that using Titanium and turning off the default android keyboard. Wifi calling is still broken.
I get a couple of error messages with it - "W005.1 ISP Error Retry" and then I get "You are currently not registered with the T-Mobile network. Would you like to register to enable Wi-Fi Calling?"
It gives me a register button to click on and when I click it the app closes and takes me back to the desktop. Noticed that in the settings for wifi calling there is nothing listed under "My Network" for "UNC Address" or "SGW Address". And if I try "Ping Network" the address it wants to ping just says "NULL".
Looks like the wifi calling app doesn't have any of its settings. Tried restoring the app with Titanium but the settings are still not there. Any ideas how to fix? Thanks!
Click to expand...
Click to collapse
According to the T-Mobile twitter, Wi-Fi calling was down for maintenance today.
Sent from my HTC Vision using XDA App
Yeah so I just came back to my post to say that it randomly started working again. Hoping it was on TMO's end. Figures they would do it right when I switch roms...
Sent from my T-Mobile G2 using XDA App
Hey man I was having the same problem today - however, after a reboot (not intended to fix the problem), it was working fine! I may have just timed it perfectly or something. I have been having issues like this maybe twice in the last few weeks or so, counting this time. Reboot fixed it last time, so I figured that was it then.
Hearing about T-Mo's issue makes me wonder if I just happened to get it working coincidentally. Or, maybe it was a weird issue on there end that I could fix simply by rebooting my phone before they fixed it without me having to do that.
If that makes any sense at all. Haha.
I have a strange problem with my Galaxy Nexus. When I connect to the internet using the mobile network, the connection is extremely slow. (And by slow I mean around 2-3 minutes to fully load the google mobile search page). I tried the "Speed Test" app to test the network speed, but it simply fails after a while mentioning "Network communication issues" (maybe it times out?).
The weird thing is that other devices can access the internet fine when connected to the internet through the Nexus by enabling its WiFi hotspot feature. So the other devices can use the Nexus's internet connection with acceptable speeds while the Nexus itself can't. Anybody got any ideas as to why this happens? One thing I could think of was that the DNS given to the Nexus by the mobile network being slow (whereas the other devices connected to it use the DNS in their WiFi settings). I tried to verify this by using the "DNS Changer" app, but it didn't solve the problem, although I'm not sure that it actually changed the DNS used by the Nexus.
Any help is greatly appreciated.
Bump for a solution for this man!
Sent from my Galaxy Nexus using xda premium
Problem solved!
Finally found the culprit! It wasn't DNS after all. My carrier's data settings include an IP and port for a proxy. When I configured the APN on the phone, I entered them simply because they were there. Turns out that keeping them empty solves the speed issues on the phone. So the bottleneck was the carrier's proxy server. I guess tethered clients don't use the proxy setting on the phone and therefore didn't experience the speed issue.
Inspiration fixed wifi hotspot not connecting to internet
I wanted to thank you because your solution helped me fix my problem. I couldn't connect my native wifi hotspot on my GSM Galaxy Nexus to my Nexus 7. The wifi indicator would come on to my N7 but it stayed gray (i.e. wasn't connected to the internet). Turns out that last month I set up an APN to connect to T-Mobile via IPv6. Well, apparently, this creates a problem with using the wifi hotspot. I switched back to regular T-Mo connection and...if works! My GNex/N7 combo is fully functional. Thanks again for the inspiration!
wingman1234 said:
Finally found the culprit! It wasn't DNS after all. My carrier's data settings include an IP and port for a proxy. When I configured the APN on the phone, I entered them simply because they were there. Turns out that keeping them empty solves the speed issues on the phone. So the bottleneck was the carrier's proxy server. I guess tethered clients don't use the proxy setting on the phone and therefore didn't experience the speed issue.
Click to expand...
Click to collapse
thank you
wingman1234 said:
Finally found the culprit! It wasn't DNS after all. My carrier's data settings include an IP and port for a proxy. When I configured the APN on the phone, I entered them simply because they were there. Turns out that keeping them empty solves the speed issues on the phone. So the bottleneck was the carrier's proxy server. I guess tethered clients don't use the proxy setting on the phone and therefore didn't experience the speed issue.
Click to expand...
Click to collapse
You are my hero man. Thank you
I'm experiencing a very odd issue with my Galaxy S3 on the Virgin Network. For some reason I can't go on any SSL enabled site no matter what browser I use and which website I go to. The most descriptive error message comes from firefox which says SSL received a record which exceeded the maximum permissible length. Oddly if I enable wifi or otherwise bypass the regular network (VPN etc.) everything works properly. SSL enabled apps like banking sites work with no issue.
I'm currently on the latest nightly of the Carbon Rom, though I've experienced it when I was on Cyanogenmod as well so I don't believe that it has anything to do with the rom itself. Any idea on what might be going on?
Ensure your APN settings are correct.
valunthar said:
I'm experiencing a very odd issue with my Galaxy S3 on the Virgin Network. For some reason I can't go on any SSL enabled site no matter what browser I use and which website I go to. The most descriptive error message comes from firefox which says SSL received a record which exceeded the maximum permissible length. Oddly if I enable wifi or otherwise bypass the regular network (VPN etc.) everything works properly. SSL enabled apps like banking sites work with no issue.
I'm currently on the latest nightly of the Carbon Rom, though I've experienced it when I was on Cyanogenmod as well so I don't believe that it has anything to do with the rom itself. Any idea on what might be going on?
Click to expand...
Click to collapse
Is your time and date set to automatic?
My APN settings are correct and my time and date are set to automatic.
After doing some more testing only certain SSL sites don't work which makes the whole situation even more murky. startpage.com doesn't work, but the login of tdcanadatrust does. This is really weird.
Are you in a public WiFi network or in an area with a lot of WiFi networks?
If in public WiFi: Someone may be trying to hack you by SSL strip or redirect you.( Which can be why a VPN works)
If there are many WiFi networks in range : Download WiFi Analyzer from Google play to check WiFi channels, and switch your WiFi router to a cleaner channel if needed.
(If there are a lot of WiFi networks all on the same "channel", it can cause common data loss,lag and congestion. )
Sometimes a VPN can fix the problems with congested wifi channels, but I'm not sure.
If none of these ideas apply, clear cookies and cache.
If that still doesn't work:
Settings > Security > Clear Stored Credentials.
This will clear your SLL certificates and VPN info saved on your device. It might help with your browser.
While the SSL strip idea is a valid point that I hadn't considered initially I don't think that's the issue because I rarely connect to unknown wifi networks when traveling, and I think that all certificates would come back invalid if somoene was pulling that instead of the hit and miss situation I'm currently experiencing.
The Wifi bit is what really gets me though since the sites that don't work on the cell network work perfectly when I'm on wifi with no other changes needed other than the change in the way the phone connects. I have tried clearing the browser's cache with no luck and I'm not able to clear the stored credentials as described as the option is greyed out for me.
I thought that it might have something to do with the cerficates themselves, something about the way the browser/phone accepts certs depending on connection method but I can't see any difference between working sites and non working sites other than a difference in certifying authority (GoDaddy vs Verisign for example)
Problem Solved
I'm bumping up this thread to bring attention to the fact that I've found the solution to the problem. The issue is not with the rom itself, but the proxy that Bell/Virgin insists on its users using. Clearing the proxy and port settings for the Bell APN found under mobile device settings fixes the issue nicely. Special thanks to Dream_Team over at this thread for finding the solution.
Makes me wonder why there's an HTTP only (port 80) proxy set by default in the APN settings when it's not needed to access the network..
Hey All,
I just picked up my T-Mobile LG G3 last night and rooted it.
I am trying to use the tethering app like I did on the Nexus 5 but my other devices are not picking it up when I have it enabled on the new phone.
The app say's its enabled and shows the Name and passcode to join it, but again, no other devices that I was using before (ipad for example) see it when I scan for WiFi networks.
Can anyone please help? I use this app when at work and need to get it figured out and up and running again if possible.
Thank you,
Whiteice
Is the Wifi Tether Router app you're using by Fabio Grasso?
That's the one I was using on my Nexus 5 without any issues. I also just moved over to the Tmo G3 and can't seem to get any of my devices to pick up the SSID either. The developer says that it does work on the G3 and I also followed the settings laid out by the developer in his devices configuration page but still a no go. I emailed him to see if he may have some suggestions but no word yet. Hopefully he replies with something I/we can try to get this running. It was a great app on all my previous phones. I have faith in this developer, he seems to update his apps fairly regularly.
hoy128 said:
Is the Wifi Tether Router app you're using by Fabio Grasso?
That's the one I was using on my Nexus 5 without any issues. I also just moved over to the Tmo G3 and can't seem to get any of my devices to pick up the SSID either. The developer says that it does work on the G3 and I also followed the settings laid out by the developer in his devices configuration page but still a no go. I emailed him to see if he may have some suggestions but no word yet. Hopefully he replies with something I/we can try to get this running. It was a great app on all my previous phones. I have faith in this developer, he seems to update his apps fairly regularly.
Click to expand...
Click to collapse
Yes that is the same app I'm using.
I contacted him and he replied back asking Me to send a log file from within the app. I Did that this morning and waiting For further feedback. If I hear anything I Will report back here.
WhiteiceDMSTech said:
Yes that is the same app I'm using.
I contacted him and he replied back asking Me to send a log file from within the app. I Did that this morning and waiting For further feedback. If I hear anything I Will report back here.
Click to expand...
Click to collapse
I had the SAME problem with the app with my G3 and I've been back and forth with him via email. I had to try a few methods he gave me but the last one finally did the trick!
Here's his email that had the steps to get it to work below:
strange, yes other users use this app on G3
please try this config
Interface wlan0
Method 2
Channel 1
Encryption wpa2-psk
"No Firmware Reload" <- UNCHECKED
Let me know
Thanks
Fabio
Click to expand...
Click to collapse
It works now, because the settings on his site and his emails weren't working, but the above finally did it for me.
But I noticed the the DNS process, /system/bin/dnsmasq, was using on average 40% of my CPU constantly with the app enabled. So I checked the "Use Internal DHCP" in the DHCP settings and the process ended and the CPU use returned to normal.
I had asked in a reply if this app uses IP Tables to mask the hotspot use as mobile use or still shows up as Hotspot with T-Mobile. I wasn't sure if enabling or disabling the Internal DHCP would negate it or not, but he hasn't responded back yet.
Does anyone know if this app does mask it as mobile and not hotspot?
I just came off of Sprint to T-Mobile two days ago and I always used the native hotspot function on my rooted Note 3 that masked it as mobile use.
Hope it works for you guys as well.
JustLok said:
I had the SAME problem with the app with my G3 and I've been back and forth with him via email. I had to try a few methods he gave me but the last one finally did the trick!
Here's his email that had the steps to get it to work below:
It works now, because the settings on his site and his emails weren't working, but the above finally did it for me.
But I noticed the the DNS process, /system/bin/dnsmasq, was using on average 40% of my CPU constantly with the app enabled. So I checked the "Use Internal DHCP" in the DHCP settings and the process ended and the CPU use returned to normal.
I had asked in a reply if this app uses IP Tables to mask the hotspot use as mobile use or still shows up as Hotspot with T-Mobile. I wasn't sure if enabling or disabling the Internal DHCP would negate it or not, but he hasn't responded back yet.
Does anyone know if this app does mask it as mobile and not hotspot?
I just came off of Sprint to T-Mobile two days ago and I always used the native hotspot function on my rooted Note 3 that masked it as mobile use.
Hope it works for you guys as well.
Click to expand...
Click to collapse
Just tried those settings and so far it appears to be working.
Thanks you Fabio,
Whiteice
Darn, I wish it was working for me. I found that on Fabio's page and used those settings but they're still not working for me. Also tried to use the internal DHCP option but still no dice. I just sent Fabio my log file, hopefully he finds something that can get me up and running.
Woo hoo...I overlooked the method. Just confirmed the strings above works. Thanks all/Fabio!
JustLok said:
I had the SAME problem with the app with my G3 and I've been back and forth with him via email. I had to try a few methods he gave me but the last one finally did the trick!
Here's his email that had the steps to get it to work below:
It works now, because the settings on his site and his emails weren't working, but the above finally did it for me.
But I noticed the the DNS process, /system/bin/dnsmasq, was using on average 40% of my CPU constantly with the app enabled. So I checked the "Use Internal DHCP" in the DHCP settings and the process ended and the CPU use returned to normal.
I had asked in a reply if this app uses IP Tables to mask the hotspot use as mobile use or still shows up as Hotspot with T-Mobile. I wasn't sure if enabling or disabling the Internal DHCP would negate it or not, but he hasn't responded back yet.
Does anyone know if this app does mask it as mobile and not hotspot?
I just came off of Sprint to T-Mobile two days ago and I always used the native hotspot function on my rooted Note 3 that masked it as mobile use.
Hope it works for you guys as well.
Click to expand...
Click to collapse
I can confirm the above settings including the internal DHCP work perfect on my end also!
As a side note, it also appears that the data usage shows up on my T-Mo account as regular "Internet Access", not Hot Spot usage. Maybe I was looking at it wrong, or maybe my account hasn't fully updated yet, but it looks promising.
Thanks to JustLok for the tips!
Good to know it works. I tried it a few days ago and I didn't get any data, so I uninstalled it. Now that you guys confirm it's working, I might buy it.
I've been trying to get the stock tether to work. Found where to change the APN so that it doesn't use the pcweb one that tracks as hotspot, but I'm running into other issues, some other checks that need to be circumvented. This app is probably using the fast APN since pcweb is only listed deeply in the frameworks-res.apk of the G3 and those should never be used unless this app tries to tether as DUN (which I doubt).
Question, does this app have Tasker integration?
Just to clarify...'No firmware reload' should be checked or unchecked? Cheers!
wideasleep1 said:
Just to clarify...'No firmware reload' should be checked or unchecked? Cheers!
Click to expand...
Click to collapse
It would be unchecked, as listed in my post above in regards to the settings and tweaks to get it to work with D851 G3.
Also, been using it for days now and it does mask the tether use as mobile data and NOT as Hotspot data, as orbitalcomp confirmed, even using the internal DHCP server (which I was wondering if it would with the IP Table masking).
As for Tasker integration, I'm not sure what you mean havanahjoe with Tasker, as in the normal App Tasker or an app titled tasker?
I also noticed that my data connection just dies every so often, both on my G3 and my wife's G3. It show a connection with LTE and the data arrow up lit, but no data is moving. Even confirmed with the Internet Speed Meter Lite app that no data was being sent or received. I have to enable Airplane mode and then back off and the data connections becomes live again. I've read several reports of this on XDA too on Tmo G3's. This is either with the tether app or not, Tmo's data connection just stops working and needs to disconnect and reconnect to the tower/antenna to work again.
Finally, when using the widget for this tether app, when first tapping it (after a reboot or so), it does not enable it. You have to wait a little and then tap it again for it to enable. Once you get it to enable and become active, turning it on or off via the widget works on the first tap. It's just the first initial widget use upon a reboot that it takes two taps, about 5 secs apart to actually start up.
JustLok said:
It would be unchecked, as listed in my post above in regards to the settings and tweaks to get it to work with D851 G3.
Also, been using it for days now and it does mask the tether use as mobile data and NOT as Hotspot data, as orbitalcomp confirmed, even using the internal DHCP server (which I was wondering if it would with the IP Table masking).
As for Tasker integration, I'm not sure what you mean havanahjoe with Tasker, as in the normal App Tasker or an app titled tasker?
I also noticed that my data connection just dies every so often, both on my G3 and my wife's G3. It show a connection with LTE and the data arrow up lit, but no data is moving. Even confirmed with the Internet Speed Meter Lite app that no data was being sent or received. I have to enable Airplane mode and then back off and the data connections becomes live again. I've read several reports of this on XDA too on Tmo G3's. This is either with the tether app or not, Tmo's data connection just stops working and needs to disconnect and reconnect to the tower/antenna to work again.
Finally, when using the widget for this tether app, when first tapping it (after a reboot or so), it does not enable it. You have to wait a little and then tap it again for it to enable. Once you get it to enable and become active, turning it on or off via the widget works on the first tap. It's just the first initial widget use upon a reboot that it takes two taps, about 5 secs apart to actually start up.
Click to expand...
Click to collapse
Thanks for the update and confirmation of mobile vs. Hotspot..which meets my own experience. FWIW, your settings quote from Fabio simply says "No Firmware Reload" and doesn't state checked or unchecked...which is why I asked. At least I can't see it on Tapatalk. [emoji4]
Sent from my amazing LGG3!
JustLok said:
It would be unchecked, as listed in my post above in regards to the settings and tweaks to get it to work with D851 G3.
Also, been using it for days now and it does mask the tether use as mobile data and NOT as Hotspot data, as orbitalcomp confirmed, even using the internal DHCP server (which I was wondering if it would with the IP Table masking).
As for Tasker integration, I'm not sure what you mean havanahjoe with Tasker, as in the normal App Tasker or an app titled tasker?
I also noticed that my data connection just dies every so often, both on my G3 and my wife's G3. It show a connection with LTE and the data arrow up lit, but no data is moving. Even confirmed with the Internet Speed Meter Lite app that no data was being sent or received. I have to enable Airplane mode and then back off and the data connections becomes live again. I've read several reports of this on XDA too on Tmo G3's. This is either with the tether app or not, Tmo's data connection just stops working and needs to disconnect and reconnect to the tower/antenna to work again.
Finally, when using the widget for this tether app, when first tapping it (after a reboot or so), it does not enable it. You have to wait a little and then tap it again for it to enable. Once you get it to enable and become active, turning it on or off via the widget works on the first tap. It's just the first initial widget use upon a reboot that it takes two taps, about 5 secs apart to actually start up.
Click to expand...
Click to collapse
The hiding of the traffic is all about the APN. WiFi Tether Router uses the phone APN (fast.t-mobile.com) and the built-in hotspot uses pcweb.tmobile.com. That's why it's so easy to bypass, as long as WiFi Tether Router can do its thing by doing some iptables, dnsmasq and other Linux magic.
I have seen my LTE connection stop working from time to time. Not while tethering, but I rarely tether for more than 30 minutes at a time. Whenever I lose data, I just do the same, airplane mode on/off and it's back.
Tasker is an automation app. It's great for getting things done automatically. I use tethering in the car so that my dash mounted Nexus 7 can get internet. With Tasker, my hotspot is automatically turned on when I get in the car, and automatically turned off when I turn the car off. There is a method for applications to talk to each other in Android, these messages are called intents. With intents you can tell an app to shut down, to load a specific playlist (Spotify for example), or to enable/disable something. When using the stock Tether app, the system lets you toggle it with intents that Tasker already knows about. WiFi Tether Router has no intents, so there is no way to externally tell it to turn the hotspot on or off. The workaround is to emulate touching the enable/disable button (on the app or the widget). It's kludgy, but it works. It would be much cleaner and reliable if the dev enabled this functionality.
I tried the setting you suggested on the other thread, and by using Internal DHCP and not having WiFi Tether Router use DNSMasq to provide DHCP and DNS services, my battery drain is much more acceptable. I only lost 3% on my drive to work. I usually would lose 10% or more! This setting might be needed for other carriers where you do need to hide your data, but we don't have to worry about this with T-Mo.
havanahjoe said:
....
Tasker is an automation app. It's great for getting things done automatically. I use tethering in the car so that my dash mounted Nexus 7 can get internet. With Tasker, my hotspot is automatically turned on when I get in the car, and automatically turned off when I turn the car off. There is a method for applications to talk to each other in Android, these messages are called intents. With intents you can tell an app to shut down, to load a specific playlist (Spotify for example), or to enable/disable something. When using the stock Tether app, the system lets you toggle it with intents that Tasker already knows about. WiFi Tether Router has no intents, so there is no way to externally tell it to turn the hotspot on or off. The workaround is to emulate touching the enable/disable button (on the app or the widget). It's kludgy, but it works. It would be much cleaner and reliable if the dev enabled this functionality.
I tried the setting you suggested on the other thread, and by using Internal DHCP and not having WiFi Tether Router use DNSMasq to provide DHCP and DNS services, my battery drain is much more acceptable. I only lost 3% on my drive to work. I usually would lose 10% or more! This setting might be needed for other carriers where you do need to hide your data, but we don't have to worry about this with T-Mo.
Click to expand...
Click to collapse
Thanks for that explanation on Tasker, when I mentioned it to my wife last night, she said she was already using it on her old HTC One M7, so much for me being ahead of the curve. Or on the curve even, I guess. :cyclops:
I have noticed when using the Wifi Tether App, sometimes my laptop won't or can't connect to the hotspot after a while using it. I use it for extended periods of time at work, hours on end even, and my laptop will just disconnect from my SSID and won't connect, despite it being live. The SSID is seen and the laptop tries to connect but then just says it cannot do so.
I need to reboot my laptop for it to connect to it again. I'm not sure if it's the IP lease on my laptop expired or wasn't renewed with the tether app. Unfortunately, I cannot perform an IP renew or release in CMD on my laptop, because it's disconnected and needs a connection to do it! So I can't narrow the error to that function or not.
When I use the native Hotspot with TMo, I didn't have this problem last week when I was using it for three days before getting the Tether app.
Just some experience with it so far, in case anyone else was seeing the same or so.
How the heck did you all get this app to work? I cant change my apn settings to ipv4 like he says too. Data cuts off when I do
after update to lollipop not working
I was trying different settings,
After factory reset T-mobile hotspot is working, but when I tried to run "WiFi Tether Router" even t-mobile hotspot is not working...
Are you guys using d851 with lollipop?
Could somebody post for me correct settings?
Thx
clfuadam said:
I was trying different settings,
After factory reset T-mobile hotspot is working, but when I tried to run "WiFi Tether Router" even t-mobile hotspot is not working...
Are you guys using d851 with lollipop?
Could somebody post for me correct settings?
Thx
Click to expand...
Click to collapse
This app is broken in g2/g3 lollipop. It will also break built in tmo hotspot app as well and you would have to factory reset to get it working again. I switch back to kitkat just to use this app and also see no benefit in lollipop.. yet..
Can someone please help?
I can't get any of my computers to show the network name for WiFi tether router. I've never had this issue until today. My wife's phones doesn't have a problem, but mine won't show at all
I just switched to unlimited data on my LG G3 and got this app...
It works great with the G3 settings shown on the first page of this thread and on the app website. The speeds are the same on the device as on a client device so that's good...very fast LTE.
I originally tried setting the APN to LP4 (from default LP6) as the application directions stated must be done for T-Mobile but found that the network slowed (4G instead of LTE) and became somewhat unreliable. I'm wondering if this is even necessary on the G3 based on what I'm reading here. I switched the APN back to default.
My plan includes 5GB of tethering with unlimited on board so the problem is that how can I tell which data I'm using? My account page only shows unlimited it doesn't show how much of that is used for tethering even when I used the native tether app. I suppose I just have to try and go over and see what happens?
I've got this working on Cloudy 2.5 but the data is being counted as Hotspot data. Other than the settings earlier in the thread is there anything else I need to change so that it doesn't get counted as Hot Spot data?
TIA!
Hello,
yesterday when testing and setting up the OP3 I noticed that, after booting up, the WiFi didn't connect automatically.
I always had to go into WiFi settings, click on my WiFi and select "Connect". From then on, it worked normally.
(Had to boot really often, so it was clear that it was not a "sometimes" incident.)
Does anyone else have this?
I've had problems connecting to WiFi it keeps coming up can't authenticate connection also had LTE issues so I had to enter the wap details myself and that's OK but on the WiFi I've put a ticket in with one plus and waiting for reply..
Sent from my ONEPLUS A3003 using XDA Free mobile app
With OxygenOS 3.1.3, now I don't have the WiFi problem anymore...
I have the issue where i completely loose data, there is no LTE or H. Flipping airplane mode on and off seems to fix the issue?
Sent from my OnePlus 3