Develop Bugs

Did I brick my Galaxy s3?

Well.. in a nutshell, I installed CWM recovery, rooted the phone by installing the update from the "SD Card" when it was really the phone's internal memory, and all worked well. The original idea was to edit some .prop file in /system through a root file explorer. Basically, I changed a value as one stupid tutorial suggested which ended up causing the phone to boot in to a black screen. The phone goes in to recovery and D/l mode, but the problem is flashing ANY type of ROM to the phone. Odin is useless because you can only attach .tar, .gzip, .smd,... etc.. and the roms are usually in a .zip format. This means I need to get the .zip rom on to the phone's "Sd card" which is just internal memory and should clearly specify so. I can't exactly access my phone's memory afaik since.. you know.. the phone doesn't have any OS to boot up.
Now what is it that I can do to get a rom on the phone? Android commander is another useless program right now, also. Aside from the program always telling me my rooted phones aren't rooted, the program doesn't even detect the phone while it's in dl mode, recovery mode, bricked mode, garabge mode,... you get the point. I'm just a little irritated after trying for two days to get in to my own internal storage. If anyone has anything to share, and decides to share it, thanks a lot.

bump it would be nice for someone to help....

Nothing is flashing because you changed the ro.build props. There are stock Odin roms floating atound, or you can remove the device check from the updater script in the zips you download and then try to flash.
Sent from my SGH-T999 using xda premium

Or if you have adb you can push back stock build prop back to /system
Sent from my SGH-T999 using xda premium

All these suggestions I read on googled pages from people having similar issues are just such perfect ideas. I wish they worked, though. I have tried pretty much everything.
Since my last post I:
- Wiped every cache you can dream of
- Flashed boot-stock-tmobile-sgh-t999 probably 4 different times, and did the above step after each failure.
- Tried every possible way to get in the "external sd card" meaning "my phone's internal memory"
- Tried pulling the build.props, however without a valid operating system, I'm not going to get very far.
- Looked ALL OVER the internet for a STOCKY RECOVERY ROM in a .tar format. I don't see why it's too much to ask to be able to simply flash a rom from the pc odin since I'm pretty sure I won't be using odin mobile without first getting adroid booted up some how.
Yes, I disabled auto reboot in odin, I've tried pretty much everything and I really don't know where else to turn.

In android updater scripts there is a check into make sure you're flashing the correct phone. If the file is missing, it's going to fail this check and not flash.
If you unzip a Rom and modify this it should work.
On second thought,
You should follow the thread about returning to stock. That has an Odin flash able image that should get you booting again and then you can restart the process to root your phone.
Sent from my SGH-T999 using xda premium

I had that same problem I was only able to go to download mode so I used Odin and flashed stock tmo file to unroot the phone I can't remember exactly what it was called and it worked just fine and now I'm rooted again on cm10 and it works perfectly
Sent from my SGH-T999 using xda app-developers app

boot into recovery with the phone plugged into your computer. then open cmd (if in windows) and cd to the directory with a different rom then do
adb push xxx.zip /sdcard/
wait for it to finish then reboot recovery and flash the rom.

jellydroid13 said:
boot into recovery with the phone plugged into your computer. then open cmd (if in windows) and cd to the directory with a different rom then do
adb push xxx.zip /sdcard/
wait for it to finish then reboot recovery and flash the rom.
Click to expand...
Click to collapse
It's failing getprop ro.build.device
It's gonna do that even with pushing a new Rom to the sdcard unless those lines are removed from updater script.
Sent from my SGH-T999 using xda premium

similar problem, but long story short I can't boot into recovery and flashing through ODIN gets me an "unsupport dev_type" message and no results. Any suggestions?

The super obvious suggestion is to just restore your nandroid backup. Before any mod always make one that's in good shape. Every guide tells you to do this but you didn't mention it. Did you not make one? If you can get into recovery and/or DL mode then I'm pretty sure you are not bricked though.

the-Mike_D said:
If you can get into recovery and/or DL mode then I'm pretty sure you are not bricked though.
Click to expand...
Click to collapse
exactly. something's not being done right.

dyuhas1 said:
similar problem, but long story short I can't boot into recovery and flashing through ODIN gets me an "unsupport dev_type" message and no results. Any suggestions?
Click to expand...
Click to collapse
After seeing this OP, are you saying you can NOT get into d/l mode? also, look under devices on win machine, do you see an entry QLOAD*** if so you can NOT and will not get to d/l mode. It is hard bricked. time to get a jtag service. Stop wasting time looking for an answer and get it fixed. again, if you can not get into d/l mode, this is my suggestion. I HAVE BEEN THERE, DONE THAT. BTW, I have the usb jig, IT WILL NOT WORK on hard brick. hehe used it several times on soft bricks though.
Good luck.

Here is a French company doing that rescue service for bricked Galaxy S3 by JTAG
Réparer brick Galaxy S3

Wow, here is a quick and fast service. Get the usbjiig also for future soft-bricks.
MobileTechVideos.COM
http://mobiletechvideos.mybigcommerce.com/

Has my phone bitten the dust?

Really hope somebody can help.
I have had a galaxy note 2 for about 6 months on Vodafone UK N7100.
Today while i was at work i felt something hot in my pocket, my phone was very hot (i was not doing anything with it) The phone was stuck on the Samsung boot screen.
After a few minutes of looking at this i realised it was stuck and removed the battery. SInce then i have been unable to get past the boot screen, i can't get into download mode or reboot mode. The only things to note. When i turn my phone on a red light flashes. When i plug my charger in the charge icon appears on screen but it does not charge.
Really hoping somebody can help.
I had rooted my phone if that helps (it did not cause this problem and has been functioning rooted for months)
Update
Just managed to get to a screen which warned me about installing custom software and did i want to continue. I said yes and it is now downloading something

How did you get to that screen?
Sent from my Desire S using xda app-developers app

The Mole said:
Really hope somebody can help.
I have had a galaxy note 2 for about 6 months on Vodafone UK N7100.
Today while i was at work i felt something hot in my pocket, my phone was very hot (i was not doing anything with it) The phone was stuck on the Samsung boot screen.
After a few minutes of looking at this i realised it was stuck and removed the battery. SInce then i have been unable to get past the boot screen, i can't get into download mode or reboot mode. The only things to note. When i turn my phone on a red light flashes. When i plug my charger in the charge icon appears on screen but it does not charge.
Really hoping somebody can help.
I had rooted my phone if that helps (it did not cause this problem and has been functioning rooted for months)
Update
Just managed to get to a screen which warned me about installing custom software and did i want to continue. I said yes and it is now downloading something
Click to expand...
Click to collapse
does it get recognize in odin if yes try to flash stock rom and revive your phone hopefully u are not using the 4.1.1 rom better get a 4.1.2 and bring it to life :good:
if u can get to download mode now then flashed philz recovery first. After flashing recovery wipe dalvik, cache partition & then data reset.then u can flash stock using odin. try this if the first one doesnt work

shhbz said:
does it get recognize in odin if yes try to flash stock rom and revive your phone hopefully u are not using the 4.1.1 rom better get a 4.1.2 and bring it to life :good:
if u can get to download mode now then flashed philz recovery first. After flashing recovery wipe dalvik, cache partition & then data reset.then u can flash stock using odin. try this if the first one doesnt work
Click to expand...
Click to collapse
I got there through home volume down and power during boot up.
I can't get into recovery though (using volume up)
Which version of odin should i be using? I am using 3.07
I am using the rom suggested in this guide http://reviews.cnet.co.uk/mobile-ph...e-2-from-rooted-to-factory-settings-50010623/
If i should not be using that where can i get the one i should be using.
When i try to install the stock rom linked above i get the message failed no PIT partition
Thanks for all the help so far

The Mole said:
I got there through home volume down and power during boot up.
I can't get into recovery though (using volume up)
Which version of odin should i be using? I am using 3.07
I am using the rom suggested in this guide http://reviews.cnet.co.uk/mobile-ph...e-2-from-rooted-to-factory-settings-50010623/
If i should not be using that where can i get the one i should be using.
When i try to install the stock rom linked above i get the message failed no PIT partition
Thanks for all the help so far
Click to expand...
Click to collapse
this would be your last hope http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5 follow the guide properly marked in red and remember to tick re partition in odin, if this doesnt work then your phone has been affected by sds due to 4.1.1 rom so u need to take it to service for motherboard replacement which is borne by samsung so no worries, and remember never to use a 4.1.1 rom in note 2 get the 4.1.2 rom or rather they will install that only this time and in future just go through dr.ketan thread http://forum.xda-developers.com/showthread.php?t=1896696 here it will guide you perfect instead following some untidy guides
for odin use 3.04 it works great though i havent tried new version as 3.04 works great you will get it in ketan thread

shhbz said:
this would be your last hope http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5 follow the guide properly marked in red and remember to tick re partition in odin, if this doesnt work then your phone has been affected by sds due to 4.1.1 rom so u need to take it to service for motherboard replacement which is borne by samsung so no worries, and remember never to use a 4.1.1 rom in note 2 get the 4.1.2 rom or rather they will install that only this time and in future just go through dr.ketan thread http://forum.xda-developers.com/showthread.php?t=1896696 here it will guide you perfect instead following some untidy guides
for odin use 3.04 it works great though i havent tried new version as 3.04 works great you will get it in ketan thread
Click to expand...
Click to collapse
Thanks for the advice i am downloading the file now.
I did not manage to install the rom i suggested i was using so i don't think that could have been the issue. My phone just seemed to get hot then stop working, i hope as you suggested it is not my motherboard. Did you say that i should still be covered by the warrenty even though i had rooted my device?

The Mole said:
Thanks for the advice i am downloading the file now.
I did not manage to install the rom i suggested i was using so i don't think that could have been the issue. My phone just seemed to get hot then stop working, i hope as you suggested it is not my motherboard. Did you say that i should still be covered by the warrenty even though i had rooted my device?
Click to expand...
Click to collapse
well your reply is quite confusing
1.did you manage to flash the rom with pit in odin. was it successful or you get any errors
2.does your phone start now
3.if not then your phone has died and it needs to be taken to service guys ,but just check what the status of your phone in download mode is it official or custom . if its official then no worries just go ahead and take it to service guys and tell them abt your issue that the phone stopped working while in pocket dont info them that you rooted it ever just make them blv that it was a sds caused by 4.1.1 rom so they replace it free.
i mean your motherboard

Sorry if i am confusing matters.
I did not manage to flash anything it was just coming up with failed no PIT partition.
Current binary samsung official
My system status is custom
Are these ok to return my phone with?
I decided to take the advice offered and download the recovery but got confused.
Do i need all of the files from that link or just 1?
I downloaded the first one N7100XXDMB2_Factory
It contained
boot
cache
hidden
modem.bin
recovery
sboot.bin
system
tz
None of these are the md5 format
i am now thinking i should have downloaded XXDLJ2_OXA_Factory
Is that correct or was i right with the first file. If i was right downloading the first file then where do i get the md5 files required for odin to do my factory restore.
Know these are very noobish questions just doint want to do anything wrong

In answers to your questions....
1) Did i manage to flash the rom with it in odin
No
I got confused which files i should be using and did not want to do anything without being sure
2) My phone does not start
3) When i am in download mode my phone shows
Current binary Samsung official
My system status is custom
Are these ok to return my phone with?

The Mole said:
Sorry if i am confusing matters.
I did not manage to flash anything it was just coming up with failed no PIT partition.
Current binary samsung official
My system status is custom
Are these ok to return my phone with?
I decided to take the advice offered and download the recovery but got confused.
Do i need all of the files from that link or just 1?
I downloaded the first one N7100XXDMB2_Factory
It contained
boot
cache
hidden
modem.bin
recovery
sboot.bin
system
tz
None of these are the md5 format
i am now thinking i should have downloaded XXDLJ2_OXA_Factory
Is that correct or was i right with the first file. If i was right downloading the first file then where do i get the md5 files required for odin to do my factory restore.
Know these are very noobish questions just doint want to do anything wrong
Click to expand...
Click to collapse
well follow this video but just select all file required and then flash instead flashing twice hope this video helps as u need to select individual file
https://www.youtube.com/watch?v=CMSsoCqZr1w if you still face prob ask the uploader in that thread maybe he can help you and as far as system status is concerned u need to either flash a stock rom or get into recovery to wipe data and factory reset or ven this https://www.youtube.com/watch?v=PpWcM44On88 for your proper understanding. dont you get .tar file and pit file in that download
are u able to enter into recovery mode as first post u mentioned download mode not working now u say its working

shhbz said:
well follow this video but just select all file required and then flash instead flashing twice hope this video helps as u need to select individual file
https://www.youtube.com/watch?v=CMSsoCqZr1w if you still face prob ask the uploader in that thread maybe he can help you and as far as system status is concerned u need to either flash a stock rom or get into recovery to wipe data and factory reset or ven this https://www.youtube.com/watch?v=PpWcM44On88 for your proper understanding
are u able to enter into recovery mode as first post u mentioned download mode not working now u say its working
Click to expand...
Click to collapse
Sorry recovery mode is not working, only download mode, i will have a look at the suggested video.
Thanks again for your continued help

The Mole said:
Sorry recovery mode is not working, only download mode, i will have a look at the suggested video.
Thanks again for your continued help
Click to expand...
Click to collapse
well initially it was a bootloader issue but destroying the pit became an issues hopefully u get it back to life this time

shhbz said:
well initially it was a bootloader issue but destroying the pit became an issues hopefully u get it back to life this time
Click to expand...
Click to collapse
I have managed to get hold of the correct files, however when i try to run them in ODIN ODIN does not get past the stage get PIT for mapping.
Can i try anything without the PIT stage?

The Mole said:
I have managed to get hold of the correct files, however when i try to run them in ODIN ODIN does not get past the stage get PIT for mapping.
Can i try anything without the PIT stage?
Click to expand...
Click to collapse
If your phone doesn't have a partition map, then no, you can't.
You can try, as a last resort, using this guide: http://forum.xda-developers.com/showpost.php?p=43760271&postcount=22
I had a similar problem not too long ago (although it started with all apps crashing and then stuck at bootscreen) and managed to fix my phone.
Sent from my GT-N7100

vladeco said:
If your phone doesn't have a partition map, then no, you can't.
You can try, as a last resort, using this guide: http://forum.xda-developers.com/showpost.php?p=43760271&postcount=22
I had a similar problem not too long ago (although it started with all apps crashing and then stuck at bootscreen) and managed to fix my phone.
Sent from my GT-N7100
Click to expand...
Click to collapse
Sounds like the same issue i have had. Apps kept crashing, i never thought it was the phone just the apps. I will look into the link thanks very much
CAn i just ask what is an EFS and how do i get a backup of it

If you need any help I'm here. Cheers!
Sent from my GT-N7100

vladeco said:
If you need any help I'm here. Cheers!
Sent from my GT-N7100
Click to expand...
Click to collapse
Thanks can i just ask what EFS is and how i get a backup of mine before i carry out your guide.

The Mole said:
Thanks can i just ask what ENS is and how i get a backup of mine before i carry out your guide.
Click to expand...
Click to collapse
EFS is a part of the system that stores your serial number, IMEI and everything related to your phone specifically. You are generally able to back it up using a custom recovery or using software on your PC while the phone is rooted and booted on the android OS. Since you cannot boot into recovery and also can't boot into android itself, I don't think you would be able to back it up.
If you ever installed a custom rom with AROMA, there is a chance you have it backed up already. But if you don't explicitly remember...

vladeco said:
EFS is a part of the system that stores your serial number, IMEI and everything related to your phone specifically. You are generally able to back it up using a custom recovery or using software on your PC while the phone is rooted and booted on the android OS. Since you cannot boot into recovery and also can't boot into android itself, I don't think you would be able to back it up.
If you ever installed a custom rom with AROMA, there is a chance you have it backed up already. But if you don't explicitly remember...
Click to expand...
Click to collapse
Ah ok,
I will give the guide a go and let you know how i go.
Thanks again

I get the error message write operation failed in ODIN, i am guessing that means its dead.
Do you happen to know if i take it back to my phone company to fix if they will be able to tell i had rooted it
on the download screen i have
Current binary samsung official
My system status is custom
could they tell anything from that?

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it

[Q] stock/no root phone won't boot, only DL mode works

Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.

korarchaeota said:
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
Click to expand...
Click to collapse
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk

Thank you for your reply. Where did you obtain a rom that could boot from the external sd card?
wrenhal said:
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Click to expand...
Click to collapse

Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

shortydoggg said:
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried it with only F. Reset Time checked, it installs it and says a green Pass!. I then unplugged it, tried to hold volume up + menu + power buttons for a while but nothing happened. I pulled the battery and then did volume up + menu + power buttons and went straight back to dead android guy. Any ideas?

Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

shortydoggg said:
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!

korarchaeota said:
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
Click to expand...
Click to collapse
No there's no Odin flash-able there.
Sorry, we don't seem to have any answers for your problem. It seems like it may be more of a hardware issue than software.

Did you phone boot after flashing stock 4.04?

audit13 said:
Did you phone boot after flashing stock 4.04?
Click to expand...
Click to collapse
Yes it did, the first time that this started happening. But I was unable to do that again, I thought since I flashed all the way to 4.3 and I read that once you go to 4.3 you can't go back. Is that correct?
Thank you for your help. I was hoping to try an odin flashable touchwiz 4.3 but I can't seem to find one.

So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233

audit13 said:
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!

korarchaeota said:
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
Click to expand...
Click to collapse
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.

audit13 said:
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
Click to expand...
Click to collapse
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??

korarchaeota said:
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
Click to expand...
Click to collapse
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.

audit13 said:
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
Click to expand...
Click to collapse
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!

korarchaeota said:
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
Click to expand...
Click to collapse
Nope, USB debugging will not make a difference.
The latest Philz Touch is based on the latest CWM. After your flash Philz, are you letting the phone auto reboot on its own after flashing in Odin?
I know of no way to convert a custom ROM so it can be flashed in Odin.

Complete noob thinks he may have softbricked his phone

Hi guys. Brand new to this whole rooting thing. Long story short, I rooted my device (Galaxy S3 sgh-t999) a while back and was just living off stock touchwiz just with all the bloatware deleted. I had the most recent version of TWRP installed and my recovery was based on that. I then downgraded TWRP to 2.3.3.0. It asked me to reboot and I did so. Now I'm stuck at the Samsung logo screen but it doesn't get past that. The device seems to boots up, but the moment the little Samsung jingle starts to play (you know the swirly blue mist that encompasses the Samsung logo), it stops in the middle of the jingle and the phone won't get passed it.
I tried rebooting back into TWRP via up, home, power and was able to get into TWRP recovery good enough, I can access everything in the menu and tried wiping dalvik, cache, factory reset and system and restored from my backup, but upon trying to restore from my custom backup, it just stalls on the Samsung logo screen. Any ideas if this is fixable? Sorry if this is in the wrong forum guys.
Also, I should make mention that whenever I try to hard power off my phone by holding down the power button, it turns off for a moment then boots back on again. I actually have to remove the battery in order for the phone to turn off. Don't know if that helps.

That's normal when you hold the power button down. It's a hard reset so it's supposed to boot back up.
As for your other issues, why did you downgrade twrp? If your backup was made with another version I suggest using the same to restore it.
Most of the time a factory reset will fix this type of problem, but it sounds like we are beyond that now. If the restore and another reset don't work, go to my firmware thread (sticky in development) and download the same or newer firmware as what you had before. Flash via Odin and factory reset from the stock recovery. ( This will wipe the internal sd)
That should get you going again.
For the future, please do not ever manually wipe /system. You could end up with no O/S to boot into and a hell of a headache! There is simply no benefit to doing so. Only risk.
Let me know if you have any other questions.
Good luck!
Sent from my SGH-T999 using Tapatalk

I downgraded TWRP because I was having issues flashing a new ROM. Every ROM I tried flashing came up with an error and people said they were most successful with 2.3.3.0 so I tried it out. I suspected it might have screwed something up but stupid me always has to be sure. I would try and re-use an upgraded TWRP version if possible but I don't think I can access that from the TWRP menu itself and that's just about the only function my phone has at this point. Just booting into TWRP and playing around with the menu.
Do you have a link to your thread? Thanks for the time by the way.

The link should be in my sig. But it's stickied at the top of the development section. Can't miss it.
If you go to twrp's Web page you can download a newer one in .zip format and flash from your current version.
Or get the .tar.md5 one and flash from Odin.
In the newer versions you can actually flash the .img file itself. After choosing install and are browsing for the file, look for a button to use the .img.
I don't believe this is available in the older ones though.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
The link should be in my sig. But it's stickied at the top of the development section. Can't miss it.
If you go to twrp's Web page you can download a newer one in .zip format and flash from your current version.
Or get the .tar.md5 one and flash from Odin.
In the newer versions you can actually flash the .img file itself. After choosing install and are browsing for the file, look for a button to use the .img.
I don't believe this is available in the older ones though.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
You are a LIFESAVER! I was sure I messed something up permanently that would cause me to have to get a new phone. THANK YOU THANK YOU THANK YOU!

You're welcome! Glad I could help! So I take it you've got it up and running again?
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
You're welcome! Glad I could help! So I take it you've got it up and running again?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yup! It was really a simple matter of updating TWRP via Odin. I don't know why it never crossed my mind to use it. Maybe I'll have more luck using different ROMs through Odin instead of TWRP as well.

Odin is really only just for flashing full firmware for updates and returning to stock, and for flashing recovery. Pretty much everything else (all custom roms, for example) is meant to be flashed in a custom recovery like twrp. If you're ever unsure, reread the op of whatever you're flashing, and if your answer isn't there feel free to ask about it.
In a nutshell: Odin only flashes .tar and .tar.md5 files. Recovery flashes .zip.
I do highly recommend an app called Mobile Odin by chainfire. Search xda for his thread and make sure you read all the info if you're interested. It can make flashing super easy!
Sent from my SGH-T999 using Tapatalk

I am having a similar issue. I have never modified any of the original specs and this is a new issue as of 48 hours ago. In short, my device was on, auto shutdown and then froze on the Galaxy S3 load screen. Attempts to boot in recovery,safe, and soft/hard reset have not worked. I can access Odin mode. After reading the above thread I went to the link you suggested and went directly to the firmware my SGH-T999 started with(T999UVDLJA) and worked my way up the list to see if any of them would take. Unfortunately none achieved a 'PASS' via Odin. So, my question is, what do you do when all the steps have been followed and the firmware doesn't work. Any help would be greatly appreciated.

What error are you getting in Odin?
Do you see anything about warranty bit on the download screen? If you are, the flash is probably failing because you are trying to flash old firmware over new firmware. I suggest flashing the latest firmware for your T999 from here: http://www.sammobile.com/firmwares/database/SGH-T999/