Related
Hi mates. I have a weird problem. Just last night I am restoring a Nandroid Backup of VANIR ROM for geehrc, which DONT have a problem with my phone. When suddenly after booting and showing the lockscreen, the phone becomes unresponsive and after a few seconds, turns off. After that, It wont boot, even fastboot or recovery wont show up. Even tried the hard reset combo, but to no avail. Download mode works, but I have not tried to flash KDZ yet. Also when I plug in the charger, LG logo shows up then a blank grayish screen, then a battery icon with charging animation, plus a label that says 0% charging. I leave it for about 4 hours, thinking that the phone might just depleted the battery. But still it wont turn on. When I turn it on while plugged in, the LED blinks in red color. The blinking is continuous. What seems to be the problem? Is it hardware or software issue? Please help me guys! :crying:
Any help mates?
Im really loosing my hope reviving my device. Tried different methods from the web. I just flashed KDZ, but the phone keeps flashing the LG logo when plugged in. When I unplug the charger, and power on the phone, nothing happens! Damn. Can anyone give an insight on what might cause the problem? Thanks in advance!
Sorry to hear about your troubles! Honestly, I have no idea what could have caused this, but if I had the same issue, and nothing worked as you described, I would probably crack the phone open, disconnect the battery and just let it sit for a day or so. Then reconnect it, and try powering up again (might need to charge it first). Who knows whether it helps or not, but it definitely wouldn't hurt, and you don't seem to have a lot of options right now...
It's interesting that the download mode still works. The common wisdom says that you should be good after flashing stock KDZ, but your experience shows otherwise...
i've experienced it before. It happen due to your battery is out of charge. What i do is, i open the case, pullout battery and install back.
After that i charge the phone. And voila...charge is on..and my hp on too. :good:
kt-Froggy said:
Sorry to hear about your troubles! Honestly, I have no idea what could have caused this, but if I had the same issue, and nothing worked as you described, I would probably crack the phone open, disconnect the battery and just let it sit for a day or so. Then reconnect it, and try powering up again (might need to charge it first). Who knows whether it helps or not, but it definitely wouldn't hurt, and you don't seem to have a lot of options right now...
It's interesting that the download mode still works. The common wisdom says that you should be good after flashing stock KDZ, but your experience shows otherwise...
Click to expand...
Click to collapse
Thanks for your feedback! It's really weird. I have flashed 3 KDZ's already. From Original F180K to E975. Nothing. Other option I have aside cracking it open is returning it to the seller fro check up. But that's the last resort. I suspect something got "unglued" while I am using it. Since the device got really hot before it happened.
mark_vyz said:
i've experienced it before. It happen due to your battery is out of charge. What i do is, i open the case, pullout battery and install back.
After that i charge the phone. And voila...charge is on..and my hp on too. :good:
Click to expand...
Click to collapse
Will definitely try this. Thanks for the advice. How long should I remove the battery?
I just removed for a second and put it back. Most probably due to battery not fit. So i just retighten it.
Sent from my LG-E975 using xda app-developers app
MitoTakatori said:
Will definitely try this.
Click to expand...
Click to collapse
Should you go ahead with it, and in case you've never opened an OG before, just a little advice... It's not difficult, but you need to watch for a couple of things:
1. Make sure you remove the SIM tray BEFORE removing the back cover.
2. Start opening it from the bottom (after removing two screws), and work your way along the sides to the top. When putting it back together, go in reverse (top to bottom).
3. Be careful around the SIM slot and the buttons when prying the cover open -- it's easy to break a thin "bridge" on the side of the cover. Just don't push on those areas.
4. When putting the cover back on, it might be a bit tricky to hold power and volume buttons in position. The easy trick is to use a piece of scotch tape on the outside, so they don't fall in.
Good luck!
kt-Froggy said:
Should you go ahead with it, and in case you've never opened an OG before, just a little advice... It's not difficult, but you need to watch for a couple of things:
1. Make sure you remove the SIM tray BEFORE removing the back cover.
2. Start opening it from the bottom (after removing two screws), and work your way along the sides to the top. When putting it back together, go in reverse (top to bottom).
3. Be careful around the SIM slot and the buttons when prying the cover open -- it's easy to break a thin "bridge" on the side of the cover. Just don't push on those areas.
4. When putting the cover back on, it might be a bit tricky to hold power and volume buttons in position. The easy trick is to use a piece of scotch tape on the outside, so they don't fall in.
Good luck!
Click to expand...
Click to collapse
Thanks a lot for the tip! Actually I already opened it, only problem left is the battery. How can I remove it?
MitoTakatori said:
Thanks a lot for the tip! Actually I already opened it, only problem left is the battery. How can I remove it?
Click to expand...
Click to collapse
I wouldn't suggest actually removing the battery, unless you absolutely have to. It's mounted by a double-sided adhesive tape, so taking it out is a bit tricky. My idea was just to disconnect it. You need to undo two screws that secure the power connector, right below the camera flash. The screws are under the plastic tape, just peel it off. When you remove those screws, carefully pull the connector up. That's it. Check the contacts for any signs of damage or corrosion, and clean up as needed. When reconnecting it, push firmly to make sure it sits properly.
kt-Froggy said:
I wouldn't suggest actually removing the battery, unless you absolutely have to. It's mounted by a double-sided adhesive tape, so taking it out is a bit tricky. My idea was just to disconnect it. You need to undo two screws that secure the power connector, right below the camera flash. The screws are under the plastic tape, just peel it off. When you remove those screws, carefully pull the connector up. That's it. Check the contacts for any signs of damage or corrosion, and clean up as needed. When reconnecting it, push firmly to make sure it sits properly.
Click to expand...
Click to collapse
Nice tip again! Thanks! Now I don't have remove the battery. Only problem left is finding the small philips screw driver. Haha. Hoping that this solve the problem. If not, bye LGOG.
Thanks for all the helm mates! My LGOG is back in action!! Thanks again! :laugh: :good:
MitoTakatori said:
Thanks for all the helm mates! My LGOG is back in action!! Thanks again! :laugh: :good:
Click to expand...
Click to collapse
Great to hear! Congrats!
kt-Froggy said:
Great to hear! Congrats!
Click to expand...
Click to collapse
Now I am running Mokee's latest build. And will flash again VANIR. Thanks again guys. Thought I have to buy a new phone.
hi, same problem... but i must search at home if i can find a tool to open the screw... i only have - and + in this size and didnt work i miss my phone ((
ok. worked for me fine! Thanks!
now 80% battery instead of 0% very cool
and now i know how it looks into the phone very good working LG...
No more charge stuck on 0% sulation
when I plug in the charger, LG logo shows up then a blank grayish screen, then a battery icon with charging animation, plus a label that says 0% charging. I leave it for about 4 hours, thinking that the phone might just depleted the battery. But still it wont turn on.
SOLUTIONS:
1st take battery out of cell.
Leave in direct sun light for 1 hrs.
Clean battery pin with soft brush.
Charge battry manualy by Desktop charger about 2 to 3 hrs.
Put battery back in phone and start charging.
It will done Insha ALLAH.
I just got this tablet (to replace the garbage SGH-I467) a few days ago (Thu., May 15th). For the first couple of days it worked like a dream. However, the last 4 nights/3 days, I have been encountering some strange issues. What I will do here is describe the issues I've been having, what I have done in attempts to fix them, list some of the things I think may have caused it, and include any additional info/questions.
Before all that though, I would like to mention that I am not a developer, but I am a bit 'tech savvy' and am more familiar with/knowledgeable of technology than the average user. Also, I have spoken with Samsung tech support and even had the support guy access my Tab Pro 12.2 remotely (I will explain what I learned from that below). So, without further ado (I apologize in advance for the long winded nature of this post, but I want detailed):
The Issues:
1) Screen "flickering"—By flickering I mean that it is shutting off and turning on rather rapidly and sporadically, though inconsistently.
I first encountered the problem 3 days ago (the 18th).
Four nights ago (the 17th), before going to bed, I plugged the device into the same outlet I have used for all my mobile devices, when I woke up (on the 18th) the screen was doing exactly what I described. I hit the home button a few times and it stopped.
That night (the 18th) I plugged it back in to the usual spot before going to bed. The next morning (yesterday, the 19th), the screen was "flickering" again. I tried to press the home key a few times, as well as both the soft keys, nothing. In between "flickers" you can see the lock screen, where I have to enter a pin, but even while visible I can't type anything. So this time, to try to solve the problem, I held the power button + volume up to get to recovery and wiped the cache partition, rebooted the device, and viola, it worked again. Thinking that I may have to factory reset the device if the problem persists, I used Kies to backup all my data. I used the tablet the rest of the day, even plugged it in (in a different outlet than the one next to my bed) for a while and had no issues.
Last night (the 19th) I did pretty much the same thing, but this time, thinking that it might be an issue with the device getting too much power (the Quick Start Guide says: "Note: Connecting the travel adapter improperly may cause serious damage to the device."), I used a travel adapter from one of my other, USB 2.0 devices (the only difference between the adapters is the output: 2.0 = 5.0V—2.0A vs. 3.0 = 5.3V—2.0A, and output was specifically what I was concerned with). This morning (the 20th) the problem has returned, but now includes my second issue: the hard home button and both soft keys, back and recent apps, no longer function. So I immediately tried to wipe the cache partition and reboot, but this time it didn't work. Thankfully I had anticipated this yesterday and had that Kies backup, so I wiped the entire device back to factory settings. But alas, it was unsuccessful and the problem persists, including the loss of button functionality, with the exception of the power and volume buttons.
It is important to note that when I first got the Tab Pro 12.2 and set up the lock screen, I used the option that delays the actual locking of the device 10 minutes after screen timeout, but set it so that if I lock the screen with the power button it ISN'T delayed and immediately locks. That being said, a couple of times when the "flickering" stopped long enough to momentarily use the device, I was able to enter my pin and unlock. But when the screen starts flickering again, it locks the device, so the power button must be affected as well. Though since the first factory reset of the device, I haven't set up a pin. I have done several factory resets and none of them have worked. The best result has simply been limited (no back, recent apps or home key) and momentary functionality. I tried using Kies to do emergency firmware recovery, but every time I click the option it disconnects the device.
When Samsung tech support remotely accessed by device (I used one of the momentary functionality windows to download the required application) the agent was able to utilized soft and home key functionality, even though I couldn't. This tells me that it was hardware related, not related to UI/software.
So there are a couple of things I think may have caused/contributed to the problem:
The first, which I vaguely touched on above, is the power issue. Perhaps I have shorted the device out somehow. The outlet I use to charge things while I'm sleeping is on the wall behind my bed, so I have to use a common extension cord, one that has 3 outlets at the end. I have a light plugged into that and in the past have charged both my SGH-I467 (AT&T Note 8.0) and my SGH-I747 (AT&T S4 Active) with that cord and outlet. That is the only place I have charged the SM-T900 overnight, but none of the other power sources I have used have caused these issues.
The second possibility is a virus some sort. I have never used the Samsung app store on any of my other devices, but in order to update the Hancom Office suite I had to. Since I had an enjoyable time using it to that end, I decided to see what else I could find on Samsung's store. I downloaded a couple of things (the "Official Captain America game" and a couple wallpaper/theme apps) and was looking around the store to see if there was anything else I wanted to download. I found several apps that had reviews claiming they were trojans, so I immediately checked the reviews for the apps I had downloaded, but none of them had similar reviews. However, that does not mean they didn't have viruses.
So, what do the resident Android gurus of XDA think about these issues?
I tried searching all over the forums and elsewhere online for people having the same issues, but couldn't find anything. Have any of you ever encountered something similar to this?
Until recently, I hadn't ever heard of anyone getting a virus on an Android device. Are they common? What is the nature of Android viruses?
If these issues do have something to do with overcharging/shorting the device, how can I mitigate that problem? Tonight when I charge the tablet, instead of using the USB 3.0 charging cable, I am going to try just using the 2.0 cable. As I understand it, that can be done by simply plugging it into the right side of the port. Hopefully that will stop exacerbating the problem.
Again, I apologize for such a long winded post. I would like to thank you all in advance. If ever I have problems with an Android, you guys are the ones to ask!
*UPDATE* Before I started typing this I was attempting to run the Kies 'Firmware Upgrade and Initialization', as opposed to 'Emergency Firmware Recovery', to see if that too would disconnect the device. Unfortunately it said that my device needed to be charged first. So I shut it down and plugged it into a surge protected strip and began typing this post. Occasionally I would go over an check the charge. While it was shut down and charging I was able to use the home key to bring up the green battery. Once the charge looked like it was about 75% complete I turned it back on and lo and behold, the "flickering" issue looks resolved and so does the button issue. I can go back, enter the recent apps and task manager, and use the home key functions. For how long this will last, however, is unknown. I guess we'll see in the morning. I'll post what happens tomorrow.
What kind of case are you using? Some users have seen issues with some cases that use magnets for auto-sleep-wake. When the front of the cover is flipped back behind the tablet, the magnets seem to activate the auto-sleep feature
Sent from my SM-P900 using Tapatalk
RE: Case?
dodo99x said:
What kind of case are you using? Some users have seen issues with some cases that use magnets for auto-sleep-wake. When the front of the cover is flipped back behind the tablet, the magnets seem to activate the auto-sleep feature
Sent from my SM-P900 using Tapatalk
Click to expand...
Click to collapse
I am not using a case or cover at all...
same issues here
Sounds exactly as the same issue I have had the last week. I have done several factory resets triad to avoid installing as many applications as I had prior the factory reset (to see If it was an app causing the issue). No solution yet but I will try your way with kies described above. I have a tab pro 8.4.
VeinkWiles said:
So, what do the resident Android gurus of XDA think about these issues?
Click to expand...
Click to collapse
I am no guru, but it sounds like a loose connection. Maybe it is affected by temperature. Try it on a (not too) hot water bottle or on freezer packs.
Mike Austin said:
I am no guru, but it sounds like a loose connection. Maybe it is affected by temperature. Try it on a (not too) hot water bottle or on freezer packs.
Click to expand...
Click to collapse
It's not overheating. It can get warm, but it's never gotten hot. And I've had other devices that have seriously overheated and still functioned, albeit slowly.
**UPDATE**
After I got it working the night I originally posted I let it fully charge (it's important to note that I got it up to about 75% while it was off; green battery the only thing on the screen, and I had home button functionality), then disconnected it and disabled all the radios, put it in power saving and left it over night without power. Doing that I was able to use it all day yesterday. But while I was full-charging it, after it reached 100%, I noticed that it started acting up almost immediately. The sound was on and kept making the lock screen sound (that's how I noticed it from across the room). So it is tied to the power/lock key. But disconnecting it before it could get out of control mitigated the problem. Last night I was going to try to charge it over night with USB 2.0, but I fell asleep before changing the cable out, so it charged on 3.0 all night and is back in poor repair. I'm currently trying to full charge it while off to see if that gives me functionality again.
Either way, each time I fix it the solution becomes more difficult/timely than the previous one. It's clearly not getting better, so I'm going to have to send it in to repairs.
Sent from my SAMSUNG-SGH-I537
VeinkWiles said:
It's not overheating. It can get warm, but it's never gotten hot. And I've had other devices that have seriously overheated and still functioned, albeit slowly.
**UPDATE**
After I got it working the night I originally posted I let it fully charge (it's important to note that I got it up to about 75% while it was off; green battery the only thing on the screen, and I had home button functionality), then disconnected it and disabled all the radios, put it in power saving and left it over night without power. Doing that I was able to use it all day yesterday. But while I was full-charging it, after it reached 100%, I noticed that it started acting up almost immediately. The sound was on and kept making the lock screen sound (that's how I noticed it from across the room). So it is tied to the power/lock key. But disconnecting it before it could get out of control mitigated the problem. Last night I was going to try to charge it over night with USB 2.0, but I fell asleep before changing the cable out, so it charged on 3.0 all night and is back in poor repair. I'm currently trying to full charge it while off to see if that gives me functionality again.
Either way, each time I fix it the solution becomes more difficult/timely than the previous one. It's clearly not getting better, so I'm going to have to send it in to repairs.
Sent from my SAMSUNG-SGH-I537
Click to expand...
Click to collapse
Sorta sounds like a screen grounding problem. I had a nexus seven with this issue and the charger seemed to really make it act up. Needless to say I gave that to my wife and bought this. If the digitizer is not grounded properly it will act up.
Turning on developer settings and set it to show touches on screen. See if when charging the screen registers more touches than you are doing.
Sent from my SM-T320 using Tapatalk
Re: developer settings; display touches
dottat said:
Sorta sounds like a screen grounding problem. I had a nexus seven with this issue and the charger seemed to really make it act up. Needless to say I gave that to my wife and bought this. If the digitizer is not grounded properly it will act up.
Turning on developer settings and set it to show touches on screen. See if when charging the screen registers more touches than you are doing.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
Damn! That's an outstanding idea! The only downside is that last night I sent the tablet to Samsung's repair department, so I can't test that out. But once I get it back, if the problem persists I will definitely be doing that first. Thanks for the advice dottat.
Fw:Re: developer settings; display touches
mikegbg said:
Sounds exactly as the same issue I have had the last week. I have done several factory resets triad to avoid installing as many applications as I had prior the factory reset (to see If it was an app causing the issue). No solution yet but I will try your way with kies described above. I have a tab pro 8.4.
Click to expand...
Click to collapse
Hey dude, check out dottat's reply. He's got a really good idea that may shed some light on the source of the problem. Unfortunately, I can't try it out. If you do it, let me know how it goes. Maybe you can take some screenshots? Either way, hopefully you can get something out of it.
A while back i used to "try" to root stuff. I sucked at it BAD. Anyway, I have a Galaxy Note 8.0 (GT-N5110) that I had rooted to a certain point (very superficial) and I just kept it the way it was, that way I could use Multi-window for any app. This morning I unplug my tab from the charger only to be disappointed that it will not turn on. Ive tried different power outlets, different cables, different base chargers, even the whole "power+vol_up+home" thing... nothing. I never updated the tab when Kitkat came through the pipeline. Im freaking out that a new major update automatically happened overnight or something. Im sorry to trouble you all, but does anyone have suggestions? Since it's rooted I can't take it to Samsung or Best Buy. Honestly if I could just get it back to stock, that would be awesome, but im more concerned about getting it to simply turn on. Any Ideas?
If your device is rooted you won't get an OTA update so that could not be the problem. You can try to unplug battery (mus open the device)"and see what happened. Maybe your battery is faulty or someting else.
K... I appreciate it Ill take a look. But, lets say I actually open it (without making things worse), how do I determine if the battery is in fact faulty? If it is, can I get a replacement? preferably an official samsung one.
EDIT:
Scratch that. Sry, Im just always scared of doin stuff, so I always feel like I have to ask the question, but I'll look it up. Im confident at least this should be easy enough for me to do Thank you again.
The problem with this device is you cannot pull out the battery easily. Maybe after that steps it boots up again.
Battery removal wasn't bad... now I'm just waiting for a new one (ordered on ebay, crossing fingers hoping it was legit). What did you mean "after that steps it boots up agin."? Will the tablet boot up without the battery if it's plugged in or something?
varxtis said:
Battery removal wasn't bad... now I'm just waiting for a new one (ordered on ebay, crossing fingers hoping it was legit). What did you mean "after that steps it boots up agin."? Will the tablet boot up without the battery if it's plugged in or something?
Click to expand...
Click to collapse
Wow, that suck. sorry for you man. For now, try to plug the tablet to a computer and while device manager opened and see if there is change. If the change say "qhsusb" or something along that line and not your model number . . . changing battery wont do anything because it's already hard bricked. if not, finger cross.
varxtis said:
What did you mean "after that steps it boots up agin."? Will the tablet boot up without the battery if it's plugged in or something?
Click to expand...
Click to collapse
No. But sometimes after this step and reconnecting the battery the device boots up. Also a battery calibration is done.
I tried plugging in the tablet to the computer with the old battery and then without any battery. Neither one prompted anything in the device manager. Today I got the new battery (assuming its legit and in good condition) in the mail. I plugged it in, and nothing. Plugged the tablet with the new battery to the wall charger, nothing. Plugged the tablet with the new battery to the computer while running device manager, nothing.
I'm going assume that the new battery is dead and let it stay connected to the wall charger for 8+ hrs, and see if there are any changes.
I just really don't understand what the deal is and why this would randomly happen. Ive never had problems with the firmware or anything. I have felt like there was an issue with the battery being that it doesn't seem to be keeping much of a charge... but for it to just Hard Brick like this seems so out of the blue. Can anyone provide me with additional suggestions please?
Maybe I'll ask it this way...
Is there any way to test if the batteries are food? That way I can at least determine if the tablet is in fact hard bricked or just bad batteries.
Might not be what you want to hear, but if different cables, chargers and batteries don't work, then maybe there was a power surge overnight while the device was plugged into the wall that took out the device (I once lost a computer that way and now I only use surge suppressors (note that not all power bars are proper surge protectors! See here: http://en.wikipedia.org/wiki/Surge_protector ) that are UL 1449 certified with a low clamping voltage and high energy absorption rating as a minimum; the fancier ones can even tell you if your wall outlet has a grounding problem). Or your tablet's USB port is broken, but that doesn't make sense based on what you've said thus far. Or you're just super-unlucky and all of your replacement parts are also faulty (it could happen). Either way, I've got my fingers crossed for you!
In the meantime, a multimeter would be able to tell if the batteries hold a charge, and whether or not power flows to the device when the battery is attached or the device is plugged into the wall or computer.
Just make sure you read up on how to use one first so you don't accidentally electrocute yourself:
https://learn.sparkfun.com/tutorials/how-to-use-a-multimeter
rtiangha said:
In the meantime, a multimeter would be able to tell if the batteries hold a charge, and whether or not power flows to the device when the battery is attached or the device is plugged into the wall or computer.
Just make sure you read up on how to use one first so you don't accidentally electrocute yourself:
Click to expand...
Click to collapse
Ill definitely be looking into this option in depth tomorrow, and deeply appreciate it. At least it's something. T_T I don't want my tablet going to electro grave. This sucks so bad. This has been a month from hell
First my printer decides its time to start printing crooked over a couple of months, getting so bad that it jams up a few weeks ago, requiring me to get a new printer, which has been a fiasco in and of itself that still hasnt been resolved. Ive gone through 4 printers in one week, all of them different model printers, all from HP, and each and every one of them defective.
Then my laptops video card tweaks out because of installing Splashtop Stream, which starts a domino effect requiring me to do a factory reset on the laptop.
Then my Tablet just decides to kill over.
Then my Microsoft Arc mouse decides it doesn't the want to wheel to work requiring me to purchase a new one, and when I receive it, the cover for the battery compartment is missing and the wheel click is defective. It took 2 and a half weeks to resolve
Then I get bronchitis.
all in less than a month.
Alright, ya... it's dead. Oh well. Here's me trying to make the most of it: are there any places that buy bricked tabs? I figure the parts have to have some sort of salvage value.... maybe.
You can't go to a Samsung service shop? They might not fix it under warranty, but I assume they'll have a look at it and give you an estimation? I feel for you, we all have had these awful weeks... I soft bricked my pad, my computer started to play up, my other computer decided it wanted to die after years of hard work and not skipping a beat, my son got the flu, the missus was on her monthly(grumpy wife..take cover), and when I took a break from it all on the toilet I found that we had run out of paper! To make matters worse, my favorite football team lost from a second division team.. This all happened in one single day! So chin up, it might take a week, but when all it's fixed again you'll experience deep appreciation for the things you have taken for granted.... (xda fixed my tablet, time fixed my wife)
Sent from my GT-N5100 using XDA Free mobile app
Sry for delayed response.
Im very very doubtful that Samsung will help. I have two more... ideas, before I go to Samsung. Non-invasive of coarse, wouldn't want to make matters worse.
K, So first off I took the tablet with extra battery to a tech place in the area that said the batteries are fine, but when they put a multimeter to the motherboard nothing came back. Basically its dead according to them. There's one more shop in the area I want to get a second opinion from. Next, does anyone know anything about an app called "Splashtop Stream"? I'm a fond user of Splashtop to control/view my computer straight my tablet, but when I installed "Splashtop Stream" to use the tablet as an extended screen (not just a cloned second screen), my tablet and both computers I tried it with did NOT like it. I immediately uninstalled it, but it dawned on me that it was just a matter of days later that my Tablet died. I hate to grasp at straws, but if an app like that is too resource intensive, I'm okay with seeing a connection that it fried my tablet. I can't just ask Splashtop "Hey, does your app fry motherboards", so I need a way of researching legitimate known problems. I can't afford a $400 tablet right now.
The reason why I'm using Samsung as a last resort is because it's outside my warranty time, and the moment they know that I did even the simple fast-mod on it, they'll slap it down and won't help. There no custom boot or Roms on it.
With all this said, any suggestions anyone?
misternagoya said:
You can't go to a Samsung service shop? They might not fix it under warranty, but I assume they'll have a look at it and give you an estimation? I feel for you, we all have had these awful weeks... I soft bricked my pad, my computer started to play up, my other computer decided it wanted to die after years of hard work and not skipping a beat, my son got the flu, the missus was on her monthly(grumpy wife..take cover), and when I took a break from it all on the toilet I found that we had run out of paper! To make matters worse, my favorite football team lost from a second division team.. This all happened in one single day! So chin up, it might take a week, but when all it's fixed again you'll experience deep appreciation for the things you have taken for granted.... (xda fixed my tablet, time fixed my wife)
Sent from my GT-N5100 using XDA Free mobile app
Click to expand...
Click to collapse
O_O That does suck!! Sry man.
varxtis said:
Sry for delayed response.
Im very very doubtful that Samsung will help. I have two more... ideas, before I go to Samsung. Non-invasive of coarse, wouldn't want to make matters worse.
K, So first off I took the tablet with extra battery to a tech place in the area that said the batteries are fine, but when they put a multimeter to the motherboard nothing came back. Basically its dead according to them. There's one more shop in the area I want to get a second opinion from. Next, does anyone know anything about an app called "Splashtop Stream"? I'm a fond user of Splashtop to control/view my computer straight my tablet, but when I installed "Splashtop Stream" to use the tablet as an extended screen (not just a cloned second screen), my tablet and both computers I tried it with did NOT like it. I immediately uninstalled it, but it dawned on me that it was just a matter of days later that my Tablet died. I hate to grasp at straws, but if an app like that is too resource intensive, I'm okay with seeing a connection that it fried my tablet. I can't just ask Splashtop "Hey, does your app fry motherboards", so I need a way of researching legitimate known problems. I can't afford a $400 tablet right now.
The reason why I'm using Samsung as a last resort is because it's outside my warranty time, and the moment they know that I did even the simple fast-mod on it, they'll slap it down and won't help. There no custom boot or Roms on it.
With all this said, any suggestions anyone?
Click to expand...
Click to collapse
I randomly bumped here and I'm no expert, but if your tablet's motherboard is indeed dead, I believe there is absolutely no way they can tell that the device got rooted at some point. You did not "hard brick" it, that's a whole other thing, or at least so I've learned in my not-very-long experience. "Hard brick" should be the result of flashing a kernel made some other device, which definitely is not your case. Moreover, that does not kill the motherboard, it just makes anything unbootable: it's a software problem, so it can actually be detected. You had a hardware failure that most likely completely wiped any proof that you have ever modified your device, so the only problem that you might have, I think, is them telling you that they take no responsibility for what your power outlet has done to the device, but they shouldn't be able to detect any modification that you have made. In my opinion technical support is worth trying.
Awesome!! Thank you so much!
varxtis said:
Awesome!! Thank you so much!
Click to expand...
Click to collapse
You're welcome, good luck!
Just thought Id let everyone know that I managed to get Samsung to compromise on the matter since the Tablet is only 5 months past warranty (1yr 5mnths since purchase). So, not much longer and hopefully Ill have a tablet that works yet again.
I dropped by tablet battery down once and now every so often the screen flickers with vertical lines and this is followed by loss of network and the thing reboots.
I've read this to be a battery problem.
Warranty is still active but I've rooted it and my Knox counter has gone up.
What do you think XDA? Just get a replacement battery?
NightShadow02 said:
I dropped by tablet battery down once and now every so often the screen flickers with vertical lines and this is followed by loss of network and the thing reboots.
I've read this to be a battery problem.
Warranty is still active but I've rooted it and my Knox counter has gone up.
What do you think XDA? Just get a replacement battery?
Click to expand...
Click to collapse
If you have the ability, since it was dropped, I would open it and make sure connection is tight to battery and screen. Then if it still acts up, get a battery. Several people had battery issues out of the box. All it turned out to be for a few was a loose connection.
i was thinking about that but i'm afraid of voiding warranty. do i even still have warranty? due to the knox?
flhthemi said:
If you have the ability, since it was dropped, I would open it and make sure connection is tight to battery and screen. Then if it still acts up, get a battery. Several people had battery issues out of the box. All it turned out to be for a few was a loose connection.
Click to expand...
Click to collapse
Well ive opened it up and tightened everything i can see and it seems to work ok for a while, when the charge gets to around 20-30%, the tablet flickers, all mobile connections are lost and 75% of the time, reboots.
So i went ahead and got a new battery. Now this was worse kinda. At random moments, like unlocking the screen, or replying to a message, or maybe just a high cpu load event, the tablet just turns off and is unable to be powered back on without first connecting it to a power supply like a wall charger or a power bank.
The time and date will be reset once its back on and ill have to wait a few minutes before the auto network time setting kicks in before i can use something like whatsapp.
Anyone got any clue what might be causing this problem? Thanks in advance, helpful xdarians.
NightShadow02 said:
Well ive opened it up and tightened everything i can see and it seems to work ok for a while, when the charge gets to around 20-30%, the tablet flickers, all mobile connections are lost and 75% of the time, reboots.
So i went ahead and got a new battery. Now this was worse kinda. At random moments, like unlocking the screen, or replying to a message, or maybe just a high cpu load event, the tablet just turns off and is unable to be powered back on without first connecting it to a power supply like a wall charger or a power bank.
The time and date will be reset once its back on and ill have to wait a few minutes before the auto network time setting kicks in before i can use something like whatsapp.
Anyone got any clue what might be causing this problem? Thanks in advance, helpful xdarians.
Click to expand...
Click to collapse
I'm not by any means an expert or repairman of any kind, just so you know. I'm thinking maybe a loose connection at the terminals on the board the battery connects to or if they use a separate board for the battery to connect to and then to the main board it may be somewhere along in there. Maybe a loose wire going into the tab that connects to the prongs. It sure sounds like something isn't making a good connection. Sounds like a load gets put on it and it and that bad connection can't handle the load.
Might just be you're going to have to send it off...
You may be right. Sounds like a particular connection which does higher load or something. Once i put the tablet in power save mode, the symptoms never reappeared. I dont notice a drastic slowdown in the tablet either. Probably am prolonging the inevitable.
Same Symptoms
NightShadow02 said:
You may be right. Sounds like a particular connection which does higher load or something. Once i put the tablet in power save mode, the symptoms never reappeared. I dont notice a drastic slowdown in the tablet either. Probably am prolonging the inevitable.
Click to expand...
Click to collapse
I am facing exactly same issue what you have described and am in same situation, have tripped Knox on my Tab S 8.4.
I can see that you have been able to suppress the behavior by putting it to Power Saving mode. Have you experienced flicker and reboot since then? I am planning to take it to Samsung store not sure if they will honor warranty, did you tried that?
misrasandeep said:
I am facing exactly same issue what you have described and am in same situation, have tripped Knox on my Tab S 8.4.
I can see that you have been able to suppress the behavior by putting it to Power Saving mode. Have you experienced flicker and reboot since then? I am planning to take it to Samsung store not sure if they will honor warranty, did you tried that?
Click to expand...
Click to collapse
nope, ever since the Power Saving mode solution, it hasnt flickered and rebooted yet. and my warranty was expired by that point so i didnt bring it to the shop. no noticable reduction in performance so far
possible battery connector
NightShadow02 said:
Well ive opened it up and tightened everything i can see and it seems to work ok for a while, when the charge gets to around 20-30%, the tablet flickers, all mobile connections are lost and 75% of the time, reboots.
So i went ahead and got a new battery. Now this was worse kinda. At random moments, like unlocking the screen, or replying to a message, or maybe just a high cpu load event, the tablet just turns off and is unable to be powered back on without first connecting it to a power supply like a wall charger or a power bank.
The time and date will be reset once its back on and ill have to wait a few minutes before the auto network time setting kicks in before i can use something like whatsapp.
Anyone got any clue what might be causing this problem? Thanks in advance, helpful xdarians.
Click to expand...
Click to collapse
I have seen this problems on 2 tablets 10.5 and 8.4 the connector where battery is connected on motherboard gets loose which causes reboots and flicker
Solution in my case was resoldering that connector again
i had the same problem, opened up my tablet, just disconnected the battery, cleaned the contacts, pushed it back, made sure its nice and snug, put it all back together and now battery doesn't drain as fast, no more flickers and reboots!
hmm. i'll have to give it a try. you think this may be something to do with condensation?
Sorry for the bump, but I'm having this issue as well on my S 8.4. Custom ROM. The thing with me is that it's not consistent. One day, it will do it a few times; others, no issues whatsoever. I'll try the suggested if it gets progressively worse.
Hey guys,
Unfortunately our home's tablet (Tab s 8.4 Wifi) has the same problem.
It never did weird whatshowever, but when I flashed a custom rom (which went perfectly smooth actually) the screen flashes and the tablet reboots sometimes.
Now it weird that this never happened before and only when I flashed a custom rom it began showing this behaviour.
I am affraid of opening this tablet, and I guess because of the custom rom there is no warranty left anymore (or can this be bypassed by some terminal trick?)
Also I question myself if this is not a software issue, and that it can be fixed with software or so?
Thanks for answering!
My Fix
Hey Guys!
I might have some surprising news to tell about this "issue".
I saw some unboxing video's and saw at what place the battery connector was placed. It was some sort of a 'push to click' system.
So what I did was the following:
I pushed the tablet at the place of the battery connector. I tried this at various places until I heard a *click*.
Now I don't have this issue anymore. Jay!
I hope this will help you too!
I started to have the same issue on a Tab Pro 12.2, presumably after the battery has lost considerable amount of its energy. Normally I remember this tablet to have a dazzling 10+ hours of usage time. Just after some serious usage time of more than 2 years this issue started, along with increasing temperature and finally reboot. From time to time Android gave a warning message about overheating. From time to time charge values drop big values at a time. From 45 to 20 or 80 to 50. Seems arbitrary. This was happening even when I was on stock, then I switched to some Android 6 stock port from some other tablet. Still the same.
I believe the battery needs replacement. (That's obvious after 18 months, I just mean blinking is related to this) Hope I can find a high quality one cause there are several garbage batteries.
My watch has entered a weird state. Probably after an update but I haven't noticed anything.
While off charger, it just tries to restart all the time. The screen is black and every 10 seconds it does once or twice a short vibration. In one case I noticed it went further with the boot up sequence and occasionally I can see bootloader / fastboot there (dark screen, small colorful text, debug info). This is happening until the battery dies off.
When I put it on charger, it usually starts booting up. It often goes up to the "Installing apps 1 of 20" screen. Very often it restarts itself during this phase but sometimes it goes beyond that and the watch actually starts. I can see the charging indicator and change it colors with swipe.
If removed from the charger, it immediately dies
What's weird that after a while, the charging indicator disappears and is replaced with the actual Android Wear interface I can interact with. I tried to go to settings and hit reset, but it just restarts the watch. Doesn't do the reset.
Usually the longer the watch sits in the charger, the worse the behavior is (ie it's just constantly restarting after a while). I get the best results when I let the battery die and then put it on the charger.
Also the watch is really really warm the whole time.
To me it seems like a software problem. If it was a phone, I'd just invoke factory reset somehow, over the cable or through boot menu. Is there a trick how to do it with the watch as well? Are there any stores with required equipment? I really don't want to send it back.
Same here mate, did you eventually solve it?? How? I really don't want to return it..
nicofit said:
Same here mate, did you eventually solve it?? How? I really don't want to return it..
Click to expand...
Click to collapse
I did not. I used my warranty and sent it back to Motorola. I have a new watch now.
I understand that you don't want to return it. The process was extremely long, painful and annoying. They decided that I'm entitled to get a new watch pretty quickly and sent me a coupon for a new one. I never got that coupon. I spent lots of time calling Motorola trying to find out what was going on and it took a couple of weeks before they found where the mistake was. When they finally sent me the coupon, it was only for the base watch, it did not cover the metal band and the special bezel that my original watch had. So more calls and e-mails to Motorola followed...
Anyway, I know this is the last thing you want to hear but the sooner you accept that your watch is just broken, the sooner you'll get a new one I wish you more luck than I had.
tobice said:
I did not. I used my warranty and sent it back to Motorola. I have a new watch now.
I understand that you don't want to return it. The process was extremely long, painful and annoying. They decided that I'm entitled to get a new watch pretty quickly and sent me a coupon for a new one. I never got that coupon. I spent lots of time calling Motorola trying to find out what was going on and it took a couple of weeks before they found where the mistake was. When they finally sent me the coupon, it was only for the base watch, it did not cover the metal band and the special bezel that my original watch had. So more calls and e-mails to Motorola followed...
Anyway, I know this is the last thing you want to hear but the sooner you accept that your watch is just broken, the sooner you'll get a new one I wish you more luck than I had.
Click to expand...
Click to collapse
You're right, not what I wanted to read... I turned it off now, with the silly hope to wake up tomorrow and see it working again. While leaving it on the charger it became way too warm.
The worst is that this is my wife's watch, and she is even less patient than I am
Damn
Hello,
I have the almost the same issue. Last Friday my watch died randomly when I walked home from work. The screen went black, flashed a bit in different colors and then died. Haven't been able to turn it on since. When I try to charge it, it keeps getting stuck in a reboot loop. I can't do nothing...super annoying. It's been 10 months for me since I bought it but I guess that's out of these "6 months warranty" that then give. Crazy, only 6 months!
Same issue
Does soneone has a solition so far?
wjhessels said:
Does soneone has a solition so far?
Click to expand...
Click to collapse
have you tried getting it on to bootloader whilst on the charger just hold the power button down mine does it sometimes but it boots eventualy