Related
Hi Desi guys & gals.
Here I present to you Latest XXJPY with MODEM & CSC from DDJP6. This way we wiil enjoy the Latest PDA with localized settings.
Although this works, there are certain things to be ironed out. I am working on them. Please wait till I update this post. This works perfectly, while DDJP6 gives you all settings automatically, with XXJPY you need to configure a few things by yourself.
If any of you want to try this ROM & help me with problems, I will be grateful.
Give me some time to update all the necessary information here.
1. Flash Stock DDJP4 if you are on any modded ROMs. Dont bother if you are on stock 2.1.
2. Using Odin Flash this ROM over it. Use 512 pit with re-partition.
Thas all. You now have a pre-rooted phone with custom CWM & lagfix options.
Caution, this will wipe all your data. Please wipe/factory reset before flashing & do a dalvik wipe after flashing, before starting for first time. Titanium Backup works flawlessly for me for Backup & Restore.
-----------------------------------------------------------------------------
Odin3 1.7 with pit files
- Download
-----------------------------------------------------------------------------
XXJPY PDA with SpeedMOD kernel k12c
- Download
Credits go to criskelo for this.
OR
XWJS8 PDA with SpeedMOD kernel k12c
- Download
OR
XFJS2 PDA Stock with SpeedMOD Kernel k12t
- Download
OR
XWJS3 PDA Stock with SpeedMOD Kernel k12p - 500hz
- Download
OR
XWJS5 PDA with SpeedMOD k13a - 500hz
- Download
OR
ZSJPG PDA with SpeedMOD k13c - 500hz
- Download
OR
DDJP6 PDA with SpeedMOD kernel k12k-256hz
- Download
OR
DDJP6 PDA Stock with recovery 3e non-rooted.
- Download
-----------------------------------------------------------------------------
XXJPY stock kernel
- Download
-----------------------------------------------------------------------------
AND
DDJP6 MODEM
- Download
DDJP6 CSC
- Download
-----------------------------------------------------------------------------
Notes :
1. I have found it a safe practice to first flash ONLY the pit file with re-partition. Pull the battery before it restarts, put it into download mode, select PDA, MODEM & CSC, NO pit this time & NO re-partition plug-in the phone in download mode at the last moment & press start.
2. Link to Stock DDJG4
- Download password = samsung-firmwares.com
3. Although its not really documented & thus open to discussion, I have found that Odin3 1.7 is better at NOT semi-bricking your phones. It has helped a few to come out of semi-brick after using Odin3 1.3.
4. This has been tested by me & friends to be working on Intentional Samsung Galaxy S GT-I9000.
5. All questions & clarifications about SpeedMOD should be referred Here
6. Those of you who want to try out STOCK XXJPY, Flash XXJPY kernel over the modded one.
7. I am currently taking a wish-list. Anything Stock is welcome.
8. This thread is located at http://forum.xda-developers.com/showthread.php?t=898104
9. If for some reason you cannot pull the battery in time or similar thing & the phone won't boot, please used VolDn+Menu+Pwr combo to go into download mode.
changelog :
3/1/11 - First Post.
10/1/11 - DDJP6 PDA with SpeedMOD added. Stock DDJPY kernel added.
14/1/11 - Added link to my own post. Check this thread.
2/2/11 - Added JS2.
9/2/11 - Added JS5.
ragin said:
Hi people from the Indian Sub-continent.
Here I present to you Latest XXJPY with MODEM & CSC from DDJP6. This way we wiil enjoy the Latest PDA with localized settings.
XXJPY PDA with SpeedMOD kernel k12c
- http://www.multiupload.com/0361JOIZNR
DDJP6 MODEM
- http://www.mediafire.com/file/ixc1owv3hz7jhtx/Phone-_JP2-Firm-I9000DDJP6.zip
DDJP6 CSC
- http://www.mediafire.com/file/ydk56vottokgad0/CSC-JP5-Firm-I9000DDJP6.zip
Credits go to criskelo for this.
Click to expand...
Click to collapse
Are you certain about this ? I mean, CSC and MODEM File size seems to be very low ????
ragin said:
Hi people from the Indian Sub-continent.
Here I present to you Latest XXJPY with MODEM & CSC from DDJP6. This way we wiil enjoy the Latest PDA with localized settings.
XXJPY PDA with SpeedMOD kernel k12c
- http://www.multiupload.com/0361JOIZNR
DDJP6 MODEM
- http://www.mediafire.com/file/ixc1owv3hz7jhtx/Phone-_JP2-Firm-I9000DDJP6.zip
DDJP6 CSC
- http://www.mediafire.com/file/ydk56vottokgad0/CSC-JP5-Firm-I9000DDJP6.zip
Credits go to criskelo for this.
Click to expand...
Click to collapse
Hi,
Can you kindly provide the PDA without the SpeedMod. The Offiical one. With out any change or mod.
Installation guide please
Hi Ragin, I have a suggestion and request at the same time for you:
Probably the easiest way for your Indian fellows to use and try out any kind of ROM is to do a backup of their APNs while they are still on stock Rom with the following program available for free in the market:
http://www.appbrain.com/app/apn-backup-restore/com.riteshsahu.APNBackupRestore
After having flashed the ROM of their choice they can simply restore the APN settings through the same program and they are immediately online again.
Now my request: as I will travel to India very soon I would like you to backup your APN settings for me with this program and either post the xml file here in reply or PM it to me.
Thanks a lot and cheers from Bali
itenos said:
Hi Ragin, I have a suggestion and request at the same time for you:
Probably the easiest way for your Indian fellows to use and try out any kind of ROM is to do a backup of their APNs while they are still on stock Rom with the following program available for free in the market:
http://www.appbrain.com/app/apn-backup-restore/com.riteshsahu.APNBackupRestore
After having flashed the ROM of their choice they can simply restore the APN settings through the same program and they are immediately online again.
Now my request: as I will travel to India very soon I would like you to backup your APN settings for me with this program and either post the xml file here in reply or PM it to me.
Thanks a lot and cheers from Bali
Click to expand...
Click to collapse
Yes, I am aware of that. I myself did that till today. This ROM is meant for those who want to stick to STOCK roms without any modifications, as the present 2.2.1 ROMs are quite fast & lagfree. And still have the benefit of having their regional MODEM & CSC because of vast number of mobile providers in India.
Those who are using XXJPY stock rom in India can actually try using this ROM & give a feed back about battery use.
Here is my backup of APNs http://www.mediafire.com/?93uexsdw1ywodwf
zion12 said:
Installation guide please
Click to expand...
Click to collapse
Any pit file for this and repartition?
fulcrum1971 said:
Any pit file for this and repartition?
Click to expand...
Click to collapse
Included in the Odin download.
Method posted in note 1.
PS : Post # 1030 for me. I used to love a girl with roll # 1030 when I was in 7th std.
@ragin,
Do you know how to change the locale settings for xxjpy? Meaning since xxjpy is eu-based, I want the locale for my region (SEA) which includes thai and viet languages.
Sent from my GT-I9000 using XDA App
Doesn't work at all.
ragin said:
XXJPY PDA with SpeedMOD kernel k12c
- http://www.multiupload.com/0361JOIZNR
Click to expand...
Click to collapse
Could you explain how do you achieved this? Since SpeedMOD is based on JPX sources...
Thank you in advance.
[[]]
@Ragin
So I ask
Link PDA I9000DDJP6
PDA-JP6-Firm-I9000DDJP6.zip (158.96 MB)
@underv0ltage
Only modifies the. tar adding the new kernel
ragin said:
Here is my backup of APNs http://www.mediafire.com/?93uexsdw1ywodwf
Click to expand...
Click to collapse
Thanks ragin, but your posted file is in a wrong format, it cannot be restored. At first sight I see differences in the Apache disclaimer on top of it and the missing APN counter. Are you sure you used my above mentioned program to backup?
Sent from my GT-I9000 using XDA App
Cool thread boss
Now in Darky's 7.6 but planning to get back to Stock.
Since i am in 7.6(JPY) do i need to use the repartion pit file???
criskelo said:
@Ragin
So I ask
Link PDA I9000DDJP6
PDA-JP6-Firm-I9000DDJP6.zip (158.96 MB)
@underv0ltage
Only modifies the. tar adding the new kernel
Click to expand...
Click to collapse
Thanks a LOT, I will put it in the First post. Is this stock or with speedMod?
fulcrum1971 said:
Doesn't work at all.
Click to expand...
Click to collapse
What doesn't work?
ragin said:
What doesn't work?
Click to expand...
Click to collapse
Tried flashing it two or three times but couldnt. Couldnt flash stock 2.2. Had to flash stock 2.1 to recover it and update to 2.2 through kies. Tried the battery pull out thing too. In one case it got stuck in clockwork recovery and two times it said something like cant mount e........ May be i messed something up.Tried it on both stock 2.1 and 2.2.
Sent from my GT-I9000 using XDA App
fulcrum1971 said:
Tried flashing it two or three times but couldnt. Couldnt flash stock 2.2. Had to flash stock 2.1 to recover it and update to 2.2 through kies. Tried the battery pull out thing too. In one case it got stuck in clockwork recovery and two times it said something like cant mount e........ May be i messed something up.Tried it on both stock 2.1 and 2.2.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I think you got it all wrong, because of that mount e error, you first need to flash a STOCK 2.1 ROM if you are on a 2.2 ROM. Then go into download & flash this 2.2.1 over it. If you are already on stock 2.1, you can flash this ROM directly over it.
Qs
Just out of curiosity, how is this useful? What localization benefits do we get?
ragin said:
I think you got it all wrong, because of that mount e error, you first need to flash a STOCK 2.1 ROM if you are on a 2.2 ROM. Then go into download & flash this 2.2.1 over it. If you are already on stock 2.1, you can flash this ROM directly over it.
Click to expand...
Click to collapse
I was on Darky's & here's what I did. Fired up Odin3 1.7, selected 512 pit, it automatically selects the re-partition for you, put the phone in download mode, connected it to my computer, waited till the com # showed up in Odin, pressed Start. It flashed & showed Pass in green & pulled battery. Fired up Odin again, flashed stock DDJP4. Fired up Odin again, No Pit, Select XXJPY PDA, MODEM & CSC, put my phone in download mode again, connected, & pressed Start when it showed up in Odin. It boots up & I am in XXJPY.
seltaeb said:
Just out of curiosity, how is this useful? What localization benefits do we get?
Click to expand...
Click to collapse
The localization benifits are better wifi, better 2G 3G & better integration with Service Provider's. PDA is universal whereas MODEM & CSC are region specific.
November, 29 2011
Honeycomb-Beta-v3.5 for P1000L/N
Download
Instructions (use P1000LVJJM9 Froyo downgrade)
You can download JM9 ROM here .
__________________________________________
November, 03 2011
New kernel for stock Gingerbread.
Really, It is my first stable release.
Odin/Heimdall or CwM Recovery -> HumberOS
Sources at http://code.google.com/u/humberos/
__________________________________________
August, 21 2011
New ROM version HumberOS-v2.1
Based: JP2 - P1000L
Features
APK e Framework Fully Deodexed e Zipaligned
Root e Busybox
Reboot/Recovery/Download [options on power button]
New battery icons
New Pop-ups
New bootanimation (thanks to Alberto Maciel)
New wallpaper
New kernel version 20111027
Download Here
__________________________________________
August, 21 2011
New ROM version HumberOS-v2.0
Based: JP2 - P1000L
Features
Download Here
__________________________________________
August, 21 2011
I created a place for discussion about P1000L/N in Portuguese language.
[Construí um espaço para discussão sobre os modelos P1000L/N em português]
http://www.humberos.com.br
Kernel Changelog
KERNEL - ChangelogCM7 P1000N KernelJune, 21 2011
CM7 Beta with P1000N gingerbread stock kernel.
Stock P1000N KernelJune, 14 2011
Added CF-Root by binary procedure.
June, 24 2011
Added Ext4 support.
June, 27 2011
New version with Voodoo Lagfix
July, 18 2011
New version with Overcome CwM Recovery v4.1.0.9 + Voodoo Lagfix
Overcome CwM Recovery Updated to v4.1.0.9 (Based off ClockworkMod Recovery v4.0.0.9)
Option under Tweaks to enable/disable shortened backlight fix
Nandroid restore no longer borks the kernel
No more annoying "back button disabled" (Hooray!)
Shortened Yes/No confirmation menus
Make /dbdata wipe when executing "factory reset/data wipe"
Make /emmc/.android_secure wipe when executing "factory reset/data wipe"
Complete restructuring of menus
Streamlining of commands and elimination of some never used features that were cluttering the interface
August, 21 2011
New version with Overcome CwM Recovery v4.1.1.4 + Voodoo Lagfix
Overcome CwM Recovery Updated to v4.1.1.4 (Based off ClockworkMod Recovery v4.0.0.9)
more space
Reserved!
For Changelogs...
....
Instructions and References
CM7 - Cyanogenmod 7
Official Thread
Author: @Technomancer
Reference: Cyanogenmod WebsiteCF-Root
Official Thread
Author: @ChainfireHeimdall - Open-Source Cross-Platform Flashing Suite
Official Thread
Author: Benjamin DobellOVERCOME
Official Thread
Author: @alterbridge86Install/Recovery MethodsTroubleshootingIf you have a Froyo stock ROM then you should check if your bootloader is signed/secured.
JM9 P1000L version have a protected bootloader.
You can download app and get more informations about bootloaders here.
Some ROMs dont have a dbdata.rfs file.
dbdata.rfs is necessary for flash NEW roms.
dbdata.rfs link for Gingerbread
Before flash, open .tar file (rom) and drag dbdata.rfs into package.
After flash if your 3G dont work, you should install modem of the previous rom.
You can do this replacing modem.bin (JM9) file into .tar package before flash.Recovery - Black ScreenMany P1000L/N users are trying to install the new android version (Gingerbread).
If your device shows a black screen you will need press on power button some time for power off it.
Now, for download mode you will press this buttons: Home + (Vol -) + Power
You can test download mode with Odin. When it shows COM Port (yellow) enabled.
You need learn about Heimdall.
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash firmware (aka ROMs) onto Samsung Galaxy S devices. More information.
Now, you should download P1000L stock ROM (Password is "samfirmware.com"):
P1000L
Uncompress .rar
Uncompress .tar
You will see:
boot.bin
cache.rfs
factoryfs.rfs
gt-p1000_mr.pit
hidden.rfs
modem.bin
param.lfs
Sbl.bin
zImage
Now, using Heimdall command line, you will flash boot files.
Be careful!
Its very IMPORTANT...
Its works ONLY on P1000N or P1000L devices.
Command for recover:
Code:
heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin
REMEMBER - The boot files is signed.
Read this topic for solve this.
Voce é o caraaaa!!
Can i use this with...?
overcome 2.0.x will work with this kernel?
and the bootloader?
Wait, this is the official binary kernel + cf-root?
Can I install this with BJP3?
No CwM yet, right?
THANKS!
rslee said:
Wait, this is the official binary kernel + cf-root?
Can I install this with BJP3?
No CwM yet, right?
THANKS!
Click to expand...
Click to collapse
AFAIK, CF-root does have CwM inside already.
This should be ok to use with Overcome too, since Overcome only asks for a GB kernel.
Thanks you very much Humberto, spared me of the work of understanding kernels
Greetings Santroph.
humberos said:
June, 14 2011
I've just ported CF-Root to new Gingerbread Kernel.
Thread about CF-Root
Kernel Download
Flashed by Heimdall 1.0.2b
Uncompress file and write follow command:
Code:
heimdall flash --kernel zImage
Click to expand...
Click to collapse
Humberto, coule you please make a tar/odin version of the kernel? For some reason my heimdall don't connect to my device, no matter what I do.
I can only get a -12 error (cannot connect)
I have installed the drivers and everything else.
Greetings, Santroph.
santroph said:
Humberto, coule you please make a tar/odin version of the kernel? For some reason my heimdall don't connect to my device, no matter what I do.
I can only get a -12 error (cannot connect)
I have installed the drivers and everything else.
Greetings, Santroph.
Click to expand...
Click to collapse
The kernel is a .tar file.
Regards,
Humberto
Sent from my GT-P1000N using XDA Premium App
Hi Humberto,
I'm planning to flash Gingerbread using Heimdall.
I have three questions:
1º) I'll decompress the ROM file and substitute dbdata.rfs and modem.bin with the files you said in the other thread and flash everything with Heimdall (repartition enabled). Is it right?
2º) The bootloaders at the Gingerbread P1000N ROM is fully compatible with P1000L device right?
3º) Is it possible to post here the md5sum of each file that I will need to flash using heimdall? I'll be much more calm if I can compare the md5sum of the files you have flashed and we know that work with the ones I'm suppose to flash.
Thanks,
Ronan
humberos said:
The kernel is a .tar file.
Regards,
Humberto
Sent from my GT-P1000N using XDA Premium App
Click to expand...
Click to collapse
I'm sorry, the old kernel tar files I had had a lot os scripts inside too, so I thought this one wouldn't be accepted by Odin, it worked fine and now I have root
Thank you very much.
Our bootloaders are signed and apparently locked with this rom, do you think it is safe to use the apk to unlock them and than use Overcome?
Greetings, Santroph.
Hello HumberOS
Hi Humberos, I have a galaxy P1000N tab to which you installed your rom and I am as P1000L, then install the Kernel ltn_20110612.tar all very well without complaints with the bootloader unlocked with root enabled ..!
My question is: If I install this new kernel ltn_cfroot_r1 Gingerbread can install without problems ..?
Could you tell me the procedure I followed and the files I need to get this q Gingerbread once flashed with your new kernel ..?
As I said originally my Tab is a P1000N your Rom and you have used Odin 20110612 kernel 1.7 for all procedures
Sorry for the length of my questions but understand I need to do to not ruin my tab and I am very new to this and I would greatly appreciate a clear and comprehensive response to achieve what I ask you as well as a detailed been generous with other users ..
Thank you very much Greetings from Ecuador
scalamusical said:
Hi Humberos, I have a galaxy P1000N tab to which you installed your rom and I am as P1000L, then install the Kernel ltn_20110612.tar all very well without complaints with the bootloader unlocked with root enabled ..!
My question is: If I install this new kernel ltn_cfroot_r1 Gingerbread can install without problems ..?
Could you tell me the procedure I followed and the files I need to get this q Gingerbread once flashed with your new kernel ..?
As I said originally my Tab is a P1000N your Rom and you have used Odin 20110612 kernel 1.7 for all procedures
Sorry for the length of my questions but understand I need to do to not ruin my tab and I am very new to this and I would greatly appreciate a clear and comprehensive response to achieve what I ask you as well as a detailed been generous with other users ..
Thank you very much Greetings from Ecuador
Click to expand...
Click to collapse
I don't think you can flash a Gingerbread kernel on a Froyo ROM, can you?
Hello alroger
So I must first pass a Gingerbread Froyo ...?
I can do it directly from the ROM HumberOs or need to return to the Rom of bone stock original Samsung firmware ...?
Thank you very much for your time and help
Greetings from Ecuador
Ronis_BR said:
1º) I'll decompress the ROM file and substitute dbdata.rfs and modem.bin with the files you said in the other thread and flash everything with Heimdall (repartition enabled). Is it right?
Click to expand...
Click to collapse
You will uncompress .tar and PASTE dbdata.rfs, because this rom dont have it.
Ronis_BR said:
2º) The bootloaders at the Gingerbread P1000N ROM is fully compatible with P1000L device right?
Click to expand...
Click to collapse
Yes, I am using them.
Ronis_BR said:
3º) Is it possible to post here the md5sum of each file that I will need to flash using heimdall? I'll be much more calm if I can compare the md5sum of the files you have flashed and we know that work with the ones I'm suppose to flash.
Click to expand...
Click to collapse
SHA1SUM
Code:
34f374d5be752ebfba3d3846a66727429b63c948 boot.bin
3e6a3d1e6ce91189de1a5776fd91e5a267ee0543 cache.rfs
4c836791da2af319a82d85e8d7af4dce36f60e7c factoryfs.rfs
88497436de86d8b29eccbe7bb34a1422d23867b6 gt-p1000_mr.pit
a20ac1413882718f2c607e7f775dd74920d4a66d hidden.rfs
d7ede0664ff1ba6cdd0f7e9e80e1eba478c63521 modem.bin
cc8888883068c827347f769a9ce395b3290bc3aa param.lfs
45f9cd331a07cb6e6b4468267421c874ef76ddf0 Sbl.bin
7ab6bbf12e5d362c121a09dc500d15b886214838 zImage
Regards,
Humberto.
Maikeu Locatelli said:
Can i use this with...?
Click to expand...
Click to collapse
P1000N or P1000L (without Tv tuner)
Maikeu Locatelli said:
overcome 2.0.x will work with this kernel?
Click to expand...
Click to collapse
I think yes, but I dont tested yet.
Maikeu Locatelli said:
and the bootloader?
Click to expand...
Click to collapse
The bootloaders ARE signed, but NOT secured.
I think that custom kernels and firmwares will can still be flashed.
Regards,
Humberto.
rslee said:
Wait, this is the official binary kernel + cf-root?
Click to expand...
Click to collapse
Yes! Official "binary" P1000N kernel with CF-Root.
rslee said:
Can I install this with BJP3?
Click to expand...
Click to collapse
I advise you flash it with Heimdall.
rslee said:
No CwM yet, right?
Click to expand...
Click to collapse
We have CwM 3.0.0.5 !
Regards,
Humberto.
Hello
HumberOs
Friend looks Gingerbread need to install on my Tab P1000N
I have installed your rom and your zImage_ltn_20110612 Kernel Could you please help me
I need to return to stock Froyo to install Gigerbread ...?
My Tools Froyo stock return are: dbdata.rfs, P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME.tar, and Odin P1_add_hidden.pit 1.7.
Gingerbread and ascend to the tools and files are the same except that the rom is the P1000NUBJP7_P1000NUBJP3_P1000NUUBJP7_HOME.tar and then would use your kernel ltn_cfroot_r1.tar Flashing
Please I need help with this could you tell me if I'm missing something about this or change something in the procedure ..?
HumberOs you do not have much time to explain everything and there are probably many more like me asking you for help but you'd be infinitely grateful if you give me a hand to have gingerbread on my tab
Thank you very much
Greetings from Ecuador
PS: I'm using Google translator for my language is Spanish
santroph said:
Our bootloaders are signed and apparently locked with this rom, do you think it is safe to use the apk to unlock them and than use Overcome?
Click to expand...
Click to collapse
The bootloaders are signed, but not secured.
Custom kernels and firmwares can still be flashed.
Do you flashed a custom Gingerbread kernel? So I think if you replace Overcome kernel...
Regards,
Humberto.
scalamusical said:
Hello alroger
So I must first pass a Gingerbread Froyo ...?
I can do it directly from the ROM HumberOs or need to return to the Rom of bone stock original Samsung firmware ...?
Thank you very much for your time and help
Greetings from Ecuador
Click to expand...
Click to collapse
I suggest you read and understand the other thread from HumberOS and follow post 314 with Humberto's little procedure for flashing Gingerbread and a few tips on postes following that one.
That means, return to stock Froyo ROM (2.2), wiping everything, before flashing stock Gingerbread ROM (2.3).
This is an unofficial compiled from Xperia Z1 CoCore-Z Kernel sources. I like to share with you my modified version of CoCore-Z kernel r27. I'd like to credit @cocafe it wouldn't be possible without you. I'm not a developer so I cannot answer your question about any bugs for this kernel immediately.
If the kernel crashed (freezed and rebooted), please fetch last_kmsg file after the crash reboot and post in the thread. I will ask cocafe how to resolve bugs.
Code:
su -c cat /proc/last_kmsg > /sdcard/last_kmsg
2015/04/01
please visit http://forum.xda-developers.com/showpost.php?p=59827552&postcount=8 to see more information:
Changelog:
1.Compiled using Linaro GCC 4.9.3 2015.03 toolchain with Cortex-A15 optimizations
2.Ramdisk adjusted for the Z1C
3.Updated PhilZ Touch recovery v6.59.0 & CWM v6.0.5.0 & TWRP v2.8.5.0
Requirements:
1. Unlocked Bootloader
2. Stock Sony KK firmware .757/.108/.157 or any ROM based on it.
Features:
Visit the CoCore-Z Original thread in the Z1 forum, and make sure you read all the instructions and features.
http://forum.xda-developers.com/xperia-z1/orig-development/kernel-cocore-z-r12-t2892310
Download Links:
https://mega.co.nz/#F!ysRWkCQY!Hb9wssFCCpc9fCEhI4zFQQ
Kernel Source:
https://github.com/cocafe/c6902_kernel_CoCore-Z
Credits:
cocafe (for his kernel sources and letting me build this unofficial release)
[NUT] (for all recoveries & 14.4.A.0.157 kernel ramdisk & NDRUtils)
OmarEinea (for his great script of build tools letting me easy way to compile kernel)
Christopher83 (for Linaro cross compiler toolchains)
And for everyone who had a hand in making this kernel better
sharonliu said:
This is an unofficial compiled from Xperia Z1 CoCore-Z Kernel sources. I like to share with you my modified version of CoCore-Z kernel r25. I'd like to credit @cocafe it wouldn't be possible without you. I'm not a developer so I cannot answer your question about any bugs for this kernel immediately.
If the kernel crashed (freezed and rebooted), please fetch last_kmsg file after the crash reboot and post in the thread. I will ask cocafe how to resolve bugs.
Code:
su -c cat /proc/last_kmsg > /sdcard/last_kmsg
Changelog:
1.Compiled using Linaro GCC 4.9.3 2015.03 toolchain with Cortex-A15 optimizations
2.Ramdisk adjusted for the Z1C
3.Updated PhilZ Touch recovery v6.59.0 & CWM v6.0.5.0 & TWRP v2.8.5.0
Requirements:
1. Unlocked Bootloader
2. Stock Sony KK firmware .757/.108 or any ROM based on it
Features:
Visit the CoCore-Z Original thread in the Z1 forum, and make sure you read all the instructions and features.
http://forum.xda-developers.com/xperia-z1/orig-development/kernel-cocore-z-r12-t2892310
Download Links:
https://mega.co.nz/#F!ysRWkCQY!Hb9wssFCCpc9fCEhI4zFQQ
Kernel Source:
https://github.com/cocafe/c6902_kernel_CoCore-Z
Credits:
cocafe (for his kernel sources and letting me build this unofficial release)
[NUT] (for all recoveries & 14.4.A.0.157 kernel ramdisk & NDRUtils)
OmarEinea (for his great script of build tools letting me easy way to compile kernel)
Christopher83 (for Linaro cross compiler toolchains)
And for everyone who had a hand in making this kernel better
Click to expand...
Click to collapse
cocafe mentioned that the wifi modules has to be original from stock ROM, so i replaced them before flashing the kernel, but wifi does not turn on.
thank you for reporting this problem, it should be resolved next release.
Nice to see another stock based kernel around!
Only .108 or also .157?
Schlengge said:
Nice to see another stock based kernel around!
Only .108 or also .157?
Click to expand...
Click to collapse
from cocafe´s post:
ROM: Stock KitKat 4.4.4 14.4.A.0.108 +
Click to expand...
Click to collapse
so imho for .157 too
sharonliu said:
thank you for reporting this problem, it should be resolved next release.
Click to expand...
Click to collapse
i think this solves the problem: LINK
moonryder said:
i think this solves the problem: LINK
Click to expand...
Click to collapse
Thanks for the information. Just like DooMKernel, my goal is no need to compile wlan module. If I am not luck, I will build the wlan module in this weekend.
Changelog :
wlan is working
Download Links:
https://mega.co.nz/#F!ysRWkCQY!Hb9wssFCCpc9fCEhI4zFQQ
Insturaction:
If you want back to stock kernel, remember reboot to recovery and flash stock wife modules.
sharonliu said:
...flash stock wife modules.
Click to expand...
Click to collapse
funny...
btw will check this kernel
checked your stock wlan zip file, there is something wrong.
the wlan file is wrong named (the right name is pronto_wlan) and would be flashed into /system/lib/modules
but it has to be flashed into /system/lib/modules/pronto
p.s. i replaced all files in the zip with the original from my ROM
moonryder said:
funny...
btw will check this kernel
checked your stock wlan zip file, there is something wrong.
the wlan file is wrong named (the right name is pronto_wlan) and would be flashed into /system/lib/modules
but it has to be flashed into /system/lib/modules/pronto
p.s. i replaced all files in the zip with the original from my ROM
Click to expand...
Click to collapse
In CoCore-Z-r27-wlan-modul, pronto_wlan is not included in the zip file, only customize prima's wlan.ko. So my stock wlan zip file, no need to re-flash pronto_wlan. cocafe will try to port new pronto_wlan in the next time.
sharonliu said:
In CoCore-Z-r27-wlan-modul, pronto_wlan is not included in the zip file, only customize prima's wlan.ko. So my stock wlan zip file, no need to re-flash pronto_wlan. cocafe will try to port new pronto_wlan in the next time.
Click to expand...
Click to collapse
ok
btw flashed new build from today and wifi works like a charm.
thx
Thanks for this kernel
The only thing I noticed is that the notification light turns white when the battery is full
Normal it's green
Don't know if it's I bug but I noticed it
It's not a bug. Cocafe made it so the led will notify you of the real eoc. You can change the led color though here I believe "/sys/kernel/qpnp-charger/eoc_led"
i tried some scripts from cocafes original post HERE.
But none of the scripts work using SManager. Why?
always error: "No such file or directory ...."
but these files / directories are there (checked it with RootExporer) -DAMN
And if the scripts don´t work, there is no profit compared to DoomKernel...
moonryder said:
i tried some scripts from cocafes original post HERE.
But none of the scripts work using SManager. Why?
always error: "No such file or directory ...."
but these files / directories are there (checked it with RootExporer) -DAMN
And if the scripts don´t work, there is no profit compared to DoomKernel...
Click to expand...
Click to collapse
get terminal emulator from the play store and type it in there
or use adb shell
adb shell
su
Click to expand...
Click to collapse
it should work if you type these scripts. In my opinion, DoomKernel is the best custom kernel, bu nice to see another stock based kernel around.
sharonliu said:
...DoomKernel is the best custom kernel....
Click to expand...
Click to collapse
you are so right bro
I found this kernel seems not to support exFAT. May you fix that?
btw, thx for modifying this kernel for Z1C. It's amazing !!
a1b2c3901 said:
I found this kernel seems not to support exFAT. May you fix that?
btw, thx for modifying this kernel for Z1C. It's amazing !!
Click to expand...
Click to collapse
why do you use exFAT format?
Do you have files > 4GB in use?
moonryder said:
why do you use exFAT format?
Do you have files > 4GB in use?
Click to expand...
Click to collapse
Sometimes I will watch movie in the journeys, and that files may be oversize.
a1b2c3901 said:
Sometimes I will watch movie in the journeys, and that files may be oversize.
Click to expand...
Click to collapse
get "MLUSB Mounter" from the play store, you can use the USB hard drive (formatted NTFS, exFAT).
Dualbootpatcher for P8000
We have official support for dualbootpatcher.
How does it work?
Install app and patch flashable zip. Install zip via recovery. Now you can switch between 2 or more Roms.
link
!! Use only matching kernel and bootloader !!
LP Bootloader = 3.10 kernel
MM Bootloader = 3.18 kernel
Do not mix 3.10 kernel and 3.18 kernel !!!
Download: link
Source: link
walter79 said:
Dualbootpatcher for P8000
We have official support for dualbootpatcher.
How does it work?
Install app and patch flashable zip. Install zip via recovery. Now you can switch between 2 or more Roms.
link
!! Use only matching kernel and bootloader !!
LP Bootloader = 3.10 kernel
MM Bootloader = 3.18 kernel
Do not mix 3.10 kernel and 3.18 kernel !!!
Download: link
Source: link
Click to expand...
Click to collapse
Thx for that! If I'm on aosp7.1.1 what rom could i install as second rom?
stock MM
does this elephone support internet over mhl / micro-usb to ethernet adapter?
@walter79 if i want to install these ported roms from russian 4pda forum:
XOS_v2_6.0_Elephone P8000 https://drive.google.com/uc?id=0BzQtiGXzY6RHbnRHamc3ek1EY0E&export=download
Vibe_3.5_Elephone P8000_6.0 https://drive.google.com/uc?id=0BzQtiGXzY6RHaXVRd2xqSHF2bHM&export=download
as multiboot or primary rom it won't work
Roms are for first revision and based on android 6 with kernel 3.18
Could it be that the partitions of these roms are different to 7.1.1 and twrp can't flash it?
please post fstab from this rom
thx for fast reply! here you have the fstab from each rom if you need something please let me know!
Thank you!
remove the "verify" flag
walter79 said:
remove the "verify" flag
Click to expand...
Click to collapse
so i have to unpack the ramdisk and remove the "verify" flag from /fstab.qcom? Or am i wrong?
Thank you and have a nice day!
Is it possible to get this to work for our device?https://forum.xda-developers.com/showthread.php?t=2491299 so we could backup each rom separately cause twrp backs up both roms together
@walter79 i removed the verify from this line in fstab:
dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system /system ext4 ro wait,verify
now it looks like this:
dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/system /system ext4 ro wait
did you mean it like this? if so it still does not work for me i allways get the same error
walter79 said:
stock MM
Click to expand...
Click to collapse
do you have a flashable stock mm rom? my wont work
I will be posting my kernel builds here for convenience.
Pre-requisite
Unlocked bootloader with TWRP Recovery installed.
DRM fix must be in place before rebooting to avoid a soft brick.
This DRM patch which was available in sToRm//'s free Xperifix version still works
Features
- Stock based kernel with DT2W enabled.
- Forced encryption disabled.
- Passes Safetynet out of the box.
- Fully working camera (Pie kernel-no DRM fix needed for camera).
- Flashable zip with no need to extract boot.img
- Compatible with any version of Magisk.
Installation
Flash drmpatch.zip then kernel.zip.
You can then flash Magisk if you require it.
Camera doesn't depend on it though.
Flash zip in recovery (don't just extract boot.img as zip has system files to enable DT2W)
Kernel Sources
https://developer.sony.com/develop/open-devices/downloads/open-source-archives
Note. Kernel is compiled as per stock. DT2W is enabled in the DTB, the same parameters as used by the Loire platform.
Downloads
G8141_DT2W-41-kernel.zip
G8142_DT2W-41-kernel.zip
Kernel Requests.
Post the kernel.sin and I will patch it and add it to the OP.
Kernel Requests: View attachment kernel-G8142-205.zip thx !
oneheart said:
Kernel Requests: View attachment 4522264 thx !
Click to expand...
Click to collapse
Added, thanks. Please test and report back (I only own G8141).
shoey63 said:
Added, thanks. Please test and report back (I only own G8141).
Click to expand...
Click to collapse
if i need flash the drmpatch.zip ？
oneheart said:
if i need flash the drmpatch.zip ？
Click to expand...
Click to collapse
Yes, it's required.
it work on G8412 ， thx ！
How can I update to 205 without losing my data?
SilverGamer_YT said:
How can I update to 205 without losing my data?
Click to expand...
Click to collapse
Flash only system.sin - nothing else. Then boot to recovery and flash drmpatch.zip, kernel.zip and then Magisk if you need it.
Reboot and you are done.
@shoey63
dual sim kernel have a problem with wifi.
wifi is off didn't turn on
karrouma said:
@shoey63
dual sim kernel have a problem with wifi.
wifi is off didn't turn on
Click to expand...
Click to collapse
Kernel itself is unmodified, and ramdisk changes don't touch wifi settings at all. Seems to be a hardware or software problem with Sony sd835 as per various complaints here https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Wifi-connection-problem/td-p/1315030
Adding to the confusion is that the issue is sporadic, intermittent and apparently device specific. Some users suffer badly, whereas others have no problems.
At any rate, there is nothing I can do about it.
shoey63 said:
Kernel itself is unmodified, and ramdisk changes don't touch wifi settings at all. Seems to be a hardware or software problem with Sony sd835 as per various complaints here https://talk.sonymobile.com/t5/Xperia-XZ1-Compact/Wifi-connection-problem/td-p/1315030
Adding to the confusion is that the issue is sporadic, intermittent and apparently device specific. Some users suffer badly, whereas others have no problems.
At any rate, there is nothing I can do about it.
Click to expand...
Click to collapse
Thank you for you work.
One guy tell me to flash CE1 firmware
I will trt
Hi, thank you for time to do this kernel @shoey63 nice work
Just a little beginner's question ... what is the best kernel for my rom stock (yours ot androplus kernel),
from what I read your kernel is not changed at all ?
Castiglionais said:
Hi, thank you for time to do this kernel @shoey63 nice work
Just a little beginner's question ... what is the best kernel for my rom stock (yours ot androplus kernel),
from what I read your kernel is not changed at all ?
Click to expand...
Click to collapse
For tweaking and double tap to wake - Androplus. For the stability of stock - mine.
shoey63 said:
I will be posting my kernel repacks here for convenience.
Pre-requisite
DRM fix must be in place before rebooting to avoid a soft brick.
This DRM patch which was available in sToRm//'s free Xperifix version still works.
Features
- Pure stock kernel with only ramdisk changes to enable DRM fix plus solve SafetNet and Magisk issues.
- Passes Safetynet out of the box.
- Fully working camera (No green Pic's).
- Flashable zip with no need to extract boot.img
- Compatible with any version of Magisk.
Installation
Flash drmpatch.zip then kernel.zip.
You can then flash Magisk if you require it.
Camera doesn't depend on it though.
Downloads
drmpatch.zip
G8141-205
G8142-205dual
Click to expand...
Click to collapse
sir what extra this forbidden xperifix does?
i mean if i have maple kernel and those 3 files from system.sin, and using @serajr 's modified script of TOBIAS , I create one boot.img file and flash it and flash the drmpatch.zip (given) here by you via twrp...
WILL it work?
i don't have xzp
if okay, plz reply
YasuHamed said:
sir what extra this forbidden xperifix does?
i mean if i have maple kernel and those 3 files from system.sin, and using @serajr 's modified script of TOBIAS , I create one boot.img file and flash it and flash the drmpatch.zip (given) here by you via twrp...
WILL it work?
i don't have xzp
if okay, plz reply
Click to expand...
Click to collapse
Not quite OK. You also need to patch init.environ.rc as per this post https://forum.xda-developers.com/showpost.php?p=74310718&postcount=43
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
jianlin3062 said:
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
Click to expand...
Click to collapse
You could try this one. It is from M-ROM v1.5, a Chinese rom.
I would flash the kernel.zip again, then the SuperSU.zip then the drmpatch.zip and wipe cache and dalvik and see how you go.
jianlin3062 said:
I tried flashing SuperSU 2.79 and 2.82 onto my G8142 which runs oreo but it always results in the phone getting stuck at the Sony logo right after the bootloader unlock warning.
Does the kernel not need to be patched for SU to work?
Click to expand...
Click to collapse
You must try this version this is created for xperia phones:https://forum.xda-developers.com/attachment.php?attachmentid=4164510&d=1496008012
help
I can not understand the order in which I have to do things
Should I unlock the bootloader and then?
I must install the recovery by adb or first the kernel
I come from samsung and the difficulty here is greater and there is much less information, if someone could help me I would appreciate it. I have the latest version of oreo the .205