Develop Bugs

¤ [ROM][MOD] ¤ 17/3 ConvergeROM XWJS8 added. JP6, 'DESI' DDJP6 MODEM/CSC.

Hi Desi guys & gals.
Here I present to you Latest XXJPY with MODEM & CSC from DDJP6. This way we wiil enjoy the Latest PDA with localized settings.
Although this works, there are certain things to be ironed out. I am working on them. Please wait till I update this post. This works perfectly, while DDJP6 gives you all settings automatically, with XXJPY you need to configure a few things by yourself.
If any of you want to try this ROM & help me with problems, I will be grateful.
Give me some time to update all the necessary information here.
1. Flash Stock DDJP4 if you are on any modded ROMs. Dont bother if you are on stock 2.1.
2. Using Odin Flash this ROM over it. Use 512 pit with re-partition.
Thas all. You now have a pre-rooted phone with custom CWM & lagfix options.
Caution, this will wipe all your data. Please wipe/factory reset before flashing & do a dalvik wipe after flashing, before starting for first time. Titanium Backup works flawlessly for me for Backup & Restore.
-----------------------------------------------------------------------------
Odin3 1.7 with pit files
- Download
-----------------------------------------------------------------------------
XXJPY PDA with SpeedMOD kernel k12c
- Download
Credits go to criskelo for this.
OR
XWJS8 PDA with SpeedMOD kernel k12c
- Download
OR
XFJS2 PDA Stock with SpeedMOD Kernel k12t
- Download
OR
XWJS3 PDA Stock with SpeedMOD Kernel k12p - 500hz
- Download
OR
XWJS5 PDA with SpeedMOD k13a - 500hz
- Download
OR
ZSJPG PDA with SpeedMOD k13c - 500hz
- Download
OR
DDJP6 PDA with SpeedMOD kernel k12k-256hz
- Download
OR
DDJP6 PDA Stock with recovery 3e non-rooted.
- Download
-----------------------------------------------------------------------------
XXJPY stock kernel
- Download
-----------------------------------------------------------------------------
AND
DDJP6 MODEM
- Download
DDJP6 CSC
- Download
-----------------------------------------------------------------------------
Notes :
1. I have found it a safe practice to first flash ONLY the pit file with re-partition. Pull the battery before it restarts, put it into download mode, select PDA, MODEM & CSC, NO pit this time & NO re-partition plug-in the phone in download mode at the last moment & press start.
2. Link to Stock DDJG4
- Download password = samsung-firmwares.com
3. Although its not really documented & thus open to discussion, I have found that Odin3 1.7 is better at NOT semi-bricking your phones. It has helped a few to come out of semi-brick after using Odin3 1.3.
4. This has been tested by me & friends to be working on Intentional Samsung Galaxy S GT-I9000.
5. All questions & clarifications about SpeedMOD should be referred Here
6. Those of you who want to try out STOCK XXJPY, Flash XXJPY kernel over the modded one.
7. I am currently taking a wish-list. Anything Stock is welcome.
8. This thread is located at http://forum.xda-developers.com/showthread.php?t=898104
9. If for some reason you cannot pull the battery in time or similar thing & the phone won't boot, please used VolDn+Menu+Pwr combo to go into download mode.
changelog :
3/1/11 - First Post.
10/1/11 - DDJP6 PDA with SpeedMOD added. Stock DDJPY kernel added.
14/1/11 - Added link to my own post. Check this thread.
2/2/11 - Added JS2.
9/2/11 - Added JS5.

ragin said:
Hi people from the Indian Sub-continent.
Here I present to you Latest XXJPY with MODEM & CSC from DDJP6. This way we wiil enjoy the Latest PDA with localized settings.
XXJPY PDA with SpeedMOD kernel k12c
- http://www.multiupload.com/0361JOIZNR
DDJP6 MODEM
- http://www.mediafire.com/file/ixc1owv3hz7jhtx/Phone-_JP2-Firm-I9000DDJP6.zip
DDJP6 CSC
- http://www.mediafire.com/file/ydk56vottokgad0/CSC-JP5-Firm-I9000DDJP6.zip
Credits go to criskelo for this.
Click to expand...
Click to collapse
Are you certain about this ? I mean, CSC and MODEM File size seems to be very low ????

ragin said:
Hi people from the Indian Sub-continent.
Here I present to you Latest XXJPY with MODEM & CSC from DDJP6. This way we wiil enjoy the Latest PDA with localized settings.
XXJPY PDA with SpeedMOD kernel k12c
- http://www.multiupload.com/0361JOIZNR
DDJP6 MODEM
- http://www.mediafire.com/file/ixc1owv3hz7jhtx/Phone-_JP2-Firm-I9000DDJP6.zip
DDJP6 CSC
- http://www.mediafire.com/file/ydk56vottokgad0/CSC-JP5-Firm-I9000DDJP6.zip
Credits go to criskelo for this.
Click to expand...
Click to collapse
Hi,
Can you kindly provide the PDA without the SpeedMod. The Offiical one. With out any change or mod.

Installation guide please

Hi Ragin, I have a suggestion and request at the same time for you:
Probably the easiest way for your Indian fellows to use and try out any kind of ROM is to do a backup of their APNs while they are still on stock Rom with the following program available for free in the market:
http://www.appbrain.com/app/apn-backup-restore/com.riteshsahu.APNBackupRestore
After having flashed the ROM of their choice they can simply restore the APN settings through the same program and they are immediately online again.
Now my request: as I will travel to India very soon I would like you to backup your APN settings for me with this program and either post the xml file here in reply or PM it to me.
Thanks a lot and cheers from Bali

itenos said:
Hi Ragin, I have a suggestion and request at the same time for you:
Probably the easiest way for your Indian fellows to use and try out any kind of ROM is to do a backup of their APNs while they are still on stock Rom with the following program available for free in the market:
http://www.appbrain.com/app/apn-backup-restore/com.riteshsahu.APNBackupRestore
After having flashed the ROM of their choice they can simply restore the APN settings through the same program and they are immediately online again.
Now my request: as I will travel to India very soon I would like you to backup your APN settings for me with this program and either post the xml file here in reply or PM it to me.
Thanks a lot and cheers from Bali
Click to expand...
Click to collapse
Yes, I am aware of that. I myself did that till today. This ROM is meant for those who want to stick to STOCK roms without any modifications, as the present 2.2.1 ROMs are quite fast & lagfree. And still have the benefit of having their regional MODEM & CSC because of vast number of mobile providers in India.
Those who are using XXJPY stock rom in India can actually try using this ROM & give a feed back about battery use.
Here is my backup of APNs http://www.mediafire.com/?93uexsdw1ywodwf

zion12 said:
Installation guide please
Click to expand...
Click to collapse
Any pit file for this and repartition?

fulcrum1971 said:
Any pit file for this and repartition?
Click to expand...
Click to collapse
Included in the Odin download.
Method posted in note 1.
PS : Post # 1030 for me. I used to love a girl with roll # 1030 when I was in 7th std.

@ragin,
Do you know how to change the locale settings for xxjpy? Meaning since xxjpy is eu-based, I want the locale for my region (SEA) which includes thai and viet languages.
Sent from my GT-I9000 using XDA App

Doesn't work at all.

ragin said:
XXJPY PDA with SpeedMOD kernel k12c
- http://www.multiupload.com/0361JOIZNR
Click to expand...
Click to collapse
Could you explain how do you achieved this? Since SpeedMOD is based on JPX sources...
Thank you in advance.
[[]]

@Ragin
So I ask
Link PDA I9000DDJP6
PDA-JP6-Firm-I9000DDJP6.zip (158.96 MB)
@underv0ltage
Only modifies the. tar adding the new kernel

ragin said:
Here is my backup of APNs http://www.mediafire.com/?93uexsdw1ywodwf
Click to expand...
Click to collapse
Thanks ragin, but your posted file is in a wrong format, it cannot be restored. At first sight I see differences in the Apache disclaimer on top of it and the missing APN counter. Are you sure you used my above mentioned program to backup?
Sent from my GT-I9000 using XDA App

Cool thread boss
Now in Darky's 7.6 but planning to get back to Stock.
Since i am in 7.6(JPY) do i need to use the repartion pit file???

criskelo said:
@Ragin
So I ask
Link PDA I9000DDJP6
PDA-JP6-Firm-I9000DDJP6.zip (158.96 MB)
@underv0ltage
Only modifies the. tar adding the new kernel
Click to expand...
Click to collapse
Thanks a LOT, I will put it in the First post. Is this stock or with speedMod?

fulcrum1971 said:
Doesn't work at all.
Click to expand...
Click to collapse
What doesn't work?

ragin said:
What doesn't work?
Click to expand...
Click to collapse
Tried flashing it two or three times but couldnt. Couldnt flash stock 2.2. Had to flash stock 2.1 to recover it and update to 2.2 through kies. Tried the battery pull out thing too. In one case it got stuck in clockwork recovery and two times it said something like cant mount e........ May be i messed something up.Tried it on both stock 2.1 and 2.2.
Sent from my GT-I9000 using XDA App

fulcrum1971 said:
Tried flashing it two or three times but couldnt. Couldnt flash stock 2.2. Had to flash stock 2.1 to recover it and update to 2.2 through kies. Tried the battery pull out thing too. In one case it got stuck in clockwork recovery and two times it said something like cant mount e........ May be i messed something up.Tried it on both stock 2.1 and 2.2.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I think you got it all wrong, because of that mount e error, you first need to flash a STOCK 2.1 ROM if you are on a 2.2 ROM. Then go into download & flash this 2.2.1 over it. If you are already on stock 2.1, you can flash this ROM directly over it.

Qs
Just out of curiosity, how is this useful? What localization benefits do we get?

ragin said:
I think you got it all wrong, because of that mount e error, you first need to flash a STOCK 2.1 ROM if you are on a 2.2 ROM. Then go into download & flash this 2.2.1 over it. If you are already on stock 2.1, you can flash this ROM directly over it.
Click to expand...
Click to collapse
I was on Darky's & here's what I did. Fired up Odin3 1.7, selected 512 pit, it automatically selects the re-partition for you, put the phone in download mode, connected it to my computer, waited till the com # showed up in Odin, pressed Start. It flashed & showed Pass in green & pulled battery. Fired up Odin again, flashed stock DDJP4. Fired up Odin again, No Pit, Select XXJPY PDA, MODEM & CSC, put my phone in download mode again, connected, & pressed Start when it showed up in Odin. It boots up & I am in XXJPY.
seltaeb said:
Just out of curiosity, how is this useful? What localization benefits do we get?
Click to expand...
Click to collapse
The localization benifits are better wifi, better 2G 3G & better integration with Service Provider's. PDA is universal whereas MODEM & CSC are region specific.

[KERNEL] SP-ROOT - GT-I9000 ROOTED STOCK Kernels - by stock+ Team (ALL NEW VERSIONS!)

Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Please find latest of kernels listed below:
*NEW* ROOTED! I9000XXJW4 - Gingerbread (2.3.6) - CL: 1043937 - B.Date: 19-03-2012 - Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using Odin (you will find it in package)
2. Profit!
What's included in this kernel
- Base image of kernel is 100% pure stock by samsung
- ClockworkMod Recovery added !
- Fully rooted (after flash you will have superuser and su installed)
Nothing more, nothing less - Enjoy!
If you like our modifications, support us with even a little donation for a beer -> Click to donate!
Don't forget to follow our service at Twitter (@SamsungUpdates) or (soon) Samsung-Updates.com
Best regards for CF for showing us the way and all XDA-DEVELOPERS members! we love ya!

This will be interesting. *[Subscribing]*

Thanks, I also prefer to use an stock kernel with the only addition of root features.
Lot of 2.3.5 custom kernels are based on 2.3.4 sources and also have tweaks that might do more bad than good.
Imho if those tweaks were so good samsung would have added them to their roms, it wouldn't be the first time they do that.
Enviado desde mi GT-I9000 usando Tapatalk

where it's ? no file posted

when its done, soonish =) tool is almost finished

ITs finished, download, test and let us know

Grooby said:
Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest insecure kernels based on stock kernels that you may find in ROM by Samsung.
Insecure kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel looks/feels like stock.
Please find latest of kernels listed below:
JVU: Download HERE!
Instructions:
Code:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
best regards to ChainFire for showing us the way!
and of course for all XDA-DEVELOPERS members! we love ya!
Click to expand...
Click to collapse
XWJVU?
10chars

Added next (looks like latest) kernel, and more details to them

hack the planet =)

ROOTED! I9000XFJVA - Gingerbread (2.3.5) - CL: 621561 - B.Date: Tue Oct 4 KST 2011 added for
[ROM] XFJVA - JVA_JV1_JVT.tar [04.10.2011] [ANDROID 2.3.5] [MULTICSC] [KIES]
Original ZIP from Kies GT-I9000 TSR (Serbia & Montenegro) TEST MODE

is it possible somehow to add CWM to these kernels?

These are suppoused to look/feel/work as oryginal kernels just with rooted by default. We are currently working on extending default recovery menu with some features invisible for a service eye but useful for flashing custom roms

Thank you man!
It's possible to add JVT?

JVT Added, enjoy!

added to first post ROOTED! I9000XXJVT - Gingerbread (2.3.5) - CL: 617736 - B.Date: Thu Sep 29 KST 2011
for [FIRMWARE] XXJVT Android 2.3.5 Build Date Sep 29 DOWNLOAD

thank you! great work!!!
is it possible to unroot???

yes by flashing stock kernel zImage - we will update first post with those later

hey
i flashed it and installed superuser.apk
rooting worked fine
however, when i downloaded rom manager from market for cwm... i try to flash in recovery but says theres an error
" E: failed to verify whole - file signature
E: signature verification failed
installation aborted
any ideas please ?

because there is no custom clockworkmod recovery installed
try installing rom manager and flashing recovery from there
youre looking for Flash ClockworkMod Recovery and pick i9000
MTD is for cyanogen so pick normal version
should work

actually thats wut ive done... and it gave me an error
but let me be sure
i run the runme.bat file from the extracted file on desktop while usb is still connected and kies not ?

[S+ Kernel] - Rooted stock kernel for I9000XWJW1 (2.3.6) - no mods, only root + SU

Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Here's the latest rooted kernel for I9000XWJW1 (2.3.6) which just leaked !
*NEW* ROOTED! I9000XWJW1 - Gingerbread (2.3.6) - CL: 788890 - B.Date: Tue Dec 13 KST 2011 - Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
Enjoy!
PS: Remember to join our service at http://samsung-updates.com/ or follow us on twitter at twitter.com/SamsungUpdates
"One stock+ Team to rule them all, One stock+ Team to root them, One stock+ Team to beat them all and in the happiness bind them" - Toolkien ;P

OK, thanks, but, it's not realy clear for me.
I open ODIN
1 - I flash XWJW1
2 - I flash your zimage.tar
I turn off ODIN
3 - I run RUNME.BAT
end ?
I have JW1 rooted ?

Yup. just download Superuser.apk from Android market and you're done

Hi,
I'm currently using 2.6.35.12-gdf10700 [email protected]#1.
Is this stock (I9000XWJW1) kernel more up to date / better?
Many thanks

Hi, No Expert, as far as i know the kernel you have currently installed is from cm9 ICS or CM7 i think, this kernel is for JW1 samsung this will not work on your rom .

rayul123 said:
Hi, No Expert, as far as i know the kernel you have currently installed is from cm9 ICS or CM7 i think, this kernel is for JW1 samsung this will not work on your rom .
Click to expand...
Click to collapse
Many thanks.

Grooby said:
Hello everyone,
Stock+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Here's the latest rooted kernel for I9000XWJW1 (2.3.6) which just leaked !
*NEW* ROOTED! I9000XWJW1 - Gingerbread (2.3.6) - CL: 788890 - B.Date: Tue Dec 13 KST 2011 - Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
Enjoy!
PS: Remember to join our service at http://samsung-updates.com/ or follow us on twitter at twitter.com/SamsungUpdates
"One stock+ Team to rule them all, One stock+ Team to root them, One stock+ Team to beat them all and in the happiness bind them" - Toolkien ;P
Click to expand...
Click to collapse
What version is the zImage kernel?

[FAQ - All You Need] GT-S7560M Galaxy Ace II x / Ace2x

Welcome to the Samsung Galaxy Ace II x / GT-S7560M Unofficial FAQ!
-The Galaxy TREND GT-S7560 is also supported-
==>THIS IS AN OUTDATED PHONE AND THE LINKS/FILES BELOW MAY OR MAY NOT BE THERE ANYMORE<==
!!SEE POST #2 BELOW FOR LINKS
Frequently Asked Questions:
1- "Flash with CUSTOM RECOVERY (TWRP/CWM)" : If you still have the stock recovery, download and use Daver18qc's Root Kit Below to install a custom recovery from the CUSTOM RECOVERIES header in post #2.
2- "Flash with ODIN" : ODIN is inside Daver18qc's Root Kit *With Detailed Instructions* below.
3- "Push with ADB" : You need to download and install Android's Development Kit and then refer to the small tutorial below !
4- If you've got problems with ODIN or ADB, make sure that you have USB Debugging Enabled under Settings > Developer Options.
--Make sure you have only 1 device showing in ODIN (Only 1 little square filled at the top-left)
--Also make sure Kies.exe is not running on the computer!
5- There are custom ROMs, such as CyanogenMOD 10 and 11, OmniROM 4.4, and more. There is no Lollipop ROM just yet, though it is slowly being worked on. A lot of work is needed to update our device code for Lollipop. You can find links to different custom ROMs for our device in post #2.
6- There is NO free method to UNLOCK SIM yet.
7- If you want to flash any deodexed rom with a custom recovery, you must first flash the complete corresponding ROM from SamMobile. That means deodexed Guatemala need to be flashed over Guatemala, not over Panama or Canada. Same goes for deodexed Australia.
8- If you get a Yellow warning triangle on boot after flashing something, use TriangleAway to remove it and reset the flash counter to 0. (On the page, use the provided TriangleAway apk file available for download at the bottom of the first post)
9- Flashing a ROM from Guatemala or Australia will not change your service provider, you will stay with Bell/Koodo/Rogers even if these companies don't exist in Guatemala.
10- Sometimes when flashing ROMS, your carrier will show as "Bell" even though you are on Virgin / Solo, this is normal as these are 2 sub-companies of Bell.
11- When you flash ANYTHING with a custom recovery, be sure to Wipe Cache and Wipe Dalvik Cache (advanced menu) before rebooting.
12- For ANY kind of flashing from a Windows computer, you will need the Samsung USB Drivers first and foremost, before doing anything else. If you're on Linux/Ubuntu, install Heimdall and search for tutorials for how to use it on XDA or Google.
13- If you have the Galaxy Trend GT-S7560 and CWM freezes while flashing a custom rom, then re-cook the rom inside the Kitchen with these tweaks:
Code:
For galaxy trend s7560
When building rom in kitchen, select Interactive Mode(1). after zipaling;
1. edit META-INF/com/google/android/updater-script in working folder and change " format("ext4", "EMMC", "/dev/block/mmcblk0p16"); " to " format("ext4", "EMMC", "/dev/block/mmcblk0p16", "0", "/system"); "
2. extract cm11 for ace 2x and replace META-INF/com/google/android/update-binary from cm11 to your rom
======================================END OF FAQ=============================================
Short Tutorials :
Buttons combinations (phone must be shutdown before !)
Download Mode : VOLUME DOWN+HOME+POWER
Recovery Mode : VOLUME DOWN+VOLUME UP+HOME+POWER
How to "Push with ADB" :
Install the Android Development Kit
Goto "platform tools" folder
Open a command prompt
Connect your phone with USB cable and USB Debugging enabled (developer settings)
Type in the command prompt:
-adb remount
-adb push "yourfilename" "/your/destination"
-adb reboot
example: "adb push SystemUI.apk /system/app/"
How to flash with ODIN :
-If your ROM is zipped, unzip it to a folder until you got a ".TAR.MD5" file
-Load up ODIN
-Shutdown your Phone
-Boot your Phone in Download Mode
-Plug in your USB cable, Odin should recognize the Phone and fill up a small square at the top left.
-Make sure only "F.Reset Time", "Auto Reboot" and "PDA" are check-marked in ODIN
-Load up your ".TAR.MD5" in the PDA section of ODIN
-Flash, wait for ODIN to tell you (Succeeded : 1, Failed : 0)
-Done.
How to flash CM11 (CyanogenMod11) by Alex150892 :
1.Install Australia MH3 stock rom with Odin
2.Download Root Kit and follow instructions inside (follow it carefully from beginning to the end)
3.Open cwm recovery and Wipe data/cache,and also wipe dalvik cache
4.Install CyanogenMod 11
5.Install 4.4 Gapps
6.(optional) Install ba2x kernel for CyanogenMod 11
7.Reboot and enjoy...
Note that first boot will take a while,so leave it for ~10mins

Links:
------CUSTOM ROMS-------
Note: None of the custom ROMs are bug-free. Some of them are more stable and bug-free than others though. Some common bugs among all the ROMs are lack of full camera resolution (the rear camera only captures images at 3MP instead of the 5MP in Stock ROM) and lack of bluetooth (our chipset doesn't support the newer bluetooth method used in Android 4.2+).
CyanogenMOD 10.2/11 by SeannyM UNSUPPORTED
CyanogenMOD 10.1 (Android 4.2.2) by jonypx09 UNSUPPORTED
CyanogenMOD 10.2 (Android 4.3.1) by Codename13 UNSUPPORTED
Beanstalk 4.4.275 (Android 4.4.2) by jonypx09UNSUPPORTED
CyanogenMOD 11 (Android 4.4.4) by jonypx09
OmniROM 4.4.4 (Android 4.4.4) by Codename13
------STOCK ROMS-------
(These are compatible with ALL countries and should be flashed if you want the latest version of ICS on your phone, regardless of where you live or who your phone service provider is.)
Stock firmwares from Sammobile
[URL="http://www.sammobile.com/forum/register.php"]You Must register on SamMobile by clicking here first! (FREE)[/URL]
Modified stock firmware "Stock II X Plus" by Codename13. It is deodexed, rooted, has init.d functionality, has ADB support, doesn't overwrite your custom recovery with the stock one, and other misc. changes, plus it shouldn't trigger the triangle flash counter.
If you install a stock ROM/firmware over a custom ROM and you get a bootloop, meaning you probably forgot to wipe data, and you're unable to boot to recovery, flash this package (by Codename13) with Odin to wipe your data partition, which should allow you to boot into the stock ROM.
------CUSTOM KERNELS-------
Sadman2's kernels for ICS 4.0.4 with GPU Overclock !
-Flash with CUSTOM RECOVERY, Wipe Cache and Dalvik Cache, Reboot.
V1: http://www36.zippyshare.com/v/15770700/file.html : OC CPU 1.2GHZ
V2: http://www43.zippyshare.com/v/33249511/file.html : OC CPU 1.3GHZ
V3: https://drive.google.com/file/d/0BzqKRicqg1wVdl9kQnI4NUk1ZTA/edit?usp=sharing : OC CPU 1.2GHZ GPU 275MHZ
V4: http://www11.zippyshare.com/v/61114227/file.html : OC CPU 1.3GHZ GPU 325MHZ
BA2X (Better Ace 2 X) 2.0 for Stock ROM by Codename13 UNSUPPORTED
SeannyM's Overclocked/Modded Kernels For Stock ROM(Flash with CUSTOM RECOVERY) UNSUPPORTED (I think)
[/B]-A vast range of frequencies to choose from, you can start with 1094mhz and if your phone is stable and doesn't reboot on it's own you can then go up a couple more until you get to a point where your phone won't boot, then you need to go back down in frequencies.
Most people seem to hit a wall around 1248mhz.
-To take full advantage of this Kernel, you should install No-Frills CPU Control
--Set the maximum frequency to the maximum possible
--Set the minimum to 240 or 320
--Set the governor to SmartAssV2
--Set the I/O sheculer to VR
------CUSTOM RECOVERIES-------
List of custom recoveries (thread maintained by Codename13)
http://forum.xda-developers.com/showthread.php?t=2682888
------OTHER-------
Possible fix to CM10.2 WiFi problems suggested by Anas Karbila
-Install that app from the market and use it to correct the problem.
https://play.google.com/store/apps/details?id=co.in.zextr.wcf
Possible fix to ICS 4.0.4 with WiFi problems on Sadman2's Kernels :
-Use a root file explorer to overwrite the original files in /system/lib/modules with those from the link below.
http://forum.xda-developers.com/attachment.php?attachmentid=2630852&d=1394823897
Daver18qc's GT-S7560M Root Kit (With Detailed Instructions!) v.3
Daver18qc's List of Apps that are Safe To Delete (Once Rooted!):Guatemela 'MG2 or Stock ROM
===========================================================================================
That one might be bugged, try the "Stock Guatemala MG2" + "Deodexed Guatemala" below if you have problems!
Daver18qc's Deodexed/Rooted Australia MH3 ROM (Latest 24sept2013) (Flash With CUSTOM RECOVERY Over Australia 'MH3 ROM, Wipe Cache/Dalvik)
===========================================================================================
Daver18qc's Deodexed/Rooted Guatemala MG2 ROM (Flash With CUSTOM RECOVERY Over Stock Guatemala MG2, Wipe Cache/Dalvik) *Confirmed Working*
Thanks to Viper520 for ViPER4Android
Daver18qc's Pack of Modded SystemUI ("Push" with ADB)
-(Download the one with the notifications toggles you want, the others buttons are removed!)
Codename13's ModPack UNSUPPORTED (Flash with CWM) for Deodexed ROMS ONLY!
Codename13's Panama Stock ROM (Flash with CUSTOM RECOVERY)
Codename13's Insecure Stock Kernel (Flash with ODIN in PDA Section)
OstrichX's CyanogenMOD 10.1 Work In Progress Page
Mods made by other people that works on GT-S7560M:
Cbass15's Black Theme AOSP SMS App!
(Delete /system/app/SecMMS.apk, Copy this file to /system/app/ and DON'T RENAME IT, then REBOOT!)
Screenshot of the CBASS15's AOSP Messaging
Dsixda's KITCHEN
You can deodex and customize almost any ROM made for this phone using this version of the Kitchen.
You will need a computer running Linux, either on the hard drive or in a virtual machine inside Windows.
You will need extensive knowledge of the Linux commands as everything is inside a terminal (a kind of MS-DOS command prompt)
If you don't know what Linux is, don't bother, this is out of your reach and nobody will teach you here.
Learn it somewhere else and come back here when you know where you're going with this.
DOWNLOAD 0.223 KITCHEN
DOWNLOAD EDIFY_DEFS FILE
-(The EDIFY_DEFS file is necessary to make a working ROM, you will softbrick your phone if you don't put this file inside your edify-defs folder in the kitchen folder.)
MANY THANKS TO : SeannyM, jonypx09, Codename13, OstrichX and all the others who made this possible!
POST YOUR QUESTIONS IN THE MAIN THREAD HERE PLEASE!

daver18qc said:
FAQ:
6- There is NO free method to UNLOCK SIM yet.
Click to expand...
Click to collapse
till there is some way to unlock the GT-S7560m (hopefully soon)
may i suggest http://forum.xda-developers.com/showpost.php?p=44776737&postcount=1916
unlockclient co
self contained software (means no 24 hour wait for email) takes seconds to do
i searched and search for hours yesterday.. found that one post above
and pretty much nothing else.. the huge 240 page 7560m thread has people asking every second page.. no joke
more info needs to be given about this. and maybe some research on how to do it for free.. but in the mean time:
i took a chance and got it.. and was not disappointed at all (works just like youtube vid)
btw im just a frustrated end user, not affiliated with any company

I would like to download this: Daver18qc's Deodexed/Rooted Australia ROM (Latest 24sept2013) but the DropBox download link isn't working...

Links are dead
Hi...
links for stock versions are not working...
wanted to download the guatemala stock to flash other rom later, but the link is dead...
any one has a backup by any chance?
im currently on the canadian rom i guess... already got root and CWM
thanks1

mertonv said:
Hi...
links for stock versions are not working...
wanted to download the guatemala stock to flash other rom later, but the link is dead...
any one has a backup by any chance?
im currently on the canadian rom i guess... already got root and CWM
thanks1
Click to expand...
Click to collapse
samsung-updates.com has most of the Ace II X firmwares on alternate mirrors such as RapidGator and ul.to.

Links are dead
Codename13 said:
samsung-updates.com has most of the Ace II X firmwares on alternate mirrors such as RapidGator and ul.to.
Click to expand...
Click to collapse
Hi!
Thanks for pointing out where...
samsung-updates .com/device/?id=GT-S7560M
Im assuming this is the one im looking for
Galaxy Ace IIx GT-S7560M PGU S7560MUBAMG2
Unfortunately, the links on that site seem broken too... unless its me and i cant get them to work...
looking with the code "S7560MUBAMG2" i found a version PBS, CPA and TCP (panama, panama and mexico), all three have the same build date and change list numbers (05.07.2013 and 1230914)...
im downloading PBS version, its a 532mb file, is that right?... no wonder the device sucks that much... that image is bigger than the stock for my the TF300t... this **** is bloated
is this the same image as guatemala?
Can't seem to find the PGU anywhere... all links are to hotfile (which seems dead) or broken
thanks anyway...
i wanted to test the slimbean rom but guess i'll have to wait a while then...
the device is slow, but rather have a slow phone than a bricked one for not following the procedure right
this device

Flash with CWM
daver18qc said:
Frequently Asked Questions:
1- "Flash with CWM" : If you still have the stock recovery, download and use Daver18qc's Root Kit Below to install CWM.
Click to expand...
Click to collapse
Well, couldn't the actual answer tell you exactly what you do once you've installed CWM...
I seem to have installed it — the Root Kit install finished successfully and there's one entry in Apps for "Superuser" that wasn't there before — but I can't actually do anything with it. How do you "Flash with CWM"?
---------- Post added at 11:16 PM ---------- Previous post was at 11:08 PM ----------
mertonv said:
Hi!
Thanks for pointing out where...
samsung-updates .com/device/?id=GT-S7560M
Im assuming this is the one im looking for
Galaxy Ace IIx GT-S7560M PGU S7560MUBAMG2
Unfortunately, the links on that site seem broken too... unless its me and i cant get them to work...
…
Can't seem to find the PGU anywhere... all links are to hotfile (which seems dead) or broken
thanks anyway...
Click to expand...
Click to collapse
AIUI, you don't need to use MG2. Try the third link (XSA) which will give you three options to download the MH3 firmware for Australia. That has three working download links.

IwasLegend said:
Well, couldn't the actual answer tell you exactly what you do once you've installed CWM...
I seem to have installed it — the Root Kit install finished successfully and there's one entry in Apps for "Superuser" that wasn't there before — but I can't actually do anything with it. How do you "Flash with CWM"?
Click to expand...
Click to collapse
You did it, since flashing with CWM puts the SUPERUSER program inside the phone. So if you have that, then you have indeed flashed with CWM, because it is the only way to flash the root package!
The instructions in the root kit apply to any other update/package that you want to flash with CWM.
IwasLegend said:
AIUI, you don't need to use MG2. Try the third link (XSA) which will give you three options to download the MH3 firmware for Australia. That has three working download links.
Click to expand...
Click to collapse
@mertonv:
Use Australia MH3 instead. SAMMOBILE got their hosting server shut down so the links for stock firmware are invalid, but they are supposed to get fixed soon, i hope.
EDIT: The Australia Stock ROM link works at the moment, maybe you didn't LOG IN / REGISTER on SAMMOBILE before trying to download and that's why you don't see anything, but at this time, it works !

Bluetooth and Camera still broken/buggy?
Can anyone confirm that there isn't a custom ROM (10.2 or 11) where there are issues with Bluetooth and the camera? I know the FAQ says there are issues but that was in October.

Service
Since flashing CM 10.2, I haven't been able to get service and if somehow I manage I only get it temporarily. Can someone explain as to why?

Downloading Australia MH3
When I go to download file, it takes me to http://terafile.co/5d8b16638748 and the problem is the download link isn't working for me. I do the captcha and everything but when it does to download it just doesn't want to download.

CasMz said:
When I go to download file, it takes me to http://terafile.co/5d8b16638748 and the problem is the download link isn't working for me. I do the captcha and everything but when it does to download it just doesn't want to download.
Click to expand...
Click to collapse
you have to keep refreshing(F5) until it goes to the download.

Does anyone try Triangle Away? is it complete safe?

miki89 said:
Does anyone try Triangle Away? is it complete safe?
Click to expand...
Click to collapse
It's been tested and it's safe, aside from the extremely slim risk of bricking your device while using Triangle Away (but I've never heard of anybody doing this). Chainfire hosts a free version here on XDA, although being free, it doesn't include every feature. But it works well enough.

there is any application or rom that Turn the hardware buttons light up when I have Missed calls or message?
ACE 2
thanks

thmls said:
there is any application or rom that Turn the hardware buttons light up when I have Missed calls or message?
ACE 2
thanks
Click to expand...
Click to collapse
If you are indeed using an Ace 2, we can't help you. This thread is one of the few for the Galacy Ace II X, a completely different device, other than similiar sounding names.
Speaking of BLN, I remember having recently seen an app that mimicks it very well. I'll message you if I remember what it was called.
For the BA2X 2.0, I'm working on implementing BLN in the kernel along with some other things. Our devices don't have the same kernel, but I could possibly create a universal BLN diff for others. I'm trying to diff a BLN module source for the Galaxy R and Captivate, so hopefully I can get it working.

Codename13 said:
If you are indeed using an Ace 2, we can't help you. This thread is one of the few for the Galacy Ace II X, a completely different device, other than similiar sounding names.
Speaking of BLN, I remember having recently seen an app that mimicks it very well. I'll message you if I remember what it was called.
For the BA2X 2.0, I'm working on implementing BLN in the kernel along with some other things. Our devices don't have the same kernel, but I could possibly create a universal BLN diff for others. I'm trying to diff a BLN module source for the Galaxy R and Captivate, so hopefully I can get it working.
Click to expand...
Click to collapse
So is the Kitkat update still being worked on or not? You say its being worked on in the first post but later say he's stopped. Also, are the bugs listed in black from flashing to Jelly Bean?
And lastly, can I use the Ace 2 GT-I8160 method of getting Kitkat for my ace 2x?

netnoob said:
So is the Kitkat update still being worked on or not? You say its being worked on in the first post but later say he's stopped. Also, are the bugs listed in black from flashing to Jelly Bean?
And lastly, can I use the Ace 2 GT-I8160 method of getting Kitkat for my ace 2x?
Click to expand...
Click to collapse
You're using an Ace 2 GT-I8160? This thread is for Galaxy Ace II X GT-S7560M. The two devices are completely different. The only reason that us Ace II X users use the Ace 2 forums is because the names are somewhat similiar. However, don't let that similiarity ruse you.

any kitkat?
Any chance that kitkat makes its way to this phone?...
If it were too... which stock should i load to my phone to be compatible with that?
Which custom rom on jb is the least buggy right now?
Thanks!

[REF][KitKat] Kernel Stock Collection i9505

Hi guys! My great mate and friend @edzamber has made a collection of all KitKat Stock Kernel and has made them available for all us! So, all credits go to him!
The Kernel is a computer program that manages input/output requests from software and translates them into data processing instructions for the central processing unit known also as CPU. The Kernel acts as an intermediary between the software and the hardware.
Neither @edzamber nor I are responsible of any damages caused by your mistakes. Perform the procedure at your own risk!
No mirrors please​
Requirements:
- A PC using Windows.
- Samsung driver --> HERE.
- Odin 3.07 or Odin 3.09 or Odin 3.10.
You have always to flash a Kernel matched to your ROM version. For example, if your ROM is GNG8, you have to flash the Kernel_Stock_GNG8.tar.md5 file. Otherwise your Wi-Fi will not work. If you flash a Stock Kernel on a Custom ROM, your Wi-Fi will not work because there aren't the stock modules in /system partition. You will need to download the firmware matched to the Kernel version, extract stock modules from system.img.ext4 using the kitchen and then put them in /system partition setting right permissions. Some stock modules are available HERE.
Let's start!
1) Download Stock Kernel from HERE.
2) Run Odin on your PC.
3) Reboot your device into download mode.
4) Put the Kernel in PDA/AP.
5) Put the tick only on "Autoreboot" and "F. Reset Time".
6) Click on "Start" to flash the Kernel.
7) Flash Stock Modules via recovery custom if you have one. Otherwise put manually them in /system partition using a file manager.
8) Reboot and enjoy!
Contributors:
@peppe130
@edzamber
Original thread: Phonandroid.com

Reserved..

Reserved..

Thanks my friend
Posté via Pyrana v44 by Alan-B
http://forum.xda-developers.com/showthread.php?p=53646684

Kernel GNH7 Updated
http://www.mediafire.com/?613y0yvomsvghuo
Posté via Pyrana v44 by Alan-B
http://forum.xda-developers.com/showthread.php?p=53646684

Kernel Stock GNH8 Updated
http://www.mediafire.com/?fi3r2i9ad6c77zc
Posté via Pyrana v46 by Alan-B
http://forum.xda-developers.com/showthread.php?p=53646684

GNH7 & GNH8 Kernels uploaded on Google Drive. A special thanks to @edzamber !

Thanks peppe, you're welcome my friend
Posté via Pyrana v46 by Alan-B
http://forum.xda-developers.com/showthread.php?p=53646684

Added GNH7 stock modules

Added GNH8 stock modules

Added GNH2 Stock Kernel.

Added GNH2 Stock Modules.

Thanks for your Support..
The Stock kernel download link is not working. please provide me other link???

harrisnehal said:
Thanks for your Support..
The Stock kernel download link is not working. please provide me other link???
Click to expand...
Click to collapse
Link works for me.. Try again

Added GNH6 Stock Kernel.
Thanks to @edzamber

Here is XXUGNI2 kernel
http://www.mediafire.com/?me9siwmennjd599
Here are XXUGNI2 Modem and BL :
http://www.mediafire.com/?ssu97teh42taeke
http://www.mediafire.com/?1nv77y9m6hhln96
Enjoy

Added XXUGNI2 Stock Kernel.
Thanks to @edzamber

edzamber said:
Here is XXUGNI2 kernel
http://www.mediafire.com/?me9siwmennjd599
Enjoy
Click to expand...
Click to collapse
Could you - by any chance - also provide the wifi modules?
/system/lib/modules
dhd.ko
scsi_wait_scan.ko
Downloading the image would me 15 hours

daniello8 said:
Could you - by any chance - also provide the wifi modules?
/system/lib/modules
dhd.ko
scsi_wait_scan.ko
Downloading the image would me 15 hours
Click to expand...
Click to collapse
Ok don't worry.. Just the time to download the firmware and upload modules

peppe130 said:
Ok don't worry.. Just the time to download the firmware and upload modules
Click to expand...
Click to collapse
Thanks .. I believe edzamber already has the image .. thought it would only take him a minute.
But any help is appreciated