Sup, so in my last post I was told to read some info, get a better idea of what to do and how to move forward.. Problem being is, Where do I start? There is no actual help for the situation I am stuck in.
Im on a unlocked M8, no carrier version. I rooted the device and installed TWRP. This restored my Kit Kat 4.4.4 to 4.4.2. This is the google play edition, I believe.
Here is the Situation.
followed a youtube guide by "unlockr" which seemed to cover every aspect. after the root and with TWRP, phone bugged me to do a update to 4.4.4, I did, went back to TWRP, booted to system and got stuck in a loop.
I was recommended to delete the OTA file to stop this.. I did. Didnt stop the loop, bizarre...
Along this process, In fast boot menu my phone had a *tampered* label up top- further research this is nothing to worry about.
but without the OTA file, and just entering fastboot>twrp>system, this is where the boot loop still persists. S-On is back, no longer S-Off.
I've done my research etc and aware what needs to be done, but unsure on the safe methodology to reach this point. A friend who is helping me has better knowledge for SSung Galaxies and struggling to help me along.
He detailed I need to get back to 4.4.4(to stop this pissing 'you need to update your phone' pop up) - create a back up of this, then root and then from this point I can install custom roms ETC.
How do I install this, set up phone to a point Im happy, make the back up without the boot loop stopping me from doing so, then continue with experimentation etc...?
Like I said, Ive read plenty, but it doesn't help the situation I am in, so please, please don't just tell me to go educate my self, when there's no resources to help me with my problem. I still dont know which OTA is safe for me to use, or how to inject this without the bootloop ruining my life.. again.
P.S in work, Will reply when possible.
Im on a unlocked M8, no carrier version. I rooted the device and installed TWRP. This restored my Kit Kat 4.4.4 to 4.4.2. This is the google play edition, I believe. As far as i know there is no way your android version would downgrade by flashing a recovery. Most likely is you were and still are 4.4.2
Here is the Situation.
followed a youtube guide by "unlockr" which seemed to cover every aspect. after the root and with TWRP, phone bugged me to do a update to 4.4.4, I did, went back to TWRP, booted to system and got stuck in a loop. Golden rule - Never Never Never take an OTA when running a custom recovery.
I was recommended to delete the OTA file to stop this.. I did. Didnt stop the loop, bizarre...
Along this process, In fast boot menu my phone had a *tampered* label up top- further research this is nothing to worry about.
but without the OTA file, and just entering fastboot>twrp>system, this is where the boot loop still persists. S-On is back, no longer S-Off. Also pretty sure flashing a recovery can't turn S-ON and you have to be 100% stock for that anyway (I believe) which you are not. How did you get S-OFF in the first place??
I've done my research etc and aware what needs to be done, but unsure on the safe methodology to reach this point. A friend who is helping me has better knowledge for SSung Galaxies and struggling to help me along. Samsung are completely different. I know as I've rooted my GF's and it was painful
He detailed I need to get back to 4.4.4(to stop this pissing 'you need to update your phone' pop up) - create a back up of this, then root and then from this point I can install custom roms ETC.
How do I install this, set up phone to a point Im happy, make the back up without the boot loop stopping me from doing so, then continue with experimentation etc...?
Like I said, Ive read plenty, but it doesn't help the situation I am in, so please, please don't just tell me to go educate my self, when there's no resources to help me with my problem. I still dont know which OTA is safe for me to use, or how to inject this without the bootloop ruining my life.. again No OTA's are safe to use with a custom recovery.
There are a couple of things I'm not sure on, I think you have done the following so far
1. Unlocked using HTC dev
2. Rooted using the tool kit
3. Tried to install the OTA
4. Got a boot Loop
Is that correct?
Can you get into TWRP recovery?
Also you have a thread about this open already. Either delete that thread or this one.
As far as i know there is no way your android version would downgrade by flashing a recovery. Most likely is you were and still are 4.4.2 - Nope, Upon taking out the box on day 1, there was an update required and did it straight away.. then a smaller one. Guessing thats 4.4.3 and 4.4.4.
Golden rule - Never Never Never take an OTA when running a custom recovery - hahah, Ive established this now >.< I originally saw rooting as a "inject" sort of methodology.. before the os booted.. Thats not the case!
Also pretty sure flashing a recovery can't turn S-ON and you have to be 100% stock for that anyway (I believe) which you are not. How did you get S-OFF in the first place?? - I rooted following "TheUnlockr" video guide, It did say S-OFF, Bootloop and **** up with the OTA removed this I think. This was using the Hasoon2000 AIO tool.
Samsung are completely different. I know as I've rooted my GF's and it was painful - Good to know, I wont take too much advice from him, he did highlight a tool called Odin. Would that be any benefit to myself?
1. Unlocked using HTC dev
2. Rooted using the tool kit
3. Tried to install the OTA
4. Got a boot Loop
Basically.. yes.
Yes I can get into TWRP, but as I say, when I boot to system, this is where the loop starts.. phone starts up normally.. gives me 1min before restarting over and over.
I am sorry, Im aware that another topic is open. I did try to close it, dont have permissions on account. havent used forums in a few years and its all over the shop now hahaha.
Sorry for late reply.. hectic couple of days.
Related
Guys,
My Evo says Froyo 2.2 is avail for download when I check HTC Updates... I hit accept, it downloads, then asks if I want to install NOW... I HIT YES, and it takes me to the boot loader page, THEN DOES NOTHING.. It doesn't boot into recovery mode like it is supposed to, and it just sits on the Boot loader screen, NO TRIANGLE, NO BAR on the bottom showing the progress, IT JUST SITS THERE on the boot loader page with the 3 Androids on the bottom... I have already tried to hard reset the phone, BUT that didn't work... PLEASE HELP !!! Is there a way to HARD reset my EVO BACK to BEFORE ALL OF THE UPDATES??? IS THERE A WAY TO Force boot into recovery to apply the "update.zip" ??? Please advise...
Mine did'nt go no where near the bootloader screen...
I hit the download...then it just installed like any other app...except it brought me to a bar progress page a couple of times. Then the phone rebooted and whala...froyo.
I must say this...I was previosly rooted but unrooted to do it!!!
Are you rooted or unrooted to start off with?
Was rooted, but then I did the "update of June 29th" and ruined ALL of my fun... Is there even a way for me to root my phone now??? How do I get it to go into recovery?
Same issue
My EVO ISN'T ROOTED, and I'm having the same exact problem
You're hosed root wise until someone cracks the rom, if they crack the rom. Most likely you'll need to update to the official version once HTC releases an upgrade as they claimed they would eventually do on Twitter.
im not trying to root my phone, i just want froyo
right, I WAS rooted, the update in JUNE fixed that for me =(... NOW I just want FROYO which is available from Sprint/HTC OTA, it just wont install?????????? I think I can install it as an update.zip if I could get my phone into RECOVERY mode... When at the bootloader, if I hit Recovery, it just boots back to the BOOT LOADER????
I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html
This is the route I took and was just like you...I had no probs this way!
This is a great recommendation, but I haven't done any ROOT or ROMing to my phone since I've owned it, I've stayed true to the true image they released, and I'm not comfortable downgrading it to some other image that wasn't on the phone. I attempted to do the instructions outlined and I was unable to get pas the stage of pushing the:
RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459
to the phone. It says USB error, and I have debugging mode enabled.
cardiox said:
I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-evo-4g-roms-hacks/19278-how-unroot-return-stock.html
This is the route I took and was just like you...I had no probs this way!
Click to expand...
Click to collapse
I RE-Loaded this version, as the other "older" versions would not work (re-loaded, as this is what I already HAD on my phone)... It wiped the system, and ALL of my info/apps (make sure you back up) and then I was able to do the Froyo Update... YES !!!! Thanks...
http://shipped-roms.com/shipped/Sup...51.1_Radio_2.05.00.06.10_release_CL195459.exe
I did the same, thank you !
No prob...have fun!!!
Froyo Update Won't Install
To start off - I have never rooted my evo - my phone is running Android 2.1 update 1 supersonic - and I did not try to do the "pre-release" update put out by HTC. Since late last night, I have been trying to install Froyo through system updates (settings, system updates, htc software update). I am able to download the upgrade, which is about 80 MB, but for some reason the update will not install. When I click install now, my phone restarts in the bootloader. If I click on fastboot, it searches for an image on my SD card but can't find one. If I hit recovery, it just returns me to the main bootloader screen. The only thing I can do is reboot or shut down my phone. When my phone boots back up, it says the update is downloaded and ready to be installed. I have tried redownloading the update but the same thing happens. Any help would be appreciated, preferable without losing contacts and apps. I'm trying to save a factory reset for a last resort.
Thanks,
Nick
Nick,
Please read the earlier posts, and follow the link from Cardiox... He said the following...
"I would suggest using this unroot program and make sure you use the 1.47 one because there are 3 different roms. This is what I did as I had the june update as you. This will guarantee that you have the right stock rom and are not rooted. Then try the update again...
http://forum.androidcentral.com/htc-...urn-stock.html
This is the route I took and was just like you...I had no probs this way!"
Then read my posts, and you will see that I had the SAME problem you are having, and this worked for me... I posted the thread... It is pretty easy if you follow the instructions... Let me know if it works for you... Good luck !!!
wolverinexc said:
To start off - I have never rooted my evo - my phone is running Android 2.1 update 1 supersonic - and I did not try to do the "pre-release" update put out by HTC. Since late last night, I have been trying to install Froyo through system updates (settings, system updates, htc software update). I am able to download the upgrade, which is about 80 MB, but for some reason the update will not install. When I click install now, my phone restarts in the bootloader. If I click on fastboot, it searches for an image on my SD card but can't find one. If I hit recovery, it just returns me to the main bootloader screen. The only thing I can do is reboot or shut down my phone. When my phone boots back up, it says the update is downloaded and ready to be installed. I have tried redownloading the update but the same thing happens. Any help would be appreciated, preferable without losing contacts and apps. I'm trying to save a factory reset for a last resort.
Thanks,
Nick
Click to expand...
Click to collapse
I am not a genius by no means thus I am only sharing info that I have from personal trial and error. If you are going to a bootloader screen during this update process and your SD card is mounted then you most likely will need to bite the bullet and either do a factory reset or follow the link instructions so given. For some reason this update can not find the original factory code or RUU that it is trying to update. Sounds like your SD card is mounted but it can't find it...I would strongly consider just starting over with that link program. It does not root you it just puts you back square one with factory code. Then the update will have something to build off of...which you apparently don't have for whatever reason.
Ok, this is what I needed to know. I'm backing up my stuff with bitpim and will just do this. Thanks for all the help and the speedy responses!
-Nick
Hi all.
I'll start by saying I have gotten in way over my head. I rooted my Evo with unrEVOked's one-click method, and then began to experience some problems with my 3g. Thinking I had somehow botched the rooting process, I tried to unroot using the two-step method I also found on xda (cannot post link.. further proof I am a noob ). More problems sprang up, one thing led to another, various fixes were tried (HUGE thanks to everyone in the IRC channel last night that tried to help my sorry ass..) but to no avail.
Here is where my phone is at now: booting using vol down+power shows me S-ON. Trying to flash mtd-eng.zip results in an error, so I am seemingly stuck with S-ON. Normally I would be happy about this (that's one step closer to unrooted, right?) but I notice I still have Superuser in my apps. My 3g is working again for whatever reason (no complaints here! maybe it was a Sprint-side problem in my area.. what timing!) but I'm confused as to whether my phone is rooted or not.
Ideally, I would like to go back to unrooted, since I have made it abundantly clear to myself that I am not yet prepared to embark in rooting. If anyone could guide me in the right direction, I would be very thankful.
You no longer have root access. Nothing you do at this point will allow you to run a .img on your own.
Your best bet would be to try and run one of the RUU programs to get it all back to stock.
I don't know if the Superuser application will be removed by this but you can try it:
Go to Settings>SD & Phone Storage>Factory Data Reset
Your phone should reboot and may have erased the Superuser app.
Jim M said:
You no longer have root access. Nothing you do at this point will allow you to run a .img on your own.
Your best bet would be to try and run one of the RUU programs to get it all back to stock.
I don't know if the Superuser application will be removed by this but you can try it:
Go to Settings>SD & Phone Storage>Factory Data Reset
Your phone should reboot and may have erased the Superuser app.
Click to expand...
Click to collapse
I did this, and my phone is now in RA-evo-v1.8.0 (it rebooted into recovery). Should I reboot the system now? I find it strange that it took me here in the first place.
The current PC36IMG that is flashed to the Evo is one with Amon Ra built into it.
The only RUU program that I am allowed to run (from the list that was given out in one of the unrooting evo threads) gives me the 170 error before anything happens.
You don't have root access, but your phone still has a custom recovery (Amon_RA) right now. No way to get rid of the custom recovery now except through an official update that replaces the recovery file.
Like I said you can try to run one of the RUU Official updates found in the Developer forum.
Don't know your location, but if you post it, someone close to you might try to help you out in person.
Jim M said:
You don't have root access, but your phone still has a custom recovery (Amon_RA) right now. No way to get rid of the custom recovery now except through an official update that replaces the recovery file.
Like I said you can try to run one of the RUU Official updates found in the Developer forum.
Don't know your location, but if you post it, someone close to you might try to help you out in person.
Click to expand...
Click to collapse
With a little digging and poking and reading, I found the proper RUU, ran it, and I believe I am now back to fully unrooted. Thank you very much for your help!
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
Yes you can go to software number to get the info you need. To do an OTA you need a stock sense ROM (NO CHANGES TO ANY SYSTEM APPS) you then need to flash the correct recovery for your software number and [IMPORTANT] relock the bootloader. You then can reboot into your system and take the OTA while still being able to unlock the bootloader and flash a custom recovery afterwards.
No need to relock the bootloader for an ota. People should stop spreading that info
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
ericksonline said:
Hello all, this is my first post. I'm looking for a little clarification on which stock recovery I should use so I can do OTA updates.
First, a little background. This is the first device that I've ever unlocked and rooted. I did a lot of reading before I started, but sometimes you don't really learn until you get your hands dirty. I started with an AT&T HTC One M8. I used HTCdev to unlock the bootloader, then used TWRP recovery. After that, I used Hasoon2000's All-in-one-toolkit for the Perm Root. All went as expected. I then loaded the Xposed framework and tried a couple of things with it. Suddenly, my phone started re-booting every 30 seconds or so. After panicking a bit, I figured out that there was a problem with the SuperSU. I re-applied that and all has been happy again. Since then, I also tried to obtain S-Off using the firewater method, but it failed with the Whelp message so I still only have S-On. I've now uninstalled the Xposed framework and I want to revert back to a stock recovery so I can do future OTA updates.
When I use getvar all, my version-main is blank. From what I have read, this is a common problem so I'm not worried about it. But, isn't this the number that I need to determine which stock recovery to use? Is this the same number that shows up in the Settings->About->Software information->Software number? Does the cid have any determination in which stock recovery to use?
After I do find the correct stock recovery, it is my understanding that I just flash that back to the device and it should be safe for OTA updates in the future. Is this correct?
Sorry... I'm a little gun shy after my reboot problem and I'm just looking for a little confirmation that I'm understanding things correctly before pulling the trigger again.
Thanks!
Ron
Click to expand...
Click to collapse
ericksonline said:
Thanks for the replies!
Just to check my understanding, since I simply unlocked the bootloader, used the TWRP recovery, added SuperSU, installed then uninstalled Xposed framework, that means that I should still be on a stock sense ROM (with no changes to any system apps), right?
There is a lot to learn with all of this when you are first starting out. I'm reading a lot, but sometimes you do find conflicting information. I'd rather be a little cautious than do something stupid!
Thanks again!
Click to expand...
Click to collapse
Yup you're good ROM wise. Just flash the stock recovery and you should be good to go.
You can be unlock and have OTA.
You just need a stock recovery.
HTC ONE M8 fails to load up after failed software update
Hello guys, this is my first post. I really need your help as I'm at risk of loosing all my phone data. My phone internal memory had been exhausted and I bought an external SD card. I am unable to transfer data to the external SD card. I was doing a software update on my phone that failed to install, there was a warning sign on the phone screen for a few minutes then it try to power on but has failed, as it's seem to stuck on the screen that display htc powered by android. I tried the recovery holding down the power button and the column up button, the phone power off and back on but is still stuck on this screen (htc powered by android). I tried connecting the phone to my laptop to try and recover my data, but it's not mounting to the laptop. Please can someone help me. Thanks in advance.
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
jbarr3 said:
Similar to the post above ie rooted and kept on stock. Also loaded a few Xposed modules but when I connected to my wifi I had over 30 updates so loaded all of them and once loaded the old bootloop started. I restored my nandroid backup from TWRP (this is an essential backup) and I was back in action. Phew!!!! I no longer had Xposed. So I did the updates again and the same thing happened. I am now updating one at a time which is painful when you've got so many. I also tried wiping the caches but that didn't work.
I noticed there were a lot of HTC apps eg HTC sense input, service pack, blinkfeed etc. I also notice a super SU update. ericksonlines post above said he had a problem with superSU. What kind of problem? What does he mean by reapplying? Flashing from TWRP?
So the big question. Which app(s) update did the damage???
Any apps I shouldn't update eg HTCs?
Has this happened to anyone else? What did you then do? Is the new updated superSU the problem
Apologies for cross posting on an Australian site but I'm a bit frazzled with all of this.
Click to expand...
Click to collapse
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
ericksonline said:
Hello! It is possible that an update came through that caused my phone to start into the boot loop. I'm not sure because it worked fine for a few hours before the problem started happening all of the sudden. My guess is that something updated that broke SuperSU. As soon as something would try to use SuperSU (or maybe the rights granted by SuperSU), the phone would crash and reboot. To fix the problem, I rebooted into the bootloader (TWRP) and re-installed SuperSU from there. After I re-installed, everything began working nicely again. I have not had a problem since and the problem occurred a few months ago now. I have also recently updated to the new version of SuperSU with no problems at all.
I hope this helps!
Ron
Click to expand...
Click to collapse
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
jbarr3 said:
You're dead right Ron. Supersu was the culprit. Just simply updating from the playstore caused this. I restored an android backup which got me back. I went into the old SuperSu (V1.94) and clicked "clean up when updating from google play" or similar, did the update again (v 2.04 from google) and while this didn't cause rebooting, I couldn't install the binary. I chose "normal" (maybe I should have chosen TWRP) and it didn't work. So I flashed my old v1.94 from TWRP and that got me back. So some questions on updating SuperSu.
1. Is flashing the zip file through TWRP the best way to install a new version?
2. Should I delete or uninstall the old version or will flashing do that for me? Did you simply flash over the top of the other one?
3. Should I stick with 1.94, which works, or should I update to a new and improved version?
4. I think 2.16 is the latest. What version are you running, is it stable and do you recommend it ?
5. I assume I get the zip file from chainfire. They are way ahead of the google playstore for updates
Click to expand...
Click to collapse
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
ericksonline said:
I'm no expert, but I'm happy to share my experience. I do believe that flashing from TWRP is the best way to install. That is what I did to fix my reboot problems. I don't recall uninstalling the previous version in any way. I think the old file was still on there. I browsed to it in TWRP and installed it. I'm not sure what version I was on when I did this. Recently, a new update (2.16) was available that downloaded through the Play Store. When I went to update, it recommended that I use TWRP to install. I didn't go this route because I had already switched back to the default bootloader and didn't want to reinstall TWRP if I didn't have to. So, I just used the "normal" method. It updated successfully and I've had no problems. I am now running 2.16.
Click to expand...
Click to collapse
Thanks erick but given what's happened I don't think I'll ever update from the playstore again. I'll load 2.16 using TWRP and report back. I can't stress enough how important it is to have a nandroid backup. I reckon its the best reason to load a custom recovery. Its got me out of trouble twice now and gives me piece of mind. I've actually gone overboard on this and I have two backups on my phone which I have copied to my PC..
vm54 said:
You can be unlock and have OTA.
You just need a stock recovery.
Click to expand...
Click to collapse
And stock ROM.
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
jbarr3 said:
Updated to v 2.16. Piece of cake!!!
Loaded through TWRP, rebooted and that was it. It didn't even ask about installing the binary. Same binary I guess.
It worried me, however, when I saw over 700 pages on this version xda. Most with problems.
Click to expand...
Click to collapse
Awesome! I'm glad to hear that it worked!
...because as an avid forum user, I can't stand when someone writes a new post when all of the information is right at their fingertips. BUT WAIT! This isn't one of those situations! Well sorta. The last time I was on this forum was probably when I was tapping this great resource when I got my S3 and wanted to root it. I read and read until I was fully versed on how to go about doing so. Haven't been back since. The phone has been great until about a month ago.
When the kitkat OTA update became available, I along with many other naive fools, decided to go for it only to softbrick the device. I came here and found THIS thread. I have been having some major difficulties getting through the process due to my general lack of knowledge.
I digress...when in recovery mode, my phone shows Clockwork Mod 6.0.1.4 at the top. When trying to boot normally, I get stuck on the AT&T splash screen and it goes no further.
Can anyone point me to a simple guide other than the one I linked in this post? Should I even be following that method? Any help is MUCH MUCH appreciated as I am stuck with my old Skyrocket (which isn't half bad still, except i have a lot of app compatibility problems).
I might add that I don't use custom ROMs (never got that far into it) and would like to be able to use the latest ATT rom if possible. Keeping the root would be ideal but at this point I just need my phone to WORK.
Have you tried wiping cache, dalvik, and data in recovery? Just remember that doing all 3 will wipe out any data and apps on your phone.
Before flashing anything at this point, what exactly happened when using the ota? Did it fail after a certain percentage, did it fail immediately? Error messages?
Also, that method needs to be followed EXACTLY, from using twrp to flashing back to 4.3 stock before the ota.
I don't know about cwm, but tarp has a built in terminal emulator. Go there and enter this,
getprop ro.bootloader
Let us know what it returns before doing anything else.
Sent from my SAMSUNG-SGH-T999 using Tapatalk
TL;DR Trying to get my phone to stock to accept OTA, running this rom http://forum.xda-developers.com/showthread.php?t=2485319 and unlocked bootloader/s-off with stock recovery flashed via Flashify. Anything else I should do?
So, let me preface this by saying that I am very, very new to this. I have a rooted tablet that I use, and that was a simple process. No adb commands or anything. But, when I rooted my phone using sunshine, I had no clue the world of **** I was about to get into. I rooted the phone, got a custom recovery on it, and all was going well. Until I accidentally wiped system, and was left without an OS. So, after the quick process of learning how to sideload, I got ViperOne installed on the phone and had it working. Yay for XDA help!
Not over yet though. Soon, over time, I was unable to accept calls. The phone would ring, and I would be able to answer, but no audio output and the mic wasn't picking anything up either. So, I found some fixes regarding google now voice detection, and all went well for about half an hour. Then it stopped working again. Frustrated, I bought another phone (galaxy s4), and decided I'd just get my HTC back to stock as possible.
Now for the question. I'm running this rom http://forum.xda-developers.com/showthread.php?t=2485319 , and I have the stock recovery (I flashed the recovery using Flashify, then rebooted the phone). All seems to be running well, despite the recovery flash wiping everything from the phone. My question is, seeing as I'm on that ROM, the latest firmware/radio/hboot, and stock recovery, and unlocked/s-off, could I accept and safely install the OTA when it rolls out? Thanks for any help, and sorry for writing so much!
Hey, check your Reddit post I gave you some info there.