My Korean friend that's studying here in the US recently broke the LCD on his Note II (SHV-E250S). I can only find replacement LCDs for N7100 and N7105, so I was wondering if they'd work on the E250S. Anyone have any idea? Or know of a place where I can order an LCD for Korean models?
rha_december said:
My Korean friend that's studying here in the US recently broke the LCD on his Note II (SHV-E250S). I can only find replacement LCDs for N7100 and N7105, so I was wondering if they'd work on the E250S. Anyone have any idea? Or know of a place where I can order an LCD for Korean models?
Click to expand...
Click to collapse
It should work. One way to be sure is to take the screen assembly off the device and compare the front and back with the images of the screen you intend to buy. Pay careful attention to the ribbon cable and connector! I replaced my i317 screen assembly with an n7105 screen assembly and it works fine.
absinthesummer said:
It should work. One way to be sure is to take the screen assembly off the device and compare the front and back with the images of the screen you intend to buy. Pay careful attention to the ribbon cable and connector! I replaced my i317 screen assembly with an n7105 screen assembly and it works fine.
Click to expand...
Click to collapse
Alrighty, I'll do that. Thanks!
You're welcome
hey did u fix ur problem? does the screen fit? thank you! im planning also to buy n7100 lcd and put it on a shv-e250
Hi i have the same issue. Could you please let us know if it works?
Regards
If anyone is still wondering if N7100 or N7105 parts will fit on SHV-E250S, then answer is no. Main frames, back housing and screw holes are diferent because of antenna SHV-E250S have. There are only two ways to fix it: 1. Buy full screen asembly for SHV-E250S or 2. Buy LCD and glass assembly only and glue it to your old SHV-E250S frame.
can a N7100 lcd digitizer campatable with N7105 mainboard?
Guy I have two E250K’s and can’t find frames for them, not the LCD frame, I need the one that sits on top of the motherboard and covers the sim slots. I have two SHV-E250K’s and confirm d the AUD version the N7105 is definitely different and doesn’t fit.....I need two of these frames in good condition white, black or grey it doesn’t matter, I have been having a lot of trouble finding them so any help would be greatly appreciated.
please help
i need samsung note 2 korean model shv-e250s battery connector ways .
Related
Hi everyone
I recently got a Galaxy Note 2 N7105 and dropped it, shattering the Gorilla Glass
I have looked online for a replacement Digitizer and LCD for the N7105 but I can only see the N7100 part. Speaking to some people, they said these parts are different. Is that true? Does anyone know where I can get a replacement Front panel from?
Any Assistance will be greatly appreciated.
Cheers,
Nick
NickLucas said:
Hi everyone
I recently got a Galaxy Note 2 N7105 and dropped it, shattering the Gorilla Glass
I have looked online for a replacement Digitizer and LCD for the N7105 but I can only see the N7100 part. Speaking to some people, they said these parts are different. Is that true? Does anyone know where I can get a replacement Front panel from?
Any Assistance will be greatly appreciated.
Cheers,
Nick
Click to expand...
Click to collapse
I usually buy everything from hongkong through stuff like ebay, only they also seem not to have any of these listed, which is odd and rare...
galaxy note 2 broken glass
markheloking said:
I usually buy everything from hongkong through stuff like ebay, only they also seem not to have any of these listed, which is odd and rare...
Click to expand...
Click to collapse
My galaxy note 2 LTE which is three days old was dropped from the couch on to a tiled surface . The impact has cracked the front glass only (3 -4 cracks across the glass. LCD n digitzer are fine, Spen is still working well. I have seen videos on replacing the Front glass only for galaxy s3 and original note. I can't spend $300 for a new LCD screen. I have ordered the front glass that are available on eBay ( Hong Kong). Will the GN2 glass be similar to the GS3?
Note 2 N7105 Glass,
Hy fellas, I wonder if i can buy a International I9300 Touchscreen + LCD to replace my broken AT&T I747 Broken screen.
Would that work perfectly?
I live in Brazil and i can only find the I9300 model spare parts here.
Thanks.
surfboyrio said:
Hy fellas, I wonder if i can buy a International I9300 Touchscreen + LCD to replace my broken AT&T I747 Broken screen.
Would that work perfectly?
I live in Brazil and i can only find the I9300 model spare parts here.
Thanks.
Click to expand...
Click to collapse
I am wondering the same thing. Every digi/LCD I find says i9300 and i747. But I read that the housing is different . Anyone?
I don't see why not...same specs except for the intetnals. They are sold as compatible
http://www.amazon.com/gp/aw/d/B008AT96VM
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Doesn't work, the housing is not the same. You have to buy the version without frame and chassis and glue the new lcd+digitizer glass on the old chassis.
I fixed mine this way.
If you buy I9300 International LCD+digitizer glass + assembly the back housing will not fit the chassis assembly properly on T-mobile and AT&T S3 models.
crashed display
Hey, guys.
Please tell me where I can buy the display assembly for blue phone is not expensive and without cheating.
And you should pay special attention when ordering online.
I would be grateful.
Sorry for the quality of the language, the message is written with the help of google translator.
[ does not work. the phone starts heating up with i9300 lcd
surfboyrio said:
Hy fellas, I wonder if i can buy a International I9300 Touchscreen + LCD to replace my broken AT&T I747 Broken screen.
Would that work perfectly?
I live in Brazil and i can only find the I9300 model spare parts here.
Thanks.
Click to expand...
Click to collapse
So I encountered this issue at work, (I work at a repair shop,) and ran as many button combo's, i.e. power + up / down etc, and the only way I resolved the issue was to throw another i9300 lcd assembly on it. Fired right up, the customer dropped his and must have damaged something on the assembly. We order direct OEM parts, but ebay has plent of them for around 160$ good luck!
surfboyrio said:
Doesn't work, the housing is not the same. You have to buy the version without frame and chassis and glue the new lcd+digitizer glass on the old chassis.
I fixed mine this way.
If you buy I9300 International LCD+digitizer glass + assembly the back housing will not fit the chassis assembly properly on T-mobile and AT&T S3 models.
Click to expand...
Click to collapse
:good:
Is I9300 Touchscreen + LCD compatible with i747 AT&T:?
Not compatible. For your mobile phone lcd screen replacement you can go to king-ju.com. This mobile phone parts supplier cover most of the mobile phone brands.
I have a SGH-M919 Galaxy S4 that works fine except for the touch screen (digitizer). There are no cracks on the screen and the display is fine. I see that there are a lot of guides for replacing the LCD/digitizer combo, but none that show only replacing the digitizer. Is that possible? I assume the combo consists of a front glass, the digitizer, and then the LCD. Can these be separated?
I swapped the motherboard from this S4 with the motherboard on a working S4 and the touch screen remained inoperative, so I know it is just the digitizer. Is it possible it is just the flax cable that connects to the motherboard? If so, can it be replaced by itself.
There are a lot of vendors on eBay selling LCD/digitizer combos for $100 - $200, but I hate spending that much when the screen is working fine. Any suggestions from the forum would be greatly appreciated.
Craig
CraigLD said:
I have a SGH-M919 Galaxy S4 that works fine except for the touch screen (digitizer). There are no cracks on the screen and the display is fine. I see that there are a lot of guides for replacing the LCD/digitizer combo, but none that show only replacing the digitizer. Is that possible? I assume the combo consists of a front glass, the digitizer, and then the LCD. Can these be separated?
I swapped the motherboard from this S4 with the motherboard on a working S4 and the touch screen remained inoperative, so I know it is just the digitizer. Is it possible it is just the flax cable that connects to the motherboard? If so, can it be replaced by itself.
There are a lot of vendors on eBay selling LCD/digitizer combos for $100 - $200, but I hate spending that much when the screen is working fine. Any suggestions from the forum would be greatly appreciated.
Craig
Click to expand...
Click to collapse
I also would like to know this; if anyone can explain the steps or point towards a guide that would be very helpful.
Well..After posting a thread a few days back about the display problem i was facing with my phone..It's now completely dead everything works fine except no display,It plays sound at startup even vibrate is responsive had bought this phone in USA currently in India,i've visited countless samsung service center they give me the same BS reason as parts not avalible so i wanted to ask you guys there's a way i could possibly fit i9300 LCD into i9305? and what does digitizer do? my Touch is responsive so would i need to buy both LCD and Digitizer or just teh LCD,i need it ASAP as i have my data in phone and it's locked so i can''t copy my data either,please need urgent help.
This forum is for the i747 and i747m version of the s3. You have the international version and there is a separate forum here: http://forum.xda-developers.com/galaxy-s3
The digitizer is the glass on top of the LCD that senses touch. The LCD is what you can see on the phone's screen.
I recommend replacing the digitizer and screen together as the digitizer is bonded to the LCD.
It may not be so simple because it may not be the LCD that is defective. It could be the the phone's motherboard too.
audit13 said:
This forum is for the i747 and i747m version of the s3. You have the international version and there is a separate forum here: http://forum.xda-developers.com/galaxy-s3
The digitizer is the glass on top of the LCD that senses touch. The LCD is what you can see on the phone's screen.
I recommend replacing the digitizer and screen together as the digitizer is bonded to the LCD.
It may not be so simple because it may not be the LCD that is defective. It could be the the phone's motherboard too.
Click to expand...
Click to collapse
Yeah,i figured that out,thanks btw i got a new s4 got it for cheaper price as its older model
Sent from my GT-I9500 using XDA Free mobile app
Yeah, the cost of replacing the LCD and digitizer with a really OEM Samsung is expensive which is why I look for used phones with working screens.
Hello guys. I just broke my n7100's lcd, and someone's selling me a defective n7105 but the lcd's fine. Should I buy it and just replace my n7100's lcd of n7105's? Will I face any issues? I find buying a new lcd expensive here in the Philippines. Thanks!