Develop Bugs

FULL_WIPE_1.5_EXT4_ zip - ERROR

I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)

Rainbowserpant said:
I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Click to expand...
Click to collapse
I does not even use that wipe script... just go to recovery and select "wipe everything except sdcard".. and then flash the rom.. works perfectly
GPS does not work: Check whether autorotation working or not
if it does not, flash the stock rom first before flashing jellymiui rom..
if it does, then the problem maybe lies on the hardware(attenna problem) or need a gps.conf fix..

Rainbowserpant said:
I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Click to expand...
Click to collapse
I had that same problem when I used CWM recovery. I switched to TWRP and everything was ok. You could try that

"Help" Recovery mode error "Galaxy Note 2 N7100

Hello ..... I'm trying to install CyanogenMod ROM on My 10.1 2 N7100 Galaxy Note previously and I am root and I followed all the steps you need to do for the installation, but when I'm in recovery mode and give it to install the file from the SD few seconds later I get the following error ..
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
My menu is so different that last part where it says: "Installation aborted", does not appear.
Maybe I have not installed the Recovery Version required for this installation,because even in the menu options do not appear as I have seen in other tutorials, for example:
The option "ADVANCE" to Wipe Dalvik Cache do
if anyone has answers I would be very grateful,
Greetings and thanks in advance
Sorry for my bad English

you download the recovery-twrp-2.3.2.3-N7100
then flash via odin it's working...
m.delarosa.r said:
Hello ..... I'm trying to install CyanogenMod ROM on My 10.1 2 N7100 Galaxy Note previously and I am root and I followed all the steps you need to do for the installation, but when I'm in recovery mode and give it to install the file from the SD few seconds later I get the following error ..
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
My menu is so different that last part where it says: "Installation aborted", does not appear.
Maybe I have not installed the Recovery Version required for this installation,because even in the menu options do not appear as I have seen in other tutorials, for example:
The option "ADVANCE" to Wipe Dalvik Cache do
if anyone has answers I would be very grateful,
Greetings and thanks in advance
Sorry for my bad English
Click to expand...
Click to collapse

Other Problem
Great, now I have a recovery with more options but when I'm going to give intalacion run the Zip .. gives me following warning:
"This operation may install incompatible
software and render your device unusable"
Folder:
/sdcard
File to flash:
cm-10.1-201302718-NIGHTLY-n7100.zip
Press back to cancel adding this zip.
Common options and selectable:
zip file signature verification
force MD5 check on all zip
I supposed I'm doing wrong now ..?

Try downloading and install this file perhaps http://get.cm/get/jenkins/20580/cm-10.1-20130219-NIGHTLY-n7100.zip
Note** the above is a different version of yours which it is: cm-10.1-201302718-NIGHTLY-n7100
Or you can simply try redownloading your own file again.

Flash twrp 2.4.1.0 via odin.
Sent from my GT-N7100 using xda app-developers app

[Q] Xperia S, STORAGE MOUNT problem

Hello everybody!
After successfully flashing XPERIA S with official (stable) cyanogenmod 9.1.0, I have decided to try cyanogenmod 10. After non-successfull instalation (assert failed - status 7) I decided to try 9.1.0 again but it was not working anymore (got stuck at boot animation). After reinstalling 9.1.0, I've tried to install 9.0.0 and after successfull installation I was stuck with FreeXperia logo. After that, every atempt to install any of those versions failed with status 7. At this point I could have entered phone storage and mount it on my pc (and create a whole backup using linux 'dd' command), but after next boot into clockworkmod, I was not able to mount storage anymore (I've tried it on both linux and windows). I can flash the device with fastboot and enter clockworkmod without any problems, but cannot do anything else.
Has anyone had similar problems? How can I mount the device storage on my pc again? I would appreciate if someone could help me solve this problem.
Thanks.

i would reccomend
1) Reflash to stock everthing
2) Reinstall Cyanogenmod with whatever steps necessary

llukalux said:
Hello everybody!
After successfully flashing XPERIA S with official (stable) cyanogenmod 9.1.0, I have decided to try cyanogenmod 10. After non-successfull instalation (assert failed - status 7) I decided to try 9.1.0 again but it was not working anymore (got stuck at boot animation). After reinstalling 9.1.0, I've tried to install 9.0.0 and after successfull installation I was stuck with FreeXperia logo. After that, every atempt to install any of those versions failed with status 7. At this point I could have entered phone storage and mount it on my pc (and create a whole backup using linux 'dd' command), but after next boot into clockworkmod, I was not able to mount storage anymore (I've tried it on both linux and windows). I can flash the device with fastboot and enter clockworkmod without any problems, but cannot do anything else.
Has anyone had similar problems? How can I mount the device storage on my pc again? I would appreciate if someone could help me solve this problem.
Thanks.
Click to expand...
Click to collapse
assert failed is a different issue. Open cm 10.1 package on your pc and go to meta-inf.go to com>google>updater script. Open with notepad++ and delete the first line
assert failed: getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi" something like this. and before this did you clear dalvik cache and cache and data after installing 9.1.0 or 9.0.0?

[Q] Trouble installing Gapps ACE II cm11 4.4.4 (status 7)

SOLVED read below
I was just installing cm11.0_codina.nova.20140623 (mclaw) from stock 4.1 without any alternation, following instructions:
Reboot to recovery mode
Select "Wipe data / Factory Reset"
Select "Install the zip from External Storage"
Choose the CM zip file: -> cm11.0_codina.nova.20140623 (mclaw)
Choose the GApps zip file: -> pa_gapps-modular-micro-4.4.4-20140620-signed
and get the message after mounting system...
file_getprop: failed to start "/system/build.prop": No such file or directory
E:Error in /tmp/sideload/package.zip
(status 7)
What's going wrong, also tried the mini gapps , same message, both checked md5.
So just to be clear i have nothing extra installed like CWM as it is not stated in tutorial. Just with the native bootmenu as it is.
So what can i try next? It boots fine but without gapps its not complete.
EDIT:
I've rebooted and now came in different bootmenu where the installation went fine, so i guess it needed a reboot what was missing in instructions.

DriversSeat said:
SOLVED read below
I was just installing cm11.0_codina.nova.20140623 (mclaw) from stock 4.1 without any alternation, following instructions:
Reboot to recovery mode
Select "Wipe data / Factory Reset"
Select "Install the zip from External Storage"
Choose the CM zip file: -> cm11.0_codina.nova.20140623 (mclaw)
Choose the GApps zip file: -> pa_gapps-modular-micro-4.4.4-20140620-signed
and get the message after mounting system...
file_getprop: failed to start "/system/build.prop": No such file or directory
E:Error in /tmp/sideload/package.zip
(status 7)
What's going wrong, also tried the mini gapps , same message, both checked md5.
So just to be clear i have nothing extra installed like CWM as it is not stated in tutorial. Just with the native bootmenu as it is.
So what can i try next? It boots fine but without gapps its not complete.
EDIT:
I've rebooted and now came in different bootmenu where the installation went fine, so i guess it needed a reboot what was missing in instructions.
Click to expand...
Click to collapse
search, dude... -.-
Sent from my GT-I8160 using Tapatalk

teddytsen said:
search, dude... -.-
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
U can't expect people to read everything that comes up in search, after 20 pages im done and ask a question. But it's solved now and maybe now other people can eat the fruits of my question... o.-

just something like that
http://www.droidviews.com/download-google-apps-gapps-for-your-android-device-on-gbicsjb/
Code:
Warning:
Do not try to install the Google Apps package via Stock Recovery or you might get “signature verification” error, and if installed it might create internal conflicts. If you have to update a Google app, do it via Google Play Store or by installing the APK file manually if you have it.

(Solved) L310: rooted but unable to install CM12.1 - Error-Message included

Hi,
after giving 4.4.2-StockROM a (long) try, I wanted to install [SM-T31X][5.1.1] CyanogenMod 12.1 unofficial build (by tohenk).
I followed the instruction for TWRP-Installation and the one for CM12.1 by tohenk.
Doing so, I installed TWRP via Odin 3.09 (successful).
To root the T310, I had to install the zip "ROOT_SGT3_8.0.zip". (also successful)
Reentering TWRP to flash the CM12.1-zip, I selected the file from internal SD-Card, getting a warning that the file shall not be compatible - having had the same with the root-zip, i swiped to install.
Resulting in the error (got a screenshot, but can't link it - to few posts):
"Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/fw/cm-12.1-20151018-UNOFFICIAL-lt01wifi.zip'
Error flashing zip '/sdcard/fw/cm-12.1-20151018-UNOFFICIAL-lt01wifi.zip"
... as offered by TWRP, i reset the Dalvik-Cache, rebooted. All Apps have been reinitialized, rebooted again into TWRP, getting the same Error.
So I installed philz_touch_6.08.9-lt01wifi.zip - but getting the same Error...
At the moment, I'm stucked with rooted StockROM...
..what did I miss?
(thanks for any help)
- - - - - - -
Edit:
Found the error:
prepareing the Flash-Procedure, I did a "factory reset" from within StockROM-Settings.
After performing a Factory-Reset out of PhilzTouch and wiping Dalvik-Cache (without rebooting the GT3 after Wiping), I was capable to install the CM12.1-zip, which runs perfectly fine now...
(somewhere it should be mentioned "do the factory reset from recovery, not from within ROM"
tohenk: you did a wonderful Job on the CM12.1-ROM! Thank you!!

I'm having the same issue.... so I installed Philz_touch_6.19.3 but I still can't flash any of the ROM's for T310...
Do you have any suggestions?
My tablet start up to SAMSUNG TAB 3 logo and stuck there...