FULL_WIPE_1.5_EXT4_ zip - ERROR - Desire HD Q&A, Help & Troubleshooting

I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)

Rainbowserpant said:
I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Click to expand...
Click to collapse
I does not even use that wipe script... just go to recovery and select "wipe everything except sdcard".. and then flash the rom.. works perfectly
GPS does not work: Check whether autorotation working or not
if it does not, flash the stock rom first before flashing jellymiui rom..
if it does, then the problem maybe lies on the hardware(attenna problem) or need a gps.conf fix..

Rainbowserpant said:
I recently tried to flash JellyMIUI_3.1.11_v2 custom rom on my HTC Desire HD.
Install instructions suggest to install FULL_WIPE_1.5_EXT4_ zip from sd card.
When attempting to intall full wipe i get the following error:
-Model ID - HTC Ace
-Ok to proceed
Now preparing for a clean install of any EXT4 ROM
Please be patient
1st boot may take a few minutes
-Formatting Data
-Formatting System
E: Error in /sdcard/FULL_WIPE_1.5_EXT_.zip
(status 1)
Installation aborted
Does anyone know why I would be getting this error or how to fix?
Despite this error I am still able to install the JellyMIUI_3.1.11_v2 custom rom although GPS does not work (not sure if this related)
Click to expand...
Click to collapse
I had that same problem when I used CWM recovery. I switched to TWRP and everything was ok. You could try that

Related

[Q] MIUI Defy stuck on Moto screen

Hey everyone, I am having some issues.
I had MIUI up and running for about a day but the Android market wouldn't work, I found the proper .zip and decided to flash it. I loaded up the clockwork apk and rebooted it...no here is where my problem begins. It didnt load up to the loader, it just got stuck at the red moto screen. Also I used the one click rooting program to root it.
I have so far tried the following:
Cahce Wipe
Data Wipe
Re-Installing MIUI (says that the signature cant be verified).
Also I get the following at the Android System Recovery
E: Cant mount CACHE:recovery/command
E: Cant mount CACHE: recovery/caller
E: Cant mount CACHE: recovery/log
Any ideas? Im a bit of a newb and would like to get the phone running (its my alarm clock lol)
Flash Froyo with RSDLite and then flash with the CWM the MIUI ROM
what is installed in your phone ?
type to install Cmiui its one of the good ROM i am using same
i have installed 2.1 but you install 1.8 or 2.0 its working fine.
here is the link of that ROM
http://forum.xda-developers.com/showthread.php?t=1268997
download --> go to recovery mod --> wipe data and cache --> install zip from SD card --> select zip and wait for some mins and your phone will start cmiui
Regards,
cheat.

[Q] GPS not working HTC Desire HD with Jelly Miui 3.1.11 Custom ROM

I have installed the Jelly Miui 3.1.11 custom ROM on my HTC Desire HD, and i'm loving this ROM execpt my GPS is not working (but 3G and WI FI working fine).
Is there something wrong with my install or are these comon bugs with this custom rom?
Does anyone know a fix for these problems?
HISTORY (I am noob but have somehow got this far without bricking my phone)
1. I rooted my phone last year with the ace hack kit from XDA which enabled me to break free.
2. First I installed [Blackout ICS Incredible v3.0.0.0] custom ROM which was exciting for first cutom ROM experience but only OK.
3. I then tried [CodefireX 4.2 Builds by synergye] which was OK but I found it bad 3G and GPS bugs.
4. I have now installed [JellyMIUI_3.1.11_v2] which is AWESOME but GPS not working (So disappointed as this is the best ROM by far so far).
Note: Whenever installing custom ROM's I have followed install instructions on XDA thread for the ROM and installed ROM zip file from SD card via ClockworkMod.
Note: XDA [JellyMIUI_3.1.11_v2] install instructions suggest to Full wipe using this "FULL_WIPE_1.5_EXT4_" ZIP file before installing the ROM zip. At this stage during wipe I get the following error when it gets to Formatting Cache stage:
/cache unmounted E: Error in / sdcard/FULL_WIPE_1.5_EXT4_.zip
(Status 1)
Installation aborted.
E: Can't open /cache/recovery log
E: Can't open /cache/recovery log
E: Can't open /cache/recovery last_log
E: Can't open /cache/recovery last_log
Even though I get this error during wipe I continue to install the [JellyMIUI_3.1.11_v2] zip from sd card after the Full Wipe error and the ROM seems to install ok (except my GPS doesn't work)?
Other Notes:
While using [JellyMIUI_3.1.11_v2] I received a notification that an OTA update to 3.1.18 was available, however when I select the update it fails to download.
I then updated to 3.1.18 via clockworkmod update from zip which worked, however still no GPS and also now no WI FI available.
I then downgraded back to 3.1.11 via clockworkmod update from zip again, still no GPS but WI FI is working again.
PLEASE HELP

"Help" Recovery mode error "Galaxy Note 2 N7100

Hello ..... I'm trying to install CyanogenMod ROM on My 10.1 2 N7100 Galaxy Note previously and I am root and I followed all the steps you need to do for the installation, but when I'm in recovery mode and give it to install the file from the SD few seconds later I get the following error ..
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
My menu is so different that last part where it says: "Installation aborted", does not appear.
Maybe I have not installed the Recovery Version required for this installation,because even in the menu options do not appear as I have seen in other tutorials, for example:
The option "ADVANCE" to Wipe Dalvik Cache do
if anyone has answers I would be very grateful,
Greetings and thanks in advance
Sorry for my bad English
you download the recovery-twrp-2.3.2.3-N7100
then flash via odin it's working...
m.delarosa.r said:
Hello ..... I'm trying to install CyanogenMod ROM on My 10.1 2 N7100 Galaxy Note previously and I am root and I followed all the steps you need to do for the installation, but when I'm in recovery mode and give it to install the file from the SD few seconds later I get the following error ..
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
My menu is so different that last part where it says: "Installation aborted", does not appear.
Maybe I have not installed the Recovery Version required for this installation,because even in the menu options do not appear as I have seen in other tutorials, for example:
The option "ADVANCE" to Wipe Dalvik Cache do
if anyone has answers I would be very grateful,
Greetings and thanks in advance
Sorry for my bad English
Click to expand...
Click to collapse
Other Problem
Great, now I have a recovery with more options but when I'm going to give intalacion run the Zip .. gives me following warning:
"This operation may install incompatible
software and render your device unusable"
Folder:
/sdcard
File to flash:
cm-10.1-201302718-NIGHTLY-n7100.zip
Press back to cancel adding this zip.
Common options and selectable:
zip file signature verification
force MD5 check on all zip
I supposed I'm doing wrong now ..?
Try downloading and install this file perhaps http://get.cm/get/jenkins/20580/cm-10.1-20130219-NIGHTLY-n7100.zip
Note** the above is a different version of yours which it is: cm-10.1-201302718-NIGHTLY-n7100
Or you can simply try redownloading your own file again.
Flash twrp 2.4.1.0 via odin.
Sent from my GT-N7100 using xda app-developers app

(Solved) L310: rooted but unable to install CM12.1 - Error-Message included

Hi,
after giving 4.4.2-StockROM a (long) try, I wanted to install [SM-T31X][5.1.1] CyanogenMod 12.1 unofficial build (by tohenk).
I followed the instruction for TWRP-Installation and the one for CM12.1 by tohenk.
Doing so, I installed TWRP via Odin 3.09 (successful).
To root the T310, I had to install the zip "ROOT_SGT3_8.0.zip". (also successful)
Reentering TWRP to flash the CM12.1-zip, I selected the file from internal SD-Card, getting a warning that the file shall not be compatible - having had the same with the root-zip, i swiped to install.
Resulting in the error (got a screenshot, but can't link it - to few posts):
"Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/fw/cm-12.1-20151018-UNOFFICIAL-lt01wifi.zip'
Error flashing zip '/sdcard/fw/cm-12.1-20151018-UNOFFICIAL-lt01wifi.zip"
... as offered by TWRP, i reset the Dalvik-Cache, rebooted. All Apps have been reinitialized, rebooted again into TWRP, getting the same Error.
So I installed philz_touch_6.08.9-lt01wifi.zip - but getting the same Error...
At the moment, I'm stucked with rooted StockROM...
..what did I miss?
(thanks for any help)
- - - - - - -
Edit:
Found the error:
prepareing the Flash-Procedure, I did a "factory reset" from within StockROM-Settings.
After performing a Factory-Reset out of PhilzTouch and wiping Dalvik-Cache (without rebooting the GT3 after Wiping), I was capable to install the CM12.1-zip, which runs perfectly fine now...
(somewhere it should be mentioned "do the factory reset from recovery, not from within ROM"
tohenk: you did a wonderful Job on the CM12.1-ROM! Thank you!!
I'm having the same issue.... so I installed Philz_touch_6.19.3 but I still can't flash any of the ROM's for T310...
Do you have any suggestions?
My tablet start up to SAMSUNG TAB 3 logo and stuck there...

Twrp bootloop

Hello,
i just unlocked bootloader and installed twrp and it all went fine..
until i wanted to fully wipe my device, i did this via twrp.
after 20Minuts, nothing happend, the bar was still white and gray (not even a little bit blue)
and it kept stuck on ''twrp formatting data using make_ext4fs function''.
i knew this wasn't a good idea, but i decided to turn off my phone,
and now, everytime when i turn it on on the normal way it just redirrects me to TeamWin in a bootloop.
even if i want to go to recovery mode i keep stuck in that bootloop, so there is nothing i can do right now, i only can stick at Fastboot Mode but nothing else,
Is there any way to fix this problem?
Using ASUS ZENFONE 2 551ML
I hope you did a backup of your system before? Otherwise just download the latest full image:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.174-user.zip
place it on your internal sdcard (via adb push) and then flash it normally with TWRP. Please note that the procedure can take up to 30 minutes, where the formatting is the procedure taking the longest time...
TheSSJ said:
I hope you did a backup of your system before? Otherwise just download the latest full image:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-WW-2.20.40.174-user.zip
place it on your internal sdcard (via adb push) and then flash it normally with TWRP. Please note that the procedure can take up to 30 minutes, where the formatting is the procedure taking the longest time...
Click to expand...
Click to collapse
How to he flash stock rom by twrp?
Download and flash this via twrp http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Make sure you flash Supersu before you flash the rom.
mr_gourav2000 said:
How to he flash stock rom by twrp?
Click to expand...
Click to collapse
It's all written there...adb push on the phone, flash the zip normally via twrp, wait and done
TheSSJ said:
It's all written there...adb push on the phone, flash the zip normally via twrp, wait and done
Click to expand...
Click to collapse
but i cant use twrp on my phone because its stuck in bootloop, or what do you mean? (english not my main language)
please give me some proper step by step instructions, i would really apreciate that!
thanks anyway your awesome!
Man, I misread your post, sorry...I thought you could boot only into twrp
If you still have fastboot, why not flashing twrp 2.8.x.x?
Code:
Fastboot flash recovery nameofrecovery.img
Fastboot reboot recovery
Otherwise you could flash stock system with this guide: http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
It's a lot to read
wow, that is something really helpfull, there is still hope to revive my phone
i'll let you know how it turnt out xd
thanks alot!!
i fixed recovery mode, so thats already one step further. Oefff @TheSSJ thanks for the help.
But now i get some other problems, when i try to wipe my phone i get the error like ''unable to mount /data'' and ''unable to wipe dalvik''
and all other kinds of these errors, i get the same problem when i was installing rom. isn't there anything or a way to fully wipe all this **** so i can install a fresh rom.
i flashed custom rom and this is error log i get. its all full written down.
E: could not mount /data and unable to find crypto footer.
E: unable to mount /data
E: unable to recreate /data/media folder.
updating partition details...
E: unable to mount /data
... done
E: unable to mount storage.
E: unable to mount /data/media during GUI startup
Full SELinux support is present.
E: unable to mount /data/media/twrp. twrps when trying to read settings file.
E:unable to mount /data
MTP enabled
E: unable to mount /data
E: unable to mount /data
E: unable to mount /data
Installing external_sd/UL-Z00A-WW-2.20.40.174-user.zip ...
Checking for MD5 file...
Skipping MD5 check: no MD5 File found
Device image SKU:
OTA image SKU: WW
assert failed: getprop ("ro.build.asus.sku") == ''WW''
E: Error executing updater binary in zip '/external_sd_UL-Z00A-WW-2.20.40.174-user.zip'
Error flashing zip '/external_sd_UL-Z00A-WW-2.20.40.174-user.zip'
Updating Partition Details...
E:unable to mount /data
... done
E: unable to mount storage.
Failed
Seems you don't have a WW image installed, do you have a CN Software? Then you need another Software of course
what do you mean with ww & cn software?
sorry but im new in this.. but im really interested so can you please explain a little bit?
how can i get this other software! thanks!!!
Where did you buy your Phone? what does the packaging state? WW, CN, TW, etc? These 2 letters must be written in uppercase somewhere, then we will know which software to flash, there is a check where your phone's software is compared to the zip you are trying to flash:
assert failed: getprop ("ro.build.asus.sku") == ''WW''
Which TWRP did you flash?
ohhh yes, i do have CN software Probably, as it is buyed from china.
Where can i find this other type software?
thanks!
colldor200 said:
ohhh yes, i do have CN software Probably, as it is buyed from china.
Where can i find this other type software?
thanks!
Click to expand...
Click to collapse
There you go: http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE551ML/UL-Z00A-CN-2.20.40.159-user.zip
I think flashing will still fail though...but pls try first,maybe it'll work
i tryed it, i get the same error :/
Update: i changed from CN to WW.
Because of this i reflashed to twrp 3.0 and it works properly and now wiping shows no problem anymore.
I also got the WW ota zip but dont know how to install that.
Anyway, i tryed to install xaosp rom (even if my ota is still CN)
And it showed no problems at all!
BUT when i tryed to startup my phone it sticks with the asus logo and wont go any further, not a bootloop, it just sticks at the asus logo.
We are Always getting more and more steps further into fixing my phone, thanks for that @TheSSJ were almost there ?
colldor200 said:
Update: i changed from CN to WW.
Because of this i reflashed to twrp 3.0 and it works properly and now wiping shows no problem anymore.
I also got the WW ota zip but dont know how to install that.
Anyway, i tryed to install xaosp rom (even if my ota is still CN)
And it showed no problems at all!
BUT when i tryed to startup my phone it sticks with the asus logo and wont go any further, not a bootloop, it just sticks at the asus logo.
We are Always getting more and more steps further into fixing my phone, thanks for that @TheSSJ were almost there
Click to expand...
Click to collapse
You could try flashing cm13 first and then xosp:
First wipe data/cache
Then flash cm13
Boot up and hope that it works
Reboot to recovery
Wipe data/cache
Flash xosp and maybe a kernel that fits (FlareM?)
Boot to system again
You could try flashing cm13 first and then xosp:
First wipe data/cache
Then flash cm13
Boot up and hope that it works
Reboot to recovery
Wipe data/cache
Flash xosp and maybe a kernel that fits (FlareM?)
Boot to system again
Click to expand...
Click to collapse
sorry for the kinda late answer, but yes i followed your instructions, and it works completely, after cm13 i also immediately installed gapps.
i skipped xaosp im fine with cm13
Thanks alot @TheSSJ for all the help my phone is fully fixed now and even working faster then before its like super fast.
thanks again your great!

Categories

Resources