I have downloaded the CM11 package from the Cyanogenmod website and the Gapps from goo.im. Whenever I try to flash any of them, I get an error with E: and whatever usually comes after that with Failed in red. Does it have something to do with being on rooted stock KitKat? If you can help, thanks. The stock lags badly and the battery drains fast.
kernelpanic_ said:
I have downloaded the CM11 package from the Cyanogenmod website and the Gapps from goo.im. Whenever I try to flash any of them, I get an error with E: and whatever usually comes after that with Failed in red. Does it have something to do with being on rooted stock KitKat? If you can help, thanks. The stock lags badly and the battery drains fast.
Click to expand...
Click to collapse
well did you download the D2LTE version of CM11 and check the MD5? also have you tried with other recoveries? you can also try Wicked X 8.0 or Tribute Rom which are based on stock
6th_Hokage said:
well did you download the D2LTE version of CM11 and check the MD5? also have you tried with other recoveries? you can also try Wicked X 8.0 or Tribute Rom which are based on stock
Click to expand...
Click to collapse
Thanks for the advice. I'll remember to check after I get home today.
6th_Hokage said:
well did you download the D2LTE version of CM11 and check the MD5? also have you tried with other recoveries? you can also try Wicked X 8.0 or Tribute Rom which are based on stock
Click to expand...
Click to collapse
I've flashed the d2lte and it works! Thank you so much
Related
I haven't seen a thread yet for this so I thought I'd post for those that need it.
http://goo.gl/79ztJ7
This is the link to the official site and download list for the Sprint Galaxy s3 only. I am not the developer nor have I compiled anything on this list. I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE. USE AT YOUR OWN RISK.
Also here are the recommended gapps...... UPDATED(I recommend full modular package)
http://forum.xda-developers.com/showthread.php?t=2397942
Installation instructions:
CLEAN FLASH:
-full wipe(necessary if new to cm 11 official nightlies)
-flash rom
- flash gapps
-flash a 4.4 compatible kernel(optional not necessary) I use BMS
-wipe dalvik and cache
- reboot and enjoy
DIRTY FLASH: (probably not recommended but I do it)
-wipe dalvik, cache, and system only
-flash rom
-flash gapps
-flash kernel if using a custom kernel
-wipe dalvik and cache again(not necessary but I always do to be safe)
*You may flash using the latest CWM or the latest TWRP recovery.
**ALWAYS MAKE A NANDROID BACKUP BEFORE YOU WIPE JUST IN CASE
The link is for all releases. Check daily. ENJOY:thumbup:
For those who prefer custom kernels, here is the recommended kernel:
http://forum.xda-developers.com/showthread.php?t=2134894
P.S. ART IS WORKING GREAT NO NEED TO FLASH SUPERSU... BUT AGAIN, FLASH AT YOUR OWN RISK
Sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
First! I was waiting for this release
AlkaliV2 said:
First! I was waiting for this release
Click to expand...
Click to collapse
It's been out.
Go here: http://d-h.st/users/Cjen1987/?fld_id=28992#files
I updated it with twrp installing and camera fix.
I add it to each build that comes out.
Cjen1987 said:
It's been out.
Go here: http://d-h.st/users/Cjen1987/?fld_id=28992#files
I updated it with twrp installing and camera fix.
I add it to each build that comes out.
Click to expand...
Click to collapse
I already install official nightly with twrp. And also camera works great. Your fixes ain't needed bruh
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
My first "First" post and someone has to take the wind out of my sails
I did see the other two releases for CM11 (SmasherX and the Unofficial) but I didn't know if CM was officially going to support our device. So I'm glad an official release is out and has the CM team and Bad.Fish behind it.
So thanks to both of you for getting CM11 into our hands so I can harass my phone by saying "OK Google"
Working great for me. Does LTE work? I cant test it here.
Has anyone gotten the built in wifi tether to work.. Bluetooth teether works but I error out when starting the wifi teether. Just wondering if this has been enabled yet in the nightlies.. Any help appreciated. I have searched the threads and no mention of it thanks
afail said:
Working great for me. Does LTE work? I cant test it here.
Click to expand...
Click to collapse
LTE works fine for me.
Running the CM-11 12-8 nightly with CM-KK Gapps, flashed with latest TWRP recovery. I think this might be running better than 4.3 ever ran. Everything is working well that I have experienced so far. Been running for 3 days. I am running Dalvik. Tried ART. Can't say that I noticed any speed improvement. I did get a single error popping up. It was something about Google text to speech. That was the only error I got running ART on my current setup. This is awesome. Wasn't sure if we would get to experience KitKat on thus device. Thanks.
Sent from my SPH-L710 using Tapatalk
StuckinMemphis said:
Running the CM-11 12-8 nightly with CM-KK Gapps, flashed with latest TWRP recovery. I think this might be running better than 4.3 ever ran. Everything is working well that I have experienced so far. Been running for 3 days. I am running Dalvik. Tried ART. Can't say that I noticed any speed improvement. I did get a single error popping up. It was something about Google text to speech. That was the only error I got running ART on my current setup. This is awesome. Wasn't sure if we would get to experience KitKat on thus device. Thanks.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Errors are from the gapps. Use the ones in OP link. Make sure its the 4.4.1. and not the 4.4.2 or you will also get errors
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Has anyone had any issues with Wi-Fi tether on 12-11 release? Dirty flashed but wanted to see if anyone might have clean flashed and experienced the same thing on this build before I start over...
Sent from my SPH-L710 using Tapatalk
Bad.Fish said:
Errors are from the gapps. Use the ones in OP link. Make sure its the 4.4.1. and not the 4.4.2 or you will also get errors
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Click to expand...
Click to collapse
Thanks Bad Fish. Can I just reflash the ROM with the proper gapps clearing Dalvik and cache or do I have to do a complete wipe of everything?
StuckinMemphis said:
Thanks Bad Fish. Can I just reflash the ROM with the proper gapps clearing Dalvik and cache or do I have to do a complete wipe of everything?
Click to expand...
Click to collapse
I would clean flash to be safe.
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Bad.Fish said:
I would clean flash to be safe.
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Click to expand...
Click to collapse
I dirty flashed with cleaning just dalvik and so far it looks very good..
Ugh, every time I flash it kills my rear camera until I load a tw ROM and literally pull the camera from my phone
I have jk camera version
[s5c73m3_get_sensor_fw_version : 2761] sensor_fw = ZKFI07
[s5c73m3_wait_ISP_status : 485] FAIL : ISP has been not prepared!! : 0x0x1
Sent from my SPH-L710 using xda app-developers app
dubsides said:
Ugh, every time I flash it kills my rear camera until I load a tw ROM and literally pull the camera from my phone
I have jk camera version
[s5c73m3_get_sensor_fw_version : 2761] sensor_fw = ZKFI07
[s5c73m3_wait_ISP_status : 485] FAIL : ISP has been not prepared!! : 0x0x1
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Maybe you should clean flash with the recommended gapps above... I have no camera issues at all
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Any word on when 4.4.2 will be merged?
FatalIll said:
Any word on when 4.4.2 will be merged?
Click to expand...
Click to collapse
it's already been merged
SOHKis said:
it's already been merged
Click to expand...
Click to collapse
Are you sure? I dont see it here unless I'm retarded.
I'm still on 12/10
FatalIll said:
Are you sure? I dont see it here unless I'm retarded.
I'm still on 12/10
Click to expand...
Click to collapse
keep looking - https://plus.google.com/+CyanogenMod/posts/Q9Ekfg8RCTM
Hey Guys!
I'm a CM user since the beggining of times and I missed Photosphere for our One.
So I put togheter a flash zip for CM11 wich will enable Photosphere and will survive nightlies updates like gapps, only have to flash it once :good:
Should work for other AOSP Roms, PA, OMNI and so on.
Enjoy and don't forget to hit the button
Download CM11_HTC_One_Photosphere-Module-4.4.2_modded_by_eng.stk.zip, flash and profit :highfive:
MD5 hash: 306461B0309F05EA301B0C6BF49B972C
Install failed on D2-ATT running Gummy 4.4.2 nightly.
eng.stk said:
Hey Guys!
I'm a CM user since the beggining of times and I missed Photosphere for our One.
So I put togheter a flash zip for CM11 wich will enable Photosphere and will survive nightlies updates like gapps, only have to flash it once :good:
Should work for other AOSP Roms, PA, OMNI and so on.
Enjoy and don't forget to hit the button
Download CM11_HTC_One_Photosphere-Module-4.4.2_modded_by_eng.stk.zip, flash and profit :highfive:
MD5 hash: 306461B0309F05EA301B0C6BF49B972C
Click to expand...
Click to collapse
getinlost said:
Install failed on D2-ATT running Gummy 4.4.2 nightly.
Click to expand...
Click to collapse
Probably because you're not using an HTC one.
getinlost said:
Install failed on D2-ATT running Gummy 4.4.2 nightly.
Click to expand...
Click to collapse
dbaler said:
Probably because you're not using an HTC one.
Click to expand...
Click to collapse
Exactly.
Sent from my HTC One using Tapatalk
guys please help me out as i'm new member i cannot post it in concern thread., i have tried to flash DN3 v4.1 BETA2 with philz recovery 5.15 and my installer ends like this (attached image of my device) it doesn't even run aroma installer and after reboot of installation i just stuck with samsung boot animation for a long time more than 20 mins..
First of all you have to update can to version 6.19.3.
When choosing install zip you have to check that the old binary is allowed to be updated. Than it should work.
Here you go for the right post!
http://forum.xda-developers.com/showthread.php?p=51078746
Otherwise you can use twrp instead of PhilZ. It's working properly on 4.4 Roms!
Sent from my GT-N7100 using XDA Premium 4 mobile app
GaneshMJ said:
guys please help me out as i'm new member i cannot post it in concern thread., i have tried to flash DN3 v4.1 BETA2 with philz recovery 5.15 and my installer ends like this (attached image of my device) it doesn't even run aroma installer and after reboot of installation i just stuck with samsung boot animation for a long time more than 20 mins..
Click to expand...
Click to collapse
Mephistd said:
First of all you have to update can to version 6.19.3.
When choosing install zip you have to check that the old binary is allowed to be updated. Than it should work.
Here you go for the right post!
http://forum.xda-developers.com/showthread.php?p=51078746
Otherwise you can use twrp instead of PhilZ. It's working properly on 4.4 Roms!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I agree it's best to flash the ROM via twrp 2.6.3.2 and under "wipe" go to advanced and then select the first 4 options to wipe and then re install the ROM ,also you wont get that "(x) update old binary" message when using TWRP,also v4.x of DN3 rom is NOT aroma
singhpratik87 said:
I agree it's best to flash the ROM via twrp 2.6.3.2 and under "wipe" go to advanced and then select the first 4 options to wipe and then re install the ROM ,also you wont get that "(x) update old binary" message when using TWRP,also v4.x of DN3 rom is NOT aroma
Click to expand...
Click to collapse
I was able to flash the ROM via twrp latest version and I always wipe the way you said. However the ROM doesn't boot up.. Its just stuck at Samsung logo. Waited like 15 min. I have tried more than one 4.4.2 ROM but they don't boot.. I don't know why..
Sent from my GT-N7100 using Tapatalk
Mohammed779 said:
I was able to flash the ROM via twrp latest version and I always wipe the way you said. However the ROM doesn't boot up.. Its just stuck at Samsung logo. Waited like 15 min. I have tried more than one 4.4.2 ROM but they don't boot.. I don't know why..
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Which rom are you coming from? And which other 4.4.2 ROM have you tried apart from DN3?
Sent from my GT-N7100 using Tapatalk
singhpratik87 said:
Which rom are you coming from? And which other 4.4.2 ROM have you tried apart from DN3?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2672758
I tried coming from both 4.3 Samsung based ROMs and 4.4.2 CM based.
Mohammed779 said:
http://forum.xda-developers.com/showthread.php?t=2672758
I tried coming from both 4.3 Samsung based ROMs and 4.4.2 CM based.
Click to expand...
Click to collapse
Try re installing DN3 V4.1 again via clean wipe ,users in that thread have reported it flashed for them after 2-3 attempts,if it still doesn't boot for you report this in that thread and someone would be able to help you
Anyone has link to newest PhilZ?
Sent from my GT-N7100 using Tapatalk
Found it! ?
nordvik said:
Anyone has link to newest PhilZ?
Sent from my GT-N7100 using Tapatalk
Found it! ?
Click to expand...
Click to collapse
unable to post external link., kindly check you pm
nordvik said:
Anyone has link to newest PhilZ?
Sent from my GT-N7100 using Tapatalk
Found it! ?
Click to expand...
Click to collapse
singhpratik87 said:
I agree it's best to flash the ROM via twrp 2.6.3.2 and under "wipe" go to advanced and then select the first 4 options to wipe and then re install the ROM ,also you wont get that "(x) update old binary" message when using TWRP,also v4.x of DN3 rom is NOT aroma
Click to expand...
Click to collapse
Mephistd said:
First of all you have to update can to version 6.19.3.
When choosing install zip you have to check that the old binary is allowed to be updated. Than it should work.
Here you go for the right post!
http://forum.xda-developers.com/showthread.php?p=51078746
Otherwise you can use twrp instead of PhilZ. It's working properly on 4.4 Roms!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried both the options before itself
GaneshMJ said:
Tried both the options before itself
Click to expand...
Click to collapse
i suggest you try flashing 4.3 samsung TW ROM or try aosp CM11 based 4.4.2 ROM,use twrp 2.6.3.1/2.6.3.2 for them as well,let me know if those flash fine for you.Thing is many users have been reporting that this ROM doesn't flash correctly for them even after following all the steps correctly.The rom is in beta stages so bugs are there,in the mean time go back to 4.3 TW rom or if you want a taste of kitkat flash this rom which i use from time to time when i get bored of 4.3 samsung roms http://forum.xda-developers.com/showthread.php?t=2336271
singhpratik87 said:
i suggest you try flashing 4.3 samsung TW ROM or try aosp CM11 based 4.4.2 ROM,use twrp 2.6.3.1/2.6.3.2 for them as well,let me know if those flash fine for you.Thing is many users have been reporting that this ROM doesn't flash correctly for them even after following all the steps correctly.The rom is in beta stages so bugs are there,in the mean time go back to 4.3 TW rom or if you want a taste of kitkat flash this rom which i use from time to time when i get bored of 4.3 samsung roms http://forum.xda-developers.com/showthread.php?t=2336271
Click to expand...
Click to collapse
Thanks.. Sure i will give a try but i love DN3 roms..
GaneshMJ said:
Thanks.. Sure i will give a try but i love DN3 roms..
Click to expand...
Click to collapse
well the developers are working hard on it and trying to make it more stable,so in the meantime get a working ROM on your note 2 and keep following the DN3 for updates,that's what i've been doing i haven't flashed the DN3 Kitkat rom at all,just been following the thread and reading about bugs and fixes,reading what people got to say about ROM and just keeping myself up to date .Personally i am waiting for @mannyvinny to release the 4.4.2 Version of the leaked ROM,i've been using his 4.3 TW ROM and never had any issues and his themes/mod are awesome.The thread to his link is this http://forum.xda-developers.com/showthread.php?t=2593200 ,bookmark it and i think by next weekend or so he'll have 4.4.2 v1 up !Good luck:good:
singhpratik87 said:
well the developers are working hard on it and trying to make it more stable,so in the meantime get a working ROM on your note 2 and keep following the DN3 for updates,that's what i've been doing i haven't flashed the DN3 Kitkat rom at all,just been following the thread and reading about bugs and fixes,reading what people got to say about ROM and just keeping myself up to date .Personally i am waiting for @mannyvinny to release the 4.4.2 Version of the leaked ROM,i've been using his 4.3 TW ROM and never had any issues and his themes/mod are awesome.The thread to his link is this http://forum.xda-developers.com/showthread.php?t=2593200 ,bookmark it and i think by next weekend or so he'll have 4.4.2 v1 up !Good luck:good:
Click to expand...
Click to collapse
Sure i will thank you so much
guys i finally did it., didn't lose hope and tried for the last time with all procedures and it finally worked, i'm on DN3 4.4.2 Beta 2 :victory: thank you everyone
GaneshMJ said:
guys i finally did it., didn't lose hope and tried for the last time with all procedures and it finally worked, i'm on DN3 4.4.2 Beta 2 :victory: thank you everyone
Click to expand...
Click to collapse
awesome!
singhpratik87 said:
awesome!
Click to expand...
Click to collapse
thank you :highfive:
thank you i was able to flash it
Mohammed779 said:
http://forum.xda-developers.com/showthread.php?t=2672758
I tried coming from both 4.3 Samsung based ROMs and 4.4.2 CM based.
Click to expand...
Click to collapse
i got success after two turns : )
thaanks guyz !
@abrar540 have fun enjoy the rom
Sent from my GT-N7100 using Tapatalk
Hello guys i need help installing old version over KitKat OMNI rom. Do i have to flash stock recovery? and were can i find latest version?
diddip6 said:
Hello guys i need help installing old version over KitKat OMNI rom. Do i have to flash stock recovery? and were can i find latest version?
Click to expand...
Click to collapse
Yes you must flash first stock recovery. You will find it in TWRP thread.
alex.79 said:
Yes you must flash first stock recovery. You will find it in TWRP thread.
Click to expand...
Click to collapse
I can't seem to find it :/ Does someone have link to stock recovery and some firmware i can install PAC-man ROM on? With OMNI KitKat my battery drains really really fast, bums me out because i really love the OMNI rom.
diddip6 said:
I can't seem to find it :/ Does someone have link to stock recovery and some firmware i can install PAC-man ROM on? With OMNI KitKat my battery drains really really fast, bums me out because i really love the OMNI rom.
Click to expand...
Click to collapse
Stock Recovery
Let the battery settle... I get 70% drain in 15-16 hours.
Sent from my P6-U06 using Tapatalk
didn't think of that i installed pacman rom and liked it at first then it started to annoy me so i got the HYD53ROM.. lets see how that works out
Hello,
I have a Galaxy S4 Mini LTE version and installed Carbon ROM Kitkat 4.4.4 from F4k (this one: http://forum.xda-developers.com/showthread.php?t=2642488).
Now I installed Tasker from the Playshop. I want to do a call forward with Tasker (triggered ny NFC).
when the task is started (manually of by the NFC app), Tasker claims that call forwarding was correctly done. However, call forwarding is not set up as it should, it seems that nothing actually happened with the telephone itself.
What could that be? possibly KK 4.4.4 is too restriced now?
Maby somebody has an idea, I searched and did not find a solution yet.
Cheers, Frank
You should ask to carbon developer they may have an answer for you... Btw remember carbon rom is a custom rom and they could have some bug.. You should try an stock kk 4.4.2 for your model..
ismael0301 said:
You should ask to carbon developer they may have an answer for you... Btw remember carbon rom is a custom rom and they could have some bug.. You should try an stock kk 4.4.2 for your model..
Click to expand...
Click to collapse
Hi, thanks for your quick reply. I'll try it with stock ROM now.
Franktdf said:
Hi, thanks for your quick reply. I'll try it with stock ROM now.
Click to expand...
Click to collapse
Yeah try it! The stock rom works very good and you may have better result with it!
ismael0301 said:
Yeah try it! The stock rom works very good and you may have better result with it!
Click to expand...
Click to collapse
Do you have a S4 mini and did you root the stock ROM?
Franktdf said:
Do you have a S4 mini and did you root the stock ROM?
Click to expand...
Click to collapse
Yeah im on stock rom 4.4.2 and rooted use this one to root, this is for GT-I9195 abd works perfect on the new 4.4.2
http://forum.xda-developers.com/showthread.php?t=2364980
ismael0301 said:
Yeah im on stock rom 4.4.2 and rooted use this one to root, this is for GT-I9195 abd works perfect on the new 4.4.2
http://forum.xda-developers.com/showthread.php?t=2364980
Click to expand...
Click to collapse
It worked als owith this kernel "GT-I9195_Kernel_v1.zip"?
This is the one for the original firmware rooting, that is why I am asking.
Franktdf said:
It worked als owith this kernel "GT-I9195_Kernel_v1.zip"?
This is the one for the original firmware rooting, that is why I am asking.
Click to expand...
Click to collapse
No i didnt test that one cuz i think is are not based on same rom but if you wqnt to try.. Haha let know if it work or not [emoji2]
ismael0301 said:
No i didnt test that one cuz i think is are not based on same rom but if you wqnt to try.. Haha let know if it work or not [emoji2]
Click to expand...
Click to collapse
okeydokoey, so you just use the kernel which comes with the stock ROM? Or do you use another kernel?
I thought, that root is not really possible with the kernel of the stock ROM.
Franktdf said:
okeydokoey, so you just use the kernel which comes with the stock ROM? Or do you use another kernel?
I thought, that root is not really possible with the kernel of the stock ROM.
Click to expand...
Click to collapse
Yeah mate i did not use the kernel that comes with the root files i just flash the cwm and the rootkit and voila i got my phone rooted, try it and install some app like link2sd to delete some app or frezze some app and you will see that work with the stock kernel! Until now i still dnt have any problem with stock kernel.
ismael0301 said:
Yeah mate i did not use the kernel that comes with the root files i just flash the cwm and the rootkit and voila i got my phone rooted, try it and install some app like link2sd to delete some app or frezze some app and you will see that work with the stock kernel! Until now i still dnt have any problem with stock kernel.
Click to expand...
Click to collapse
Thanks for your feedback. I was waiting for a new kernel for KK4.4.2 of Stock ROM.
I will first try Stock ROM 4.2.2 to see, whether my original problem is solved by that. If so, than I may try version 4.4.2, need to check how I can install that on my phone. . .
Franktdf said:
Thanks for your feedback. I was waiting for a new kernel for KK4.4.2 of Stock ROM.
I will first try Stock ROM 4.2.2 to see, whether my original problem is solved by that. If so, than I may try version 4.4.2, need to check how I can install that on my phone. . .
Click to expand...
Click to collapse
Well i advice you something 4.4.2 its better than 4.2.2, 4.4.2 got battery improv. I can asure you that. Well then you need help to install it? I can give you the place to download the rom... Sammobile.com then firmware and introduce your model this case (GT-I9195) and it will appear the stock available for your phone!