Develop Bugs

Unable to restart HTC One V

Hi guys,
This morning I woke up with my phone absolutly fine. But suddenly post lunch it just switched off!! Now I cant restart it. The god dam battery is embedded as well. Does anyone know how to just switch it on someway??
Regards,
San

sanbza said:
Hi guys,
This morning I woke up with my phone absolutly fine. But suddenly post lunch it just switched off!! Now I cant restart it. The god dam battery is embedded as well. Does anyone know how to just switch it on someway??
Regards,
San
Click to expand...
Click to collapse
have you plugged the charger in? better still plug it into your pc and tell us what it says when windows has found a new driver.....you could have ended up with the dreaded brick :/ which happens for no reason

Lloir said:
have you plugged the charger in? better still plug it into your pc and tell us what it says when windows has found a new driver.....you could have ended up with the dreaded brick :/ which happens for no reason
Click to expand...
Click to collapse
Thanks a ton Lloir...tried it all.. allowed it to charge...still trying, plugged it into the laptop but windows doesnt recognize it either..1st time around it tried to install the drivers, but nothing has worked so far...looks like its going to need a replacement!!

sanbza said:
Thanks a ton Lloir...tried it all.. allowed it to charge...still trying, plugged it into the laptop but windows doesnt recognize it either..1st time around it tried to install the drivers, but nothing has worked so far...looks like its going to need a replacement!!
Click to expand...
Click to collapse
ok, tell me what windows says please? the name of the driver it's trying to install...this will tell me if you need to send the device for repair....also when plugged into charger do you have LED light??
---------- Post added at 09:39 PM ---------- Previous post was at 09:37 PM ----------
if it's QHSUSB_DLOAD
then it's Dead Jim! and needs replacing

Have you tried holding power button for 10 seconds. I believe that way you can soft reset the phone. Check google, for the key combination for a hard reset as well. I believe it was volume up and the power button but I am not sure.
If these dont work, than you may need to go to service center.
Sent from my HTC One V using xda app-developers app

thearif said:
I believe it was volume up and the power button but I am not sure
Click to expand...
Click to collapse
DO NOT TRY THIS! Power button + Volume UP LEADS TO HARD BRICK
I cannot confirm as it has not happened to me but others have experienced and there is a thread dedicated to it.

hackworks said:
DO NOT TRY THIS! Power button + Volume UP LEADS TO HARD BRICK
I cannot confirm as it has not happened to me but others have experienced and there is a thread dedicated to it.
Click to expand...
Click to collapse
I can confirm this. I bricked my phone this way (power button+ volume up) when I tried to get into bootloader mode.
Source: my own experience
If you get QHSUSB_DLOAD when you connect your phone with your pc, I believe its a deadly brick.
‎"When they put 'Unknown' at the end of a quote, that means they probably don't know how to spell Anonymous" ~Unknown

Thread moved to Q&A.
••••••••••••••••••••••••••••••••••••••
" if you choose not to decide, you still have made a choice"~Rush
Sent from my Galaxy Note (i717), using XDA Premium.

Is this really bricked now?

Hi all,
Installed snd Bootloader as described (don't have link at hand sorry)...all seemed well. Got a screen with Fastboot Logo and used pr to reboot, again as prescribed. Kindle turned off and its two days now and it STILL refuses to boot up AT ALL.
Tried the various methods of holding on button for 30 secs etc etc...all to no avail. Not recognised by PC (unsurprisingly).....so,
...am I now the proud owner of a rather expensive paperweight?
No warranty I hasten to add!

So you didn't tell us too much. Does it do anything at all. If it displays anything then you probably can fix it.
Sent from my KFJWA using xda app-developers app
---------- Post added at 09:36 PM ---------- Previous post was at 09:32 PM ----------
http://forum.xda-developers.com/showthread.php?t=2011126
Check out this thread. It has helped me recover.
Sent from my KFJWA using xda app-developers app

...nothing much to add. Its like a piece of wood. Displays nothing. No change when plugged in, PC doesn't see it either of course. Can't use any of the Android First Aide apps either, as its no turning on at all...

myotai said:
...nothing much to add. Its like a piece of wood. Displays nothing. No change when plugged in, PC doesn't see it either of course. Can't use any of the Android First Aide apps either, as its no turning on at all...
Click to expand...
Click to collapse
Unfortunately, My Kindle have the same problem as yours. My device now refuses to repones at all to whatever measures I take. Searching for useful help......

[Q] tmobile galaxy note 2 and at&t galaxy note

Hi,
I have searched the internet, youtube and this forum and can't find what I need.
A family friend died this past week. Some of you may have read about the 39 year old Trinity, FL man who drowned off Key West boating with his 10 year old daughter and other friends.
He ran his own lawn care business and used a Galaxy note on AT&T and a Galaxy note 2 on Tmobile. Both phones are needed to retrieve his business information so his family can restructure the company and move on with their lives. He also stored many many pictures very valuable to his Daughter and family.
The problem is they are both password protected. I have been searching for a downloadable no lock.zip file to run from recovery. I tried no lock.apk but it doesn't work. These are both password protected so I can't go in and enable usb debugging. No indication that they have ever been modded. Binary counter is at 0 with official Samsung rom.
Can anyone help?
Thanks

Hey buddy the only way is to factory reset using stock recovery if you are not rooted. You will still be able to keep everything that's on his SD. And contacts from sim. Only option if your not rooted.....with the phone off. Hold volume up, power button, and homekey at the same time. Hold it until you see the stock recovery. Now you will navigate with volume rockers to factory reset...

hard reset
G7Baker said:
Hey buddy the only way is to factory reset using stock recovery if you are not rooted. You will still be able to keep everything that's on his SD. And contacts from sim. Only option if your not rooted.....with the phone off. Hold volume up, power button, and homekey at the same time. Hold it until you see the stock recovery. Now you will navigate with volume rockers to factory reset...
Click to expand...
Click to collapse
Hi and thanks,
We considered hard reset but they don't want to lose any data if possible. Can this be done by T Mobile? Do they have any method?

No they won't. They will also factory reset. Sorry bro. Is his password a pattern or pin?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Take a look at this http://www.youtube.com/watch?v=6i-0t63wOII

security flaw!!!
G7Baker said:
No they won't. They will also factory reset. Sorry bro. Is his password a pattern or pin?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Take a look at this http://www.youtube.com/watch?v=6i-0t63wOII
Click to expand...
Click to collapse
YES, I tried that !!!!! My eyes are PERMANENTLY CROSSED NOW. WOW, I see that they CAN DO IT. Way beyond my capabilities!!!!
Think I am going to sit my Son down(19) and the step Son(18) of the unfortunate man and tell them it's a video game!!!!
THANKS!!!!!
If ANYONE develops a "NO LOCK.ZIP" please let me know!!!
Thank You!!!

Yea no problem. Thats what we are here for. To learn and teach....
Dont for get to hit Thanks when someone trys to help you​

flaw
G7Baker said:
No they won't. They will also factory reset. Sorry bro. Is his password a pattern or pin?
---------- Post added at 06:58 AM ---------- Previous post was at 06:56 AM ----------
Take a look at this http://www.youtube.com/watch?v=6i-0t63wOII
Click to expand...
Click to collapse
believe it or not I WAS successful downloading AND installing no lock. Unfortunately, This phone must be running a different OS version. I KNOW I opened the program several times but it doesn't take over and unlock the screen lock like the video shows.

success!!
scm37 said:
believe it or not I WAS successful downloading AND installing no lock. Unfortunately, This phone must be running a different OS version. I KNOW I opened the program several times but it doesn't take over and unlock the screen lock like the video shows.
Click to expand...
Click to collapse
OK, I WAS able to use that security hole."No Lock" didn't work by itself but in conjunction with "No Lock Screen" I was able to access No Lock AFTER using No Lock Screen!!!
Thanks goes out to Mr. Eden!!!!!

Locked Out

Hey guys, I'm new to XDA so please forgive the noob post, I'm just trying to get my phone working again. I broke the screen and now the bottom half of my phone is unresponsive (capacitive keys don't work). I'm rooted with TWRP installed, stock 4.1.2. Everything was fine until my friend thought it would be funny to put a lockscreen on my phone. I am unable to rotate my lockscreen to 270 degrees (how i've been managing to use my device with the help of gravity box on screen navigation keys) and am now permanently locked out of my decice. I can't input the correct pin that he told me (6735) or even incorrectly five times to reset via google account because the "ok" button is located on the part of the screen that I can't click. I thought that hopefully I had left USB debugging on so that I could send an ADB command to unlock my phone but it won't even recognize my device when it's plugged in, meaning I must have unchecked USB debugging. On top of that, my phone is in charge only mode, with the option to switch to USB mass storage stuck behind the lock screen. So my problem is that I want to go into twrp recovery, created a nandroid backup then factory reset my device. But of course, TWRP doesn't rotate either. I can click most of the buttons, including Backup, wipe, etc, but can't actually execute any action because the "swipe to ..." is located on the bottom of the screen - where I can't click. I was wondering if anyone could somehow flip the TWRP program upside down so that I could use it.
I just realized that I don't know how I would get the new version of recovery on my device anyway, because I can't even connect my phone to the computer for it to recognize as mass storage... any suggestions, help, advice, anything! would be very very appreciated. Thanks.
PS - This is MY phone, not stolen, not picked up anywhere, I know my google account info, I know the phone number, I know most everything about it so if you need some sort of verification that it's mine, let me know. I would just like to be able to use my phone again. Thanks

Your friend is a jerk. I'd punch him in the face.
Can you access the side load option in twrp?

oohaylima said:
Your friend is a jerk. I'd punch him in the face.
Can you access the side load option in twrp?
Click to expand...
Click to collapse
I can get to the "swipe to start sideload" screen but can't swipe because it's below the crack... :/
Could I just get a new digitizer, would that fix it?

Would be easier to get digitizer+LCD already put together. I screwed up a new screen on my evo because the LCD didn't get heated up enough to separate the glue. I do have the official service manual for the phone so if u want I can send u what it says to do to separate the LCD and digitizer if u don't want to pay the extra
Sent from my iPad using Tapatalk HD
---------- Post added at 07:03 PM ---------- Previous post was at 07:03 PM ----------
But yes a new digitizer would fix it
Sent from my iPad using Tapatalk HD

AFschizoid said:
Would be easier to get digitizer+LCD already put together. I screwed up a new screen on my evo because the LCD didn't get heated up enough to separate the glue. I do have the official service manual for the phone so if u want I can send u what it says to do to separate the LCD and digitizer if u don't want to pay the extra
Sent from my iPad using Tapatalk HD
---------- Post added at 07:03 PM ---------- Previous post was at 07:03 PM ----------
But yes a new digitizer would fix it
Sent from my iPad using Tapatalk HD
Click to expand...
Click to collapse
Any idea where I'd find it already put together?

I'll do some quick hunting, see if I can't find it
Sent from my LG-LS970 using Tapatalk
---------- Post added at 12:28 AM ---------- Previous post was at 12:17 AM ----------
http://www.ebay.com/itm/LCD-Display...34037?var=590205692373&_trksid=p2054897.l5658
Or can select different parts on that listing, for example. Just search google for touch digitizer LCD assembly ls970, that's what I did. There are other cheaper ones but that one is just plug it in, screw it back together and go, so...
Sent from my iPad using Tapatalk HD

Hmm.....try fastboot, then load clockwork non-touch version through adb and see if that works.

oohaylima said:
Hmm.....try fastboot, then load clockwork non-touch version through adb and see if that works.
Click to expand...
Click to collapse
I can't load anything through ADB because my phone won't connect to the computer - USB debugging is turned off. If I could use ADB I would just use an unlock command to remove the pin.
Thanks though.

UnluckyTech said:
I can't load anything through ADB because my phone won't connect to the computer - USB debugging is turned off. If I could use ADB I would just use an unlock command to remove the pin.
Thanks though.
Click to expand...
Click to collapse
That doesn't matter in fastboot. As long as you have the drivers for the o/s to read the device adb will pick it up. In windows 8 you have to install modified drivers for it to read it.

Help Needed!

Today I was in my car sitting in a parking lot, had my phone propped on my steering wheel with the txt app open when the screen when blue then shut down. I tried to power it on but it wouldn't come on, I pulled the battery hit the power button, the LG logo came up for a few seconds then shut off and the only way to turn it on again would be to pull the battery. Holding the power and volume rocker button down will turn it on to recovery. The phone is rooted so when I go to factory reset i've had 2 times it loaded to TWERP recovery but then the blue screen would come up again and I can't do anything. Most of the time it will end up in a green screen with the TC Crash, Demigod crash screen. Plugging it into my computer does load it as a device but I'm not able to access the phones storage. Has anyone ran into this issue and first question, is there anyway to recover data? Second question, is this a hardware related issue? I'm about to try and flash it back to stock since I can't get into TWERP but i'll wait for a response before I do that.

I tried to boot to download mode, I hold the volume up rocker and then plug in a USB, it shows download mode icon for a quick second but the screen goes black. I tried the LG flash tool but it doesn't get past step 1. Any one have any ideas i'm fresh out. Only new thing to report is sometimes instead of the green TZ crash i'm getting an orange RMP crash screen but with the same options as the green screen.

Need to know know a little more before I can reach my decision on where to start.
ROM
Kernel
Thermal mods
Was the phone hot?
Does it get hot upon starting?
Baseband?
I had this happen before but never to the extent that your explaining. Kind of sounds like a kernel panic.

DroidsOnRoids said:
Need to know know a little more before I can reach my decision on where to start.
ROM
Kernel
Thermal mods
Was the phone hot?
Does it get hot upon starting?
Baseband?
I had this happen before but never to the extent that your explaining. Kind of sounds like a kernel panic.
Click to expand...
Click to collapse
I can tell you what ROM it was and thats about it. Resurrection-Remix-LP-v5.5.8-20151027-vs985
Was running sold for months. Phone wasn't hot and didn't notice it getting hot at start up. Phone had 99% battery last time I checked before the blue screen.
I did some research about the LG G3 and blue screen and its a common issue from what i've found. No fix really

http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 u could try this

TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 u could try this
Click to expand...
Click to collapse
WOW, not sure about that. I'll see. Going to call verizon and see if they can do anything first.

Youll have to pay cause ure waranty is voided being rooted its a sure fire fix for almost all hard bricks and everything its not as bad as it looks i have had to myself on my g2 and g3
---------- Post added at 06:07 PM ---------- Previous post was at 06:02 PM ----------
Do u get the screen press up for dl mode. Try a bat pull and boot into recovery if possible

TheMadScientist420 said:
Youll have to pay cause ure waranty is voided being rooted its a sure fire fix for almost all hard bricks and everything its not as bad as it looks i have had to myself on my g2 and g3
Click to expand...
Click to collapse
Are you sure its a hard brick? From all the things i've read about this blue screen is its a hardware issue. My phone is showing up in the device manager under ports. Can I skip the first part?

Itsna kernal panick some people claim its from over heat others other issues if ure phonenshows up as qusb bulk or something like that then i believe u can the pin groung is to reset it to get it into bulk mode so from there u reflash all the primary gtp partitions then u can get to download mode to restore using stock tot. Ive nevernhad this issue happen but no its not technicly a hard brick but so far i cant find a solution but the method ive shown u usaully brings back all bricks and issues it could be a hardware issue but 9 outa 10 times its a software or firmware issue
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
If u got usbbulk mode on com ports not step 4 but num 4 further down the page is where u start but u have to dl wilcracker and ure stock tot file

TheMadScientist420 said:
Itsna kernal panick some people claim its from over heat others other issues if ure phonenshows up as qusb bulk or something like that then i believe u can the pin groung is to reset it to get it into bulk mode so from there u reflash all the primary gtp partitions then u can get to download mode to restore using stock tot. Ive nevernhad this issue happen but no its not technicly a hard brick but so far i cant find a solution but the method ive shown u usaully brings back all bricks and issues it could be a hardware issue but 9 outa 10 times its a software or firmware issue
---------- Post added at 06:20 PM ---------- Previous post was at 06:15 PM ----------
If u got usbbulk mode on com ports not step 4 but num 4 further down the page is where u start but u have to dl wilcracker and ure stock tot file
Click to expand...
Click to collapse
OK thanks. I mean I guess I don't have anything to loose, so i'll give it a shot.

Like i said i couldnt find a solution im no developer ive just been rooting and modding since the first og moto droid ive bricked and fixed a lot of phones this may not be the proper solution i just no its work for a lot of people on a lot of diffrent bricks on both g2 and g3 i know basicly the g2 is unbri kable and sofar so has the g3 since this i wish it was a general sticky
---------- Post added at 07:07 PM ---------- Previous post was at 07:00 PM ----------
You can try calling lg but i consider there tecks dumber the crap but they get paid for what they do again 9 outa 10 times they cant help other than u sending it in for repair like i said ure rooted if they find out it is its fixed on ure dime i dont know no cell company has ever helped me out.

What do kind of wire do you suggest using?

I used acouple strands of speaker wire coiled up and a pair of tweezers to hold it end bent it to touch both so i still had a free hand

TheMadScientist420 said:
I used acouple strands of speaker wire coiled up and a pair of tweezers to hold it end bent it to touch both so i still had a free hand
Click to expand...
Click to collapse
This is impossible!

joel71 said:
This is impossible!
Click to expand...
Click to collapse
When u plug into ure pc what ports or coms. What xoez the fone shop up az

TheMadScientist420 said:
When u plug into ure pc what ports or coms. What xoez the fone shop up az
Click to expand...
Click to collapse
After trying for what felt like forever I got it kind of work once. It showed up as QCBATCH on port 6. But once I broke connection it went away and I wasn't able to get it to work again. I'll give it another try sometime today..

Sometimes it takes a bunch of trys

TheMadScientist420 said:
Sometimes it takes a bunch of trys
Click to expand...
Click to collapse
Got it working on the first try today. I used the SIM Card bay for a ground so I didn't have to hold it. Much easier, flashing now, will report back after.

joel71 said:
Got it working on the first try today. I used the SIM Card bay for a ground so I didn't have to hold it. Much easier, flashing now, will report back after.
Click to expand...
Click to collapse
Let me no how it goes

I did the steps but it still booted to a RPM CRASH screen, I couldn't get into download mode. I'm trying to flash Cache, System, Userdata, and SB1 now.