Related
Ok, I guess i have bricked my phone beyond repair but i have got to ask. Yesterday i tried different roms and in the end i tried to go back to official Htc rom and tried to change back the Hboot to the original. Rebooted and now its dead. When i press volume up and power it vibrates a few times and then blinks orange. When i press volume up and volume down and power it vibrates a few time and then the light is green.
On both occasion my computer finds the phone but request the qualcomm driver which i cannot find. Anyone that has any idea what to do? I cannot get in to recovery.
I know its my fault but it doesnt hurt to ask.
Thanks
Björn
Try holding volume down and power to see if you can get into bootloader.
slim00 said:
Try holding volume down and power to see if you can get into bootloader.
Click to expand...
Click to collapse
Tried that, nothing happens. Thank you for replying.
Björn
http://forum.xda-developers.com/showthread.php?t=842495
hope this helps
smokeuout said:
http://forum.xda-developers.com/showthread.php?t=842495
hope this helps
Click to expand...
Click to collapse
Ty for replying, the problem is that ADB cannot find my phone. Only my comp can but asking for qualcomm drivers which i dont have.
Björn
waspforlife said:
Ty for replying, the problem is that ADB cannot find my phone. Only my comp can but asking for qualcomm drivers which i dont have.
Björn
Click to expand...
Click to collapse
If you don't have the drivers..google and download them for crying out loud. C'mon man u gotta try at least
Sent from my HTC Vision using XDA Premium App
Spastic909 said:
If you don't have the drivers..google and download them for crying out loud. C'mon man u gotta try at least
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
That is exactly what I have been doing the last couple of days, i have downloaded numerous of drivers without any luck. Been to forums and sites. I realize now that my device is not semi-bricked which would of course be better if it was. The only thing that i cannot understand is why my phone reacts when i press the buttons i wrote in my first post in this thread. Also why my comp finds my phone. Gives a little hope as it seems it is not completely dead.
Björn
waspforlife said:
Ok, I guess i have bricked my phone beyond repair but i have got to ask. Yesterday i tried different roms and in the end i tried to go back to official Htc rom and tried to change back the Hboot to the original. Rebooted and now its dead. When i press volume up and power it vibrates a few times and then blinks orange. When i press volume up and volume down and power it vibrates a few time and then the light is green.
On both occasion my computer finds the phone but request the qualcomm driver which i cannot find. Anyone that has any idea what to do? I cannot get in to recovery.
I know its my fault but it doesnt hurt to ask.
Thanks
Björn
Click to expand...
Click to collapse
If the phone shows up as either
Qualcomm CDMA Technologies MSM
or
QHSUSB_DLOAD
You have an unrecoverable brick.
Ok, ty all for trying to help. Bought the new Xperia Mini Pro instead.
Take Care
Björn
I recently Rooted my sealed samsung galaxy s3 without having a clue what i'm doing i downloaded this program called snapdragon to root it along with ODIN. The phone rooted fine everything was working okay, I even downloaded an app to see if the root was successful and indeed it was. I shut the phone down wake up in the morning to turn it back on and I get zero response. Any help/direction would be greatly appreciated.
Thanks!
Might seem obvious, but have you tried leaving it plugged in for ten-fifteen minutes?
joshnichols189 said:
Might seem obvious, but have you tried leaving it plugged in for ten-fifteen minutes?
Click to expand...
Click to collapse
Yes of course I've tried leaving it plugged in for several hours and the night before the phone was at 100% charge so I doubt battery is the issue.
Tks though
Did you try booting into recovery?
Sent from my SGH-T999 using xda app-developers app
Ummm seems like u can fix it.... go bak to stock using odin as well and go back to stock and i believe cwm is going to be gone so as your root access so re-do it but this time guide yourself through a turorial(a.k.a google) and since you have to clue i think the best choice for you is to find a video tutorial in case your doubting or getting confused with the steps or sometimes to see what you did wrong that caused the phone to misbehave...
Sent from my SGH-T999 using xda app-developers app
*sigh*
This is why I hate one-click-root kits, you get people doing things to their phones they don't understand, wreck it and come here saying "help, I don't know what do do!" Something like this you really should at least understand the basics. I hope this gets you more involved in researching what's actually happening. It's important to know what's happening to your device as well as why, that way if something goes badly you'll have an idea of how to get out of it.
Sorry, enough lecturing, let's see if we can get something going here. Give a bit more detail about what happens. You're phone is shut down, right? You hit the power button and no response, like the battery is actually out of the phone, or does it turn on and give you a blank screen? If it was a brick, I'd think you'd at least see the boot screen before everything goes wrong.
Ok, I'm going to go ahead and assume you've removed the battery. If you haven't, do so now.
If it still won't turn on, try actually holding the power button down for 30-60 seconds. I had a scary moment with my phone yesterday, rebooted it running Wicked v5 on Trinity and the screen just died. I've been running that rom for a week with just a couple of issues here and there, nothing out of the ordinary. Pulled the battery and tried again, nothing. After holding the power button down for a bit I felt a quick vibrate, then the boot logo came up. No idea why, I'm going to have to look into it.
Beyond that, I'm brand new to this phone and Sammy's Android devices so I'm still learning myself. HTC phones I could help out more with, but I'm still a bit clueless with this thing.
kitsunisan said:
*sigh*
This is why I hate one-click-root kits, you get people doing things to their phones they don't understand, wreck it and come here saying "help, I don't know what do do!" Something like this you really should at least understand the basics. I hope this gets you more involved in researching what's actually happening. It's important to know what's happening to your device as well as why, that way if something goes badly you'll have an idea of how to get out of it.
Sorry, enough lecturing, let's see if we can get something going here. Give a bit more detail about what happens. You're phone is shut down, right? You hit the power button and no response, like the battery is actually out of the phone, or does it turn on and give you a blank screen? If it was a brick, I'd think you'd at least see the boot screen before everything goes wrong.
Ok, I'm going to go ahead and assume you've removed the battery. If you haven't, do so now.
If it still won't turn on, try actually holding the power button down for 30-60 seconds. I had a scary moment with my phone yesterday, rebooted it running Wicked v5 on Trinity and the screen just died. I've been running that rom for a week with just a couple of issues here and there, nothing out of the ordinary. Pulled the battery and tried again, nothing. After holding the power button down for a bit I felt a quick vibrate, then the boot logo came up. No idea why, I'm going to have to look into it.
Beyond that, I'm brand new to this phone and Sammy's Android devices so I'm still learning myself. HTC phones I could help out more with, but I'm still a bit clueless with this thing.
Click to expand...
Click to collapse
Yes I have taken out the battery replaced it several times. I hit the volume home and power button several times. When I do that I get a zero response nothing shows up I hear no sound its as if the phone is just completely dead. One thing I did realise is when I plug it into the computer and press the power button what would happen is it would connect and automatically disconnect
Can you get into Download mode? Volume down + Home + Power button?
Sent from my SGH-T999
Don't forget to let go of the power button when going into recovery.
Have you done what the other post said?
Hold power for about 10-30 seconds. Does it do anything? Do you feel a verrrry slight vibration?
When you plug it in without doing anything else does the computer see it in device manager? How about if you press power once? Or holding power down?
Does it register that its charging?
This may sound dumb but did you try powering up without the phone plugged into anything?
Sent from my SGH-T999 using xda app-developers app
DocHoliday77 said:
Have you done what the other post said?
Hold power for about 10-30 seconds. Does it do anything? Do you feel a verrrry slight vibration?
When you plug it in without doing anything else does the computer see it in device manager? How about if you press power once? Or holding power down?
Does it register that its charging?
This may sound dumb but did you try powering up without the phone plugged into anything?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Come on guys I respect the fact that everyone here is out here to help but read my post I have done every way common sense possible I actually need some real advice maybe how to reset factory setting with a device or maybe download a program.
Any help would be useful.
cyklosporine said:
I recently Rooted my sealed samsung galaxy s3 without having a clue what i'm doing i downloaded this program called snapdragon to root it along with ODIN. The phone rooted fine everything was working okay, I even downloaded an app to see if the root was successful and indeed it was. I shut the phone down wake up in the morning to turn it back on and I get zero response. Any help/direction would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
cyklosporine said:
Come on guys I respect the fact that everyone here is out here to help but read my post I have done every way common sense possible I actually need some real advice maybe how to reset factory setting with a device or maybe download a program.
Any help would be useful.
Click to expand...
Click to collapse
Ummm. Sorry but maybe im missing something? Your first sentence in your op says you didnt have a clue what you were doing....
And where is it supposed to infer that you've done everything already?
Imo you have been getting 'real' advice but from what I see you haven't 'really' answered anyones suggestions.
No one can help you if you dont tell us what exactly you have tried and what what happened when you did.
For example in your only response you mentioned hitting the volume and home keys a bunch of times....what exactly do you mean by this? Did you hold them while trying to power up? Volume up or down? Did you release any of them during that process, and if so which and when?
Its kinda hard to help someone who doesn't have a clue what they are doing and only responds that hes done everything common sense dictates.
I seriously mean no offence but to me common sense would dictate that you not try rooting or anything if you know you dont know what you're doing.
It would also dictate that if you want further help with this you should go back and respond to what everyone suggested.
Like I said, im not trying to offend, just help.
Sent from my SGH-T999 using xda app-developers app
I am having the same issue
I just tried flashing Android Revolution to my phone. I went through the whole set up process. Went to reboot then it went blank. Nothing. I get nothing when I plug it in. The computer doesn't recognize any device attached to it. I've tried all the ideas listed here and I get nothing. It's as if the phone is completely dead. When I flashed the rom my battery was at 90%. I've used various roms on different phones and this was the first time I did it to my Galaxy s3 and this is the first time it's ever happened. Talk about frustrating.
Jtag
Sent from my SGH-T999 using xda premium
lokitsar said:
I just tried flashing Android Revolution to my phone. I went through the whole set up process. Went to reboot then it went blank. Nothing. I get nothing when I plug it in. The computer doesn't recognize any device attached to it. I've tried all the ideas listed here and I get nothing. It's as if the phone is completely dead. When I flashed the rom my battery was at 90%. I've used various roms on different phones and this was the first time I did it to my Galaxy s3 and this is the first time it's ever happened. Talk about frustrating.
Click to expand...
Click to collapse
If you can get to download mode by holding vol up home power. You then you can use this. http://forum.xda-developers.com/showthread.php?t=1771687
To get our phone back. I had the same problem after a bad flash. My phone wouldn't do anything. After I left it plugs in for an hour I was able to get into download mode ..hope you get urs back. If its what happened to me then u might find that you have no 4g anymore... If that's the case let me know and I'll tell u what I did to get it back.
Sent from my SGH-T999 using xda premium
cyklosporine said:
Come on guys I respect the fact that everyone here is out here to help but read my post I have done every way common sense possible I actually need some real advice maybe how to reset factory setting with a device or maybe download a program.
Any help would be useful.
Click to expand...
Click to collapse
Yeah, good luck getting ANY further help with that attitude bro!!!
Sent from my SGH-T999 using xda premium
I got same problem with my friend's phone
He rooted it by some oneclick root pc program (I rooted this way too, and no problem will come) and flashes Rom with some android apk. ... After questioning him, I found out he DO NOT unlock bootloader.. .. I never seen phone in this status before... another strange thing is that when is phone in charger, battery and phone isn't heating up.. It's cold like ice... This is strange for me..I try 5 android devices and every is heating when it charging up.. (sorry for my bad English) Thank you and maybe someone comming with answers Phone doesn't react, no display brightness show up, no vibrating, no response
I have rooted my phone samsung galaxy grand 2 via odin after that flash the rom cm 11 and reboot my phone it got stuck into boot loop. Then i have done 1 stupidity again i push twrp file in that now m not able to go in recovery mode what should l i do now.
Wrong forum, look here: http://forum.xda-developers.com/galaxy-grand-2
I don't know anything about the phone but you could try looking for the current ROM on the phone at sammobile.com and then re-flash it via Odin.
i unluged the device before dhe odin finished his job ( by mistakeee ) and now it doesnt turn on , charge , go to recovery/odin , hold down power button for 30-60-120 sec nth hapend, it has baterri 90-100 % . plss guys help me :'( i have an samsung galaxy s advance .
Hey there,
Im a newb here, and this is my first thread, but whatever.
It all started a few months ago.
Several weeks after I rooted my play, and flashed cm7, with doom kernal, my play just suddenly didn't turn on. (Like, turned it off for the night, but refused to turn on in the day again) . However, after I took out the battery and charged it for 10 mins before plugging the battery back in and turning it on again, it worked. This happened intermittently, and through the 12 months I had with this phone, this has happened multiple times, albeit rarely. Every time it happened, it wouldn't turn on, no led when plugged in the charger, no nothing. Its like a dead brick. Plugged it into the computer and it says "QHSUSB_DLOAD". It would work after I charge it without the battery tho. LOL. - weird. (Something like this, link here
However, yesterday, 31/1/2013, my luck basically ran out. The same thing happened again, with "QHSUSB_DLOAD" showing up and all, but my above method didn't work. And so, I'm stuck with a dead brick.
Basically, my xperia play is unresponsive. Plugged it into the computer and it shows "QHSUSB_DLOAD" I think it stands for Qualcomm High Speed USB Download mode. Today, following this link I just randomly plugged in my phone while holding the back button, with flashtool open in the background. Its some miracle, like, my pc suddenly detected it as an unknown device, and flashtool did some kind of thing, not sure, forgot to screen shot but i think it goes along the lines of "installftfkit". After that, my phone booted.
However, because I wanted to plug in my sim card, i rebooted it, and this time it wouldn't turn on. I tried replicating the results, and all i got wasn't "unknown device" but "QHSUSB_DLOAD".
And there you have it, Xperia Play stuck at "QHSUSB_DLOAD" permanently after several times of intermittent incidents of that happening. It may be hardware failure, which explains the intermittent incidents.
But Im still kind of curious. What causes "QHSUSB_DLOAD"? What component fails that would cause the PC to read it as "QHSUSB_DLOAD"?
Its a dead brick, but I am still trying to revive it. I installed qpst and the QHSUSB_DLOAD drivers. QPST configuration reads a phone in download mode(image 1), QPST software download seems to be able to flash a phone and boot image(image 2). But it needs a hex file and stuff. (Not sure bout that)
Is it easy to get a boot image thing for xperia play? Can i flash it using QPST and make my phone work again?
Thanks for your help guys! Really appreciate it!
Mr_Pistachios said:
Hey there,
Im a newb here, and this is my first thread, but whatever.
It all started a few months ago.
Several weeks after I rooted my play, and flashed cm7, with doom kernal, my play just suddenly didn't turn on. (Like, turned it off for the night, but refused to turn on in the day again) . However, after I took out the battery and charged it for 10 mins before plugging the battery back in and turning it on again, it worked. This happened intermittently, and through the 12 months I had with this phone, this has happened multiple times, albeit rarely. Every time it happened, it wouldn't turn on, no led when plugged in the charger, no nothing. Its like a dead brick. Plugged it into the computer and it says "QHSUSB_DLOAD". It would work after I charge it without the battery tho. LOL. - weird. (Something like this, link here
However, yesterday, 31/1/2013, my luck basically ran out. The same thing happened again, with "QHSUSB_DLOAD" showing up and all, but my above method didn't work. And so, I'm stuck with a dead brick.
Basically, my xperia play is unresponsive. Plugged it into the computer and it shows "QHSUSB_DLOAD" I think it stands for Qualcomm High Speed USB Download mode. Today, following this link I just randomly plugged in my phone while holding the back button, with flashtool open in the background. Its some miracle, like, my pc suddenly detected it as an unknown device, and flashtool did some kind of thing, not sure, forgot to screen shot but i think it goes along the lines of "installftfkit". After that, my phone booted.
However, because I wanted to plug in my sim card, i rebooted it, and this time it wouldn't turn on. I tried replicating the results, and all i got wasn't "unknown device" but "QHSUSB_DLOAD".
And there you have it, Xperia Play stuck at "QHSUSB_DLOAD" permanently after several times of intermittent incidents of that happening. It may be hardware failure, which explains the intermittent incidents.
But Im still kind of curious. What causes "QHSUSB_DLOAD"? What component fails that would cause the PC to read it as "QHSUSB_DLOAD"?
Its a dead brick, but I am still trying to revive it. I installed qpst and the QHSUSB_DLOAD drivers. QPST configuration reads a phone in download mode(image 1), QPST software download seems to be able to flash a phone and boot image(image 2). But it needs a hex file and stuff. (Not sure bout that)
Is it easy to get a boot image thing for xperia play? Can i flash it using QPST and make my phone work again?
Thanks for your help guys! Really appreciate it!
Click to expand...
Click to collapse
Correct me if Im wrong...but Im guessing you tried Flashtool and it doesn't work ?
Also , are you familiar with using fastboot?
another Xperia Play Problem
Hi I am a noob also.
I am having a similar problem. Today I was trying to install the wifi module since it wasn't installed on the gin2Jellybean rom, i tried to flash the phone using the Flashtool (turned the cellphone off and pluged it in again while holding the back button) then the window disappeared and nothing happened. So I tried again, but first I took out the battery and put it in again and tried to flash again and now nothing is happening, Doesn't turn on, Flashtool doesn't do anything and when I try plugging it the laptop does the sound of an unrecognized device. The phone doesn't vibrate or anything when I press the power button.
Just realized that I tried flashing my cell phone using the x10 BLRelock.ftf crap.. is there anyway I can fix this?
Please Help.
Thank you.
216Monster said:
Correct me if Im wrong...but Im guessing you tried Flashtool and it doesn't work ?
Also , are you familiar with using fastboot?
Click to expand...
Click to collapse
Flashtool and fastboot doesn't detect my phone. So yea .
Mr_Pistachios said:
Flashtool and fastboot doesn't detect my phone. So yea .
Click to expand...
Click to collapse
Are the fast boot drivers installed ? Is your boot loader unlocked ?
Sent from my ARCHOS 101G9 using xda premium
216Monster said:
Are the fast boot drivers installed ? Is your boot loader unlocked ?
Sent from my ARCHOS 101G9 using xda premium
Click to expand...
Click to collapse
LOL WTS.
As I said, its totally intermittent and random. I tried plugging it into the computer today, and this time a red led was flashing. I let it charge up a little, and there i had it, booted up perfectly normally.
Maybe the plug is becoming dusty or whatever, resulting in the detection being very intermittent? It happens on and off.
When the phone booted up, I noticed the battery level being very low (2%) maybe it needed some charging? Maybe the battery's screwed?
Its really weird.
And yea, fast boot drivers are installed, and boot loaders are unlocked (If not cm10 wouldn't have been installed lol)
Gonna keep you guys posted and see if it goes dead after restarting. Gonna restart after it charges up to 40%.
(I need to restart cos I have to plug in my sim and memory card)
Mr_Pistachios said:
LOL WTS.
As I said, its totally intermittent and random. I tried plugging it into the computer today, and this time a red led was flashing. I let it charge up a little, and there i had it, booted up perfectly normally.
Maybe the plug is becoming dusty or whatever, resulting in the detection being very intermittent? It happens on and off.
When the phone booted up, I noticed the battery level being very low (2%) maybe it needed some charging? Maybe the battery's screwed?
Its really weird.
And yea, fast boot drivers are installed, and boot loaders are unlocked (If not cm10 wouldn't have been installed lol)
Gonna keep you guys posted and see if it goes dead after restarting. Gonna restart after it charges up to 40%.
(I need to restart cos I have to plug in my sim and memory card)
Click to expand...
Click to collapse
Well, I restarted and it worked.
My theory is this: Phone ran out of batt one day. Plug is loose and dusty. Computer couldn't detect it properly, charger couldn't charge my phone properly (contacts are rusty or whatever shyt) and therefore phone couldn't on.
Don't know why my computer detected it as QHSUSB_DLOAD multiple times throught the 1 month tho.
Could a dirty plug cause that?
During that 1 month there was no response on the computer, thought it was bricked lol.
Anyways, I will keep you guys posted if this happens again, thanks for your help guys!
Imma keep this thread open since this is intermittent.
I'll only close it after 2 months.
Mr_Pistachios said:
Well, I restarted and it worked.
My theory is this: Phone ran out of batt one day. Plug is loose and dusty. Computer couldn't detect it properly, charger couldn't charge my phone properly (contacts are rusty or whatever shyt) and therefore phone couldn't on.
Don't know why my computer detected it as QHSUSB_DLOAD multiple times throught the 1 month tho.
Could a dirty plug cause that?
During that 1 month there was no response on the computer, thought it was bricked lol.
Anyways, I will keep you guys posted if this happens again, thanks for your help guys!
Imma keep this thread open since this is intermittent.
I'll only close it after 2 months.
Click to expand...
Click to collapse
zzz. It couldn't boot up again. This time no QHSUSB_DLOAD, no nothing on the computer. 0 detection 0_0
Mr_Pistachios said:
zzz. It couldn't boot up again. This time no QHSUSB_DLOAD, no nothing on the computer. 0 detection 0_0
Click to expand...
Click to collapse
My phone is just driving me batshyt insane -.-
I tried pressing the power button again and it worked, without plugging in the charger nor the computer.
It's intermittent, and now im afraid to turn it off 0_0
Mr_Pistachios said:
My phone is just driving me batshyt insane -.-
I tried pressing the power button again and it worked, without plugging in the charger nor the computer.
It's intermittent, and now im afraid to turn it off 0_0
Click to expand...
Click to collapse
FML. Hands were itchy and wanted to see what would happen if I turned my phone off.
Now it can't turn back on, with the computer only detecting QHSUSB_DLOAD.
Mr_Pistachios said:
FML. Hands were itchy and wanted to see what would happen if I turned my phone off.
Now it can't turn back on, with the computer only detecting QHSUSB_DLOAD.
Click to expand...
Click to collapse
Turned on my phone after 10+ tries.
What I did:
1) Plugged out battery, held power button
2)Without releasing the power button, insert the battery.
Repeat until phone turns on.
Moral of story: Persistence pays off. Nah jk.
Made sure to on my phone with the sim card in this time
Never gonna off my phone ever again (Hope it doesn't run out of batt LOL)
One thing to note is this really weird fluctuation in my phone's battery levels. Maybe my battery is going nuts? Attached is the screenshot.
Made sure to on my phone with the sim card in this time
The epic fluctuation may provide clues as to why my phone's behaving like so.
As you can see from the third dip, I was charging my phone. And then after switching it off, it wouldn't turn on. After a day, and countless times of trying to wake it up, you can see that the battery level has dropped sharply. Weird.
The first dip happened a few days ago(not able to turn on) on 1st Feb. The second dip happened on the 4th, while the third happened on the 5th, today These drops in battery levels happened when my phone couldn't turn on.
Qhsusb_dload
I am sorry to say that my problem is still the same every time I plug my phone it is shown as QHSUSB_DLOAD.
I just need to find a driver for it.
PS my phone never turned on after the brick.
Can someone send me a link to the driver and instructions if hard to install.
Thank you.
extrem3hunt said:
I am sorry to say that my problem is still the same every time I plug my phone it is shown as QHSUSB_DLOAD.
I just need to find a driver for it.
PS my phone never turned on after the brick.
Can someone send me a link to the driver and instructions if hard to install.
Thank you.
Click to expand...
Click to collapse
Does plugging the phone into the computer while holding the back button work?
Mr_Pistachios said:
Does plugging the phone into the computer while holding the back button work?
Click to expand...
Click to collapse
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
extrem3hunt said:
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
Click to expand...
Click to collapse
Even if it finds the driver, it wouldn't help you, cos QHSUSB_DLOAD means that the phone can't find the rom, and kernel or whatever. (I think) Its like a computer without an operating system. QHSUSB_DLOAD = Qualcomm Highspeed USB Download Mode, which means its waiting for the manufacturer to flash the rom and shyt, and therefore, your phone is bricked. (Dead brick, i think?)
For me, i think there's something wrong with the connections in my motherboard, resulting in the phone not being able to find the rom and stuff.
Maybe there's no hope for you.........
In short, I think your phone's bricked forever.... Most probably.
any fix bricked play
Hi,
I am in the same boat. I get the QSHUSB Dload error and I cant get the phone into flash mode. Its basically dead, as the others have mentioned. Anyone get a fix for this thanks
Tommy
---------- Post added at 04:15 PM ---------- Previous post was at 04:06 PM ----------
extrem3hunt said:
Nope every time I connect it is detected as QHSUSB_DLOAD and it tries to find a driver and fails.
Click to expand...
Click to collapse
Hi, could you fix it in the end, I have the same problem...looks like I may need a new play after only 1 week lol : (
QSHUSB_Dload Fix
tommyforest123 said:
Hi,
I am in the same boat. I get the QSHUSB Dload error and I cant get the phone into flash mode. Its basically dead, as the others have mentioned. Anyone get a fix for this thanks
Tommy
---------- Post added at 04:15 PM ---------- Previous post was at 04:06 PM ----------
Hi, could you fix it in the end, I have the same problem...looks like I may need a new play after only 1 week lol : (
Click to expand...
Click to collapse
Hi, I have fixed my HARD bricked phone with the help of Alejandrissimo, contact him and tell him about your problem and he fix your phone online.You will need to know some basic knowledge of electronics and you will require a piece of wire. This is where you contact him.
unlock-bootloader(dot)com/contact/
extrem3hunt said:
Hi, I have fixed my HARD bricked phone with the help of Alejandrissimo, contact him and tell him about your problem and he fix your phone online.You will need to know some basic knowledge of electronics and you will require a piece of wire. This is where you contact him.
unlock-bootloader(dot)com/contact/
Click to expand...
Click to collapse
Well, okay, imma give it a try, tnks.
Before flashing your "bricked" device, try this!
Mr_Pistachios said:
Turned on my phone after 10+ tries.
What I did:
1) Plugged out battery, held power button
2)Without releasing the power button, insert the battery.
Repeat until phone turns on.
Moral of story: Persistence pays off. Nah jk.
Click to expand...
Click to collapse
YOU SAVED ME! We have an Xperia Play at work and it wouldn't boot. Plugged it in USB and the HS-USB QDLoader 9008 Device came up. I read your post, did the power+battery thing 8 times, and it magically came back to life!
I wouldn't believe it if someone told me, but for some reason this seams to work. removing the battery and plugging it back in did not work for me, but holding down the power button did the trick.
:good::victory:
proteusgr said:
YOU SAVED ME! We have an Xperia Play at work and it wouldn't boot. Plugged it in USB and the HS-USB QDLoader 9008 Device came up. I read your post, did the power+battery thing 8 times, and it magically came back to life!
I wouldn't believe it if someone told me, but for some reason this seams to work. removing the battery and plugging it back in did not work for me, but holding down the power button did the trick.
:good::victory:
Click to expand...
Click to collapse
HAHAHAHA LOL.
Glad it worked out for you
My guess is that there's something loose inside, and repeatedly trying to do that may help.
I think it's something to do with Sony's build quality, or maybe because the phone sustained hard knocks and stuff. (Probably just wear and tear)
Aledranssimo didn't reply me, so yea. T.T
This issue is probably an intermittent one I guess. I've since moved on and gotten a new phone (Lumia 520)
So I bought 2 sgh-t989 at the same time... one for me and the other for my sister
she lives in another city but whenever we see each other, I've always tried to make sure that her phone is running the exact same setup as mine just so I can always provide "tech support" for her phone
anyway, she went on some trip and afterwards, she said her phone wouldn't boot up anymore
since she couldn't get a hold of me, she brought her phone to a store to try and get it fixed (bad bad mistake)
she left the phone at the store for a day to determine how much it would cost to fix it
after being quoted $100 for the fix, she decided it was too much to pay and just took her phone back
long story short... a week later, I finally have the phone in my hand... and this phone won't boots up, i've put in fully charged batteries and when I press (and hold) the power button, it does absolutely NOTHING... not even that initial vibration when it boots up
i've tried to plug it to the computer and it doesn't get recognize
its permanently off and i can't, for the life of me, figure out just how to even boot this thing into TWRP... just so I can attempt to recover her files
SO.... my question... is this truly bricked?
do I have to break the news to her that all the pictures she took on the trip is now unrecoverable?
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
JesusWazBlack said:
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
Click to expand...
Click to collapse
it doesn't get recognized at all... cuz there's no way for me to power it up
chan1628 said:
it doesn't get recognized at all... cuz there's no way for me to power it up
Click to expand...
Click to collapse
Definite hard brick and if you do hook it to the computer and it says qhs usb download that means brick as well.
Sent from my SGH-M919 using Tapatalk 2
richardlibeau said:
Definite hard brick and if you do hook it to the computer and it says qhs usb download that means brick as well.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
.... it is as i expected
thx for the help though
chan1628 said:
.... it is as i expected
thx for the help though
Click to expand...
Click to collapse
Had three myself in the past few years but none recently so don't feel bad happens to the best of us.
Sent from my SGH-M919 using Tapatalk 2
richardlibeau said:
Had three myself in the past few years but none recently so don't feel bad happens to the best of us.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
oh man... i hate giving the "i'm sorry, but I can't recover your pictures" speech
esp. to women... sometimes they cry and its so....
wish me luck:good:
JTAG for 50 bucks and your golden
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jtag
holeindalip said:
JTAG for 50 bucks and your golden
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I am hard bricked as well tried updating to new cm10.2 nightly with AJK kernel accidently installed AJK kernel for wrong version oops and now hard bricked wont turn on what so ever. Looked into what phones can be fixed with JIFFY box and JTAG and noticed SGH-t989 not in the list so i am just wondering if this list is wrong and SGH-t989 can actually be saved!?!? any help is appreciated.
Mobile tech videos can fix ya up for 50 if is indeed hard bricked
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I bricked my S2 last Saturday night, just got it back form Jtag service. Took a week and 28 bucks from the ebay vendor that performed the service.
Now that my phone is back to stock, can anyone help me to load TWRP again. I have odin, latest USB drivers, and TWRP for my phone...but cant seem to get to the ODIN restore screen on the phone.
Volume Up, down, left right, left right, A, B Start. Oh wait I think that was for contra.....
Please help to get me to the Odin load on phone.
I can then flash TWRP thru odin, get to TWRP and load my favorite ROM.
Any GURUS, Please confirm that this is right. I remember a complicated process when rooting initially, loading root file on SD card, similar process up down ect....
But since the rom I am flashing is already rooted, is it required to go thru the gyrations. cant I just flash TWRP and flash a rooted rom?
dss4me3 said:
..
But since the rom I am flashing is already rooted, is it required to go thru the gyrations. cant I just flash TWRP and flash a rooted rom?
Click to expand...
Click to collapse
Just Odin flash TWRP and then flash your rooted ROM.
Download mode= Volume up + volume down + plug USB into computer.
Wont boot up, just keeps vibrating, bricked?
JesusWazBlack said:
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
Click to expand...
Click to collapse
I want to know if my phone is bricked, its a Samsung glaxy sgh-T898 (but from telus) i am using a cynagenmod custom rom 10
i was using it then it went idle then when i went to unlock it back, it shut off and started to repeatedly vibrate like a pulse
so i then did a battery pull and then it vibrate and the "Samsung sgh-t898 logo appeared" for a sec or 2 and the phone shut back off and did the pulsing vibrating thing
i got the same result when i plug it into the charger and computer, even plug it in without the battery in it and pulsing vibrating happen again.
ps this had happen in the past but the phone came on like after 5 mins of, its now been hours it wont come on just keep vibrating
omari3 said:
I want to know if my phone is bricked, its a Samsung glaxy sgh-T898 (but from telus) i am using a cynagenmod custom rom 10
i was using it then it went idle then when i went to unlock it back, it shut off and started to repeatedly vibrate like a pulse
so i then did a battery pull and then it vibrate and the "Samsung sgh-t898 logo appeared" for a sec or 2 and the phone shut back off and did the pulsing vibrating thing
i got the same result when i plug it into the charger and computer, even plug it in without the battery in it and pulsing vibrating happen again.
ps this had happen in the past but the phone came on like after 5 mins of, its now been hours it wont come on just keep vibrating
Click to expand...
Click to collapse
looks like the sticky power button. First try putting compressed air on your power button. then resort to this method http://forum.xda-developers.com/showthread.php?t=1931310
JesusWazBlack said:
looks like the sticky power button. First try putting compressed air on your power button. then resort to this method http://forum.xda-developers.com/showthread.php?t=1931310
Click to expand...
Click to collapse
Thanks for replying so quickly , i think you might be right about sticky power button, because when put in the battery the vibrates begins
automatically and then i try turn on then hold the power and volume keys it entered into download menu but for 2 secs then shut off again and begin to start vibrating(pulsing again)
so i guess the download menu means its not brick, will try suggestion once i get a proper torque screw driver
My mate has been having issues over the past month or two powering on. It seems very temperamental. Now it won't power on at all. The phone does display the battery status when plugging it in though. I was thinking that it was probably the ribbon cable for the power button. I cannot enter recovery or anything. It seems the power button is just totally unresponsive. What do you think?
snowman2765 said:
My mate has been having issues over the past month or two powering on. It seems very temperamental. Now it won't power on at all. The phone does display the battery status when plugging it in though. I was thinking that it was probably the ribbon cable for the power button. I cannot enter recovery or anything. It seems the power button is just totally unresponsive. What do you think?
Click to expand...
Click to collapse
i guess fastboot devices doesn't do annything when attached to your computer? :crying:
henk_j said:
i guess fastboot devices doesn't do annything when attached to your computer? :crying:
Click to expand...
Click to collapse
can't do that as the phone wasn't in developer mode
Have you tried the adb or fastboot option and know it does not work of have you not tried it because you think it will not work?
Just a being thouroug question
SvenHee said:
Have you tried the adb or fastboot option and know it does not work of have you not tried it because you think it will not work?
Just a being thouroug question
Click to expand...
Click to collapse
do you think you could give a noob like me a little help with this as I have tried this method many many times and always have trouble to the point of no success
snowman2765 said:
do you think you could give a noob like me a little help with this as I have tried this method many many times and always have trouble to the point of no success
Click to expand...
Click to collapse
When you press power and volume down until huawei logo appear, its in adb mode.
Did you try this?
[email protected]
theoppositeman said:
When you press power and volume down until huawei logo appear, its in adb mode.
Did you try this?
[email protected]
Click to expand...
Click to collapse
yes, as I said, power button is totally unresponsive. No worky
Well, I'm a noob myself.
I had a lot of trouble getting things done in windows xp, I think the drivers for the mate were troublesome all the time. Also, changing usb port and cable made a big difference.
But I found out that in linux things worked a lot easier. I now only use xp for rooting the mate, all other stuff I do on linux.
In the process of installing custom roms on my last two phones I found that you have to keep trying to find another way to get where you want, which is why I asked about what you have tried.
But is could very well be a hardware problem, in which case repair could be the only option.
If you are up for a bit of linux expolartion, you can install ubuntu on a usb stick and run it of of that, without installing it on a pc.
Use a 4 gb one and make sure that you alocate space to save stuff on the stick. Install adb and fastboot from the software center and I think you would be able to use adb and fastboot without the troublesome phone drivers for the mate.
snowman2765 said:
yes, as I said, power button is totally unresponsive. No worky
Click to expand...
Click to collapse
Oops, my bad.
Well if its a hardware issue, its better to send it to SC.
It might be because of the buttons carbon thats getting thinner from usage.
I hapoen to hv a friend with the same problem and sending it to SC will solve it.
Without power button fully functional, it will be hard to do many things..
[email protected]
Remove the memory card then press and hold the volume up and insert the memory. Release the volume up when you see some light on screen.
Sent from my HUAWEI G700-U00 using XDA Premium 4 mobile app
---------- Post added at 09:16 PM ---------- Previous post was at 08:37 PM ----------
After that, go to google play and download the application VOLUME POWER so that you can turn your screen on when your phone is on sleep mode if you press the volume botton.
Sent from my HUAWEI G700-U00 using XDA Premium 4 mobile app
Rhonald said:
Remove the memory card then press and hold the volume up and insert the memory. Release the volume up when you see some light on screen.
Sent from my HUAWEI G700-U00 using XDA Premium 4 mobile app
---------- Post added at 09:16 PM ---------- Previous post was at 08:37 PM ----------
After that, go to google play and download the application VOLUME POWER so that you can turn your screen on when your phone is on sleep mode if you press the volume botton.
Sent from my HUAWEI G700-U00 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
there isn't a micro sd in the phone