Develop Bugs

[Q] stock bootloop help

my wifes lg optimus g pro e980 is stock unrooted and stuck in bootloop, the ringer stopped working today after checking volume settings i restarted it and its been bootlooping ever since. tried factory reset and lg flash tools and they didnt work factory reset did nothing and flashtool ran its course but failed three times dont know what to do any help would be great thanks in advance

dhdneophyte said:
my wifes lg optimus g pro e980 is stock unrooted and stuck in bootloop, the ringer stopped working today after checking volume settings i restarted it and its been bootlooping ever since. tried factory reset and lg flash tools and they didnt work factory reset did nothing and flashtool ran its course but failed three times dont know what to do any help would be great thanks in advance
Click to expand...
Click to collapse
Stock unrooted and it did that? Did she drop it or get water in the phone somehow? What error did it give (if any) in the flashtools? At what part of the booting process does it stop?

eL_MeXiCaNo said:
Stock unrooted and it did that? Did she drop it or get water in the phone somehow? What error did it give (if any) in the flashtools?
Click to expand...
Click to collapse
Hello, I have the same problem of bootloop in CWM.
It begins after performing a factory reset from Android settings.
I have a G PRO F240L rooted whit this method : http://www.technostall.com/lg-optimus-g-pro-f240-root-and-install-custom-recovery-image/
I tried to follow this method http://forum.xda-developers.com/showthread.php?t=2420219 but it fails because of error "insufficent battery"... while my battery is fully loaded..
Thank you for your help

eL_MeXiCaNo said:
Stock unrooted and it did that? Did she drop it or get water in the phone somehow? What error did it give (if any) in the flashtools? At what part of the booting process does it stop?
Click to expand...
Click to collapse
yes it was dropped but in a heavy duty case worked fine all day til the ringer stopped no error message in the flashtools it just says error and it stops at lg screen with lights flashing on home button edit shows error F0000002 can anybody tell me how to find out what that means

(D851 TMO) Stuck onfactory reset status 2.

Hello guys,
I was just recently trying to go back from Cyanogenmod 12.1 to stock...
I used the TOT method and it installed and then everything was fine.... until it restarted, after lg flash tools was done... Then, now i'm stuck on ( factory reset status 2) Screen...
I have searched everywhere and some say to try KDZ method... I tried KDZ method too and no luck at all.
I even tried to factory reset it, Power + VOL DOWN ... Nothing... Boots again into (mini os) Then goes too (lg g3 factory reset status 2 screen) Blue screen.
I've verified the TOT file, I have verified the DLL file and the megalock.dll
ALl have been downloaded twice, from two diff places and both same results....
I have tried using the original usb cable, as well as 2 others.... No changes...
I am sure that I have set it to (com41) Through device manager and still same...
I can't get passed %6 anymore on flash tools... As soon as it hits (Change to DL MODE) It fails (15secs) Then it says (Can't change to download mode) FAILS
I've tried everything. If anyone can help me it would be much much appreciated.
I have work tomorrow and idk what to do /:
Thx in advance!

Thanks for nothing.... -.-
(Solved)

malimt said:
Thanks for nothing.... -.-
(Solved)
Click to expand...
Click to collapse
Sorry mate I just found this post. May I inquire as to the solution?

Check out the comments on the bottom.
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/

Phone won't start after CSE flashing a KDZ. Won't go nowhere other than Download Mode

Phone is LG G Pro F240L. I had the latest update (Lollipop) installed and let's just say I wasn't satisfied with it.
I flashed Kitkat KDZ like normally but it got stuck on bootloop, then I CSE flashed using the Kitkat KDZ and now it won't do anything other than go to download mode.
I would really appreciate any help to get my phone back to normal and fast. Thanks!
EDIT: I should also add that I've tried the PC suite recovery method but it says my phone's battery is too low when it's not.
UPDATE: I think I've hard bricked my phone. Damn...

tress19991 said:
Phone is LG G Pro F240L. I had the latest update (Lollipop) installed and let's just say I wasn't satisfied with it.
I flashed Kitkat KDZ like normally but it got stuck on bootloop, then I CSE flashed using the Kitkat KDZ and now it won't do anything other than go to download mode.
I would really appreciate any help to get my phone back to normal and fast. Thanks!
EDIT: I should also add that I've tried the PC suite recovery method but it says my phone's battery is too low when it's not.
UPDATE: I think I've hard bricked my phone. Damn...
Click to expand...
Click to collapse
Reflash the kdz again.before that check whether you are flashing the correct firmware of the correct model.
Now flash your kdz through lg offline flash tool.you can get that by searching in this xda forums.so even if your battery is below 60% it continues to the next step.But it is recommended to have minimum 60% of battery level.after opening lg offline flash tool you choose the kdz,then after choose cse flash.thats it.because it worked for me.or if your phone goes intlo reccovery mode,simply you can factory reset the data,perform 3 wipes(factory reset,cache and dalvik cache) and reboot.It may work sometimes.update me after u did these steps.if worked hit thanks. (i want to help you.thats why,i said what i know.)

brick my lg g pro f240....
krishna13 said:
Reflash the kdz again.before that check whether you are flashing the correct firmware of the correct model.
Now flash your kdz through lg offline flash tool.you can get that by searching in this xda forums.so even if your battery is below 60% it continues to the next step.But it is recommended to have minimum 60% of battery level.after opening lg offline flash tool you choose the kdz,then after choose cse flash.thats it.because it worked for me.or if your phone goes intlo reccovery mode,simply you can factory reset the data,perform 3 wipes(factory reset,cache and dalvik cache) and reboot.It may work sometimes.update me after u did these steps.if worked hit thanks. (i want to help you.thats why,i said what i know.)
Click to expand...
Click to collapse
mine lg g pro f240 got dead no light won't switch on after using lg flash tool 2014. after root with kit kat I'm upgrade again to lollipop after verifying 100% it stuck in download mode and do nothing...then died......
damm I'm brick my phone..plzz help

LG G4 Stuck In Firmware Update - Stock Reset?

Hi, recently decided to reset my phone back to stock as I had some trouble with a few programs after resetting my phone. I tried factory reset but the programs didn't work so I decided I would try to just restore to stock and start fresh. I followed a guide on how to do the stock restore using LGUP/LG Flash Tool. I followed the guide and put the KDZ File into the program and pressed cse flash. The program worked till around 12% then it got stuck and just didn't work anymore. It said error so I kept trying over and over as some guides on this problem said to keep trying.
Nothing has happened and my phone is now stuck on firmware update screen. I have taken the battery out multiple times and replaced it back in and turned the phone on but it automatically goes to that screen after showing the lg logo. I have tried the volume down and power button factory reset but that doesn't work and tried getting onto download screen if that was any help but couldn't do that either. Now I'm stuck here... Any help? Don't have any other phone and can't afford to get a new one so I would like to try fix this anyway possible.
After failing the flash update thing the program says failed my phone says 0%. It went to 1% once and then just went back to 0% after it didn't work. So don't know if it's been changed in anyway. All help appreciated.

Did you have LG up set at refurbish or upgrade.....

stinka318 said:
Did you have LG up set at refurbish or upgrade.....
Click to expand...
Click to collapse
I did refurbish first as I wanted to start new and it didn't work even though I did it a few times. I tried upgrade after and still nothing. Also have tried Uppercut and that does the same as normal LGUP.
The furthest % it got to was 19 on the computer and 8 on the phone and then it just stopped again. It usually stays between 11-19%. But most of the time 11%-16%

Have you made sure that it is the right region......
Try to down load just tot file and try that....

stinka318 said:
Have you made sure that it is the right region......
Try to down load just tot file and try that....
Click to expand...
Click to collapse
Where would the TOT files be? Can't seem to find any for LG H815 v20i ?
And what program should I use to do it?

Janny1993 said:
Where would the TOT files be? Can't seem to find any for LG H815 v20i ?
And what program should I use to do it?
Click to expand...
Click to collapse
This may help...........
http://storagecow.eu/index.php?dir=Xda/LG+G4/
If that don't work try this..........
https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260

Phone has black screen will not boot.

Hey my zenfone 2 got screwed up after I factory reset it and it kept booting to twrp so I tried to return to stock with the xFSTK tool but it kept giving me black screen I can feel the phone vibrate that is it I cannot see anything on the screen. Any tips?

Doglover78 said:
Hey my zenfone 2 got screwed up after I factory reset it and it kept booting to twrp so I tried to return to stock with the xFSTK tool but it kept giving me black screen I can feel the phone vibrate that is it I cannot see anything on the screen. Any tips?
Click to expand...
Click to collapse
buddy who told you to use xFSTK to return to stock. you would have asked for help before. now you have the only hope xFSTK. does it completes successfully? try ifwi from latest MM firmware and flash with xFSTK.

fixed it thx
sukhwant717 said:
buddy who told you to use xFSTK to return to stock. you would have asked for help before. now you have the only hope xFSTK. does it completes successfully? try ifwi from latest MM firmware and flash with xFSTK.
Click to expand...
Click to collapse
fixed it thx