Dose anyone know of any scases or covers that will protect my phone from magnetic fields ? And also welding spatter and metal shards ? Thanks
Related
Has anyone removed the Metal LCD Cover Plate from the Exec? My one has a few dents in it and I want to debrand it. I have a Milling machine at work that I can use to cut myself a new plate, all I need too do I work out how to remove the old one without damaging the the rest of the cover.
D.Apsley said:
Has anyone removed the Metal LCD Cover Plate from the Exec? My one has a few dents in it and I want to debrand it. I have a Milling machine at work that I can use to cut myself a new plate, all I need too do I work out how to remove the old one without damaging the the rest of the cover.
Click to expand...
Click to collapse
hi
i have your problem but i contrite for removing that(after removing it geting worse) since i haven't laser cutter or milling machine i cant do any thing and i forced to stik lather instead of metal
i recomend you if you want to do that embed a tiny knife or blade betwen the plastic part and metal plate if you use long knife it better embed it far as you can (becareful you may cut your hand / scratch plastik part use a piece of cloth to prevent this) then rotate the knife or pull it up-> (use two khife at the same for pulling up) and be careful the plate maybe lost her face
sorry for my bad English
i hope these are usefull for you
Sounds just like I suspected the Metal cover plate is stuck down with a double sided tape then.
Nice idea the leather, could add some protection.
Hi !
I am not REALLY sure, if this can help you, but I think so. I do not remember, where I found this, but it helped me, when I had to exchange the front cover of my Universal some months ago...
http://rapidshare.com/files/114813770/mda_pro_service_manual.pdf.html
I hope this helps !
Cheers,
Otto
I've got this manual already, what I what to do is remove the metal plate fitted in the centre of the top cover. Basicaly I want to de-brand my XDA uni form the Mobi operator and to pimp my XDA Uni.
The manual only gives info on removal of the complete top cover but not the metal plate.
Hey everyone,
Wondering if the owner of a monaco aluminum case could tell me if the hard plastic window that covers up the touch screen could easily be removed from the case? It would be great if someone could post a few pics of the back inside of the case.
I am thinking of getting this case but I would want to remove the plastic window so I can use my touch without having to open the case up for simple tasks.
Anyone know where I could get a protector for the camera lens? Or how I would go about making something to protect it myself? I've had my Wildfire just over a month and its starting to scratch already. Thanks
Look for a 3M protective film for the screen, special for wildfire. Mine came also with a small circular protective film designed to protect the lens.
Add on top of that a silicon case and your phone will last a lifetime. Unscratched, anyways.
My phone is already protected with a silicone case and screen protector The closest thing I can find is a 3M Vikuiti Screen Protector, is this the same?
Yes. That's the one. The downside is you will have frequently the surface covered up in grease from your skin, when you talk.
Ordered, thanks!
I will buy it too , camera scratch really much.Screen is not so susceptible on scratches.
nemuro said:
Look for a 3M protective film for the screen, special for wildfire. Mine came also with a small circular protective film designed to protect the lens.
Add on top of that a silicon case and your phone will last a lifetime. Unscratched, anyways.
Click to expand...
Click to collapse
can you give a link please ?
I must buy it too! I will buy it for sure.
Hi all,
I'm into photography and the lens is one of the most precious component in my galaxy note.
Has anyone came across a case/battery case/add-on that has a lens cover? I'm particulary after a sliding lens cover. I don't really want to put screen protector in front of the lens as it'll affect photo quality.
If you've seen any.. please provide links.. thanks
FYI, I've googled.. with no luck
cheers
Lens protector
Here's my solution. Might not be the prettiest. If you find a circular piece of rubbery sticker or something simmilar it might be even better. Doesn't even need to be this thick. Doesn't even need to be out of rubber. I just like the extra friction when I lay my phone on the desk.
I hated the idea, that the phone rests on the lens when I put it down.
What do you think?
I found similar solution like @vgergo but you dont need to destroy battery cover. I ordered leather back battery cover from ebay, it is a bit ticker than original one and it provides arround 1mm edge arround lens so it is protected when putting your phone down. Back is nice finnished and it fits as it should so I can reccomend it.
Hello, as you can read in the threadname, my question is, if the z1 compact has a anti shatter film on its backside. And does anybody know wich material it is. Plastic or glass? I own the european model.
Thanks a lot
European version has plastic... And there is no any anti shutter sadly you need to remove back plastic panel of you want change
Unfortunately I have tried to peel the film. So the bravo of my phone looks very ugly. Now I have to order a new backcover for assembly. Any tips or tricks about it. I know there are many videos,but..... I am a little bit angry about the water resistant of the phone,if I assemble the backcover.
Film is included an preinstalled on the inner surface of the backcover. That's good to know.
Once again any tips or tricks?
Thanks allot
Only advice from me is that you should go to company which is official service and check how much it will costs to change backpanel (you should by glass one) it will do on warranty and should keep water resistant(I think) but you can give it a try if you have something that in your city
Maybe putting on something like that is an alternative: http://m.ebay.de/itm/121335821880 I find it quite beautiful on mine, optically as well as haptically.
AlexandreVegetaroux said:
Unfortunately I have tried to peel the film. So the bravo of my phone looks very ugly. Now I have to order a new backcover for assembly. Any tips or tricks about it. I know there are many videos,but..... I am a little bit angry about the water resistant of the phone,if I assemble the backcover.
Film is included an preinstalled on the inner surface of the backcover. That's good to know.
Once again any tips or tricks?
Thanks allot
Click to expand...
Click to collapse
- Make sure the plastic frame surround does not lift at all along with the back, or you'll end up ****ing the frame glue and it's goodbye waterproofing and hello phone that creaks when you hold it
- There's a reason why professionals use an evenly heated flat surface - hairdryers/heatguns/similar will increase your chances of ****ing the frame glue
- Use isopropyl or similar to get the internal surface absolutely clean
- Heat it again slightly after applying the new back
- Apply loads of pressure (eg put it under some books)
- After it's all dried, make sure you can't lift the back AT ALL if you put your fingernail in the groove above the LED flash. If it lifts you will end up with a foggy camera lens from normal use and a ****ed phone if you expose it to water