Hello.
I bought the new device TYTN Hermes 100 about a week ago and found next problem.
After work(for example: play the music or game, turn on WiFi and etc.) with device for 30-40 minutes the touch screen start to respond not correctly.The try to align screen gone on in the endless loop.
I tried Soft reset,Hard reset - nothing helps.
The single solution,I found is to recharge the battery.
I want to watch out that, the battery charging in the case of above problem shows minimum 80%. I tried to change the battery, but have the same problem.
One thing more: all functions are available to do with keybord and short cut buttons of device.
Is anyone ha had the problem like this?
Thank you.
Hey guys, I guess I have my first serious problem with that phone now...
Last night I was just writing in WhatsApp and suddenly the screen flickered like hell and the phone shut down. Couldn't boot up since.
Sometimes I manage it to boot into recovery but I can't really do much because the screen starts flickering again and it shuts itself off. Also I managed to boot the device twice but it started flickering instantly and shut off...
Also I noticed that it just turns on when I connect my charger - even though the battery should be full as I charged it over night and it wasn't even empty back then.
Is it just my battery or is my GN dying? Or is it just some software thing? Pls help me...
GN GSM
Carbon Rom (KitKat)
DirtyV Kernel (23.4.)
TWRP (newest)
Hi,
it just stop and hang this morning, the screen hold at the moment it hang .... i tried hold the power key for >15 sec but not respond .... bluetooth no respond too ....
so what can i do? other then wait for the battery die out?
please help!
thanks!
Joseph
Josephzhu said:
Hi,
it just stop and hang this morning, the screen hold at the moment it hang .... i tried hold the power key for >15 sec but not respond .... bluetooth no respond too ....
so what can i do? other then wait for the battery die out?
please help!
thanks!
Joseph
Click to expand...
Click to collapse
I'm having the exact same issue, screen isn't responding and won't switch off, despite how long I hold in the power button.
Anyone got any suggestions?
Same here. Someone can help?
Ok, mine eventually died.
Whatever happened was draining the battery as the watch was warm the whole time (instead of my normal 2-3 days, it died in around 4-5 hours).
Plus point is that after plugging it in to charge, it switched back on and is currently working fine, it's sitting on my desk charging now. However am more than a little concerned about this happening again.
I've had same issue twice - first time when installing TWRP recovery (understandable ) and today having a lot of saves to watch creating a watch face. Both times reacting like,
st0nec01d said:
Whatever happened was draining the battery as the watch was warm the whole time (instead of my normal 2-3 days, it died in around 4-5 hours).
Plus point is that after plugging it in to charge, it switched back on and is currently working fine, it's sitting on my desk charging now. However am more than a little concerned about this happening again.
Click to expand...
Click to collapse
I think there is a memory leak in software.
I've had a major issue where the watch turns off local Bluetooth after getting hot. The only way to turn Bluetooth on again is to turn the watch off and then charge to 100%, last turn on again and then reconnect.
This started after the 5.0.1 Update.
Sent from my D5803 using XDA Free mobile app
The same issue
Hi!
I have the same issue. Sony SW 3 is connected to Sony Xperia Z Ultra. This issue is the second one, the first time I managed to reset SSW 3 by long pressing (about 10-20 seconds) the button on the watch.
I've got the same problem but screen is off. I cannot wake it (or turn it ON). I was charging it, it was turned off, after 30 mins of changing it vibrate, I unplugged it and now it seems dead. What can I do? t
Try long press the power button?
Powright said:
I've got the same problem but screen is off. I cannot wake it (or turn it ON). I was charging it, it was turned off, after 30 mins of changing it vibrate, I unplugged it and now it seems dead. What can I do? t
Click to expand...
Click to collapse
Calvin Gross said:
Try long press the power button?
Click to expand...
Click to collapse
yes i do. Probably solved the problem. I don't know why but, also if in charge, my watch reached 0% on battery, so it wasn't unable to load up. This morning tried to turn it on (yesterday it woke up for 2 sec, after it died, plugging in into charge was a waste of time) , and in the few second it turned on (in the bootlogo), i put it into charge. Now seems to work but that's quite strange because yesterday i put it on charge when it was about 10%
My SW3 hanged again this morning, i charge it overnight and when i unplugged the charger, it hanged.
as usually, nothing can reset the watch until it burn out the battery. it really annoying and i hope google or sony will fix this soon.
I had it happen once to me too, I wonder if there is some sort of memory leak or some other issue.
I have not been in the habit of powering off my watch but maybe a good idea?
I had the exact same issue was skipping through song then it froze waited 4hrs for battery to drainn
drain turned it back on and it said 0% battery so I reset it and it said 2% battery but every now and then it freezes and I have to reset it holding power for 15 sec also I notice more lag in lollipop and it did freeze on me not too long ago
The 5.0.1 Lollipop Wear update is a piece of sh!t. My Smartwatch3 was rock solid until it came along.
- Currently waiting for the battery to drain so it can come to life again...
When I charge my battery and it is 100% my TAb S is switching off. I only see the battery picture showing 100%.
I did a hard reset and a clear install without results. Anyone an idea what happens?
Are you saying it switches off completely or the screen does?
It switches off completely, not only the screen.
I had this problem a couple of weeks ago,has soon has the tablet booted up it would switch off then I would have to boot up again,then it would switch of again.i had the battery changed by Samsung about a month ago it started switching off since that battery change,the new battery started discharging just like the first battery,the tablet is now back with Samsung,i am hoping to get it back in the next couple of days,lets hope they fix it this time.Longlegs
After charging phone to 100 it will only work for short time and then it will randomly shuts down (usually the moment u use it, like unlocking the screen or getting a call). And then it wont turn on until u start charging. Sometimes when u plug it back in battery is at ~90%, sometimes it goes back to 0. I was thinking it was battery's fault but almost every time this happens my phone does some kind of soft reset, sometimes my themes reset back to stock, sometimes my saved wifi dissapear, notification settings reset, etc. Phone has the screen replaced a year ago too if that could add to it.
You can try to revert it to stock, but most probably is a battery problem.
I've been using my phone for 3 years already and a half year ago I noticed that id didn't hold a charge when the battery went below 30 % . it randomly shut down below 30 % epsecially when I tried to take photos or use flash (that require high Amperage) . Sometimes it restarted itself after unexpected shut down and as I noticed dalvik cache was formatted/deleted. so I had to login to my google account set themes and etc. after I upgradet to 7.0 every unexpected shut down began to worry me becaouse even app data began to dissapear. So a week ago I ordered a new battery and now I am relieved . in my opinion it's 100% battery problem .
Definitely a dead battery. 3 years is a long time for these batteries. You did well to get that long from it!.
Thank you for this thread. I was starting to go loopy because I thought it may have been some app. Same issue and I need to find a battery guy.
Sent from my HTC One M9