Just a heads up, when buying a screen protector, make sure the sensor is uncovered. I see a lot of screen protectors that covers the sensor, and that will definitely cause all sorts of issues with the proximity sensor!
Just to wake this thread up, I finally put my Reallook on that does cover camera and sensors and I have no issues with it. I've actually never had a problem with this brand.
Sent from my Moto Ghost
hidea said:
Just a heads up, when buying a screen protector, make sure the sensor is uncovered. I see a lot of screen protectors that covers the sensor, and that will definitely cause all sorts of issues with the proximity sensor!
Click to expand...
Click to collapse
I'll second this. I had a screen protector from Skinomi that wasn't cut right. I figured, what the heck - its clear, just like the glass beneath it, right?
Every time I made a call, the screen shut off as if I had the phone to my ear and activated the prox sensor. Ripped that screen protector off, and everything was fine.
I'm kinna interested to have this screen protector : http://www.spigen.com/brands/google/nexus-5/nexus-5-screen-protector-glas-tr-nano-slim.html
I was wondering
1. Is there any possibility that this type screen protector may scratch my device screen? As it is made of glass material too.
2. Is it possible to tear it off in the future, without leaving any mark and scratches on my device screen? As in the future, I might feel like I may not want to have a screen protector on my screen. Or, I would like to change a new screen protector.
3. Also, it seems that this screen protector doesn't have a cut-off hole for front camera and other sensors. Will it affect the quality of front camera, and other sensors?
Thanks.
Cheok
1. The back is adhesive... The most its going to do is leave some sort of residue like duct on glass as an extreme example.
2. Yes it can come off. This is a screen protector... Not a screen damager. I think you are misunderstanding the point of it.
3. No, front camera quality is not reduced.
I had the exact same one and it literally let me down like massively. Started getting random air bubbles in it, which were impossible to get rid of without taking the damn thing off. Been running naked since then.
I have this screen protector and I haven't had any problems at all. It has micro scratches on the screen protector but my screen should be just fine.
tl;dr: I put on a LOCA screen protector, but the fingerprint scanner did not work.
So when I received my S10+, I immediately went to my nearest mall to buy a tempered glass screen protector, because I was afraid that I would drop it, and crack my shiny new phone. They showed me a LOCA screen protector and they said that it supported the in-display fingerprint scanner, and because the whitestone dome glass was also LOCA, I agreed to buy it. When I got back home, first I removed the plastic screen protector, then removed any fingerprints or dust, then I carefully put on the LOCA glue in the middle, then put the glass on, tiled it left and right to make sure the glue fully touched the glass and placed it on the table, then UV cured the top, middle, and bottom, each for 15 minutes. After it was done, I carefully used a razor blade to remove excess, making sure not to remove the glue touching the glass, then powered on my S10+. The touch was working normally, so I went into settings, searched fingerprint, and tried to register my finger, but it kept saying "Press a little harder", or "Make sure your finger fully covers the fingerprint scanner", etc. I pressed harder, but nothing happened. So I went to the mall again and decided to exchange for a plastic screen protector. So if you don't want to waste money, DO NOT BUY A RANDOM BRAND SCREEN PROTECTOR. Even if they tell you its LOCA or that it supports the in-display screen protector, don't buy it unless its a Whitestone Dome Glass or another screen protector that has been confirmed to work with the fingerprint sensor, in which case go for it.
I think even with the Whitestone Dome you had to press on the fingerprint area while curing to make sure the fp scanner worked. So I'm guessing it would be the same with the non Whitestone ones.
Sent from my [device_name] using XDA-Developers Legacy app
jadaress1 said:
I think even with the Whitestone Dome you had to press on the fingerprint area while curing to make sure the fp scanner worked. So I'm guessing it would be the same with the non Whitestone ones.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
No need to press on the FP during curing with Whitestone. Just do some extra curing and first at the bottom.
XDDDD12345 said:
tl;dr: I put on a LOCA screen protector, but the fingerprint scanner did not work.
So when I received my S10+, I immediately went to my nearest mall to buy a tempered glass screen protector, because I was afraid that I would drop it, and crack my shiny new phone. They showed me a LOCA screen protector and they said that it supported the in-display fingerprint scanner, and because the whitestone dome glass was also LOCA, I agreed to buy it. When I got back home, first I removed the plastic screen protector, then removed any fingerprints or dust, then I carefully put on the LOCA glue in the middle, then put the glass on, tiled it left and right to make sure the glue fully touched the glass and placed it on the table, then UV cured it for 15 minutes. After it was done, I carefully used a razor blade to remove excess, making sure not to remove the glue touching the glass, then powered on my S10+. The touch was working normally, so I went into settings, searched fingerprint, and tried to register my finger, but it kept saying "Press a little harder", or "Make sure your finger fully covers the fingerprint scanner", etc. I pressed harder, but nothing happened. So I went to the mall again and decided to exchange for a plastic screen protector. So if you don't want to waste money, DO NOT BUY A RANDOM BRAND SCREEN PROTECTOR. Even if they tell you its LOCA or that it supports the in-display screen protector, don't buy it unless its a Whitestone Dome Glass or another screen protector that has been confirmed to work with the fingerprint sensor, in which case go for it.
Click to expand...
Click to collapse
Curing for 15mins??? Was this a personal decision on your part to cure for 15 minutes? To the second post, yes you're correct that Whitestone Dome updated their instructions to push down on the sensor in between curing sessions.
Sent from my SM-G975U using Tapatalk
nunyabiziz said:
Curing for 15mins??? Was this a personal decision on your part to cure for 15 minutes? To the second post, yes you're correct that Whitestone Dome updated their instructions to push down on the sensor in between curing sessions.
Sent from my SM-G975U using Tapatalk
Click to expand...
Click to collapse
Yes, it was my personal decision since I searched up how long to cure and the search result i saw said 15 mins so I randomly decided to do that, but also see edit, I did top, middle, bottom each for 15 mins, so should've been enough, the bottom for a bit more longer. After knowing it didn't work, cured it for 2 hours, but it still didn't work.
I tried the WhiteStone on my S10+ and it didnt work too well... even after following each step to the T. The FP was hit and miss each time, became annoying really quickly so off it came
I did think it might have been an error on installation but checking out the Amazon reviews, many people have the same issue.
I think a good idead would be a Tempered glass protector with a cutout for the FP sensor which is then covered by a TPU attached to the glass
Anyway, thats me done. Taa
I installed a ''ramdom'' brand instead of White Stone because it was much cheaper and came with 2 protectors. I did press a little at the bottom where the sensor is located. And the sensor was working, but not very reliable. Now with the new update for biometrics it has improved a lot.
My experience with the Whitestone on the S10+:
My first install I got a huge bubble. This is despite having done about 5 installs on my S9+ I upgraded from. I mistakenly dropped the pin when the glue hit the arrows instead of when the glue touched the glass. I did the cleaning of the phone and glass before curing. Note: I couldn't get the absorption pads in, so it made a huge mess in the tray.
Second install was with my "cleaned" glass. The install went much better. There were two annoying but acceptable bubbles. I only noticed them on white bg or when the screen was off. The FPS was very hot or miss. Turned out there were micro bubbles barely noticeable below the FPS and below the speaker. Apparently they were causing a problem even though it wasn't where the sensor was. It was enough to throw it off. I did the 1 minute press at install. Success rate was about 2/10.
I contacted WSD about how to do a warrenty, using Facebook messenger. I was willing to pay for the replacement. I figured the error was in my cleaning of the glass. They ended up sending out the replacement for free. No pictures or anything needed.
Third install went off without a hitch. The replacement shipped with the absorption pads installed. They now hook into the top tray instead of putting into the bottom. I did the 1 minute press and cured 2 or 3 minutes each top and bottom. Success rate is now 17/20, which is just as good or better than what I got on my 9+. The latest patches seem to help a ton.
Notes:
I'd read someone say after the latest patch to redo finger prints with a little pressure as possible. This seems to have made a big impact for me.
I've read that if you're hands are dried out, that can affect things. I definitely have more problems when my hands are dried out.
Sometimes my thumb will move slightly during the scan. This results in an almost definite fail.
Lifting my thumb too fast seems to contribute to fails. If I leave my thumb on until it clears, I have almost perfect recognition.
How to do choose tempered glass screen protector for any brand mobile
One thing that comes hand in hand with a new smartphone is screen protector. Two major materials for a screen protector can either be a plastic film or tempered glass. Tempered Glass screen protector is preferred over the plastic screen protectors because it offers better protection. So, what could be some of the criteria in choosing the best-tempered glass screen protector? To help you choose the right one, I carefully selected the 4 criteria below:
Toughness
Touch sensitivity
Edge to Edge cover
Smudge-Proof
This is some key criteria when choosing the screen protector
Maybe buy a flip case and leave the Samsung fitted protector
I considered various options then decided a working fingerprint sensor was more important to me than a glass screen protector so just bought a faux leather flip cover with magnetic clasp (£2.99 on eBay)
What I noticed with the whitestone is that it takes a few days for the fingerprint scanning to get better. Its still not as good as without a screenprotector, but on day 1 i couldnt even register my fingerprint, since then every day its a bit better.
Recently purchased the whitestone dome glass and installed it. Been using it for almost a week now and fingerprint scanner works pretty well for me (95% of the time). Was hesitant due to bad reviews but gave it a shot and I'm pleased with it. I followed the instruction video on their website and installed with no problems.
dezborders said:
I considered various options then decided a working fingerprint sensor was more important to me than a glass screen protector so just bought a faux leather flip cover with magnetic clasp (£2.99 on eBay)
Click to expand...
Click to collapse
I ended up buying the Neo Flex Screen protector and Spigan neo hybrid case absolute brilliant so glad I did. I've had them on now for about 2 months working in the building trade so my screen goes through a lot dust and all sorts and this screen protector has done brilliantly.
Sent from my SM-G975F using Tapatalk
Hi, I'd like to ask if Mi 10T Lite has already factory applied protective foil on the main camera glass. I've noticed little weird spot on one corner of camera that looks like peeling off foil. I'm almost sure that this phone has factory applied protective film on screen but I'm not sure if this exist on rear camera as well.
I thought to. But when I look closer I dont see anything , no foil no nothing, just glass. The only protection is the ring around camera that when you put your phone on table, not screech glass
My one had a soft screen cover. Recently I removed it and fitted a glass one. Much smoother action on screen now. Well worth replacing.
Tried two different tempered glass screen protector s with my S20 5G - one claiming to allow the fingerprint reader to work.
Neither work as it seems that the distance from the finger to the reader is too far (when trying to set up a fingerprint it only shows a small section, around 30%, of the print in the centre, and not enough to store/recognise it.
Has anyone found one that actually work.
PS: I have a tendency to drop my phone, so am only after a tempered glass one - I would hazard a guess that the problem does not exists with a silicon protector.