As the title says i am trying to install the Saberkat 1.5 rom on my SGH-I317. I am using Philz recovery and i am on the 4.4.2 bootloader. I was running DN3 previously and attempted to do a clean flash to Saberkat 1.5. The installation of the rom goes fine, but when i reboot the phone gets stuck at the Samsung screen for 15+ mintues. I have gone through the Saberkat 1.5 forum post, but i can not find anyone who is having the same issue as myself.
Thank you for any help you may be able to provide me.
Avaleria said:
As the title says i am trying to install the Saberkat 1.5 rom on my SGH-I317. I am using Philz recovery and i am on the 4.4.2 bootloader. I was running DN3 previously and attempted to do a clean flash to Saberkat 1.5. The installation of the rom goes fine, but when i reboot the phone gets stuck at the Samsung screen for 15+ mintues. I have gone through the Saberkat 1.5 forum post, but i can not find anyone who is having the same issue as myself.
Thank you for any help you may be able to provide me.
Click to expand...
Click to collapse
Format everything except the sd card like the system the preload boot dont format the modem tho and then reboot the recovery and it should say if you wanna root hit no the flash the rom like normal and it should work
terpin32 said:
Format everything except the sd card like the system the preload boot dont format the modem tho and then reboot the recovery and it should say if you wanna root hit no the flash the rom like normal and it should work
Click to expand...
Click to collapse
That is what i always do. I format everything except for the sd card, and wipe both caches. I selected no at the root screen, and it gets to the samsung screen and just sits there.
Avaleria said:
That is what i always do. I format everything except for the sd card, and wipe both caches. I selected no at the root screen, and it gets to the samsung screen and just sits there.
Click to expand...
Click to collapse
I had a similar problem when I first tried to flash DN3 v5 4.4.2 (from Skynote Air 4.3 w/4.1.2 bootloader). The problem was that I was using an old version of Philz (5.5) and it would always stick at the "Samsung" screen after the flash. I switched to Philz 6.41 and it worked fine after that. The only problem is that the backups are not compatible (6.41 can't restore 5.5 and 5.5 can't restore 6.41).
I will attempt this when I get home, will advise on the outcome.
jsdad said:
I had a similar problem when I first tried to flash DN3 v5 4.4.2 (from Skynote Air 4.3 w/4.1.2 bootloader). The problem was that I was using an old version of Philz (5.5) and it would always stick at the "Samsung" screen after the flash. I switched to Philz 6.41 and it worked fine after that. The only problem is that the backups are not compatible (6.41 can't restore 5.5 and 5.5 can't restore 6.41).
Click to expand...
Click to collapse
Updated to the latest Philz version, and still gets stuck at the Samsung screen. I am going to flash TWRP and try again to see if that makes a difference.
Avaleria said:
Updated to the latest Philz version, and still gets stuck at the Samsung screen. I am going to flash TWRP and try again to see if that makes a difference.
Click to expand...
Click to collapse
I couldn't get twrp to work I only got it to work on Philz after I formated everything and I mean everything but the modem and the ext sd card then reboot the recovery and then just flash the rom and only the rom first if it doesn't have a boot sound it won't work
terpin32 said:
I couldn't get twrp to work I only got it to work on Philz after I formated everything and I mean everything but the modem and the ext sd card then reboot the recovery and then just flash the rom and only the rom first if it doesn't have a boot sound it won't work
Click to expand...
Click to collapse
I appreciate your help, i havnt had issues with any other rom. Ive done DN3, EzKat, Slimfast, and they all installed and booted up perfectly. I will chuck it up to bad luck and try a different rom.
Avaleria said:
I appreciate your help, i havnt had issues with any other rom. Ive done DN3, EzKat, Slimfast, and they all installed and booted up perfectly. I will chuck it up to bad luck and try a different rom.
Click to expand...
Click to collapse
4.4.2 is the only I had problems with not booting but Philz is the only one I can get every rom to boot
Funny thing, I tried to flash Saberkat 1.0 and it worked fine. Must be something with 1.5 that isn't working
/Close this thread please
Related
Hi
i figured out how to update my original firmware of 4.1.1 on my Note 2 N7105 LTE to 4.1.2 by downloading this tar.md5 (N7105XXDLL4_N7105TMHDLK8_TMH) through Odin
and it seemed to work because in "about device" it says im running 4.1.2 and it also seems to be a REALLY annoying European T-Mobile version because of the short and LOUD t-mobile video every single time i open and close my phone.
I also installed CWM-based Recovery v6.0.1.5-jb which works perfectly (thank god)
now when i tried to boot the deodexed rom for N7105XXDLL4 through recovery via sd card. everything seems fine i can choose all the options in sequence and when i get to the end it tries to install (percentage bar) but stops very quickly and reboots me to recovery mode...the first time i did that it forced me to restore from backup (because it wouldnt boot at all) and the second time i did it it made me reboot and the samsung logo appeared followed by "android is upgrading 0 to 162" I WAS SUPPPPER HAPPPPY!! but i was crossing my fingers...low and behold the phone did boot but all the fonts and everything else were EXTREMELY tiny and a message kept popping up saying SystemSU has closed or something..
I obviously restored back to t-mobile 4.1.2 (hungarian)
Is there something wrong im doing during the installation? should i try and upload it through odin or something instead of through my sd card??and how do you do that?? i mean it cant be the wrong deodexed because i chose the first one for xxdll4 and it the installation does boot on my phone..
i mean everything looks great except for the fact that it stops at the beginning of installation and reboots me to recovery prematurely....
ANY HELP???!!!! THANKS!!!
Proced a factoty reset, erase format all except SD Csrd in CWM optiond.
Install TWRP via CWM
Install update uding TWRP
pirata****zu said:
Proced a factoty reset, erase format all except SD Csrd in CWM optiond.
Install TWRP via CWM
Install update uding TWRP
Click to expand...
Click to collapse
id be more than HAPPY to thank you!! trust me!! :good:
considering im a tad of a noob..
can you refer to a link or a bit more details on how to proceed with all this??
and also what will this all do for me??
in the end i want 4.1.2 and a custom rom to replace the 4.1.2 tmobile that i already have. and obviously keep some sorth recovery (i already have cwm) other than android recovery 3e.
when i boot recovery mode when i go to wipe data/factory reset
i dont have an option to erase all except sd card...
how do i install twrp?? where is it? and what is it??
install what update using TWRP?? the custom rom?? or another 4.1.2 update??
sorry im trying to understand all this....
TWRP is other kind of recovery. Try a fredh install using it.
http://forum.xda-developers.com/showthread.php?t=1956939
But, before, wipe/factory reset using CWM
Install TWRP (.zip file) using CWM
Reboot recovery
Install new tom using TWRP
pirata****zu said:
TWRP is other kind of recovery. Try a fredh install using it.
http://forum.xda-developers.com/showthread.php?t=1956939
But, before, wipe/factory reset using CWM
Install TWRP (.zip file) using CWM
Reboot recovery
Install new tom using TWRP
Click to expand...
Click to collapse
i just installed openrecovery-twrp-2.4.0.0alpha-t0lte.img.tar using ODIN
without doing any factory reset or anything through CWM and it worked...is that bad? im going to try and load rom now....
ari770 said:
i just installed openrecovery-twrp-2.4.0.0alpha-t0lte.img.tar using ODIN
without doing any factory reset or anything through CWM and it worked...is that bad? im going to try and load rom now....
Click to expand...
Click to collapse
now im stuck what are the steps to install deodexed rom in TWRP?? or any rom for that matter....
if i go and press install and select rom file and swipe to comfirm flash,it stops and says "failed" in red
E:/unable to open zip file etc etc
ari770 said:
now im stuck what are the steps to install deodexed rom in TWRP?? or any rom for that matter....
if i go and press install and select rom file and swipe to comfirm flash,it stops and says "failed" in red
E:/unable to open zip file etc etc
Click to expand...
Click to collapse
So i finally got it to run deodexed installation on TWRP..i have no idea how lol...i wiped cache and delvik cache and it ran and installed and rebooted
the only issue is that i dont see any difference at all...except for the fact that there is no tmobile video when i restarted my phone...
how do i know if deodexed is installed??? i dont even have phone record..and it gave me the option to install it and its not there...hmmmm
im so lost....
btw how to i get to customize this new rom??
thanks
hello, on my notes I have a 2 rom DN3.0 today I wanted to go to 3.1, but after starting the procedure flash aroma and all of the phone is locked. I removed the battery and I rebooted into recovery, full wipe, flash retried this time it went a bit further but it was locked again. Removed the battery and restarted the phone, the recoverynon me access to the external SD, after several attempts I managed to get the menu of the backup-restore, see the file, begins recovery and crashes, I remove the battery and restart again, but not now goes into recovery.
What could have happened? and how can I fix it? give me a help?
Thank you and .... sorry for the bad English, but the fault is Google translator!
Same problem
Serjo61 said:
hello, on my notes I have a 2 rom DN3.0 today I wanted to go to 3.1, but after starting the procedure flash aroma and all of the phone is locked. I removed the battery and I rebooted into recovery, full wipe, flash retried this time it went a bit further but it was locked again. Removed the battery and restarted the phone, the recoverynon me access to the external SD, after several attempts I managed to get the menu of the backup-restore, see the file, begins recovery and crashes, I remove the battery and restart again, but not now goes into recovery.
What could have happened? and how can I fix it? give me a help?
Thank you and .... sorry for the bad English, but the fault is Google translator!
Click to expand...
Click to collapse
+1 I have the same problem. Anyone?? :crying:
NO ADVICE?
Serjo61 said:
NO ADVICE?
Click to expand...
Click to collapse
If the phone freezes after Aroma installer starts it is probably a bug with recovery. Try flashing older version of Philz (v5.x).
dalanik said:
If the phone freezes after Aroma installer starts it is probably a bug with recovery. Try flashing older version of Philz (v5.x).
Click to expand...
Click to collapse
unfortunately when I turn on my phone it remains stuck on the SAMSUNG NOTE II screen and does not move from there
how can I do?
I317 or 7105??
Sent from my SGH-I317 using Tapatalk
note 2 7100
Try using the latest twrp
Sent from my SGH-I317 using Tapatalk
I can not seem to go into recovery, then I tried to flash with odin an old version of phliz, now came into recovery, I'm trying to restore the old ROM but locks control md5 sums
possible that there is a file restore damaged?
I solved it with the flash from odin of Philz, full wipe then install new rom, I flashed the DN3.1 and all ok!
Thank you all for the help!
And season's greetings!
Serjo61 said:
I solved it with the flash from odin of Philz, full wipe then install new rom, I flashed the DN3.1 and all ok!
Thank you all for the help!
And season's greetings!
Click to expand...
Click to collapse
Your still on a old version flash 3.1.1 then download ota 3.2 but flash that through recovery. I use twrp and it boots everytime
Sent from my SGH-I317 using Tapatalk
the problem was that I could not get into recovery, but I solved it with odin and now I installed the DN3.1.1
I have a Samsung galaxy note 2 LTE n7105 in a boot loop, i was trying to flash ''http://forum.xda-developers.com/showthread.php?t=2761937'' but under the installation a made the mistake of wiping everything on the device including the rom that was saved on the internal phone memory, i also had a 4.4 bootloader and Philz CWM touch recovery..
so when i put the device in download mode it does it fine and odin finds it, but it wont go in recovery, it just shows the bottom touch keys of the recovery then goes into a boot loop again, i would like to flash it to stock again without unrooting it if possible but i need to know whats wrong here?
athoxworld said:
i would like to flash it to stock again without unrooting it if possible but i need to know whats wrong here?
Click to expand...
Click to collapse
Recovery must work fine since you didn't messed it up. Try again and try to flash rom from sd card. If not, flashing stock rom using odin is the next best option (will remove root though). Goodluck.
Fixed
erljayp said:
Recovery must work fine since you didn't messed it up. Try again and try to flash rom from sd card. If not, flashing stock rom using odin is the next best option (will remove root though). Goodluck.
Click to expand...
Click to collapse
Fixed the problem, just flashed stock 4.4.2 rom with odin and it was in fully working order, then i flashed CWM Touch with odin then installed the the rom i wanted in the first place, jumped over deleting everything, and now it works great ^^
Note 2 I317m
I'm trying to add DN3 v5 but after adding mod and rebooting i get stuck on the Samsung logo.
I downloaded the correct DN3 from here electron-team / ROM_NOTE2LTE/
I have the newest Philz CMW recovery
I did the clean, erase data, and Dalvik. After it didn't work I went back and did the clean.... 3 timed in a row then attempted to install the ROM again and it still gets stuck on Samsung logo.
I was running the newest LiguidSmooth until trying this ROM. Now even it gets stuck on loading screen. HELP.
check bootloader version
palguire said:
Note 2 I317m
I'm trying to add DN3 v5 but after adding mod and rebooting i get stuck on the Samsung logo.
I downloaded the correct DN3 from here electron-team / ROM_NOTE2LTE/
I have the newest Philz CMW recovery
I did the clean, erase data, and Dalvik. After it didn't work I went back and did the clean.... 3 timed in a row then attempted to install the ROM again and it still gets stuck on Samsung logo.
I was running the newest LiguidSmooth until trying this ROM. Now even it gets stuck on loading screen. HELP.
Click to expand...
Click to collapse
Make sure you have a 4.3 bootloader i had the same problem.
I had issues with this rom as well but im also sure that it is the bootloader
I had this problem and for some stupid reason I had to flash to 4.1.1 then 4.3 then HAD to flash with Philz recovery to get it to boot if you don't get a boot sound it didn't work
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
palguire said:
Note 2 I317m
I'm trying to add DN3 v5 but after adding mod and rebooting i get stuck on the Samsung logo.
I downloaded the correct DN3 from here electron-team / ROM_NOTE2LTE/
I have the newest Philz CMW recovery
I did the clean, erase data, and Dalvik. After it didn't work I went back and did the clean.... 3 timed in a row then attempted to install the ROM again and it still gets stuck on Samsung logo.
I was running the newest LiguidSmooth until trying this ROM. Now even it gets stuck on loading screen. HELP.
Click to expand...
Click to collapse
Hello All.
These are the specifics listed in regards to this issue. Try re-flashing and pick N7105 instead.
"Be Sure to Pick N7105 instead of I317 or I317M, otherwise you will stuck at "Samsung" glowing logo!!!"
http://forum.xda-developers.com/showthread.php?t=2541860
Try flashing using twrp .. does the aroma installer start up when you flash the rom ?
Also wipe the internal. I flash the rom with twrp 2.7 and I am with 4.1.2 bootloader so I think you should be okay if you have older bootloader. What I did is wipe eveything, dalvik, cache, data, internal in TWRP. Then during installatin, i did not choose wipe data and then select what I want to install. Then when it asks for reboot, I said yes, noticed if you did not, the phone will get stuck with black screen and I had to pull the battery to reboot. During the first boot up, it will take about 5-10 min with samsung logo and colors flying across the screen. Then it should proceed with setup. I did notice once where I had issue where it will get stuck in samsung logo after the flying color screen but after pulling the battery out, it rebooted fine.
how i fixed it
palguire said:
Note 2 I317m
I'm trying to add DN3 v5 but after adding mod and rebooting i get stuck on the Samsung logo.
I downloaded the correct DN3 from here electron-team / ROM_NOTE2LTE/
I have the newest Philz CMW recovery
I did the clean, erase data, and Dalvik. After it didn't work I went back and did the clean.... 3 timed in a row then attempted to install the ROM again and it still gets stuck on Samsung logo.
I was running the newest LiguidSmooth until trying this ROM. Now even it gets stuck on loading screen. HELP.
Click to expand...
Click to collapse
I was having the same issue. I ended downloading the latest twrp and was able to flash it ok. The only problem now was that my baseband was unknown, so cellular data wasn't working.
I downloaded the stock rom (I317MVLUDNF1_I317MOYADNF1_RWC), mine is a Rogers' phone. Got everything working again with the stock rom, radio was back. I tried flashing DN3 again but this time used this ROM: DN3_v5_N7105_by_E-Team and it worked just fine.
I haven't really had any issues so far. Hope this helps.
Thank you
stouch000 said:
I was having the same issue. I ended downloading the latest twrp and was able to flash it ok. The only problem now was that my baseband was unknown, so cellular data wasn't working.
I downloaded the stock rom (I317MVLUDNF1_I317MOYADNF1_RWC), mine is a Rogers' phone. Got everything working again with the stock rom, radio was back. I tried flashing DN3 again but this time used this ROM: DN3_v5_N7105_by_E-Team and it worked just fine.
I haven't really had any issues so far. Hope this helps.
Click to expand...
Click to collapse
I ended up re flashing back to the stock rom, although I using I317MVLUDNF3_I317MOYADNF3_RWC. I was away for a few days and that stock got my through it. There is something wrong with the update that update and my phone as it causes it to shut off/freeze after begin locked for a long time. Hopefully that doesn't happen with the DN3.
Anyways, today I added the newest TWRP, and did the data clearing in it, then flashed with DN3_v5_N7105_by_E-Team. This time it worked. I wonder if it didn't the first time because I was using Philz or if it was because I was going from LiquidSmooth to DN3. Either way if anybody has issues I would suggesting reverting to the stock ROM then doing TWRP then DN3.
Thank you all for your help.
Hi
CharliexCharger said:
Hello All.
These are the specifics listed in regards to this issue. Try re-flashing and pick N7105 instead.
"Be Sure to Pick N7105 instead of I317 or I317M, otherwise you will stuck at "Samsung" glowing logo!!!"
http://forum.xda-developers.com/showthread.php?t=2541860
Click to expand...
Click to collapse
FYI, that step does not apply to DN3 V5, that only applies to DN3 V3.1.1 I know because I had to re-read the flashing steps 3 times before cluing in that mid way through it switched to instructions for V3.1.1 and previous versions. I could not figure out why it was not prompting me until I tried flashing v3.1.1.
guys,,,,am also having the same issue.
my model is N7100 - and i wana flash dn3 v5 using twrp 2.8 .
but the thing is that after flashing the dn3,it got stuck at samsung logo.(the one which shows galaxy note 2) not the glowing one
do i have any solution ? please guys
Soo.. I decided to install Cynogen Mod 5.1.1 onto the Note 2. And, All worked fine....
But here is an issue. A while back I had to unlock the phone, which required me to install TWRP.. Now the issue is i think i installed it into the Boot instead of recovery.. So now whenever i select ANY power option in TWRP, the phone restarts into TWRP again.. Now, All i had to do was just do a battery pull and all was good.. Except for now..
I tried to update CM through TWRP, but it did something and now the phone boots into TWRP no matter what. I got the Android universal toolkit or whatever running and trying to fix the boot.img, But have been unsuccessful so far..
So, Any help that i can get would be appreciated.
Things I have done:
1. Reflashed boot.img with original.
2. Reflashed recovery with newer twrp
3. Factory reset, formated/
4. Installed backup with 4.4.2 installed still
5. Googled everything
Click to expand...
Click to collapse
AFTER 5 HOURS OF WORK I FIXED IT!
I reinstalled the Original recovery. Then rebooted, and it all worked.. 1:02 AM and tired as heck....
Can you tell me how you installed the original recovery? I did the same thing and now all my phone boots into is TWRP.
Alright.. It's a bit of a Google.. But you gotta find the original recovery for the phone on the web.. The recovery for the gt-n100 or whatever works. So look for that.
J.Naw said:
Alright.. It's a bit of a Google.. But you gotta find the original recovery for the phone on the web.. The recovery for the gt-n100 or whatever works. So look for that.
Click to expand...
Click to collapse
Okay thanks! I managed to find the one for my phone