[Q] - N7100XXUFNG4(FND2) to N7100XXUEMK9(MJ9) - Galaxy Note II Q&A, Help & Troubleshooting

Good day to all!!!
I've gone into bootloop, and having a hard time finding a link to my previous rom which is N7100XXUEMK9-COA(MJ9). So I decided to download at Sammobile a N7100XXUFNG4(FND2) -Philippines coz I'm from Philippines. And I flashed it thru odin. Installed PhilzTouch, rooted and done. After using it for a few days, while reading some threads to other forums. I finally found a link to my previous rom. I've successfuly downloaded it.
I'm just wondering if I can directly flash this N7100XXUEMK9(MJ9) back to my phone which is N7100XXUFNG4(FND2) now using odin again? Can I flash this without losing my IMEI, Modem, Wifi or my EFS being corrupted?
By the way 4.4 is fine. But on my own observation, it drains my battery faster than 4.3. So if there's a chance getting back to 4.3, maybe I'll grab the chance. If it's going to be complicated, maybe I won't do it anymore.
Sorry for a the long story. Hope somebody can help me. Thanks all.

Anyone? Please. Thanks.

asin_punk said:
Anyone? Please. Thanks.
Click to expand...
Click to collapse
I am unsure about this, if you have upgraded bootloader, you are stuck with latest bootloader, however you can downgrade rom, unless I am mistaken.

(InsertNameHere) said:
I am unsure about this, if you have upgraded bootloader, you are stuck with latest bootloader, however you can downgrade rom, unless I am mistaken.
Click to expand...
Click to collapse
Thanks. But actually this has been answered to the other thread of Dr.Ketan. Here's his post http://forum.xda-developers.com/showpost.php?p=55076259&postcount=571
dr.ketan said:
You can't downgrade with Odin if your existing bootloader is kitkat. Though you can use mobile din to downgrade to 4.3. And regarding IMEI, No one can say whether you will lose it or not because even you doing everything correct there are still minimal chances to lose it (any bad flashing can cause it) but make EFS backup and copy it to multiple places. I stroingly recommend to make backup efs in .img format (search play store for "Dr.Ketan Hindocha" and you will find IMEI Tool N7100/N900 which makes backup on said format)
Click to expand...
Click to collapse
and here is his thread http://forum.xda-developers.com/showthread.php?p=55098886#post55098886
But anyways, thanks for your reply. Mod can now close this. Thanks.

Related

[Q] Factory Reset back to stock?

long story short: I screwed up my D2CAN (Telus) with a D2ATT recovery, flashing a ported ROM from a Sprint S3 (MSG_Chubz ROM)
Now if somone wouldn't mind sharing some knowledge on how i can go about going back to complete Stock, i'd be forever greatful...
I am hoping to return to stock using Odin, and then want to Re-Root so I can flash stuff safely again.
Can someone suggest how I can go about doing this, without bricking my phone?
So in a nut shell: Would i basically Flash the (.tar) file I used to root my phone in the first place, with Odin?
Then after that, restore, or re-download the recovery of my choice, or is it a tad more complicated then I'm thinking?
Your thinking is correct. Flash the correct rooted carrier firmware, boot into stock recovery and wipe data and cache. Then proceed with a custom recovery via goo manager or rom manager. Make a backup
xBeerdroiDx said:
Your thinking is correct. Flash the correct rooted carrier firmware, boot into stock recovery and wipe data and cache. Then proceed with a custom recovery via goo manager or rom manager. Make a backup
Click to expand...
Click to collapse
Thanks very much my good sir, time to get my S3 functioning again!
Post in this thread if you have any questions or issues. Good luck and cheers
Adizzzle said:
long story short: I screwed up my D2CAN (Telus) with a D2ATT recovery, flashing a ported ROM from a Sprint S3 (MSG_Chubz ROM)
Now if somone wouldn't mind sharing some knowledge on how i can go about going back to complete Stock, i'd be forever greatful...
I am hoping to return to stock using Odin, and then want to Re-Root so I can flash stuff safely again.
Can someone suggest how I can go about doing this, without bricking my phone?
So in a nut shell: Would i basically Flash the (.tar) file I used to root my phone in the first place, with Odin?
Then after that, restore, or re-download the recovery of my choice, or is it a tad more complicated then I'm thinking?
Click to expand...
Click to collapse
Yes, simply flash that in ODIN. It happened to me on my D2ATT. All I did was flash in ODIN and everything worked perfect on Stock again. NOTICE thought that this will most likely unroot your phone, or at least that's what happened to me.
TheReverend9 said:
Yes, simply flash that in ODIN. It happened to me on my D2ATT. All I did was flash in ODIN and everything worked perfect on Stock again. NOTICE thought that this wI'll most likely unroot your phone, or at least that's what happened to me.
Click to expand...
Click to collapse
Not if he uses a rooted firmware tar...like I mentioned already. You must have used unrooted stock. I understand that you're trying to build the 10 posts that you need to be able to post in the development section, but please don't post in a thread just to post. Cheers
All I needed to do was flash the proper modem for 1747m (d2can), and now phone calls and texts work perfectly again.
Thanks for the suggestions and help everyone.
Adizzzle said:
All I needed to do was flash the proper modem for 1747m (d2can), and now phone calls and texts work perfectly again.
Thanks for the suggestions and help everyone.
Click to expand...
Click to collapse
Glad that suggestion helped.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Glad that suggestion helped.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah if it weren't for your suggestion I would be using Odin all over again. So thanks a whole lot man!

Looking for stock restore, GS3 i747 4.3

Hello, I have been here all night trying to recover my GS5 i747, I have TWRP but my phone does not seem to work with Micro SD cards, I was getting a blank SD error when it worked just fine in other phones. Does anyone here have a stock rom I can restore via Odin and be done with this once and for all? Apparently the phone is now wiped and I can only access TWRP and nothing else.
Any help would be appreciated.
Gizmosis350k said:
Hello, I have been here all night trying to recover my GS5 i747, I have TWRP but my phone does not seem to work with Micro SD cards, I was getting a blank SD error when it worked just fine in other phones. Does anyone here have a stock rom I can restore via Odin and be done with this once and for all? Apparently the phone is now wiped and I can only access TWRP and nothing else.
Any help would be appreciated.
Click to expand...
Click to collapse
Here, you can find all the stock rom you need!
www.sammobile.com/firmwares/
patate331 said:
Here, you can find all the stock rom you need!
Click to expand...
Click to collapse
Thanks so much, so are you saying that it's now safe to directly use Odin to downgrade to 4.1 from 4.3 OTA?
I've been reading a lot of warnings against that, and the highest Sam has is 4.1
What precautionary measures would I need to take?
Gizmosis350k said:
Thanks so much, so are you saying that it's now safe to directly use Odin to downgrade to 4.1 from 4.3 OTA?
I've been reading a lot of warnings against that, and the highest Sam has is 4.1
What precautionary measures would I need to take?
Click to expand...
Click to collapse
You can't use Odin if you were already on 4.3 prior to losing your OS. Any attempt to flash 4.1.1 via Odin may result in a hard brick. Since you still have TWRP, use instructions and zip file in the thread below to restore your system to stock 4.3. Hope this works for you ....
http://forum.xda-developers.com/showthread.php?t=2658486
Larry2999 said:
You can't use Odin if you were already on 4.3 prior to losing your OS. Any attempt to flash 4.1.1 via Odin may result in a hard brick. Since you still have TWRP, use instructions and zip file in the thread below to restore your system to stock 4.3. Hope this works for you ....
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
Thankfully yes it works - does anyone know about the horrid suspense when it's booting for the first time?? I was almost to pull the battery when i heard the new device jingle and saw the screen dim lol
Gizmosis350k said:
Thankfully yes it works - does anyone know about the horrid suspense when it's booting for the first time?? I was almost to pull the battery when i heard the new device jingle and saw the screen dim lol
Click to expand...
Click to collapse
Yes, a long delay is not unusual after a firmware restore. Usually, however, this can be avoided or limited if you wipe the cache/dalvik after the restore operation.
Gizmosis350k said:
Thanks so much, so are you saying that it's now safe to directly use Odin to downgrade to 4.1 from 4.3 OTA?
I've been reading a lot of warnings against that, and the highest Sam has is 4.1
What precautionary measures would I need to take?
Click to expand...
Click to collapse
Don't try to downgrade it with Odin. You will brick your device.
You can also try this, I didn't try it but I guess it should work. If you're not sure what you're doing, don't try it.
http://forum.xda-developers.com/showthread.php?t=2625461

[Q&A] AT&T I747 UCUEMJB 4.3 Stock Restore

Q&A for AT&T I747 UCUEMJB 4.3 Stock Restore
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for AT&T I747 UCUEMJB 4.3 Stock Restore. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
help with att galaxy s3
i bricked my galaxy s3 i747 and using enewman17s method here http://forum.xda-developers.com/showthread.php?t=2658486
I downloaded the mk5 file from another one of his posts, and with that download it gives me multiple folders and a boot.img.
Now correct me if I'm wrong, the phone is actually up and running now, but the main problem i have found with it is that the sound is not working at all and videos dont want to play. Do i need the files in those folders and the .img file to make everything work properly? any other information can be provided and all is welcomed thank you.
Can I perform the procedure from 4.0 stock unrooted?
Enviado desde mi GT-N7100 mediante Tapatalk
msedek said:
Can I perform the procedure from 4.0 stock unrooted?
Enviado desde mi GT-N7100 mediante Tapatalk
Click to expand...
Click to collapse
Did you brick you phone while on 4.0? How did you brick it?
No the device is virgin non rooted, new out of the box and unlocked, I want it to be 4.3 unrooted and unlocked
Enviado desde mi GT-N7100 mediante Tapatalk
What is the model? In Canada, the s3 is the i747m. In the USA, the s3 is i747. The i747m bootloader and modem cannot be flashed on a i747.
Stock restore from 4.4.4 Carbon
I'm on Carbon 4.4.4 nightly 20140824-0205. Can I use this to return to stock ?
eric512 said:
I'm on Carbon 4.4.4 nightly 20140824-0205. Can I use this to return to stock ?
Click to expand...
Click to collapse
What bootloader is on your phone? You need to confirm that before proceeding. If you have a 4.4.2 bootloader and you use the 4.3 restore procedure, you could brick your phone.
audit13 said:
What bootloader is on your phone? You need to confirm that before proceeding. If you have a 4.4.2 bootloader and you use the 4.3 restore procedure, you could brick your phone.
Click to expand...
Click to collapse
If I run "getprop ro.bootloader" it says I747UCUEMJB, which is 4..3?
eric512 said:
If I run "getprop ro.bootloader" it says I747UCUEMJB, which is 4..3?
Click to expand...
Click to collapse
Yes, that is 4.3. Make sure you read the instructions very carefully. Flashing is always risky and there is always a chance that you wind up bricking the phone.
audit13 said:
Yes, that is 4.3. Make sure you read the instructions very carefully. Flashing is always risky and there is always a chance that you wind up bricking the phone.
Click to expand...
Click to collapse
Yes, but any more risky than flashing to the Carbon rom I just loaded?
Normally, flashing custom ROMs such as Liquid and Carbon do not flash a modem or bootloader. If something goes wrong, you can boot back into recovery and re-flash or flash a different ROM.
Flashing a stock ROM desktop Odin usually includes a modem and bootloader change. I believe changing the bootloader is the most crucial part to get right.
Hi there, first time poster and I want to thank the OP for the great efforts, write up and support!
I have a rooted ATT SGH-i747 that OTA soft-bricked on the way to 4.4.3 - I was able to get the phone back up and working with the 4.3 .zip and ODIN 3.7 following your thread, and then restored most of my data - but now my phone won't connect to 4G, it's wifi only, and Baseband version is "unknown"
I am assuming I should continue to update to 4.4.2 but I don't want to do further damage...
Any advice on how I can get back on ATT 4G or what my next move should be?
FWIW, I have CWM and TeamEpic-Root-from-Recovery -v5 installed on external SD
dont know if this will help, but maybe a starting point :
http://forum.xda-developers.com/showthread.php?t=2835386
good luck.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
dont know if this will help, but maybe a starting point :
http://forum.xda-developers.com/showthread.php?t=2835386
good luck.
Click to expand...
Click to collapse
Thanks for the quick reply!
Trying to access Mobile Networks my phone keeps telling me to insert the SIM card... and it's in there but it's not recognizing it.
I know the SIM is good cause I can use it in my other phone... now what have I done?
uhhhh.....not sure. hopefully someone more knowledgeable will chyme in. srry
"all i can really do , is stay out of my own way and let the will of heaven be done"
Disregard, im all set. flashed to stock and ota worked to upgrade to kit kat, yay
OCTANEJUNKIE said:
Thanks for the quick reply!
Trying to access Mobile Networks my phone keeps telling me to insert the SIM card... and it's in there but it's not recognizing it.
I know the SIM is good cause I can use it in my other phone... now what have I done?
Click to expand...
Click to collapse
Is the baseband still unknown? If it is, you should determine the bootloader installed on your phone. Sounds like a mismatch between the bootloader and modem.
Thanks bro you just saved my life and my fone's life
thanks a lot bro i was so pissed that i installed the cm 11 and i hated it and when i tried to go back to stock i just coudn't i tried all the methods the odin version it always failed and said that nand write error so i just gave up hope and thought that i would go to the shop in the morning and get the sw changed then at the very last moment i saw your post and i said why not give it a try and i was surprised and equally shocked that it was this simple to flash this rom thanks again bro and stay blessed
Restore i747 from 5.0.1 lollipop to stock rom
i'm in 5.0.1 CM lillipop and i want to restore my i747 to stock rom (4.4.2 KK) i tried to restore in 4.3 but no brick, stuck on AT&T logo ! i tried to return to 5.0.1 and it stuck on CM logo with Circle blue !
HELP
Sorry about my bad english

[Q] Update boot.img

Has anyone got, or able to flash for me, the boot.img from stock N2506EX_23_150108?
Many gratitude points if you could upload for me ?
Thanks.
2nd
babelmonk said:
Has anyone got, or able to flash for me, the boot.img from stock N2506EX_23_150108?
Many gratitude points if you could upload for me
Thanks.
Click to expand...
Click to collapse
Hey I am also looking for this....on a side note are you looking for this because of wifi issues? has anyone found a fix?...pretty bummed wifi is not working on this thing
Could you install the dumps in http://forum.xda-developers.com/oppo-n3/help/looking-dump-boot-img-t2998030 Post #5, then unroot and run the OTAs to get you back up to current?
...
Lum_UK said:
Could you install the dumps in http://forum.xda-developers.com/oppo-n3/help/looking-dump-boot-img-t2998030 Post #5, then unroot and run the OTAs to get you back up to current?
Click to expand...
Click to collapse
I doubt that any stock rom will flash with twrp recovery....in the past with oppo phones (n1, 7a) its always needed stock recovery to flash stock roms...I guess we just play the waiting game until someone can upload the boot image from the updated rom. I'm pretty sure flashing that alone will get wifi back up and running. 07 Or if someone has the stock recovery they could upload....I am unsure if you can just rip it directly out of the rom and flash it....Also on oppo forums they have posted the rom for 5207 I am also unsure if you can flash that to the 5206.
The zip in that thread is images to flash in fastboot?
...
I would think you would have to flash each image individually.... system, boot, recovery ....unless if we start by flashing only the unmodified boot.img to see if it will fix wifi....but i doubt it because i suspect the wrong boot image is what screwed up wifi in the first place...someone please correct me if im wrong
c0dysm1th said:
I would think you would have to flash each image individually.... system, boot, recovery ....unless if we start by flashing only the unmodified boot.img to see if it will fix wifi....but i doubt it because i suspect the wrong boot image is what screwed up wifi in the first place...someone please correct me if im wrong
Click to expand...
Click to collapse
Yes, you're right; the boot image is not compatible with the upgrade; so downgrade to get root. I'm working on trying to upgrade again with the OTA upgrade and then getting the new boot.img and rooting that. More soon I hope!
FYI I tried your images, Lum_UK and found that I couldn't flash boot.img with fastboot, BUT I could dd them from within recovery, so I got myself up and running again.
Yes you'd have to flash all the images by hand one after the other.
edit: Replied before seeing babelmonk's response, please ignore this post.
steps?
babelmonk said:
Yes, you're right; the boot image is not compatible with the upgrade; so downgrade to get root. I'm working on trying to upgrade again with the OTA upgrade and then getting the new boot.img and rooting that. More soon I hope!
FYI I tried your images, Lum_UK and found that I couldn't flash boot.img with fastboot, BUT I could dd them from within recovery, so I got myself up and running again.
Click to expand...
Click to collapse
Can u please list the steps u took I'd like to get back up and running but don't want to screw this phone up any more ....(dd from recovery ) I'm not familiar with this if it is a command
babelmonk said:
Yes, you're right; the boot image is not compatible with the upgrade; so downgrade to get root. I'm working on trying to upgrade again with the OTA upgrade and then getting the new boot.img and rooting that. More soon I hope!
FYI I tried your images, Lum_UK and found that I couldn't flash boot.img with fastboot, BUT I could dd them from within recovery, so I got myself up and running again.
Click to expand...
Click to collapse
I can't get the OTA to work even after downgrading, but I do have a working system running 141228 with that hacked kernel, root and non-broken wireless.
Anyone want a nandroid of it? It's a slight upgrade at least
please
Lum_UK said:
I can't get the OTA to work even after downgrading, but I do have a working system running 141228 with that hacked kernel, root and non-broken wireless.
Anyone want a nandroid of it? It's a slight upgrade at least
Click to expand...
Click to collapse
please hook it up with that nandroid that i can flash in twrp
c0dysm1th said:
please hook it up with that nandroid that i can flash in twrp
Click to expand...
Click to collapse
Here you go, sorry it's taken so long
http://lum.uk/n3/files/N5206EX_23_141228_root_nocd.7z
Extract it into the TWRP backups folder and then restore like any other nandroid.
THANK YOU
Lum_UK said:
Here you go, sorry it's taken so long
http://lum.uk/n3/files/N5206EX_23_141228_root_nocd.7z
Extract it into the TWRP backups folder and then restore like any other nandroid.
Click to expand...
Click to collapse
Thank you how can i buy you a beer paypal?
c0dysm1th said:
Thank you how can i buy you a beer paypal?
Click to expand...
Click to collapse
Don't worry about it
Seems there's only about 4 or 5 people actively working on this phone here, so I'm sure we'll all end up helping each other at some point.
Lum_UK said:
Here you go, sorry it's taken so long
http://lum.uk/n3/files/N5206EX_23_141228_root_nocd.7z
Extract it into the TWRP backups folder and then restore like any other nandroid.
Click to expand...
Click to collapse
Thanks for that, though I haven't tried it yet. Can I ask what it changes? Is it worth the upgrade? My original firmware +root seems to work pretty well already so I may well leave it alone until L or CM comes out.
babelmonk said:
Thanks for that, though I haven't tried it yet. Can I ask what it changes? Is it worth the upgrade? My original firmware +root seems to work pretty well already so I may well leave it alone until L or CM comes out.
Click to expand...
Click to collapse
I have no idea what it changes as it's the firmware my International N5706 was shipped with when it was released last week. It may be different to the US model (though I believe the only difference between the two is the baseband) and is definitely different to the N5707 for Chinese users.
Dude, thanks!!! You saved my life!
I got wifi back AND root!
sivxo said:
I got wifi back AND root!
Click to expand...
Click to collapse
Hi ! when the zip file is downloaded, what is steps to install it please ?
thanks
marakud said:
Hi ! when the zip file is downloaded, what is steps to install it please ?
thanks
Click to expand...
Click to collapse
Sorry. Missed this. Did you manage?
Oppo neo 7 a33f custom recovery plzzz send me

Firmware Update M8 Rogers

Hi, I've talked of this before. The firmware update, I tried returning to stock then attempting to update the firmware through updating the software OTA but that failed no matter what I did. I returned to stock, flashed the stock recovery, and even locked the bootloader. And finally I attempted an RUU but the RUU failed. So now I lost all my data in vain. I rooted the phone again and reflashed it to Insert coin android 4.4.4, ect.. And I currently am really tired of this. Isn't there any way to get through this? I want the new Insert Coin Lollipop but I have S-ON and cant update the firmware. Can someone please help me? It would be really appreciated. Thanks for reading this lousy comment.
Ali7000 said:
Hi, I've talked of this before. The firmware update, I tried returning to stock then attempting to update the firmware through updating the software OTA but that failed no matter what I did. I returned to stock, flashed the stock recovery, and even locked the bootloader. And finally I attempted an RUU but the RUU failed. So now I lost all my data in vain. I rooted the phone again and reflashed it to Insert coin android 4.4.4, ect.. And I currently am really tired of this. Isn't there any way to get through this? I want the new Insert Coin Lollipop but I have S-ON and cant update the firmware. Can someone please help me? It would be really appreciated. Thanks for reading this lousy comment.
Click to expand...
Click to collapse
I don't know anything about Insert Coin. But if you want stock lollipop from Rogers, you could restore a Nandroid backup via TWRP.
For a start, post your fastboot getvar all (without serial no. and imei no.)
Then most probably the nandroid that ikeny mentioned is the right backup.
I'd be more worried about the RUU failing - I wonder what the error code was?
If OP's M8 was Rogers branded, CID ROGER_001, then RUU from Rogers never existed in the first place. Perhaps this explains the error.
ikeny said:
If OP's M8 was Rogers branded, CID ROGER_001, then RUU from Rogers never existed in the first place. Perhaps this explains the error.
Click to expand...
Click to collapse
Yes, that would be correct. That's my first assumption. Although do you have any methods to update my firmware to the latest android 5.1 lolipop?
Ali7000 said:
Yes, that would be correct. That's my first assumption. Although do you have any methods to update my firmware to the latest android 5.1 lolipop?
Click to expand...
Click to collapse
Use the TWRP nandroid backup image at the bottom of the first post -
http://forum.xda-developers.com/htc-one-m8/help/rogers-m8-lollipop-update-error-t3020675
ikeny said:
I don't know anything about Insert Coin. But if you want stock lollipop from Rogers, you could restore a Nandroid backup via TWRP.
Click to expand...
Click to collapse
I'm actually kinda wondering, is there a method to update to lollipop without returning to stock? I don't have S-OFF so I cant update the firmware alone. All I want is to update the firmware somehow and then I'd be able to use the latest Insert Coin Lollipop Rom. Although thanks a ton for that link, I'll use it as my last resort.
ikeny said:
Use the TWRP nandroid backup image at the bottom of the first post -
http://forum.xda-developers.com/htc-one-m8/help/rogers-m8-lollipop-update-error-t3020675
Click to expand...
Click to collapse
So just a confirmation before I get started, I can just restore this backup despite being in a custom rom at the moment? And will this erase all my data on the phone such as media, ext...? Thanks man, appreciate it a lot.
Ali7000 said:
So just a confirmation before I get started, I can just restore this backup despite being in a custom rom at the moment? And will this erase all my data on the phone such as media, ext...? Thanks man, appreciate it a lot.
Click to expand...
Click to collapse
Yes, and yes.
If you want future OTA, replace TWRP with the attached stock recovery as the final step.
ikeny said:
Yes, and yes.
If you want future OTA, replace TWRP with the attached stock recovery as the final step.
Click to expand...
Click to collapse
Hmnn...Thank you very much. I appreciate it a lot. So now that I have downloaded the last link to the first post which named "Rogers_5_0_1.zip" I just have to backup all my media, apps, ect...Then I can restore the lollipop backup, root the phone, then install Insert Coin 5.1. And I'm also assuming the data being wiped is absolutely unavoidable.
Ali7000 said:
Hmnn...Thank you very much. I appreciate it a lot. So now that I have downloaded the last link to the first post which named "Rogers_5_0_1.zip" I just have to backup all my media, apps, ect...Then I can restore the lollipop backup, root the phone, then install Insert Coin 5.1. And I'm also assuming the data being wiped is absolutely unavoidable.
Click to expand...
Click to collapse
After you unzip the file, you will get the TWRP nandroid image. This image is a 100% stock, and all your files and apps will be wiped. Unavoidable. You could follow the second post in the previous link for rooting. Beyond that, you are on your own.
ikeny said:
After you unzip the file, you will get the TWRP nandroid image. This image is a 100% stock, and all your files and apps will be wiped. Unavoidable. You could follow the second post in the previous link for rooting. Beyond that, you are on your own.
Click to expand...
Click to collapse
Thanks man, I appreciate all your support. I also notice that you were the one who posted nandroid. Many thanks for everything pal.
ikeny said:
After you unzip the file, you will get the TWRP nandroid image. This image is a 100% stock, and all your files and apps will be wiped. Unavoidable. You could follow the second post in the previous link for rooting. Beyond that, you are on your own.
Click to expand...
Click to collapse
Hi, I unzipped the Rogers_5_0_1.zip file and it came out a folder named "2015-02-05--12-39-33 LRX22C release-keys" and an img file named "recovery.img." Do I just copy the folder to my backup TWRP folder then ignore the img file? Sorry for being really annoying and asking a lot of question, I just wanna make sure I'm doing it right.
Ali7000 said:
Hi, I unzipped the Rogers_5_0_1.zip file and it came out a folder named "2015-02-05--12-39-33 LRX22C release-keys" and an img file named "recovery.img." Do I just copy the folder to my backup TWRP folder then ignore the img file? Sorry for being really annoying and asking a lot of question, I just wanna make sure I'm doing it right.
Click to expand...
Click to collapse
You don't need the img file now. That was the stock recovery, for later, if you want to replace the TWPR recovery.
ikeny said:
You don't need the img file now. That was the stock recovery, for later, if you want to replace the TWPR recovery.
Click to expand...
Click to collapse
Thanks a ton man, you honestly don't know how thankful I am now. I'm copying the folder right now and I'm gonna restore it.

Categories

Resources