When I am at work, the signal is not great therefore my battery drain tends to be the worst during this time of day. It used to be that with by the time I unplugged my phone (5:45am) until the time I would leave work (3:30pm), I would have anywhere from 25% - 50% battery. I now turn off the DATA & SYNC options in my Notification Bar options and I have been leaving work with about 70% - 75% battery.
My question is;
DATA i am fairly certain is what allows the phone the ability to scan internet or do downloads of any kind. I can still get text messages and phone calls WITHOUT the DATA option enabled. Is there any other feature I am missing with the DATA option??
SYNC i actually have very little knowledge of. What is it about these two features that drain the battery so much faster??? DATA i can understand, but how far reaching and strenuous is the SYNC option, while enabled???
Thanks in advance gentlemen.......
Sync is what allows the phone to keep you Gmail account and contacts up to date with the Google servers.
If you turn off data, you effectively turn off sync as well, as you are cutting off anything that would require data use.
All email accounts won't refresh, notifications from apps like Facebook or Words With Friends won't occur, etc.
SMS will work because texts are sent and received via the voice radio, not the data radio. MMS won't work.
Sent from my SPH-D710 using XDA App
Hey Guys,
Even thought there are a ton of great data usage widgets and applications out there. They all seem to loading extra monitoring upon the default data usage that is already collected. Such a waste of CPU. Do you guys know of any widget that just reads the usage from the default data usage collector instead of using its own collector?
I would appreciate any feedback, maybe I am misunderstanding how they work. I just assume they collect their own data as they all start at 0mb (with the option to adjust the monthly usage so far). I will know it reads from the current data log if it starts the data with the same as the default data usage screen shows.
Much appreciated.
anybody an idea for a widget like that?
Thanks!
Hi,
I need help with set mobile data from operator in Zooper. I have tariff from 16.th to 15.th every month, I want to zooper counted my mobile data monthly from 16.th.
I set #NTMTHM16# but it doesn´t work, mobile shows 200 MB and Zooper shows 5 MB.
How do I set it work?
thx
Nobody knows?
Hey mate,
I've tried the same thing you did and it works normally for me, it shows the same usage of MB as it does in Setting > Data usage, so I don't know what's the problem. Just be sure that you are writing it correctly in Zooper -> #NTMTHM16# . I'm using ZW PRO v2.42.
I have Zooper Pro 2.44 from GPlay. I will wait for new period of month (16th - 15th), because i set up it during the period.
Has anyone figure out what each character of these network data codes do?
#NTMTH1#
NT=network data
T/W/M=Total/Wifi/Mobile
T=???
Last characters could be:
H1/H7=past day / past 7 days
OR
M/MM/MM25=this month / this month? / since 25th
I can't get mine to match up either though. I have:
#NTMTH1# which seems to show today's data correctly for me "17MB" (matches android data usage)
#NTMTM25# shows "1083" but my data since 25th should be 88MB
#NTMTMM25# shows "118" but my data since 25th should be 88MB
Then the question of units, some show MB/KB which looks nice, but it makes progress bars misbehave since they can't differentiate KB and MB.
Anyone clear this all up?
My period begins on the 5th and I use #NTMTHM5# and it seems to do the job for me
Does it match the android settings - data usage screen?
For me right now, Data Usage shows 243MB used while Zooper widget shows 168MB.
It generally does match (or closely approximate) what it says in Data Usage, however I have noticed that it occasionally resets for reasons I have yet to figure out. I think it might be tied to some reset events (manual/battery pull/battery empty), but this is not consistent at all. If I keep a decent charge in it, or only change the battery before it gets below 5% I do not seem to get this data stat reset.
It might be that you had a similar reset of the data variable in Zooper. I would be curious to see if the gap between Zooper and Android remains consistent or widens.
I also noted that the MyATT app which shows data usage differs from the Android Data Usage and Zooper as well
Note: This is for the users who have Nova Launcher installed
My thought is you can create a dedicated icon in the Zooper Widget and go to 'tap on action' in the creator mode. after selecting that option go and find nova activities. and find the settings icon of your phone(i do not care about the model of the phone you might have.). in the nova action menu you'll see all of the apps that your phone currently have(including the system apps). also keep in mind that these icons are displayed in vertical alignment. and each icon is a drop down menu and when you select the icon you want the will be a sub icons and names of the particular actions. in the setting icon, find 'mobile data usage' or anything similar. and select that option. after that save your current settings. go back to the home screen and test it out for yourself. IF YOU DON'T SUCCEED TRY TRY TRY TRY TRY TRY AGAIN.
Is it possible to have a conditional in Zooper widget, whereby it checks if a variable is set or not set, i.e. empty or not empty.
I have 2 variables created in Tasker for cell data usage. Only 1 variable is set at a time, depending on data usage?
Id like to display the results in a zooper widget...what im looking for is something like:
If #TDataGB# is set then display #TDataGB# or else display #TDataMB#
Valiceemo said:
Is it possible to have a conditional in Zooper widget, whereby it checks if a variable is set or not set, i.e. empty or not empty.
I have 2 variables created in Tasker for cell data usage. Only 1 variable is set at a time, depending on data usage?
Id like to display the results in a zooper widget...what im looking for is something like:
If #TDataGB# is set then display #TDataGB# or else display #TDataMB#
Click to expand...
Click to collapse
You could try the following conditional $#TDataGB#=?#TDataMB#:#TDataGB#$
Not a 100 percent sure if it will work though. Just give it a try and see if it does
... on my wife's phone.
Huawei RIO-L01 (G8)
EMUI 4.0
Android 6.0.1
Build RIO-L01C109B311
The Data Traffic Management area used to have an area for this on the main screen and under notifications but after the updates (as shown above) and under notifications but this has since gone. Settings only has paramaters for total data available and usage reminders.
Any guidance is gratefully received.
Thanks.