[Q] M8 Dual Sim elementalx/x-off/xposed - One (M8) Q&A, Help & Troubleshooting

Hi,
I get me new m8 dual sim 2 days ago.... I rooted it, and installed custom recovery.... but I can not install any of the following:
- Elementalx
- x-off
- xposed
I think that I need x-off to install xposed. I tried ElementalX post in XDA but it never work for me.
I hope some one have experience with that.
thanks in advanced

Related

[Q] How can i switch between the dual SIM in CM Rom ?

Hi Everyone,
I just flashed the latest version of the non-official CM 11 Rom for my i9082 device which finally support the dual sim , but there is a little problem i can't switch between the dual sim easily like the TouchWIZ Rom from the notification bar but i should get in the setting>Multi SIM Setting>Voice then select the choosen SIM , that's too steps to make a call from one of the dual SIM.
Any suggestions?
bayuomi said:
Hi Everyone,
I just flashed the latest version of the non-official CM 11 Rom for my i9082 device which finally support the dual sim , but there is a little problem i can't switch between the dual sim easily like the TouchWIZ Rom from the notification bar but i should get in the setting>Multi SIM Setting>Voice then select the choosen SIM , that's too steps to make a call from one of the dual SIM.
Any suggestions?
Click to expand...
Click to collapse
Kindly wait .. Dev are working fully to make everything possible. :good::good::good::good:
Press THANKS if post is helpful

Check if xposed module is compatible with m8 kitkat.

hi guys, i came back to 4.4.3 from 5.0.1 because i think is smoother than lollipop. but now i want to install xposed and try some modules. i used some when i was using kitkat, like sense toolbox, advanced power menu and others. how can i know if these modules are compatible with kitkat?
How about just trying them ?! Do a nandroid backup and return to that when issues appear !
yeah i forgot how simple xposed was in kitkat, in lollipop were so many issues that made me very careful. tried some yesterday and all worked.

Phone booting into safe mode after flashing Xposed

Hi.
I have a rooted Wileyfox Swift with Temasek's UNOFFICIAL Build v18.5 [2015-12-08] and Unofficial TWRP 2.8.7.1 which were all found on xda (thank you!)
I am an android enthusiast and attempted to flash the xposed framework. When it completed, I rebooted and the device went into safe mode. After soft rebooting, I launched xposed but it still said that the device was not supported (same as before) as it runs lollipop.
Please if anybody knows the answer let me know as I've used xposed previously and love it.
Thank you!
silasnicholls said:
Hi.
I have a rooted Wileyfox Swift with Temasek's UNOFFICIAL Build v18.5 [2015-12-08] and Unofficial TWRP 2.8.7.1 which were all found on xda (thank you!)
I am an android enthusiast and attempted to flash the xposed framework. When it completed, I rebooted and the device went into safe mode. After soft rebooting, I launched xposed but it still said that the device was not supported (same as before) as it runs lollipop.
Please if anybody knows the answer let me know as I've used xposed previously and love it.
Thank you!
Click to expand...
Click to collapse
Have not tred on Temasek's ROM but I am using CM12.1 with Xposed. Ummm might I ask what Xposed did you Flash? Try flashing the latest version and see. Also wipe your dalvik cache and cache. That worked for me
Make sure it is Xposed v79 sdk 22 ARM64
Fixed it! Turns out I was using the 2.7 apk not 3.0 alpha!

LG G4 - Volume+ Xposed Module Not Working [MM]

I am trying to get Volume+ to work with my LG G4. However when I reboot, no changes are seen. I have tried using the LG compatibility mode but I've had no success there.
My setup:
LG-H815 (on Vodafone in the UK)
Unlocked Bootloader
Android 6.0 Marshmallow
V20B ROM for the G4 - I have deodexed the system apps to make Xposed work. See HERE: http://forum.xda-developers.com/g4/themes-apps/h815-mm-v20b-deodexed-apps-xposed-t3258980
TWRP 2.8.7
SuperXE Kernel (I've also tried the default 20B kernel but that's not working with Volume+ either)
Root Access with SuperSU 2.68 (systemless)
Xposed v78 (installed through TWRP) - currently, newer versions (from v79 and upwards), G4 users have reported a bootloop. Since there is no fix for this that I have found (yet), I am using v78 which is compatible with all of my Xposed modules.
Yes, I have activated the module and rebooted after any alterations. Other modules are working. If anyone can help, it would be greatly appreciated!
Volume+ v1.3.0 is the version I'm using - I got this from the. Other G4 users claim that it works with the LG compatibility setting checked, but this is not the case for me.
PS: this is my first post on XDA, sorry if I'm doing anything wrong, I'll try to learn from my mistakes
The G4 Tweaksbox also has the feature I was looking for.
I really recommend it to anyone who has managed to get Xposed on their G4.

Any Rom Where Advanced Calling Is Working

Does anybody know of any ROM/Custom that actually has advanced calling working for the Verizon HTC One M9
Gmoney1988 said:
Does anybody know of any ROM/Custom that actually has advanced calling working for the Verizon HTC One M9
Click to expand...
Click to collapse
Two that I've tried and work for me on my Verizon M9 ---
@Golv 's Port ROM from HTC10 ICE to our M9
https://forum.xda-developers.com/showpost.php?p=67358627&postcount=2164
I'm running this right now and VoLTE works properly - problem is I restored from a backup because when I tried to reflash clean version I got stuck at setup screen - easier to just restore backup instead of trying to figure out why.
and...
@LeeDroid 's One M9 V8.3.0-Stable.zip
http://www.leedroid.co.uk/Stable
sidjohn said:
Two that I've tried and work for me on my Verizon M9 ---
@Golv 's Port ROM from HTC10 ICE to our M9
https://forum.xda-developers.com/showpost.php?p=67358627&postcount=2164
I'm running this right now and VoLTE works properly - problem is I restored from a backup because when I tried to reflash clean version I got stuck at setup screen - easier to just restore backup instead of trying to figure out why.
and...
@LeeDroid 's One M9 V8.3.0-Stable.zip
http://www.leedroid.co.uk/Stable
Click to expand...
Click to collapse
OK I will check those out. Thank you
Running LeeDroid's here and as sidjohn mentioned, Advanced Calling does work. Viper's older build, 4.3.0, has it as well. Viper had a 5.x.x series that was based off of an M10 port, so it didn't work. Their latest, proper M9 Nougat based, doesn't have it though....
I don't believe that any non-HTC-based build, i.e. Cyanogen, Lineage, etc has it working.

Categories

Resources