I bought this phone 4 days back and I am facing a sim slot issue. In slot 1 there is no spring so that when I want to bring out the sim I just have to press the sim and it would pop out...instead I have to use a safety pin to get get the sim out...pushing the sim doesn't do anything. Slot 2 works fine...anyone of u faced this problem??? Should I take it to service center already.?
rohanviolin said:
I bought this phone 4 days back and I am facing a sim slot issue. In slot 1 there is no spring so that when I want to bring out the sim I just have to press the sim and it would pop out...instead I have to use a safety pin to get get the sim out...pushing the sim doesn't do anything. Slot 2 works fine...anyone of u faced this problem??? Should I take it to service center already.?
Click to expand...
Click to collapse
Are u using a proper nano Sim or u just cut it using a sim cutter ?
When i bought this phone i had the same issue as i was using a sim which was cut to nano sim size using a sim cutter, latter i went to Airtel and got a Nano sim and since then no issue what so ever
I suggets you to visit your operator showroom and get a new nano sim and it shll be fine
Press thanks if I helped you
No...I have got a nano sim from Vodafone but still same issue....most of the phones have this issue...strange thing....
Related
Hello i've started to have problems with SIM card, sometimes randomly it just pops up window that SIM card is not inserted and all i can do is restart phone and even when i restart it it cannot find the SIM card, i have to pull out the battery and reinsert the SIM to make it work, it might be because of the guy at t mobile who cut the SIM card wrong and it gets dislocated in the solo and also it might be system failure so im asking is anybody else experiencing this?
Yes I experienced this. It was really annoying. I managed to fix it by removing the sim card and wiping it gently using cloth. If that didn't fix it, then ask your carrier for a new sim card, because yours might have become defective.
SIM not detected
Hello, i have the same issue.
Nothing helps. Put in and out different SIM Card's. No one of all SIM are detected.
Could it be, that a self cuted SIM, to Microsim Formfaktor, damaged the SIM Reader of my new Note?
But yesterday it works really fine with the self cuted SIM. In the Evening i put out the cuted SIM und put in a other (Origin) Microsim from an other Carrier, that works fine too.
After that, i put the cuted SIM with an Adapter into my old Desire. Then i have issues with 3G Networks. The Desire find 3G Network, connect to the Network and lost the connection immediately. When i choose only 2G Networks it would connected.
Today at the morning, i want to know what's wrong. Desire or cuted SIM. I put the cuted SIM back into my Note. Boot the Note. If it booting up, it poped up a message, that the Phone must be restart because the SIM has been changed. When the Note reboot again it, it shows a SIM Icon in the Notification Bar and tells it's no SIM Card inside. I tried the other Microsim (OEM cuted) it won't be detected too.:crying:
Does anybody have a solution for me?
Thank you i tried to clean the SIM card a little bith with cloth and spits and grits, did not happen since then, i hope it will be solved, if not i will try to get a new sim card from carrier, after all the SIM card is like +11 years old
Tried putting another sim card in my unlocked note 2, then replaced my sim which is I inside an adaptor to allow a nano sim to fit....alas I am now constantly getting the message no sim.
Have reflashed back to stock, reset, even tried another sim card still the same no sim, even though my imei number etc is in tact, please help
THUDUK said:
Tried putting another sim card in my unlocked note 2, then replaced my sim which is I inside an adaptor to allow a nano sim to fit....alas I am now constantly getting the message no sim.
Have reflashed back to stock, reset, even tried another sim card still the same no sim, even though my imei number etc is in tact, please help
Click to expand...
Click to collapse
your problem is hardware, not software.
you busted your sim module. you have to buy a new sim module. probably one of the small metallic pins caught the hinges of your adaptor when you pulled it out.this is why your sim is no longer read after pulling out your sim.
Thanks for that, that's what it seems like, needs a new sim tray, apparently £35 fitted, so not to bad
Cuttout sim not working :/ :crying:
any one using cutout sim from local shop.??
Im using two cutout sims without problem, maybe the sim wasnt cut out properly? maybe try testing with any other micro sim you may have access to? . You should also see that youre inserting the sim right i once didnt get it working because i inserted the sim backwards (lol, i know, but **** happens). You can go to your sim's gallery and just ask for a micro sim.
archies20 said:
Cuttout sim not working :/ :crying:
any one using cutout sim from local shop.??
Click to expand...
Click to collapse
If am not wrong , u must have inserted sim the other way ..
check the image on the sim slot and insert properly ..
I cut sim by scissor and its working ..lol
Faiyaz5yaz said:
If am not wrong , u must have inserted sim the other way ..
check the image on the sim slot and insert properly ..
I cut sim by scissor and its working ..lol
Click to expand...
Click to collapse
I insert it properly but not working but cutted by mobile company its works on both slot.
Make a new one by going to gallery . u need to give documents and ur old number. New sim will be given to u within some time. New sims have ready cutout which is easy and perfect cutout
Sent from my Micromax AQ4501 using XDA Free mobile app
Hello everyone i am using HTC desire 816 since 10 months without any problems but one week ago in my sim slot 2 sim struck and while removing sim the slot get damage the 3 golden pin outside are looking little bent than comapare to sim 1 slot
and the slot 2 is not showing sim and automatically rejecting sim the moment I insert it does anyone else have this problem
and will HTC coustomer care listen to my problem and solve it under warranty without any cost
Did you got repaired? How much it costs, i have same problem but SIM 1 & 2 both not working. If you got repaired it then tell me how much it costs...
I'm going to be traveling internationally in a few months, and more than likely going to end up on a local SIM where I'm going for while I'm there.
On the single SIM tray there appears to just be a spacer molded into the tray where a second sim would go in the dual sim version. I'm thinking about ordering a dual SIM tray from China on eBay (10 bucks) so I can use the second sim slot in the tray as storage for my not in use sim.
Anyone know of any reason this shouldn't work? I can't think of any reason it shouldn't...
dandrumheller said:
I'm going to be traveling internationally in a few months, and more than likely going to end up on a local SIM where I'm going for while I'm there.
On the single SIM tray there appears to just be a spacer molded into the tray where a second sim would go in the dual sim version. I'm thinking about ordering a dual SIM tray from China on eBay (10 bucks) so I can use the second sim slot in the tray as storage for my not in use sim.
Anyone know of any reason this shouldn't work? I can't think of any reason it shouldn't...
Click to expand...
Click to collapse
You'll have to flash a dual sim firmware package but there's issues with flashing firmware that's not what originally was installed on your moto z play.
You could ultimately loose your IMEI , Which would render your phone useless.
It's just easier to sim unlock and insert a single sim.
Sent from my XT1635-02 using XDA-Developers Legacy app
flashallthetime said:
You'll have to flash a dual sim firmware package but there's issues with flashing firmware that's not what originally was installed on your moto z play.
You could ultimately loose your IMEI , Which would render your phone useless.
It's just easier to sim unlock and insert a single sim.
Click to expand...
Click to collapse
I'm already sim unlocked (have the US unlocked version courtesy of republic). My intention is to only use whichever sim is in slot 1. I'll manually pull the tray and switch sim positions when I need to switch. I just want the second slot as dead storage space for the unused sim card. Just wondering if there's something physical in the guts of the single SIM version that could be damaged by or cause damage to the unused sim in slot 2 of the tray. Or if there's something physically different about the dual SIM tray that will not allow it to fit in the single SIM version of the device.
Definitely no flashing of dual SIM firmware happening on this device.
You should be fine. Just make sure that the active sim goes in the same slot as where it would go in the single-sim tray and the inactive sim go in the spare slot. It's a good way to not lose a sim card. I was thinking of doing this for my single-sim, carrier variant Moto x play, but never bothererd.
titaniumtux said:
You should be fine. Just make sure that the active sim goes in the same slot as where it would go in the single-sim tray and the inactive sim go in the spare slot. It's a good way to not lose a sim card. I was thinking of doing this for my single-sim, carrier variant Moto x play, but never bothererd.
Click to expand...
Click to collapse
Thanks. Avoiding losing a sim while on my trip is my primary reason for doing this. Guess I'll give it a shot!
Update:
Received dual Sim tray from China today (13 days order to door, $10 shipped on eBay)
Visually compared both, they seem basically identical, with the exception of some type of serial number sticker on the original single Sim tray.
Fit isn't quite perfect - the angle of the outer piece of the tray isn't quite right, so it's a tiny bit recessed into the edge of the phone on one end, and slightly raised on the other end. Enough to be visually noticed if you're looking for it, and can be felt running a finger nail over the seam between the edge of the phone and the Sim tray. Don't believe it's enough to present any "catch" issues if running naked, and a total non issue if using a case or bumper.
No apparent functional issues - device connects fine using Sim 1 slot in tray. Did not feel any unusual resistance when inserting tray with both Sims aboard. Obviously doesn't see the Sim in slot 2.
Nice to be able to carry both my Sims with me, worry free. Worth the money for my use case.