Develop Bugs

[Q] Help: impossible to start my HDH

My HTC DESIRE HD is looping on boot...
the only thing I can do, is to launch in fastboot mode...
My info about the phone:
ACE PVt SHIP S-ON RL
HBOOT-0.85.0018
MICROP-0438
RADIO-26.04.02.17_M2
eMMC-boot
Dec 7 2010,00:29:52
the usb debbuging is disabled and my phone wasn't root.
I have try many solution found on web but nothing works...
if anyone have a idea...
P.S: Sorry for my bad very bad english...

well, what kind solution found on web did you try? what version of stock did you have before thas issue?
have you tried to reinstall offcial RUU??

I try with adb but my htc still offline.
I try to run different RUU...signed but always error like Failed remote 42 custom id check fail..
I try many times to reset factory, etc...
the only way that work i with fastboot... i can see the device, run command like fastboot oem rebootRUU, but impossible to do more...
I search a command with fastboot to change the s-on to -off or for adb see my htc....

Your DHD is branded, and as such you will only be able to run a RUU for your particular network/carrier.
If you let us know what that network is we can find a suitable fix for you.

My phone is branded by swisscom (switzerland). i have tried some Ruu... but always an error appears....

With the command fastboot oem gencheckpt
I have this info:
... INFOsetup_tag addr=0xA0000100 cmdline add=0x8D08BCEC
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x26503
INFOTAG:hero panel = 0x0
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is not super CID
INFOCID is VODAP110
INFOsetting->cid::VODAP110
INFOserial number: HT0B8RX02111
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =473
INFOactive commandline: board_spade.disable_uart2=0 board_spade.
INFOusb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
INFOrd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=true androidboot.baseband=26.04.02.17_M2 androidboot.ci
INFOd=VODAP110 androidboot.batt_poweron=good_battery androidboot
INFO.carrier=VODA-Swisscom-DE androidboot.mid=PD9810000 androidb
INFOoot.keycaps=qwerty androidboot.mode=recovery androidboot.ser
INFOialno=HT0B8RX02111 androidboot.bootloader=0.85.0018 no_conso
INFOle_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOaARM_Partion[6].name=devlog
INFOaARM_Partion[7].name=pdata
INFOpartition number=8
INFOValid partition num=8
INFOjump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
INFOel_addr(0x4008000)
INFO-------------------hboot boot time:181615 msec
FAILED (status read failed (Too many links))
Voilà, thanks everybody for your help...

[solved] htc desire doesn't boot anymore,stay on htc logo... brick?

Hi!
I'm french so I'm sorry for my poor english.
Since one week I've a HTC desire which doesn't boot any more.
It stays on the htc logo with white screen.
I tried to go to the recovery but always this white screen.
So I tried to reinstall the recovery by fastboot using fastboot flash recovery recovery.img .
always the same error even with several different recoveries
>fastboot flash recovery recovery.img
sending 'recovery' (4182 KB)... OKAY [ 0.582s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.584s
Click to expand...
Click to collapse
I tried the PB99IMG_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed on the µSD ...
I tried RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe .... same problem.
Now,in the bootloader:
bravo pvt1 ship s-off
hboot 0.93.0001
touchpanel synw0101
radio 5.11.05.27
Click to expand...
Click to collapse
What do I have to do?
Here's a paste oh the fastboot oem boot
. INFOsetup_tag addr=0xA0000100 cmdline add=0x8E
07D944
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x21F04
INFOTAG:hero panel = 0x0
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is super CID
INFOCID is super CID
INFOBackup CID is empty
INFOsetting->cid::11111111
INFOserial number: SH07MPL01679
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =419
INFOactive commandline: board_bravo.disable_uart3=0 board_bravo.
INFOusb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
INFOrd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=false androidboot.baseband=4.06.00.02_2 androidboot.cid
INFO=11111111 androidboot.carrier=ALL androidboot.mid=PB992****
INFOandroidboot.keycaps=qwerty androidboot.mode=normal androidbo
INFOot.serialno=SH07MPL01679 androidboot.bootloader=0.80.0000 no
INFO_console_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOpartition number=6
INFOValid partition num=6
INFOjump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
INFOnel_addr(0x20008000)
INFO-------------------hboot boot time:774192 msec
FAILED (status read failed (Too many links))
finished. total time: 6.294s
Click to expand...
Click to collapse
Using the exe RUU it's again s-off.... that's strange,isn't it?

up.
do I have tu erase the recovery with fastboot in order to re flash it?
i've already viewed the Bortak's guide but nothing worked

I never need to erase anything before flash recovery.
You probably not S-OFF, try to boot into bootloader first by turn it on while holding back key, what do you see on that screen ?

so i've tried many things and.... it boots!
i've downgraded the alpharev hboot
then install recovery via fastboot
install hboot cm7
flash radio
and flash cm7 rom and wipe
thx to all the support provided by this forum!

how do you do that?

[Q] trouble with dz

hi im a noob and having trouble with my bell dz, any help would be greatly appreciated, its downgraded to 1.34 and i think i have gained root, but still s-on
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\ron>cd :c/platform-tools
The filename, directory name, or volume label syntax is incorrect.
C:\Users\ron>cd c:/platform-tools
c:\platform-tools>adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
c:\platform-tools>fastboot oem boot
... INFOsetup_tag addr=0xA0000100 cmdline add=0x8D085C50
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x25203
INFOTAG:hero panel = 0xF
INFOTAG:engineerid = 0x4
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is not super CID
INFOCID is BM___001
INFOsetting->cid::BM___001
INFOserial number: HT0ARRV02723
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =461
INFOactive commandline: board_vision.disable_uart2=0 board_visio
INFOn.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
INFOboard_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
INFOot.emmc=true androidboot.baseband=26.03.02.18_M3 androidboo
INFOt.cid=BM___001 androidboot.batt_poweron=good_battery android
INFOboot.carrier=BM androidboot.mid=PC1012000 androidboot.keycap
INFOs=qwerty androidboot.mode=normal androidboot.serialno=HT0ARR
INFOV02723 androidboot.bootloader=0.85.0005 no_console_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOaARM_Partion[6].name=devlog
INFOaARM_Partion[7].name=pdata
INFOpartition number=8
INFOValid partition num=8
INFOjump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
INFOel_addr(0x4008000)
INFO-------------------hboot boot time:11343 msec
FAILED (status read failed (Too many links))
c:\platform-tools>
any ideas?

http://forum.xda-developers.com/wiki/HTC_Vision
did you follow this?

no i originaly unlocked the boot loader at htcdev then relocked it and followed strawmetals guide. I should have asked for help a while ago, im pretty sure i have messed it right up

is there a way to undo things and start fresh?

You can flash an RUU to return it to complete stock. You can find the RUU's at http://www.shipped-roms.com/index.php?category=android&model=Vision
You'll most probably need a goldcard though
-Nipqer

ok can i flash an earlier rom? or would it be best to go back to gingerbread
?

if you managed to run misc_version properly, you can flash an earlier rom. Otherwise you'll have to go for the gingerbread one (2.42 I think)
-Nipqer

i have tried to flash my stockrom a several times, but i keep getting a signature 12 verify fail, i dont think my gc is right, when i downgraded i flashed the wrong rom RUU_Vision_hTC_Asia_WWE_1.34.707.3_Radio_12.28b.60.140e_26.03.02.18 could this be why? also i think i used a g2 hboot, i am lost as to how to fix these issues

if someone could point me in the right direction it would be greatly appreciated

[Q] Struck in Ruu mode

Hi guys
I got a big problem and im in way over my head so i really hope someone can help me
I tried the search and found many treads to use but non with sucess
The phone is S-ON
About a week i tried to fix my fathers phone because it was on boot-loop
in lack of better knowles i tried til unlock the bootlocker via htvdev, it told me to update the hboot and it instant went on OOW-locked after that..
Tried to update it again but then got a 191 error rom version not supported
Then i tried to Ruu it with a goldcard and a shipped rom ( RUU_Ace_Gingerbread_S_HTC_WWE_2.50.405.2) but i diddent work, showed error 140 wrong bootloader version...
I then tried to flash a newer rom ( RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1) which failed on Radio v2 ( PU-fail as i remember) got a error 152 image error wrong ruu and then it got stuck in RUU mode/ black screen with 4 /!\
I tried to fastboot flash diffrent PD98img's but they fail
I also tried to flash a t-mobile branded rom (shipped with that when new) diddent work
Also tried to but .zip on card.. no luck either
Also tried Ace hack thing but dont work as i cant adb push
-------------------
I cant get_indentifier_token (to unlock bootloader)
I cant Adb (as i cant turn on the phone for ativating debugging)
I cant boot in to bootloader or recovery (as the phone is stuck in RUU)
-----------
I can fastboot via cmd
I can Ruu from PC
I have all drivers installed
Goldcard is inserted
Code:
ACE PVT SHIP S-ON RL
HBOOT-2.00.00.27
MICROP-0438
RADIO-26.09.04.11.m2
eMMC-boot
Sep 7 2011,19:06:24
RUU (highlighted)
Code:
E:\root>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.09.04.11_M2
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 2.52.0.0
INFOserialno: HT11BRX09090
INFOimei: -removed-
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: T-MOB101
INFObattery-status: good
INFObattery-voltage: 4204mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: RUU
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
finished. total time: 0.016s
Code:
E:\root>fastboot reboot oem boot
... INFOsetup_tag addr=0xC0000100 cmdline add=0x8D
08C9AC
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x26503
INFOTAG:hero panel = 0x1
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is not super CID
INFOCID is T-MOB101
INFOsetting->cid::T-MOB101
INFOserial number: HT11BRX09090
INFOcommandline from head: no_console_suspend=1 wire.search_coun
INFOt=5
INFOcommand line length =510
INFOactive commandline: board_spade.disable_uart2=0 board_spade.
INFOusb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
INFOrd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=true androidboot.baseband=26.09.04.11_M2 androidboot.ci
INFOd=T-MOB101 androidboot.batt_poweron=good_battery androidboot
INFO.carrier=TMD androidboot.mid=PD9810000 androidboot.keycaps=q
INFOwertz androidboot.mode=normal androidboot.serialno=HT11BRX09
INFO090 androidboot.bootloader=2.00.0027 zygote_oneshot=off kmem
INFOleak=off no_console_suspend=1 wire.search_count=5
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=local
INFOaARM_Partion[5].name=cache
INFOaARM_Partion[6].name=userdata
INFOaARM_Partion[7].name=devlog
INFOaARM_Partion[8].name=pdata
INFOaARM_Partion[9].name=lib
INFOpartition number=10
INFOValid partition num=10
INFOjump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
INFOel_addr(0x4008000)
INFO-------------------hboot boot time:597262 msec
FAILED (status read failed (Unknown error))
finished. total time: 21.031s
Dont hesitate to ask me for further info if you need it..
ANY help will be greatly apriciated as im stuck right now..

Any one?? i keep reading that Radio fail = Bricked, but also that is you can reach th e phone via fastboot you can still save it?
Is my dads phone dead?

bump

braarup said:
bump
Click to expand...
Click to collapse
First, stop trying anything at arm length or will definitely brick the phone. You need to have a locked bootloader to flash a RUU. If you are still S-ON then you will need to use the official RUU and no other one.
Once you have the RUU, rename it PD98IMG.zip, put it in the root of the sdcard and then boot in hboot...let it parse the file and when prompted to update just choose yes.
If the phone is S-ON not rooted and S-OFF there's no reason for it to go on a bootloop. Maybe some hardware issue.

Sd card issue... any solutions?

Hi
Is there any solution for the sd issue in the desire? I cannot access in anyway to it, but it worked yesterday... but now i cannot flash roms or anything as my phone does not detect any sd....
help please!
Thanks

Search for USB brick. Or check the link on my sig for possible solution

I will try to do everything I can during this weekend...
I am thinking in using a contact cleaner spray as well... is it a good idea?
Cheers!

Not luck at all... i have tried everything... Probably is a hardward thing? but it looks like in perfect conditions...
This is what i get when i do a "fasboot oem boot" just in case you know any solution...
... INFOsetup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x21F04
INFOTAG:hero panel = 0x0
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is super CID
INFOCID is super CID
INFOBackup CID is VODAP001
INFOsetting->cid::VODAP001
INFOserial number: HT04KPL10473
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =421
INFOactive commandline: board_bravo.disable_uart3=0 board_bravo.
INFOusb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
INFOrd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=false androidboot.baseband=5.11.05.27 androidboot.cid=V
INFOODAP001 androidboot.carrier=VODA-UK androidboot.mid=PB992000
INFO0 androidboot.keycaps=qwerty androidboot.mode=normal android
INFOboot.serialno=HT04KPL10473 androidboot.bootloader=6.93.1002
INFOno_console_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOpartition number=6
INFOValid partition num=6
INFOjump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
INFOnel_addr(0x20008000)
INFO-------------------hboot boot time:32606 msec
FAILED (status read failed (Too many links))
thanks a lot!!!

I am able to install any carrier in the mobile... for example Tmobile... I have a goldcard... does it mean that the goldcard is working? Or it is just because I have s'off?

Sergiales said:
I am able to install any carrier in the mobile... for example Tmobile... I have a goldcard... does it mean that the goldcard is working? Or it is just because I have s'off?
Click to expand...
Click to collapse
try another sd-card. Maybe the one you are trying is broken...

Plex82 said:
try another sd-card. Maybe the one you are trying is broken...
Click to expand...
Click to collapse
I am using a new SD and the same. The behaivour is really weird... For example... I leave the phone with the battery and sd card off for a day, plug it the sd and the battery, power on and sd is detected. It works for an hour or two and suddenly the Wifi and sd card stop working... Then i manage to make the wifi works but not the SD... really really weird... not sure if is software or hardware failure...
thanks anyway!