Related
My HTC DESIRE HD is looping on boot...
the only thing I can do, is to launch in fastboot mode...
My info about the phone:
ACE PVt SHIP S-ON RL
HBOOT-0.85.0018
MICROP-0438
RADIO-26.04.02.17_M2
eMMC-boot
Dec 7 2010,00:29:52
the usb debbuging is disabled and my phone wasn't root.
I have try many solution found on web but nothing works...
if anyone have a idea...
P.S: Sorry for my bad very bad english...
well, what kind solution found on web did you try? what version of stock did you have before thas issue?
have you tried to reinstall offcial RUU??
I try with adb but my htc still offline.
I try to run different RUU...signed but always error like Failed remote 42 custom id check fail..
I try many times to reset factory, etc...
the only way that work i with fastboot... i can see the device, run command like fastboot oem rebootRUU, but impossible to do more...
I search a command with fastboot to change the s-on to -off or for adb see my htc....
Your DHD is branded, and as such you will only be able to run a RUU for your particular network/carrier.
If you let us know what that network is we can find a suitable fix for you.
My phone is branded by swisscom (switzerland). i have tried some Ruu... but always an error appears....
With the command fastboot oem gencheckpt
I have this info:
... INFOsetup_tag addr=0xA0000100 cmdline add=0x8D08BCEC
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x26503
INFOTAG:hero panel = 0x0
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is not super CID
INFOCID is VODAP110
INFOsetting->cid::VODAP110
INFOserial number: HT0B8RX02111
INFOcommandline from head: no_console_suspend=1
INFOcommand line length =473
INFOactive commandline: board_spade.disable_uart2=0 board_spade.
INFOusb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
INFOrd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=true androidboot.baseband=26.04.02.17_M2 androidboot.ci
INFOd=VODAP110 androidboot.batt_poweron=good_battery androidboot
INFO.carrier=VODA-Swisscom-DE androidboot.mid=PD9810000 androidb
INFOoot.keycaps=qwerty androidboot.mode=recovery androidboot.ser
INFOialno=HT0B8RX02111 androidboot.bootloader=0.85.0018 no_conso
INFOle_suspend=1
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=cache
INFOaARM_Partion[5].name=userdata
INFOaARM_Partion[6].name=devlog
INFOaARM_Partion[7].name=pdata
INFOpartition number=8
INFOValid partition num=8
INFOjump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
INFOel_addr(0x4008000)
INFO-------------------hboot boot time:181615 msec
FAILED (status read failed (Too many links))
Voilà, thanks everybody for your help...
After flashing RUU fails with
Hi,
I'm just trying to get my Desire back to stock so I can sell it but the RUU that I have used in the past has failed. I've run the downgrader and flashed the stock ROM from Alpharev but now when I try to re-apply the RUU I get the black HTC screen with 4 warning triangles in the corners of the screen. If remove the USB an dreconnect then I get this....
---Alpharev----
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
RUU
1 Bootloader - Bypassed
2 Radio V2 - FAIL-PU
3 RADIO CUST - OK
4 BOOT - OK
5 RECOVERY - OK
6 SYSTEM - OK
7 USERDATA - OK
8 SPLASH1 - OK
9 SPLASH2 - OK
Partition update fail!
Update fail!
If I run fastboot oem boot then I get this...
C:\AndroidSDK\tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x26A0D
(bootloader) TAG:hero panel = 0x3
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is ORANG001
(bootloader) setting->cid::ORANG001
(bootloader) serial number: SH09DPL01345
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =423
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=O
(bootloader) RANG001 androidboot.carrier=ORANGE-UK androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=SH09DPL01345 androidboot.bootloader=6.93.100
(bootloader) 2 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:423443 msec
FAILED (status read failed (Too many links))
finished. total time: 99.905s
I've got a gold card in. I'm not sure if I'm missing a partition or if my goldcard needs recreating. Oh, and I have tried various RUU's but no luck with any of them.
Does anyone have any ideas? Let me know if you need any more info.
Many thanks,
Baz
Did you flashed Stock Hboot partition table before downgrader?
I did bravo_downgrade.img followed by bravo_alphaspl.img and then the RUU.
Is there another one I have to do?
have you tried to run the RUU again while on the four-triangle-screen? that solved it for me.
Sent from my HTC Desire using xda premium
Don't open two threads about the same problem.
SwiftKeyed from CyanogenMod with Transparent XDA App
@Tillus - I had tried re-running the RUU but with no luck. I've also tried various other RUU's but can't get anything.
@MatDrOiD - Sorry, I think that's a forum screw-up because I was safely tucked up in bed at 12:48am. In response to your post on the other thread, I have flashed bravo_downgrade.img As far s I know that's the hboot downgrader, no?
Looks like a radio brick to me. You can try a,few things but you may end up contacting HTC
Sent from my HTC Desire using XDA App
I did bravo_downgrade.img followed by bravo_alphaspl.img and then the RUU.
Is there another one I have to do?
Click to expand...
Click to collapse
Why did you flash the stock after the downgrader?
First Flash the stock, then the downgrader.
That's why the bootloader is bypassed and radio can not be updated.
Exactly.
First you have to flash the partition table image, and then run the downgrader... if you do it backwards results might be unpredictable.
You do not have to flash stock, downgrader is enough. After downgrader run RUU and it will succeed.
Thanks Dave, I'll give that a go as soon as I've had a cup of tea. I did things that way round because I had an issue once before and someone said that was the way to fix it and it worked so this time I just did the same again. I'll get back to you and let you know how things went.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
OK, I flashed stock followed by the downgrader and then ran the RUU. My fault has changed to something that strikes me as being rather more serious. I have a feeling I was lead to the wrong RUU (RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704) as after I ran this my screen went off and hasn't come back on at all so I'm thinking this might be a RUU for the led version of the Desire. Also I no longer have Super CID which seems to be preventing me from doing any further flashing. I'm just looking into reflashing misc to see if that might help.
Current problems: No Super CID, No display, only boots into fastboot.
...oh bugger :-/
RockyGothyBaz said:
OK, I flashed stock followed by the downgrader and then ran the RUU. My fault has changed to something that strikes me as being rather more serious. I have a feeling I was lead to the wrong RUU (RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704) as after I ran this my screen went off and hasn't come back on at all so I'm thinking this might be a RUU for the led version of the Desire. Also I no longer have Super CID which seems to be preventing me from doing any further flashing. I'm just looking into reflashing misc to see if that might help.
Current problems: No Super CID, No display, only boots into fastboot.
...oh bugger :-/
Click to expand...
Click to collapse
why if you have dozen of ruu available, newbie always choice the damn old one??? U have to choice the damn last one! What wrong with the latest? How you can flash a such old ruu?
The next time, ask a confirmation before flash an ruu.
RockyGothyBaz said:
Current problems: No Super CID, No display, only boots into fastboot.
...oh bugger :-/
Click to expand...
Click to collapse
IF it boots into fastboot, you can flash a newer RUU, try the latest one, not one of the oldest
Hey guys,
I've also got a device from a mate who completely screwed it up. I also tried to flash the latest RUU but it failed.
My understanding is that with the device blocked at the HTC with 4 triangles boot, my only option is to use a Goldcard because of S-ON.
However my understanding is that to create a Goldcard you need to do this from your device whilst its working. Is it possible to create a goldcard without the device?
Thanks.
makcrellon said:
Hey guys,
I've also got a device from a mate who completely screwed it up. I also tried to flash the latest RUU but it failed.
My understanding is that with the device blocked at the HTC with 4 triangles boot, my only option is to use a Goldcard because of S-ON.
However my understanding is that to create a Goldcard you need to do this from your device whilst its working. Is it possible to create a goldcard without the device?
Thanks.
Click to expand...
Click to collapse
Read my thread.
hello, this desire is kicking my ass, 4 days not fixed? of trying and searching, can some one please help
was on orange,uk,htc branded dont know if was orange branded
tried several roms some they give error or just gets to black htc screen (waited) 30 min nothing
reboot loop after s-off ?
can flash this from gold card, shipped-roms.com/download.php?category=android&model=Bravo&file=OTA_Bravo_Froyrange_CH_2.22.71.4-2.22.71.2_releasevrnkzrd85wxshyvx.zip
but then just reboots continously
here is info i have
READING INFO: OK!
10:50:33 > MODEL: BRAVO / bravo
10:50:33 > VERSION: 0.5/None/0.93.0001
10:50:33 > FIRMWARE: 2.29.405.2/5.11.05.27
10:50:33 > HARDWARE: HBOOT-8x50
10:50:33 > HTC DESIRE READ INFO: END!
-----------------------------------------------------------------
C:\Users\POWERTECH 6000\AppData\Local\Android\android-sdk\platform-tools>fastboo
t oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::11111111
(bootloader) serial number: HT03PPL06282
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =417
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=1
(bootloader) 1111111 androidboot.carrier=ALL androidboot.mid=PB992**** an
(bootloader) droidboot.keycaps=qwerty androidboot.mode=normal androidboot
(bootloader) .serialno=HT03PPL06282 androidboot.bootloader=0.93.0001 no_c
(bootloader) onsole_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:56610 msec
FAILED (status read failed (Too many links))
finished. total time: 6.879s
which ruu can i use just want to factory or get going in anyway i also noticed bottom end of phone gets really warm sometimes ?
thanks
kammy6000 said:
hello, this desire is kicking my ass, 4 days not fixed? of trying and searching, can some one please help
was on orange,uk,htc branded dont know if was orange branded
tried several roms some they give error or just gets to black htc screen (waited) 30 min nothing
reboot loop after s-off ?
can flash this from gold card, shipped-roms.com/download.php?category=android&model=Bravo&file=OTA_Bravo_Froyrange_CH_2.22.71.4-2.22.71.2_releasevrnkzrd85wxshyvx.zip
but then just reboots continously
here is info i have
READING INFO: OK!
10:50:33 > MODEL: BRAVO / bravo
10:50:33 > VERSION: 0.5/None/0.93.0001
10:50:33 > FIRMWARE: 2.29.405.2/5.11.05.27
10:50:33 > HARDWARE: HBOOT-8x50
10:50:33 > HTC DESIRE READ INFO: END!
-----------------------------------------------------------------
C:\Users\POWERTECH 6000\AppData\Local\Android\android-sdk\platform-tools>fastboo
t oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::11111111
(bootloader) serial number: HT03PPL06282
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =417
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=1
(bootloader) 1111111 androidboot.carrier=ALL androidboot.mid=PB992**** an
(bootloader) droidboot.keycaps=qwerty androidboot.mode=normal androidboot
(bootloader) .serialno=HT03PPL06282 androidboot.bootloader=0.93.0001 no_c
(bootloader) onsole_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:56610 msec
FAILED (status read failed (Too many links))
finished. total time: 6.879s
which ruu can i use just want to factory or get going in anyway i also noticed bottom end of phone gets really warm sometimes ?
thanks
Click to expand...
Click to collapse
2.3 RUU.
desire
nlooooo said:
2.3 RUU.
Click to expand...
Click to collapse
hi thanks for help , i get error 155 ,please use correct update?
i am putting in fastboot to bypass battery low error!
is this incorrect?
i have s-off
hboot 0.93.001
thanks
kammy6000 said:
hi thanks for help , i get error 155 ,please use correct update?
i am putting in fastboot to bypass battery low error!
is this incorrect?
i have s-off
hboot 0.93.001
thanks
Click to expand...
Click to collapse
You cannot ruu while s-off is there. Make it S-ON and try aggain, but before making s-on flash a custom recovery. Just to be safe
desire
race55 said:
You cannot ruu while s-off is there. Make it S-ON and try aggain, but before making s-on flash a custom recovery. Just to be safe
Click to expand...
Click to collapse
thank you for telling me s must be on that why not work!
i tried to put recovery image bravo from clockwork from fastboot but no work cos i dont have eng boot i think,android flasher need eng boot aswell and i am not rooted
can you please tell me how to put s-off again please so i just factory
thanks
I'm not sure what are you talking about, what custom recovery before you do s-on?
The proper way to do that is to flash downgrade hboot from alpharev via fastboot and then run ruu.
Sent from my HTC Desire using Flashes and Thunders
desire
nlooooo said:
I'm not sure what are you talking about, what custom recovery before you do s-on?
The proper way to do that is to flash downgrade hboot from alpharev via fastboot and then run ruu.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
ok sorry, phone was unlocked/ s off by, xtc clip
so no recovery installed!
i tried to write the image from alpharev website with fastboot commands i get starting recovery, then remote not allowed
C:\Users\ kammy\AppData\Local\Android\android-sdk\platform-tools>fastboo
t flash recovery bravo.img.img
sending 'recovery' (3256 KB)...
OKAY [ 0.485s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.502s
C:\Users\kammy\AppData\Local\Android\android-sdk\platform-tools>^A
how can i write the new img please, i am not very good with htc
thanks
kammy6000 said:
ok sorry, phone was unlocked/ s off by, xtc clip
so no recovery installed!
i tried to write the image from alpharev website with fastboot commands i get starting recovery, then remote not allowed
C:\Users\ kammy\AppData\Local\Android\android-sdk\platform-tools>fastboo
t flash recovery bravo.img.img
sending 'recovery' (3256 KB)...
OKAY [ 0.485s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.502s
C:\Users\kammy\AppData\Local\Android\android-sdk\platform-tools>^A
how can i write the new img please, i am not very good with htc
thanks
Click to expand...
Click to collapse
nlooooo ment flash Alpharev downgrader.img then run 2.3 ruu
Sent from my HTC Desire
desire
jmcclue said:
nlooooo ment flash Alpharev downgrader.img then run 2.3 ruu
Sent from my HTC Desire
Click to expand...
Click to collapse
can you tell me how to do that i thought it was through the run fastboot commands (i get errors) is there another way from sd card or something
or is there a exe file? sorry for noob q's
ok do i burn the alpharev iso to disk then boot from it then install new img to phone from the program?
thanks
As I understood you got s-off via htc site?
Then you don't have access to radio and hboot partitions only to recovery, system and data so it's not allowed to flash hboot via fastboot.
You can flash recovery from here:
http://www.clockworkmod.com/rommanager/
download proper recovery.img and flash it via fastboot. You have to type the path correctly to the space where you stored it, ie:
fastboot flash recovery c:\recovery.img
Then go here:
http://forum.xda-developers.com/showthread.php?t=809328
find and flash a rom of your choice. These are custom roms and are flashable from recovery (install zip from sd card command).
desire
nlooooo said:
As I understood you got s-off via htc site?
Then you don't have access to radio and hboot partitions only to recovery, system and data so it's not allowed to flash hboot via fastboot.
You can flash recovery from here:
http://www.clockworkmod.com/rommanager/
download proper recovery.img and flash it via fastboot. You have to type the path correctly to the space where you stored it, ie:
fastboot flash recovery c:\recovery.img
Then go here:
http://forum.xda-developers.com/showthread.php?t=809328
find and flash a rom of your choice. These are custom roms and are flashable from recovery (install zip from sd card command).
Click to expand...
Click to collapse
ok thats straight forward, and i followed it but why does it keep saying ,remote not allowed failed!
i have phone in usb displaying fastboot usb is highlighted!
users\kammy\appdata\local\android\android-sdk\platform-tools\fastboot
i dont get it,why the error
thanks very much
I didn't know what's xtc clip, now I found out and I'm sure that something failed in that process cause have s-off on your device but you actually don't have it cause you can't run fastboot commands. Sorry...
desire
nlooooo said:
I didn't know what's xtc clip, now I found out and I'm sure that something failed in that process cause have s-off on your device but you actually don't have it cause you can't run fastboot commands. Sorry...
Click to expand...
Click to collapse
ok thanks everyone for help, but i will be back with results
kammy6000 said:
ok thanks everyone for help, but i will be back with results
Click to expand...
Click to collapse
ok so now i have recovery clockwork installed i think ,i am able to install a custom rom , cyanogen , then it just crashes at the
load screen the screen goes all fuzzy or it looks like its loading but not going through the whole process
is this lcd,amoled issue?
or something else i am really close but what is stopping it loading
thanks
kammy6000 said:
ok so now i have recovery clockwork installed i think ,i am able to install a custom rom , cyanogen , then it just crashes at the
load screen the screen goes all fuzzy or it looks like its loading but not going through the whole process
is this lcd,amoled issue?
or something else i am really close but what is stopping it loading
thanks
Click to expand...
Click to collapse
ok now i have alpharev hboot cm7, but all roms just crash is there specific roms only please help me
kammy6000 said:
ok now i have alpharev hboot cm7, but all roms just crash is there specific roms only please help me
Click to expand...
Click to collapse
Here you go, just search the thread, for every rom it is written if it's cm7 hboot compatible.
http://forum.xda-developers.com/showthread.php?t=809328
My daughter gave me her HTC Desire & told me she thought 'something wasn't right' with it
The handset is locked to Three, & as far as I know was running fine until this problem.
Apparently, she had 'just deleted some apps' & it sounds like somehow it ended up in a boot loop. She passed it to a 'friend' who 'knows about phones & stuff' & now it goes to a black screen with a triangle in each corner at switch on. She says she thinks her 'friend' tried to reinstall Android, but I'm guessing it didn't go to plan I've had a trawl through google, & the only thing I've found which gives me any sort of output is
C:\Android>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x26A12
(bootloader) TAG:hero panel = 0x3
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is H3G__001
(bootloader) setting->cid::H3G__001
(bootloader) serial number: SH0BAPL06571
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =420
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.14 androidboot.cid=H
(bootloader) 3G__001 androidboot.carrier=COMMON androidboot.mid=PB9920000
(bootloader) androidboot.keycaps=qwerty androidboot.mode=normal androidb
(bootloader) oot.serialno=SH0BAPL06571 androidboot.bootloader=6.93.1002 n
(bootloader) o_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:576595 msec
FAILED (status read failed (Too many links))
finished. total time: 6.727s
Click to expand...
Click to collapse
Any help greatly appreciated.
check bortaks troubleshooting guide in my sig, answers for u problem is there
Sent from my HTC Desire
problems
3c3adu said:
problems
Click to expand...
Click to collapse
wtf?
jmcclue said:
check bortaks troubleshooting guide in my sig, answers for u problem is there
Sent from my HTC Desire
Click to expand...
Click to collapse
Thanks for the reply jmcclue. I had a good read through all the links in your sig.
I'm not sure exactly what you were suggesting may be the solution to the problem, but I tried extracting rom.zip from RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed.exe, renaming it to PB99IMG.zip & then tried updating via fastboot, but I got the following
C:\Android>fastboot update PB99IMG.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
error: failed to access zipdata in '╣ü┼02ıa6åfïlAþQ=┘qµ┘mìl♣2
çn►5╗ÿM█l(M,ÐøXó7▒Do÷XuþÜ¢¿IG♦ÃB¯òÇ[Öù☺Rò░wNy/Ó▓└⌂↔úÐKá↔■Ä▒8þo├¬ÊAÈXö7iF ê┌'³EQ^Ó/¸¼ðï0║å║Î☺ÞP×WWôìªçB
ƒþf╚û©ÜÞàõ»åÞ_‗*‗↓ȯ┘µÇU*+¥!Ûe↑q(ä⌂╬¾┴PyÁ3ML¨═◄R:
àı├XЦ▼N'
Click to expand...
Click to collapse
Is this what you where suggesting I do? If so, what have I done wrong?
Just download and run 2.3 ruu.
Sent from my HTC Desire using Flashes and Thunders
dreamonn said:
androidboot.bootloader=6.93.1002
Click to expand...
Click to collapse
Thats a alpharev hboot. You will have to downgrade hboot first before running 2.3 RUU. Only run 2.3 RUU.
Chapter 4 of Bortaks troubleshooting thread is relevant for you. Before the RUU do downgrade hboot. Its in my signature.Go there
handy5876 said:
Thats a alpharev hboot. You will have to downgrade hboot first before running 2.3 RUU. Only run 2.3 RUU.
Chapter 4 of Bortaks troubleshooting thread is relevant for you. Before the RUU do downgrade hboot. Its in my signature.Go there
Click to expand...
Click to collapse
Thanks handy5876
If I pull the usb lead after I hear the phone connect, it goes from the black screen with a triangle in each corner to what looks like a fastboot screen with the following info
Code:
AlphaRev Unlock
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.9999
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.14
Aug 10 2010, 17:52:18
RUU
I had a read through [4] of Bortaks guide. As you said to downgrade hboot I downloaded the bravo_downgrade.img from AlphaRev & also Android Flasher 2.2.0.5. When I run Android flasher with the phone showing the black screen with triangles, I click the 'Bootloader' button & browse to the bravo_downgrade.img, but when I click 'Flash' I get an error that says
Code:
error: device not found
& a pop up window which says
Code:
Error, your phone is not plugged in or drivers aren't installed
. If I check the 'I'm already in fastboot' box & repeat the above, Android Flasher just says 'Please wait while your phone is flashed.' but nothing happens.
I can issue a
Code:
fastboot oem boot
from a command window & get a response from the phone so I'm guessing there are drivers installed, & the fact that it replies to a fastboot command means I'm in fastboot so I'm a little confused.
Any ideas what I'm doing wrong?
Run 2.3 ruu from bootloader/fastboot.
Sent from my HTC Desire using Flashes and Thunders
dreamonn said:
Code:
AlphaRev Unlock
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.9999
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.14
Aug 10 2010, 17:52:18
RUU
Click to expand...
Click to collapse
Do as nlooooo says. Your bootloader is saying Alpharev Unlock. That means it has been downgraded and safe to run the 2.3 RUU.
nlooooo said:
Run 2.3 ruu from bootloader/fastboot.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
Hi nlooooo
Can you just confirm what you mean - do you mean to run the ruu.exe or push the ruu from fastboot? If you mean to push the ruu from fastboot, what commands do I issue?
Just run it from PC, you can do that with phone in both bootloader or fastboot.
Sent from my HTC Desire using Flashes and Thunders
Success!!
Successfully flashed & now back up & running.
Thanks for all you help
:thumbup:
Sent from my HTC Desire using Flashes and Thunders
nj!
I have Desire HD and microsd slot is not working and also low signal when SIM card inserted. I've followed some guides here but some have dead links.
Whenever I try to flash it with RUU it hangs on 'signature checking......'
The phone boots up to Android version 2.3.5 HTC sense 3.0 software 3.12.405.1 kernel 2.6.35.10-g931a37e htc [email protected] #1 baseband
12.65.60.29U_26.14.04.28_M build 3.12.405.1 CL199157 release-keys
Phone says "SD card blank or has unsupported filesystem" and when I click on this message it says format? and then says ... "SD card was removed before being unmounted". The microsd card works fine in other phones.
I've tried htcdev to unlock and I have the Unlock_code.bin for my phone, I have flashed it to the phone but the phone stays on the HTC grey logo screen and doesn't ask if I want to unlock?
Press Volume Down
*****LOCKED (OOW) ***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011, 14:28:19
On this screen it seems to freeze? as I can't choose fastboot, recovery, factory reset I have to pull the battery out.
fastboot oem boot
... INFOsetup_tag addr=0xC0000100 cmdline add=0x8D
0985F8
INFOTAG:Ramdisk OK
INFOTAG:smi ok, size = 0
INFOTAG:hwid 0x0
INFOTAG:skuid 0x26503
INFOTAG:hero panel = 0x0
INFOTAG:engineerid = 0x0
INFOMCP dual-die
INFOMCP dual-die
INFOTAG:mono-die = 0x0
INFODevice CID is not super CID
INFOCID is HTC__001
INFOsetting->cid::HTC__001
INFOserial number: HT0B6RX10792
INFOcommandline from head: no_console_suspend=1 wire.search_coun
INFOt=5
INFOcommand line length =513
INFOactive commandline: board_spade.disable_uart2=0 board_spade.
INFOusb_h2w_sw=0 board_spade.disable_sdcard=0 diag.enabled=0 boa
INFOrd_spade.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
INFOmmc=true androidboot.baseband=26.14.04.28_M androidboot.cid
INFO=HTC__001 androidboot.batt_poweron=good_battery androidboot.
INFOcarrier=HTC-WWE androidboot.mid=PD9810000 androidboot.keycap
INFOs=qwerty androidboot.mode=normal androidboot.serialno=HT0B6R
INFOX10692 androidboot.bootloader=2.00.0029 zygote_oneshot=off k
INFOmemleak=off no_console_suspend=1 wire.search_count=5
INFOaARM_Partion[0].name=misc
INFOaARM_Partion[1].name=recovery
INFOaARM_Partion[2].name=boot
INFOaARM_Partion[3].name=system
INFOaARM_Partion[4].name=local
INFOaARM_Partion[5].name=cache
INFOaARM_Partion[6].name=userdata
INFOaARM_Partion[7].name=devlog
INFOaARM_Partion[8].name=pdata
INFOaARM_Partion[9].name=lib
INFOpartition number=10
INFOValid partition num=10
INFOjump_to_kernel: machine_id(2844), tags_addr(0x4000100), kern
INFOel_addr(0x4008000)
INFO-------------------hboot boot time:14689 msec
FAILED (status read failed (Too many links))
finished. total time: 9.079s