Hi folks.
I just installed the KitKat 4.4.2 (CyanogenMod 11.0) 20140116 from Novafusion on my GIO S5660.
Now I see "Cryanogenmod" in the lower display and a rotating arrow around a symbol for hours.
Is that normal or did something go wrong.
I had the mobile rooted and px-cwm-v2 installed, cleared cache and dalvik prior to ROM installation.
Installation was done via px-cwm-v2 in recovery mode.
Any suggestion appreciated.
You need to use the latest CWM for KitKat.
I use this http://forum.xda-developers.com/sho...dvanced Edition / PhilZ Touch Recovery 6.40.1
You will have to flash back to stock and root, because to install PhilZ you need to do it through Terminal Emulator. You could also try the latest MMB CWM which can be flashed through CWM (but I'm bit sure if it will flash KitKat properly).
Sent from my GT-5660 using XDA Free mobile app
For recent cm11 roms released in Aug 2014, you need to use CWM 6.0.5.3 to install them.
Read more if you what to know more.
Thanks guys!!!
Unfortunately the PhilZ Touch Recovery 6.40.1 didn't work for me as for some reason Odin got stuck setting up connection.
I assume that access to SD wasn't possible.
But the 6.0.5.3 was installable from SD in recovery.
With that "new" recovery I was able to install the Novafusion Kitkat and now everything is running fine.
Thanks for your valueable support!
working
i just trying install cm11 august releases with twrp 2.7.0.0, not work...then i install cwm 6.0.5.3 and latest cm11 august releases installs correctly...nice work at all
Related
I have 5.0.2.7 cwm, and if i install cm 10.1 or 10.2 it bootloops, i also installed UVMC6 radio for those roms. Issue is that i cant install other recovery when i try to install it says aborted, or using odin its just dont send error. any help fast?
you CWM is outdated bro and stick to 4.2.2 ROMs the newest 4.3 has issues for the moment, GRAB TWRP from here http://teamw.in/project/twrp2/101 load it up through odin and flash that........ your CWM does not flash these newer ROMs, if you want to stay on CWM then you have to upgrade it to a newer recovery ??? what else are you stuck on bro
Fulfen said:
I have 5.0.2.7 cwm, and if i install cm 10.1 or 10.2 it bootloops, i also installed UVMC6 radio for those roms. Issue is that i cant install other recovery when i try to install it says aborted, or using odin its just dont send error. any help fast?
Click to expand...
Click to collapse
U need to get on newest twrp, I been on 2.6 and currently run a 4.3 and have flashed everyone that's been built, no issues at all
Sent from my SAMSUNG-SGH-T989 using xda premium
I would try TWRP too. Just download the goo manager app, and flash TWRP. It should be easy.
(I've been flashing quite a lot ... but unfamiliar with this device)
A friend asks me to help to move from with his Stock v2.3.6 to a customed 4.3 (since 4.4.x isn't 100% yet...).
So I got a Recovery on it and flashed latest superSU1.86 (is it compatible ???) to get root.
Afterward I can't flash some 4.3 ROMs (CM10.2, Slimbean4.3), all "aborted" in many recoveries (CWM 6.0.4.4, 6.0.3.7 & TWRP 2.6.3.0, 2.6.1.0).
I did all the wipes/factory-reset/systems/data ... Finally I just restore the Stock-backup so he can still use the phone for now.
At least, it's still rooted with a TWRP on it.
What did I do wrong ?
Thanks.
Update: flashed stock 4.1.2 then went to Slim4.3 without issue with TWRP 2.6.1.0
I am having a problem installing clockwork recovery from odin
i have already rooted my galaxy grand.
i installed a rom based on cm 10.1 and have been using it since a long time
now i wish to install new kitkat roms but it requires a new version of recovery.
so when i tried to install phill "philz_touch_6.12.8-i9082" from odin in download mode the installation dosen't begins at all
after that i tried many times installing other recoveries from the existing threads...but i failed
later my old clockwork recovery also stopped working and now i cant boot into it at all
please he me...
maxx007 said:
I am having a problem installing clockwork recovery from odin
i have already rooted my galaxy grand.
i installed a rom based on cm 10.1 and have been using it since a long time
now i wish to install new kitkat roms but it requires a new version of recovery.
so when i tried to install phill "philz_touch_6.12.8-i9082" from odin in download mode the installation dosen't begins at all
after that i tried many times installing other recoveries from the existing threads...but i failed
later my old clockwork recovery also stopped working and now i cant boot into it at all
please he me...
Click to expand...
Click to collapse
Make sure you followed the right steps.
maxx007 said:
I am having a problem installing clockwork recovery from odin
i have already rooted my galaxy grand.
i installed a rom based on cm 10.1 and have been using it since a long time
now i wish to install new kitkat roms but it requires a new version of recovery.
so when i tried to install phill "philz_touch_6.12.8-i9082" from odin in download mode the installation dosen't begins at all
after that i tried many times installing other recoveries from the existing threads...but i failed
later my old clockwork recovery also stopped working and now i cant boot into it at all
please he me...
Click to expand...
Click to collapse
Just note, to install 4.4.2 roms you need on 4.2 STOCK, then flash newer recovery->flash it. Now just go to download mode and flash 4.2 STOCK via odin, flash CWM and 4.4.2 roms
Press thanks if my post helpful
Sent from my GT-I9082 using Tapatalk
Try to install the CWM mentioned in pawitp's CM11 thread. It should work for all Kitkat ROMs.
Another possible problem is incorrect driver installation or damaged USB cable, that maybe what's preventing your device to download from Odin.
I have a Samsung Galaxy s3 on Sprint. I'm trying to install CM11 4.4.2 but am having trouble. My phone is currently running 4.3 rooted (used cf autoroot and philz touch 6 w/ CWM 6.0.4.5.)
Here is the issue I'm having; I cannot install the CM11 rom, from the recovery (philz touch) screen it looks like it completes but the phone does not boot after installing the rom, but rather hangs the recovery screen logo and doesn't progress. From here I can reboot into recovery and restore my backup, The only backup I have is of 4.3 rooted. Also, I cannot install the OTA 4.4 update from sprint, which I thought I may need to do before installing CM11. When I try to install this update,the phone restarts into recovery and installs one package then asks if I want to install a package from an untrusted source, I hit yes the phone installs then restarts back into 4.3
I would like to update the phone to 4.4 and run the latest CM release, if anyone could help I would greatly appreciate it
I want to flash the CM 12.1 to my T-Mobile Galaxy S III but I don't know where to download the gapps for the latest nightly here
i also dont know if T-Mobile is arm, arm64, or x86
so I cant download in this site from cynogenmod
another question- is it the Cyanogen Recovery from this link will be use to flash the ROM or it is the recovery that will be use after flashing the CM12.1?
Use the ARM gapps.
I recommend using either Philz Touch recovery or TWRP, both of which can be flashed using Odin.
I have never used Cyanogen's recovery but have had great success with Philz and TWRP.
audit13 said:
Use the ARM gapps.
I recommend using either Philz Touch recovery or TWRP, both of which can be flashed using Odin.
I have never used Cyanogen's recovery but have had great success with Philz and TWRP.
Click to expand...
Click to collapse
thanks on your reply but I already solve it using the recovery from ROM manager app that I downloaded in the Play store but there is still a problem on it when I update using CyanogenMod updates it will fail to flash automatically after clicking install, so I still need to flash it manually, that's why I still need to flash the recovery provided with CyanogenMod
I have never used the recovery from cyanogen so I don't know if it will automatically dirty flash the update. I also don't know if the cyanogen recovery can flash other zips such as supersu, different gapp versions, etc.
Automatic flashing is not something I like to do because a nightly can cause problems. By using twrp, I can easily make a nandroid backup before flashing a new nightly.
Just tried the Cyanogen recovery and, after downloading a nightly update, I click install and it reboots to recovery and dirty flashes the updated ROM; however, the Cyanogen recovery would not flash the LP Gapps while Philz and TWRP were able to flash the Gapps. Also, the Cyanogen recovery does not have an option to create a nandroid backup.