Hello Guys
i wounder why i dont have the option of changing the Network Modes: GSM only, WCDMA only, LTE... in the network menu? i have At&T E980, is there anyway to have this menu like the other mobile phones? i dont want to keep changing it throught the hidden menu
thanks in advance...
77 views with no answer!!! does any one know whats im talking about or what! is it possible that nobody in the forum knows how to do that?
Search my friend..this question has already been answered earlier..to drop a clue (i don't know the whole stuff) edit build.prop to enable ro.network.mode and also change operator name..but beware changing operator name had consequences..search
vivebatu said:
Search my friend..this question has already been answered earlier..to drop a clue (i don't know the whole stuff) edit build.prop to enable ro.network.mode and also change operator name..but beware changing operator name had consequences..search
Click to expand...
Click to collapse
thanks my friend for your answer but the problem it that i have searched a lot and i've got almost nothing, the problem is that when i found what i was searching for i have done exactly as it is mentioned and it did not work, even that after restarting the phone the setting was still changed to "Enable" but it didn't work
anyway thanks
laith1234 said:
thanks my friend for your answer but the problem it that i have searched a lot and i've got almost nothing, the problem is that when i found what i was searching for i have done exactly as it is mentioned and it did not work, even that after restarting the phone the setting was still changed to "Enable" but it didn't work
anyway thanks
Click to expand...
Click to collapse
same here.
i think build.pro method not working on stock kitkat . earlier same was working on jellybean.
To enable network selection mode for lg kit kat e980 edit build prop using root explorer change the following line from ATT to OPEN root is required for this.
Justin92 said:
To enable network selection mode for lg kit kat e980 edit build prop using root explorer change the following line from ATT to OPEN root is required for this.
Click to expand...
Click to collapse
working perfectly.
thanks a ton.
Justin92 said:
To enable network selection mode for lg kit kat e980 edit build prop using root explorer change the following line from ATT to OPEN root is required for this.
Click to expand...
Click to collapse
Thanks a lot man, you rock works perfectly , keep it up . . .
Justin92 said:
To enable network selection mode for lg kit kat e980 edit build prop using root explorer change the following line from ATT to OPEN root is required for this.
Click to expand...
Click to collapse
you gonna lose the mobile hotspot function.... and just by curiosity I have play with the build.prop and I"m unable to write more than 3 letter when trying to edit to open...it give me "OPE"...can add the "N"
Yea thanks forgot it disable mobile hotspot but to add OPEN hit backspace by the first # to add the last letter.
Here's screenshots of how it should look.
Justin92 said:
Yea thanks forgot it disable mobile hotspot but to add OPEN hit backspace by the first # to add the last letter.
Click to expand...
Click to collapse
yeah thanks....I succeded, however since it disable the hotspot I"ve came to the original build prop.....
Thanks its working, now using gpro E980 with China mobile(zong) 4g LTE service in Pakistan.:good:
for enabling GSM and wcdma
laith1234 said:
77 views with no answer!!! does any one know whats im talking about or what! is it possible that nobody in the forum knows how to do that?
Click to expand...
Click to collapse
Dear Lalith
in setting pls select automatic mode and then
Pls type 5457#****# in keypad and goto bandwith selection select GS band with only and save
Note: *** is mobile model number like 980 or 240 or 220
For Rooted phone : Install app APM+ and activate it through Xposed. You will be able to get the option through Power menu button.
mbt.balaji said:
Dear Lalith
in setting pls select automatic mode and then
Pls type 5457#****# in keypad and goto bandwith selection select GS band with only and save
Note: *** is mobile model number like 980 or 240 or 220
Click to expand...
Click to collapse
Many thanks
Another working method to those that they are facing any issues with the build prop editor
Finally i got a logical answer for my issue and it worked just fine
Follow the instructions in this thread
http://forum.xda-developers.com/showthread.php?t=1193245
I simply followed the exact instruction for the ES root explorer
Have a nice day
Sent from my LG-E980 using xda Forums PRO
Related
How can I setup internet settings which I got from my service provider??
I am using CM9a (ICS 4.0.4)
thanks in advance!
anyone please
Ghalebi said:
anyone please
Click to expand...
Click to collapse
If you can find a download for anycut (just google it) grab that download put on sd install on phone. Open anycut create a short cut go to activities then scroll down to apns click that a short cut for apns will be put on home screen open it if it says sprint click on that then edit what you have if there isnt one there then hit menu button on phone far left bottom and click new then edit what you need this is in the forums somewhere I use it regularly hope it helps click thanks if it does.
Ghalebi said:
How can I setup internet settings which I got from my service provider??
I am using CM9a (ICS 4.0.4)
thanks in advance!
Click to expand...
Click to collapse
What do you mean by 'internet settings'? Do you mean the sprint proxy stuff?
calisro said:
What do you mean by 'internet settings'? Do you mean the sprint proxy stuff?[/QUOT This is how to change the apns of the phone also if you go to the phone dialer and type ##data# you can get to all the sprint proxies you will have to know you msl code to edit depends on what rom you have sometimes its *#*#data#*#* there you can edit everything you need to change for internet settings
---------- Post added at 05:14 PM ---------- Previous post was at 05:07 PM ----------
evo3d6 said:
calisro said:
What do you mean by 'internet settings'? Do you mean the sprint proxy stuff?[/QUOT This is how to change the apns of the phone also if you go to the phone dialer and type ##data# you can get to all the sprint proxies you will have to know you msl code to edit depends on what rom you have sometimes its *#*#data#*#* there you can edit everything you need to change for internet settings
Click to expand...
Click to collapse
If that doesn't help then find qpst download to computer I will find the link for you to use the program and step by step instructions for you to change your settings. Let me know how it works out.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Thanks for your help .. I still can't access internet configurations ..
Note: I have bought my phone from ebay then I rooted it and got my (Yemen Mobile) number programmed on it since I live in Yemen! So I think the tips that should be given to a normal sprint subscriber won't apply to me, .. or not?
G.
Ghalebi said:
Thanks for your help .. I still can't access internet configurations ..
Note: I have bought my phone from ebay then I rooted it and got my (Yemen Mobile) number programmed on it since I live in Yemen! So I think the tips that should be given to a normal sprint subscriber won't apply to me, .. or not?
G.
Click to expand...
Click to collapse
Hello. I think you need to define exactly what you are trying to do so someone can help you. What do you mean by "still can't access internet configurations"
Hey people,
I recently purchased a Korean variant of the S4 Mini. The model is SHV-370K. To my findings, its equal to the main version I9195. Is that correct? I do have the NFC chip installed. My question is, can I flash an official ROM like the ones used in the I9195? I have to much KOREAN language apps and I dont think I am prepared to root it. If I can flash an official ROM on this via ODIN?, will I still be able to get the OTA? My current version is 4.2.2. And checking on Sammobile I have the latest. The Korean stuff is just to much of a hassel and I am not sure if I will even get an update. Can I flash an official ROM and not lose warranty and root?
My second question is that I cannot make Group Play work on 2 of these S4 Mini's. They just dont connect. It says Network Lost and sometimes failed to join group. I've tried working it over with NFC and Wifi Direct. Normal gallery pictures and everything send easy, just this app that I really really want to use. Would be great if some one would help me.
My last question is that ChatON keeps giving an Error while checking for push services. I have tried everything. Changed networks, tried Mobile Networks. All my apps are up to date, even the annoying Samsung Push Service. Any help would be greatly appreciated.
Thank you so much people.
Have a great day.
Oh and I think its Carrier Branded? Cuz it has this Olleh writen on its back cover?
So ChatON and Group Play is working after they have been updated most recently. I did update them before but they dint seem to work. The current updates work good. Any one about the ROM issue? Would love some help <3.
ThuGzta said:
So ChatON and Group Play is working after they have been updated most recently. I did update them before but they dint seem to work. The current updates work good. Any one about the ROM issue? Would love some help <3.
Click to expand...
Click to collapse
you can only use a korean K rom, or a modify rom for the K version, otherwise you can brick your phone.
kms108 said:
you can only use a korean K rom, or a modify rom for the K version, otherwise you can brick your phone.
Click to expand...
Click to collapse
But isnt the offical ROM like France one flashable on this phone? The K Rom. Hmmm.
ThuGzta said:
But isnt the offical ROM like France one flashable on this phone? The K Rom. Hmmm.
Click to expand...
Click to collapse
you can try it.
kms108 said:
you can try it.
Click to expand...
Click to collapse
Eeek. I would like something for sure. Will continue my research. Thank you so much for replying. Would love some other opinions too, would be a great help for me.
Hi guys,
Have you found any solution to this problem? I'm also an [almost] happy owner of a Korean-branded S4 Mini and as USSD codes don't work, was told that firmware needs to be changed. But this being specifically a Korean phone, I'm not sure other ROMs out there will even be 100% compatible.
Thanks,
Vit
ervit said:
Hi guys,
Have you found any solution to this problem? I'm also an [almost] happy owner of a Korean-branded S4 Mini and as USSD codes don't work, was told that firmware needs to be changed. But this being specifically a Korean phone, I'm not sure other ROMs out there will even be 100% compatible.
Thanks,
Vit
Click to expand...
Click to collapse
you have to enter it's secret menu, and insert the password, each network has it's own password.
kms108 said:
you have to enter it's secret menu, and insert the password, each network has it's own password.
Click to expand...
Click to collapse
Thanks, but I don't think I have to enter a password, since other phones work without it. Unless it's somehow phone-specific, but my operator reps would probably have told me (instead they just said the firmware needs to be changed). What secret menu are we talking about? perhaps aI could investigate. At any rate, if there someone has managed to flash the Korean version of the phone with a more "universal" firmware, I'd like to know. Thanks!
ervit said:
Thanks, but I don't think I have to enter a password, since other phones work without it. Unless it's somehow phone-specific, but my operator reps would probably have told me (instead they just said the firmware needs to be changed). What secret menu are we talking about? perhaps aI could investigate. At any rate, if there someone has managed to flash the Korean version of the phone with a more "universal" firmware, I'd like to know. Thanks!
Click to expand...
Click to collapse
This secret menu allows you to modify the network, frequencies and other stuff, each korean service privider has it's own password.
try typing this on the dialer.
319712358
kms108 said:
This secret menu allows you to modify the network, frequencies and other stuff, each korean service privider has it's own password.
try typing this on the dialer.
319712358
Click to expand...
Click to collapse
it asks for a password. I tried 0821 but it doesn't seem to work
ervit said:
it asks for a password. I tried 0821 but it doesn't seem to work
Click to expand...
Click to collapse
the password is network related
kms108 said:
the password is network related
Click to expand...
Click to collapse
I found the password on a Russian forum, it's 774632. But I don't see where in that menu I can enable USSD
ervit said:
I found the password on a Russian forum, it's 774632. But I don't see where in that menu I can enable USSD
Click to expand...
Click to collapse
you don't need the menu for the ussd, korean version has their own set of ussd, they are different from the international version, some are the same , but most are different.
kms108 said:
you don't need the menu for the ussd, korean version has their own set of ussd, they are different from the international version, some are the same , but most are different.
Click to expand...
Click to collapse
Please forgive me as I'm a total noob, but after your last reply it hit me: we're probably talking about different USSDs. I meant that my operator USSD codes didn't work, the ones that I send to find out my remaining balance and to also enable/disable services etc. (e.g. I would send *444#2#1 to find out my remaining balance), not the phone's own USSD codes (like the service menus etc, e.g. the IMEI check with *#06#). Operator USSD codes just don't work - the phone either sits trying to connect for a few minutes (locking the phone down during this time), or just says that the signal is too weak. So I guess I do need to install a different firmware to fully unlock it.
Thanks for trying to help though, I'm learning new stuff!
ervit said:
Please forgive me as I'm a total noob, but after your last reply it hit me: we're probably talking about different USSDs. I meant that my operator USSD codes didn't work, the ones that I send to find out my remaining balance and to also enable/disable services etc. (e.g. I would send *444#2#1 to find out my remaining balance), not the phone's own USSD codes (like the service menus etc, e.g. the IMEI check with *#06#). Operator USSD codes just don't work - the phone either sits trying to connect for a few minutes (locking the phone down during this time), or just says that the signal is too weak. So I guess I do need to install a different firmware to fully unlock it.
Thanks for trying to help though, I'm learning new stuff!
Click to expand...
Click to collapse
Mate I have the same problem here. The USSD codes just dont work. My balance check does work though. All I have noticed that USSDS that need two steps dont work. Example to transfer credits, I type *456# and in return it should ask me what number I need to transfer my credits, but it just doesnt work. I have tried the menu but no idea what that is all about. Still cannot find what to do.
Secondly I met some one at the forums who has the same device as ours. HE said installing Cynogen Mod is working and it doesnt effect us having a model of SHV something. LOL. So I dont know if I should go ahead and flash a custom rom. I would rather flash an official rom but no one is helping here and I cant seem to find any. Like maybe we could flash an english rom from UK. Something official like the normal I9195 have! Not some korean ones.
New Update.
Hey people! I just got an OTA update and all I see new is a Google Drive icon. The update is still on 4.2.2 and not 4.3. It was about 96mb of file size. How can I take out the changelog and read what bug fixes it brings?
hello
how to do I move from SHV or change the CSC code?
for now getting only the Korean pop up messages.
Want to change to Australia CSC code.
deepudips said:
how to do I move from SHV or change the CSC code?
for now getting only the Korean pop up messages.
Want to change to Australia CSC code.
Click to expand...
Click to collapse
I've read about CSC Select app (on google play market), but I think you need root for this to work. I'm not an expert on that though.
Please write here if you manage to get any results (even if negative).
Hello All,
I have just joined the forum and need help from all senior members
I am from pakistan and have LG G2.(LS-980 -Sprint) running at Kitkat 4.4.2, Kernal Version 3.40 Software Version LS980ZVD
I am facing some issues in using this cell.
1. When i try to connect cell with laptop using LG Mobile Support Tool, i can not find the option in Setting >USB Connection > PC Software option in cell phone.
2. I am not able to check the update of Frimware , it gives the authentication error when i try to check for update.
Can any one please help me in solving these problems.. i am again mentioning that i am using this cell in Pakistan and it is unlocked to all networks.
Regards
Adnan
if your already on ZVD, then your on the latest already
jcwxguy said:
if your already on ZVD, then your on the latest already
Click to expand...
Click to collapse
there is one other issue, i can not configure internet setting for cellular network provider. why it is so..? neither i can go for 4g setting,. not allowing me to add APN etc . can you guide me how can i configure internet setting, i am attaching screenshot of the same. i really need to solve this thing. help me out
adnannaveed said:
there is one other issue, i can not configure internet setting for cellular network provider. why it is so..? neither i can go for 4g setting,. not allowing me to add APN etc . can you guide me how can i configure internet setting, i am attaching screenshot of the same. i really need to solve this thing. help me out
Click to expand...
Click to collapse
flash cm11 or 2faced rom and see if it has that option
or follow this guide
http://forum.xda-developers.com/showthread.php?t=2655133
jcwxguy said:
flash cm11 or 2faced rom and see if it has that option
or follow this guide
http://forum.xda-developers.com/showthread.php?t=2655133
Click to expand...
Click to collapse
please guide me how to do that.. or give me some link or thread so i can view the process. thanks
Hi guys
i'm using a lumia 930 with the actual wp10 build.
yesterday i had to learn, there is no way to use a static ip for my wlan.
ok, i could buy an app, witch would do it.
but i really dont get the point, why i should buy for such a standard function...
is there anyway to do this by my self?
of course
use my tweak in my signature
u need interop unlock phone
very easy
kwanice said:
of course
use my tweak in my signature
u need interop unlock phone
very easy
Click to expand...
Click to collapse
hey cool, thx for the info.
are there any problems with newer wp10 builds?
or maybe anything negativ about hacking a wp10 lumia 930?
haven't tried anything like this on wp, so on this OS im a total noob... ^^
i will try it as soon as possible.
StaticIP
huberei said:
static ip for my wlan.
Click to expand...
Click to collapse
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WCMSvc\WifiNetworkManager\Config]
"EnableStaticIP"=dword:1
http://forum.xda-developers.com/windows-10/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
http://forum.xda-developers.com/windows-10/windows-10-mobile/wptweakers-2015-08-17-added-5th-quick-t3180474
bbakbbaki said:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WCMSvc\WifiNetworkManager\Config]
"EnableStaticIP"=dword:1
http://forum.xda-developers.com/win.../jailbreak-interop-unlock-windows-10-t3178140
http://forum.xda-developers.com/win...ptweakers-2015-08-17-added-5th-quick-t3180474
Click to expand...
Click to collapse
Worked in my L930
bbakbbaki said:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WCMSvc\WifiNetworkManager\Config]
"EnableStaticIP"=dword:1
http://forum.xda-developers.com/windows-10/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
http://forum.xda-developers.com/windows-10/windows-10-mobile/wptweakers-2015-08-17-added-5th-quick-t3180474
Click to expand...
Click to collapse
I tried the provided list but the reg editor doesn't seem to write the reg entry. I used root tool v2.0. What seems to be the problem? Before using root tool I updated my 1520 to the latest update I think that matters(does it matter?).
1337_807 said:
I tried the provided list but the reg editor doesn't seem to write the reg entry. I used root tool v2.0. What seems to be the problem? Before using root tool I updated my 1520 to the latest update I think that matters(does it matter?).
Click to expand...
Click to collapse
Root tool is your problem. It used to work fine previously but now it's quite useless. Don't know why. Try with another reg tool.
Satirus said:
Root tool is your problem. It used to work fine previously but now it's quite useless. Don't know why. Try with another reg tool.
Click to expand...
Click to collapse
any that you can recommend? I haven't rooted my device yet. I tried the tweaks but it doesn't deploy I receive errors.
1337_807 said:
any that you can recommend? I haven't rooted my device yet. I tried the tweaks but it doesn't deploy I receive errors.
Click to expand...
Click to collapse
You can do that with Interop Tools
Satirus said:
You can do that with Interop Tools
Click to expand...
Click to collapse
I'll give it a shot.
bbakbbaki said:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WCMSvc\WifiNetworkManager\Config]
"EnableStaticIP"=dword:1
http://forum.xda-developers.com/windows-10/windows-10-mobile/jailbreak-interop-unlock-windows-10-t3178140
http://forum.xda-developers.com/windows-10/windows-10-mobile/wptweakers-2015-08-17-added-5th-quick-t3180474
Click to expand...
Click to collapse
Create new or edit?
Thanks.
Do you know "Provisioning package" ？
Go to Seetings——Accounts——Access work or school——Add or remove a provisioning package——Add package.
I'll give you a “.ppkg” package, you can add it.
Download link：
pan.baidu.com/s/1bo2hkWR
Tips:This is China's network disk, the speed will be slower.
Finally..
I managed to enable IP Static with WPTweaker : http://forum.xda-developers.com/windows-10/windows-10-mobile/wptweakers-2015-08-17-added-5th-quick-t3180474
Thanks
vbnoob said:
Finally..
I managed to enable IP Static with WPTweaker : http://forum.xda-developers.com/windows-10/windows-10-mobile/wptweakers-2015-08-17-added-5th-quick-t3180474
Thanks
Click to expand...
Click to collapse
hi sorry for posting in old thread...
i've just updated my old lumia1020 to the latest w10m version 10.0.15254.369
i was hoping that in this version that the static ip option was enabled by default...
i was wrong...
need static ip option badly since my home and office wifi need to manually configure the ip/dns setting before i can use the network...
is there any way to configure static ip without interop unlock (or is it safe to use wp internal to unlock root with my current w10m build on nokia lumia 1020?? i update them using iutool method)
huberei said:
is there anyway to do this by my self?
Click to expand...
Click to collapse
https://forum.xda-developers.com/windows-10-mobile/guideline-change-dns-lumia-950-vs-lumia-t3716736
augustinionut said:
https://forum.xda-developers.com/windows-10-mobile/guideline-change-dns-lumia-950-vs-lumia-t3716736
Click to expand...
Click to collapse
These settings aren't available in Windows 10 Mobile 1703+ due to new WiFi menu. But the old one isn't deleted, it's just hidden. You can use Interop Tools to run it and to change Static IP settings there.
Go to Interop Tools - General - Applications - Package List (swipe left from Deployment options). Find WiFi package there, tap on it and use Launch App button to open it. There you can find Static IP settings.
Of course, you must activate Static IP settings at first. You can use the tweak in Interop Tools for it or the provisioning package (you can find it, for example, here).
He said device portal.
A_Deerslayer said:
These settings aren't available in Windows 10 Mobile 1703+ due to new WiFi menu. But the old one isn't deleted, it's just hidden. You can use Interop Tools to run it and to change Static IP settings there.
Go to Interop Tools - General - Applications - Package List (swipe left from Deployment options). Find WiFi package there, tap on it and use Launch App button to open it. There you can find Static IP settings.
Of course, you must activate Static IP settings at first. You can use the tweak in Interop Tools for it or the provisioning package (you can find it, for example, here).
Click to expand...
Click to collapse
Just when I had lost all hope! Thanks! It didn't show when I searched in the box in the upper part but it there if you scroll all the way down to W.
Hello guys,
I have a L920 running the latest windows 10 mobile insider build. My phone not showing 4G option in SIM setting.
Is there any way to enable it by editing registry?
Thank you in advance.
Try installing Interop Tools or vcREG then modify your registry like this
winphouser said:
@mahdi75
Code:
HKLM\Software\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX\HideHighestSpeed4G3GOnly = dword:0
https://raw.githubusercontent.com/sensboston/WPTweaker/master/WPTweaker/Tweaks.xml
Click to expand...
Click to collapse
Thank,
I tried it but it wont show up. I tried to test it by adding HideHighestSpeed3GOnly = dword:1 then the 3G Only option disappear.
Any idea what is going on?
s0rata said:
Hello guys,
I have a L920 running the latest windows 10 mobile insider build. My phone not showing 4G option in SIM setting.
Is there any way to enable it by editing registry?
Thank you in advance.
Click to expand...
Click to collapse
And addind these keys also doesn't work?
4G Only: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX\HideHighestSpeed4GOnly=0
4G or 3G Only:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX\HideHighestSpeed4G3GOnly=0
4G (3G preferred):
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cellular\MVSettings\IMSISpecific\Default\CellUX\ShowHighestSpeed3GPreferred=1
Not at all. The only one that work is HideHighestSpeed3GOnly to hide 3GOnly.
I saw there is a field test as well. ##3282# ##DATA#.
Already tried, but show nothing.
I tried to edit registry: PartnerImmediateDialStrings, but it broke Phone app that make me have to reset my phone.
WPTWEAKER.