are stock recovery and boot files same for all regional versions of ruu. Please ans me. I am having problem afterrevert back to ruu. 3G net work stop working and I can't use 3g internet. Please help, if anyone knows about it.
mahedi_aiub said:
are stock recovery and boot files same for all regional versions of ruu. Please ans me. I am having problem afterrevert back to ruu. 3G net work stop working and I can't use 3g internet. Please help, if anyone knows about it.
Click to expand...
Click to collapse
Are you able to use 2G atleast? Did you check the APN settings for your carrier?
basappa said:
Are you able to use 2G atleast? Did you check the APN settings for your carrier?
Click to expand...
Click to collapse
Yes, I can use 2G. I checked apn settings. When I select WCDMA only, network just goes off. but when GSM or WCDMA Preffered is selected, then only 2G starts.
Related
hello i am new here and need some help. my problem is that i have my phone and i cant conect to 2G network in vodafone (greece).my sim card is ok because i have cheked it in another phone. when i switchon my phone i cannot conect to 2g network (it says something about the sim), and it only conects to 3G automatically.the 3G signal is bad in greece so i cannot use it very well and i would like to make it connect to 2g.tell me please what to do ?what kernel,what rom ,what frimware i have to put to fix my problem. my model is Xperia Play R800i.
Try by going to Settings > Wireless & networks > Mobile networks > Network mode and select GSM only.
KralosMX said:
Try by going to Settings > Wireless & networks > Mobile networks > Network mode and select GSM only.
Click to expand...
Click to collapse
i have trai this bat nothing when i select this gsm only i can found network bat i can not conect.so auto reterns to 3G mode
billbob0340 said:
i have trai this bat nothing when i select this gsm only i can found network bat i can not conect.so auto reterns to 3G mode
Click to expand...
Click to collapse
i have instal the cm7 in my phone
billbob0340 said:
i have instal the cm7 in my phone
Click to expand...
Click to collapse
please help someone
Does changing the search mode to manual help?
________________________
Sent from my Xperia Play
MilkyJoePD said:
Does changing the search mode to manual help?
________________________
Sent from my Xperia Play
Click to expand...
Click to collapse
no.is it a problem whith the baseband?
billbob0340 said:
someone please!!!!
Click to expand...
Click to collapse
billbob0340 said:
billbob0340 said:
someone please!!!!
Click to expand...
Click to collapse
hello sore for mi englise.mi fone is
boutloader unlocked :yes
sim lock = 0
it whorks on mi network vodafone .gr only in 3g
wen i select 2g mi antena is closing,i cant conect!!!!
and reterns to 3g .please help me.thank you
Click to expand...
Click to collapse
I also face the same problem, tried with many roms including the r800a but none of them fix the problem.. Is this an issue for all R800 type phone?
Is there any way to fix this?
CM7? Why?
billbob0340 said:
hello i am new here and need some help. my problem is that i have my phone and i cant conect to 2G network in vodafone (greece).my sim card is ok because i have cheked it in another phone. when i switchon my phone i cannot conect to 2g network (it says something about the sim), and it only conects to 3G automatically.the 3G signal is bad in greece so i cannot use it very well and i would like to make it connect to 2g.tell me please what to do ?what kernel,what rom ,what frimware i have to put to fix my problem. my model is Xperia Play R800i.
Click to expand...
Click to collapse
My experience with CM7 has always been negative regarding cellular service. There's always some problem. If you want to fix your problem, and you don't care about losing CM7, try flashing the latest stock firmware you are comfortable with using onto the phone, with the latest baseband that is going to work in your country.
---------- Post added at 04:03 AM ---------- Previous post was at 03:52 AM ----------
tulun said:
I also face the same problem, tried with many roms including the r800a but none of them fix the problem.. Is this an issue for all R800 type phone?
Is there any way to fix this?
Click to expand...
Click to collapse
What is your firmware/baseband?
Your problem is probably in the baseband. Or your service provider isn't in that area with that coverage? Try flashing a different band or ftf.
my one x perfectly working with 3 uk sim card but not getting any 2g signals on any other sim cards.
im getting 3g servcie with all sim cards but not 2g.can use internet but cant make phone calls
but can use perfectly with 3...
phone is running letest 2.17.401.2 and my cid is HTC_001
phone is not asking for any unlock code when i turn on with diffrent sim card just saying no signals but data icon is come up
and i can use internet properly.
please if somone else had that issue or know how to fix it please let me know..
thanks
Type in the dialer *#*#4636#*#* then click on phone information and scroll down to where it says "set preferred network type" is. My phone says WCDMA preferred. You can click on what yours says and change it. I have boxed round the bit in red (check the attached pic)
Ya I checked its already on wcdma preferred .I tried all others all well but same.no signals but 3g data working fine...is there any other settings for this?
Thanks for replying any ways..
Sent from my HTC Incredible S using xda app-developers app
silverbox750 said:
Ya I checked its already on wcdma preferred .I tried all others all well but same.no signals but 3g data working fine...is there any other settings for this?
Thanks for replying any ways..
Sent from my HTC Incredible S using xda app-developers app
Click to expand...
Click to collapse
reflash the ruu. It might be a radio bug.
Just flash the 2.17.401.11 again still the same...is there any other way to flash just the radio or can I flash any diffrent radio..?
silverbox750 said:
Just flash the 2.17.401.11 again still the same...is there any other way to flash just the radio or can I flash any diffrent radio..?
Click to expand...
Click to collapse
You can flash different radio's if you are htc dev unlocked and have cwm as your recovery
http://forum.xda-developers.com/showthread.php?t=1689679&highlight=radio
ghori1989 said:
You can flash different radio's if you are htc dev unlocked and have cwm as your recovery
http://forum.xda-developers.com/showthread.php?t=1689679&highlight=radio
Click to expand...
Click to collapse
flashed the other radios but still the same..
but thank you very much for you help mate..hope any one out there know how to fix that fault..
The only thing i can suggest is that you send it back to htc for repair.
This might be a silly suggestion but have you tried going into settings then mobile network, then network mode and changing that to GSM/WCDMA auto?
ste1164 said:
This might be a silly suggestion but have you tried going into settings then mobile network, then network mode and changing that to GSM/WCDMA auto?
Click to expand...
Click to collapse
yes i tried every thing..but same thing.
htc refused to repair coz i think my bootloader says relocked..and my phone screen was broken and replaced it my self..
HI,
I am using ls980 on android 4.4.2 unlocked
1. I want to put my phone on GSM only mode , i tried everything nothing seems working neither any app from play store is working , I am rooted.
2. Can I downgrade or upgrade my phone and still have phone unlocked ( i bought it unlocked and dont have code to unlock it again )
whats up man, try this out, go to settings
tethering & networks
Mobile Networks
Third one down should be, Network mode
open network mode, set GSM/UMTS
I wanted to note, I edited my build.prop, ro.telephony.default_network = 3,
I have advanced signal status installed from the playstore, set to GSM auto (PRL)
My Preferred network mode: GSM/WCDMA according to the phone. Best of luck!!
your phone is not supported
Cronic2009 said:
whats up man, try this out, go to settings
tethering & networks
Mobile Networks
Third one down should be, Network mode
open network mode, set GSM/UMTS
I wanted to note, I edited my build.prop, ro.telephony.default_network = 3,
I have advanced signal status installed from the playstore, set to GSM auto (PRL)
My Preferred network mode: GSM/WCDMA according to the phone. Best of luck!!
Click to expand...
Click to collapse
I wanr gsm only no umts preferred
Advance signal syatus under phine information giving your phone is not supported
How to do gsm only?
Is editing build.prop will do the trick?
yes editing the build.prop, default_network will make the phone connect to GSM auto (PRL) upon boot up
Cronic2009 said:
yes editing the build.prop, default_network will make the phone connect to GSM auto (PRL) upon boot up
Click to expand...
Click to collapse
Not able to edit overwrite
Value again reset to 10 after restarting
I am on 4.4.2 not on 4.2.2
Cronic2009 said:
whats up man, try this out, go to settings
tethering & networks
Mobile Networks
Third one down should be, Network mode
open network mode, set GSM/UMTS
I wanted to note, I edited my build.prop, ro.telephony.default_network = 3,
I have advanced signal status installed from the playstore, set to GSM auto (PRL)
My Preferred network mode: GSM/WCDMA according to the phone. Best of luck!!
Click to expand...
Click to collapse
can you tell me if i want to change my network to GSM/WCDMA in my zvc update. what i have to do ? do i have to change ro.telephony.default_network = 3 or anything else ?
Yes, just set it in the build.prop, yes 3 will give you gsm/wcdma
Cronic2009 said:
Yes, just set it in the build.prop, yes 3 will give you gsm/wcdma
Click to expand...
Click to collapse
I have bricked my phone after editing buil.prop network.value to 3
Phone is giving error crashing after restarting
I have to flash firmware again after that , all my data got lost
Is you are on android 4.4.2 because i am on it
Cronic2009 said:
Yes, just set it in the build.prop, yes 3 will give you gsm/wcdma
Click to expand...
Click to collapse
i have done it and it's now showing WCDMA Preferred in the network menu. but what about sign it's only showing GSM on the notification panel not showing 3g or anything and also tell me how to know if my internet is on 3g or 2g ? and what is the number of WCDMA only not WCDMA/GSM ?
Reardon said:
i have done it and it's now showing WCDMA Preferred in the network menu. but what about sign it's only showing GSM on the notification panel not showing 3g or anything and also tell me how to know if my internet is on 3g or 2g ? and what is the number of WCDMA only not WCDMA/GSM ?
Click to expand...
Click to collapse
For gsm only number is 3 but in network it will show wcdma/gsm but you must be on gsm only , check network under about yo see which network you are getting
Tell me what steps you did if you got success without bricking your device
irbaaz said:
For gsm only number is 3 but in network it will show wcdma/gsm but you must be on gsm only , check network under about yo see which network you are getting
Tell me what steps you did if you got success without bricking your device
Click to expand...
Click to collapse
i have done it to number 3 it's showing WCDMA Preferred. but i dont want to use gsm i want to use WCDMA Only. don't know the number which i have to put there for WCDMA. and my mobile is working fine after restarting it and on this 3 number value
Reardon said:
i have done it to number 3 it's showing WCDMA Preferred. but i dont want to use gsm i want to use WCDMA Only. don't know the number which i have to put there for WCDMA. and my mobile is working fine after restarting it and on this 3 number value
Click to expand...
Click to collapse
Is you are in 4.4.2 build?
Reardon said:
i have done it to number 3 it's showing WCDMA Preferred. but i dont want to use gsm i want to use WCDMA Only. don't know the number which i have to put there for WCDMA. and my mobile is working fine after restarting it and on this 3 number value
Click to expand...
Click to collapse
ro.telephony.default_network
0 = WCDMA Perfered
1 = GSM Only
2 = WCDMA Only
3 = GSM/WCDMA (auto mode, according to PRL)
4 = CDMA / EVDO. Perfered
irbaaz said:
Is you are in 4.4.2 build?
Click to expand...
Click to collapse
yes i am on zvc 4.4.2 stock updated.
Reardon said:
yes i am on zvc 4.4.2 stock updated.
Click to expand...
Click to collapse
Which software you have used to edit build.prop?
irbaaz said:
Which software you have used to edit build.prop?
Click to expand...
Click to collapse
i am using ROM Toolbox Lite. and thanks for the numbers. but i have changed it to 2 and its showing WCDMA Preferred. not WCDMA Only in the networks
Reardon said:
i have using ROM Toolbox Lite. and thanks for the numbers. but i have changed it to 2 and its showing WCDMA Preferred. not WCDMA Only in the networks
Click to expand...
Click to collapse
What was your default value of ro.telephony.default_network
I have 10 as default value
irbaaz said:
What was your default value of ro.telephony.default_network
I have 10 as default value
Click to expand...
Click to collapse
default value was 10 before.
Reardon said:
default value was 10 before.
Click to expand...
Click to collapse
So changing value to 2 worked for you?
Hello,
I flash back the correct KDZ file for my E986 (based on EMEI number) and I don't have 4G LTE? IT IS in the menu, but it never works. It's allways in 3G.
In this case, is it probably a hardware problem?
Thx
Yannick1988 said:
Hello,
I flash back the correct KDZ file for my E986 (based on EMEI number) and I don't have 4G LTE? IT IS in the menu, but it never works. It's allways in 3G.
In this case, is it probably a hardware problem?
Thx
Click to expand...
Click to collapse
more like and apn setting. search in google your carrier name + LTE + apn setting. You should find the information to enter in tethering&networks>mobile networks>Access point names.
I don't want to disappoint you but I have tried anything the last month and nothing works, if you find any solution please let me know.
Please my G928T (unlocked) using internationaly, suddenly cannot no longer receive 3G network, can only reveive 2G/Edge. Once i set it to 3G only, the network will go and I will be off Network. But 3G use to work before now.
I have flashed the default most recent firmware (G28TUVU4DQC2) from sammobile yet it didn't work.
Pls I need help.
Thanks
Hi, I'm in the same situation, did you find a solution?
sunnycee said:
Please my G928T (unlocked) using internationaly, suddenly cannot no longer receive 3G network, can only reveive 2G/Edge. Once i set it to 3G only, the network will go and I will be off Network. But 3G use to work before now.
I have flashed the default most recent firmware (G28TUVU4DQC2) from sammobile yet it didn't work.
Pls I need help.
Thanks
Click to expand...
Click to collapse
Have you tried changing SIM Cards?
What about booting to recovery and performing a factory reset?