HI! 2 months ago my xperia S drown in a glass of water, i repared it to a store and when i put the usb cable the led notification is red but the phone wont start.. i can see the logo 'SONY' but it's really dark i cant even see anything, it's like a blackscreen.. what do u think it is ?
Telephone wet (dead, no sign of lifes) --> i repared it and now the led turns on and the phone is charching but it wont turn on. Do you think it's battery ? or the screen i should replace? thank u
Most likely the screen
Sent from my One X using XDA Premium 4 mobile app
It's the LCD screen
Sent from my One M8 using XDA Free mobile app
Related
Hi. When I wake my Desire, the screen is blank. However, the 4 hard keys are lit up, and a tiny crack at the bottom of the screen is lit up. When I put my finger at the slide to unlock, there is a small vibration, indicating that the phone is responsive but not the display. Issue persists after taking out the battery and reinserting.
Thanks in advance.
You mean that your screen doesn't work at all, or at wake up only?
Sent from my HTC Desire using XDA App
I'm guessing that your screen is broken (not the touch panel, the actual screen) because mines dropped the other day and the same thing was happening so I replaced the screen and it works fine now
Sent from my HTC Desire using XDA App
dexter93 said:
You mean that your screen doesn't work at all, or at wake up only?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
It doesn't work at all.
soyef said:
I'm guessing that your screen is broken (not the touch panel, the actual screen) because mines dropped the other day and the same thing was happening so I replaced the screen and it works fine now
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Was it covered by your warranty? Where did you replace the screen?
Well if it didn't worked when you got the phone and/or you haven't messed with it (did not drop, change radio...) (eg. it stopped working one day) and the warranty is valid,I don't see why it shouldn't be covered..
Sent from my HTC Desire using XDA App
I didn't bother with the warranty, I just got it replaced at a local phone shop
You could just order a screen online and try it yourself but make sure you order the right screen
Sent from my HTC Desire using XDA App
The exact same thing happened to me too. It went into service, they've replaced the screen and the motherboard (wtf?), and now it's all ok, all of this free of charge. Don't bother buying the screen yourself, just go the easy way. It might take a bit longer, but it sure is cheaper.
My desire had this problem when I just bought it, whenever there is a black background, the screen would have 3 very dim white semicircles at the edge of the screen, should I send it back to HTC?
Sent from my HTC Desire using XDA App
Sounds like dead pixels... you should send it back
Will they replace the lcd or the whole phone?
Sent from my HTC Desire using XDA App
In which way is this important?
TouchPaled from Oxygen with Transparent XDA App
Data on the phone.
Sent from my HTC Desire using XDA App
sebastianlow said:
Will they replace the lcd or the whole phone?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
They'll replace only digitizer.
sebastianlow said:
My desire had this problem when I just bought it, whenever there is a black background, the screen would have 3 very dim white semicircles at the edge of the screen, should I send it back to HTC?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I had a few bright spots on my LCD. HTC replaced it (got it done in the US) and now they are gone. They did a very good job.
Yours sound like back light leakage? Mine has a pale glow on the mid right side against black background, stayed that way before and after replacing the LCD.
Yeah dropped my phone then screen had a few white dots
Hey Guys,
Every time i slide out the game pad on my Xperia Play r800i the screen turns off and I have to wait about 10 seconds until it comes on again.Sometimes I can see that the screen is still on but it is really dim and very hard to see and sometimes the brightness keeps changing.
I used PC Companion and Repaired the phone but it did nothing.
Please Help!!
Nothing happened to your phone, its normal. It just takes time to load the xperia play app.
Sent from my R800i using XDA App
Gauravpreetsingh said:
Nothing happened to your phone, its normal. It just takes time to load the xperia play app.
Sent from my R800i using XDA App
Click to expand...
Click to collapse
No , When I slide it out the screen locks and I have it set NOT to launch the xperia play app.
So you probably have damaged flex cable. Be ready for giving your phone to the service centre soon.
Sent from my beautiful Xperia PLAY using xda premium
hey guys, my htc one x screen broke and sent it fir repair were they changed the screen obviously. I just got it back, and for some reason the screen is significantly brighter. And no i dont mean the screen brightness that can be adjusted.i mean the colors are brighter, like facebook is really light blue!! Any help?
Sent from my HTC One X using xda app-developers app
send it back
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
velan1 said:
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
I remember something that when u change ur digitizer you have to flash Stock firmware again.. something on those lines.. am not sure.. try searching that.
saqibkhan said:
I remember something that when u change ur digitizer you have to flash Stock firmware again.. something on those lines.. am not sure.. try searching that.
Click to expand...
Click to collapse
yup tried that also, can't find the solution. wanna know is it digitizer or mainboard
velan1 said:
My XP got static screen about 6 months back, now I replaced the digitizer. Now my phone boots up it shows Sony Ericsson logo and after some time it again goes to static screen,
Any idea what's the problem, I tried searching the forum and didn't get a clear answer, in a topic it was mentioned as mother board problem,
Help me out
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried flashing or anything? Maybe thw cable got damaged during install?
Sent from my LT28i using XDA Free mobile app
psxpetey said:
Have you tried flashing or anything? Maybe thw cable got damaged during install?
Sent from my LT28i using XDA Free mobile app
Click to expand...
Click to collapse
so it is not board problem, so i can try another cable...
IMHO, it's faulty slider flex cable
Ttry to power up phone with gamepad opened. If you get different screens with gamepad opened and closed (static screen, colored "snow", black screen etc) then it's surely slider flex cable
Tried with slider open but no change, only Sony Ericsson logo display for long time, lock and unlock it show static screen
Sent from my D5503 using XDA Free mobile app
velan1 said:
Tried with slider open but no change, only Sony Ericsson logo display for long time, lock and unlock it show static screen
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
Did you try 're flash Rom etc
Sent from my LT28i using XDA Free mobile app
To flash a rom, it's not even entering in recovery, only Sony Ericsson logo appears and after that it gives static screen, even for custom kernel the logo appears that's all
Sent from my D5503 using XDA Free mobile app
HELP
Can anybody confirm it is not a main board problem, so i can buy a new cable and try again....