Develop Bugs

i stuck on motorola logo

hello, today i have rooted my motorola defy.
than i have installed an app. recovery.apk
so i have restarted the phone to recovery mode.
i made full wipe. wiped system and data, and flashed miui.zip, downloaded from miuiandroid.com
now my phone won´t start. i stuck on motorola logo.
i can not get into recovery. if i connect the phone to my pc, it is not beeing detected.
what can i do to rescue my phone ? please help me

okay. on a german forum i found a quide to get into bootloader.
1. download and install this driver: http://www.motorola.com/Support/DE-...tware-and-Drivers/USB-and-PC-Charging-Drivers
2. choose the appropriate sbf file and unzip it to a folder on your desktop: http://sbf.droid-developers.org/umts_jordan/list.php
3. download and install rsd lite: http://www.chip.de/downloads/RSD-Lite_49139659.html
4.
a) take off battery
b) press power button und volume +
c) put in the battery
d) release the buttons
now you will get into bootloader.. start rsd lite. select sfb file ...
the rest is done automaticly. wait for 10 minutes

help for me plz !!
sorry for my english
i have nearly the same problem but....
in rds lite the button star dont work....
I think and why the imei dont show the model dont show -
i need help for this my cell stop in the simboll (( M )) and dont work -
i not can acess bootmenu
i have 2 defy and the batery is charge
plz if you have solution
verry ty

you can hard reset the phone.its work for me.then flash the rom again..no more stuck at motorola logo. shut down the phone.press volume down button while pressing power button.then you enter the logo of green android. press volume up and down at the same time. then you reset the phone n wipe everything

JOBFEAR said:
sorry for my english
i have nearly the same problem but....
in rds lite the button star dont work....
I think and why the imei dont show the model dont show -
i need help for this my cell stop in the simboll (( M )) and dont work -
i not can acess bootmenu
i have 2 defy and the batery is charge
plz if you have solution
verry ty
Click to expand...
Click to collapse
You have to hard reset. Follow the above steps mentioned and open RSD lite as administrator. If you don't install the drivers your phone wont be detected

how can i do if my RSD is not working(ie, I just spend 1s in one sbf, it tells me it passed. the other sbf are all not workable)
also, i cannot make a stock recovery in bootmenu,
please help me

Maybe this will help:
http://www.youtube.com/watch?v=Vd9EjgvcbXY

Cacceli said:
Maybe this will help:
http://www.youtube.com/watch?v=Vd9EjgvcbXY
Click to expand...
Click to collapse
thx and the problems are done

Device wont turn on but shows when connected via usb

Hey there,
I got this Desire Z from a friend as he was going to throw it away,
it does turn on, no notification light, screen doesnt turn on, no sounds but when i connect to my computer it shows up as Zeus Flash Device
Is the phone dead or is there any way to revive it?
im unsure what happened prior to it stopping working
any help appriciated
edit: found out its hard bricked, oh well lol

havokk said:
Hey there,
I got this Desire Z from a friend as he was going to throw it away,
it does turn on, no notification light, screen doesnt turn on, no sounds but when i connect to my computer it shows up as Zeus Flash Device
Is the phone dead or is there any way to revive it?
im unsure what happened prior to it stopping working
any help appriciated
edit: found out its hard bricked, oh well lol
Click to expand...
Click to collapse
Is this phone Rooted? well try this pull the battery out put it back in, and press and hold volume down button and press power and see if you are able to get into boot loader...

tricky !
two options
1- check bootloader (volume down + power) , if it gets a white screen with options , you can repair the device.
2- if it does not go into bootloader , then first download Htc sync for desire z , setup the android SDK , then plug ur phone inn, in command prompt , type *adb devices* .
If it shows a serial number below List Of Devices , then get back to this forum and report
And the last thing is the power Hardware button fine ?? Although quite impossible , but the hardware power button might be faulty !!

ahmedrzvi said:
Is this phone Rooted? well try this pull the battery out put it back in, and press and hold volume down button and press power and see if you are able to get into boot loader...
Click to expand...
Click to collapse
No response from anything lol
mohnish.killer said:
two options
1- check bootloader (volume down + power) , if it gets a white screen with options , you can repair the device.
2- if it does not go into bootloader , then first download Htc sync for desire z , setup the android SDK , then plug ur phone inn, in command prompt , type *adb devices* .
If it shows a serial number below List Of Devices , then get back to this forum and report
And the last thing is the power Hardware button fine ?? Although quite impossible , but the hardware power button might be faulty !!
Click to expand...
Click to collapse
Wasnt able to get into bootloader and nothing showing in abd lol
I unsinstalled and removed the driver that it was showing as when i plugged it in and now it lists itself as QHSUSB_DLOAD
After googling around it says this can be fixed with jtagging, and i know someone who does that so gonna let him take a look lol
And i know the power button is working as it doesnt show up in device manager untill i press it

!
as always JTAG FTW !!

[Q] Samsung Wave 2 semibrick ?

Hi,
Since I tried to flash my Wave 2 (I didn't suceed, because the phone turned off before the end), my phone won't boot. Nothing displays when I just try to boot it, and when I plug it to computer, it displays a warning sign between a phone and a computer (I joined a pic of it), but the phone reboot approx every 20 sec displaying again this sign.
When it's pluged to computer and I press vol down, lock and deny call buttons, download mode appear for a few (1 or 2) sec then it reboot displaying the sign...
What could I do ? I think it might be a battery problem but it don't seems to load in this mode.
Thx in advance,
Bye.

Press Volup+Camera+Power button u should be able to get Download Mode
Then Flash again via Multiloader

Well, thank you for your answer, but I'm not able to go to download mode, because my phone just reboot half a sec after download mode displays.
What could I do ?

because my phone just reboot half a sec after download mode displays.
Click to expand...
Click to collapse
Battery damaged or empty...
Check battery.
Hint. In Download Mode you can NOT charge battery...
So check in other device or use other battery...
Good luck.
Best Regards

Hi,
Thanks for your help.
I finally managed charging my battery, and I tried to flash TurkoCFW, but it never works, I either get a "Error : FFS Write" or a "Error : CSC Write".
What could I do ?
Thanks in advance.

Ascend P6 only vibrates and no touch working

Hello all i need your help if anyone knows.. before some day i buy an Ascend P6 from Ali express and i asked about Greek Language and they say me that its with it. but when i received the phone No greek no Google Play.. i contact with seller and he send me step by step how to put new firmware with language and Google Play..
At the middle of upgrading the phone just turn off and now when i turn it on only vibrates all the time and the touchscreen dont respond.. only the side buttons Vol + - and Power the phone turn on normally and starts the android in Chinese language but i cant do nothing cuz no touch.
i tried to open it in recovery mode pressing Vol - vol + and power and there only vibrates and i cant see any SD card i do wipe factory and cash but the same... only Android recovery (3a)
and the phone never shut down when i keep pressing the power button the phone only restart and turn on again... i have to wait battery to go 0% and the phone shout down by self.
anyone help?

Absolut22 said:
Hello all i need your help if anyone knows.. before some day i buy an Ascend P6 from Ali express and i asked about Greek Language and they say me that its with it. but when i received the phone No greek no Google Play.. i contact with seller and he send me step by step how to put new firmware with language and Google Play..
At the middle of upgrading the phone just turn off and now when i turn it on only vibrates all the time and the touchscreen dont respond.. only the side buttons Vol + - and Power the phone turn on normally and starts the android in Chinese language but i cant do nothing cuz no touch.
i tried to open it in recovery mode pressing Vol - vol + and power and there only vibrates and i cant see any SD card i do wipe factory and cash but the same... only Android recovery (3a)
and the phone never shut down when i keep pressing the power button the phone only restart and turn on again... i have to wait battery to go 0% and the phone shout down by self.
anyone help?
Click to expand...
Click to collapse
It is vibrating at huawei's logo ? If yes then ur phone is bricked.
To install Firmware Download it from website. Through sdcard reader put update.app in dload folder in sd card. Now drain battery and charge. Insert sd card in phone. Press vol+ Vol- and power button. It will flash the firmware. Simple.......

hannanzikrea said:
It is vibrating at huawei's logo ? If yes then ur phone is bricked.
To install Firmware Download it from website. Through sdcard reader put update.app in dload folder in sd card. Now drain battery and charge. Insert sd card in phone. Press vol+ Vol- and power button. It will flash the firmware. Simple.......
Click to expand...
Click to collapse
i did it but the phone cant see the SD card. pressing vol+ vol - and power take me to android recovery (3a) and the only thing i can do there is to reboot system all other dont work...
and no is not vibrating at huawei's logo.. its vibrates from the moment i press power on button the phone start up normal takes me to the homescreen of the phone but i cant press nothing cuz only vibrates and no touch...

Absolut22 said:
i did it but the phone cant see the SD card. pressing vol+ vol - and power take me to android recovery (3a) and the only thing i can do there is to reboot system all other dont work...
and no is not vibrating at huawei's logo.. its vibrates from the moment i press power on button the phone start up normal takes me to the homescreen of the phone but i cant press nothing cuz only vibrates and no touch...
Click to expand...
Click to collapse
Then take it to service center. Can be hardware issue i think ..
Sent from my P6-U06 using xda premium

My grand stucks in Odin mode

Hi.. M using grand duos 4.2.2 official nonroot.
Wen i try 2 move in odin mode by pressin home+vol.down+power key, it prompts for vol.up key to continue, n wen I press it, it shows
' Downloading.. Dont turn off the target '
N doesn't response till long time. Just stucks here. Den i need 2 restart my phone.
Dis problem is since i bought my phone.
Please help me to get off frm dis problem.
D screen where it stucks in attached.

darpan1041 said:
Hi.. M using grand duos 4.2.2 official nonroot.
Wen i try 2 move in odin mode by pressin home+vol.down+power key, it prompts for vol.up key to continue, n wen I press it, it shows
' Downloading.. Dont turn off the target '
N doesn't response till long time. Just stucks here. Den i need 2 restart my phone.
Dis problem is since i bought my phone.
Please help me to get off frm dis problem.
D screen where it stucks in attached.
Click to expand...
Click to collapse
That's not a problem. It is supposed to do that. Odin mode is for flashing firmwares and recoveries among other things, and this screen is used to connect the root memory of your phone to your pc. That's why it's made so that your phone doesn't easily get turned off, because usually the reboot command comes after Odin finishes flashing
You can still reboot it by long pressing power button for a few seconds.
Again, this is in no way a problem.

Thanks