I previously managed to flash clockwork and sentinel. Now my recovery is corrupt and I cannot flash the recovery (or boot) .img..
I get the error 0X3000 remote fail when I try fastboot flash recovery recovery.img (the name of my ROM).
I cured this on the first install by fastboot erase cache. this now gives the error failed remote err )x 1900000
fastboot devices gives me the device name.
So my recovery is corrupt, and I want to flash a new recovery and then a new ROM.
Thanks
Fish
Managed to get recovery working but could not mount usb no drive E: error.
No backup either, even though i did one, files missing.
Tried to install zip, but lots of directories missing.
fishdude1 said:
I previously managed to flash clockwork and sentinel. Now my recovery is corrupt and I cannot flash the recovery (or boot) .img..
I get the error 0X3000 remote fail when I try fastboot flash recovery recovery.img (the name of my ROM).
I cured this on the first install by fastboot erase cache. this now gives the error failed remote err )x 1900000
fastboot devices gives me the device name.
So my recovery is corrupt, and I want to flash a new recovery and then a new ROM.
Thanks
Fish
Managed to get recovery working but could not mount usb no drive E: error.
No backup either, even though i did one, files missing.
Tried to install zip, but lots of directories missing.
Click to expand...
Click to collapse
Hi there, Which recovery u have u flashed? and with which recovery the backup u mentioned was taken?
SOLVED
keertikumar_ws said:
Hi there, Which recovery u have u flashed? and with which recovery the backup u mentioned was taken?
Click to expand...
Click to collapse
Recovery was clockworkMod (the version with chargimng and full USB).
I eventually rebooted my PC and could then erase cache, flash recovery again, mount USB from recovery and reflah boot, now alls well.
(Except no keyboard
So looks like the errors were PC related.
Ha..ha..okie...glad that its finally resolved
Thread #4
Sent from my HTC One X using XDA Premium 4 mobile app
hi
my huawei ascend p6 phone don't boot up and i cant reset the phone
went i re set
formatting/cache.....
data wipe complete.
E :failed to mount /cache (invalid argument)
E :failed to mount/data(invalid argument)
as shown in the picture attached
Can any help to find me a solution for this?
Try to reinstall your firmware via dload just search for a tutorial here on xda.
i tryed
taaeem said:
Try to reinstall your firmware via dload just search for a tutorial here on xda.
Click to expand...
Click to collapse
i try to re install your firmware,but it not working
can u send some details
sarathcskwi said:
i try to re install your firmware,but it not working
can u send some details
Click to expand...
Click to collapse
Okay download the B132 or B125 extract the archive and but the dload folder onto your SD card than reboot while holding power + vol+ + vol-. It should install the firmware right away. This will delete all your apps and app data. When this don't work try reformatting the SD card to FAT32 or use another SD card. That are all option I know for now.
hi
taaeem said:
Okay download the B132 or B125 extract the archive and but the dload folder onto your SD card than reboot while holding power + vol+ + vol-. It should install the firmware right away. This will delete all your apps and app data. When this don't work try reformatting the SD card to FAT32 or use another SD card. That are all option I know for now.
Click to expand...
Click to collapse
i already do this but it don't work .................i don't root my phone can i root this now?
sarathcskwi said:
i already do this but it don't work .................i don't root my phone can i root this now?
Click to expand...
Click to collapse
Push via adb a custom recovery : TWRP.
Put a custom ROM on your sdcard and flash it via TWRP. That will also root your device.
hi
I have the same problem some answers?
my huawei ascend p6 phone don't boot up and i cant reset the phone
went i re set
formatting/cache.....
data wipe complete.
E :failed to mount /cache (invalid argument)
E :failed to mount/data(invalid argument)
as shown in the picture attached
Can any help to find me a solution for this?
lasega said:
hi
I have the same problem some answers?
my huawei ascend p6 phone don't boot up and i cant reset the phone
went i re set
formatting/cache.....
data wipe complete.
E :failed to mount /cache (invalid argument)
E :failed to mount/data(invalid argument)
as shown in the picture attached
Can any help to find me a solution for this?
Click to expand...
Click to collapse
Try wiping the phone through fastboot and then try to flash the firmware with stock recovery. So get into bootloader mode (power+volume down untill it gets stuck on huawei ascend logo), connect it with pc and use fastboot commands to wipe all on phone, flash a stock recovery again with fastboot recovery, and then try to isntall the firmware with the recovery.
Sent from my SM-G850F
tileeq said:
Try wiping the phone through fastboot and then try to flash the firmware with stock recovery. So get into bootloader mode (power+volume down untill it gets stuck on huawei ascend logo), connect it with pc and use fastboot commands to wipe all on phone, flash a stock recovery again with fastboot recovery, and then try to isntall the firmware with the recovery.
Sent from my SM-G850F
Click to expand...
Click to collapse
a tutorial?
I'm sorry to tall but your phone is now like mine its hard bricked internal storage is dead you need to change motherboard
you give the good answer hard bricked,,,,,,,,,,,, yes hard bricked,,,,,,, if you can wipe your phone and do formating and it give answer ,,,,FAIL,,,,,, then its mean hardware problem,,,,,,,,,, firmware can not be installed,,,,,,
qazifakeera said:
you give the good answer hard bricked,,,,,,,,,,,, yes hard bricked,,,,,,, if you can wipe your phone and do formating and it give answer ,,,,FAIL,,,,,, then its mean hardware problem,,,,,,,,,, firmware can not be installed,,,,,,
Click to expand...
Click to collapse
I have the same problem with my huawei ascend p6
have you unlock the bootloader? take a look at this link : http://forum.xda-developers.com/showthread.php?t=2682979
Good luck.!
link dead
Long story short, I installed CWM and then downloaded one of the ROMS from this site.
It failed and now the phone is constantly stuck on the Huawei Logo.
I have put what i believe to be an official rom (B510.zip) on my sd card and booted into recovery using the power on and + volume.
I have then tried to install it but receive an error:
Status 7 failed to stat "/system/build.prop" No such file or directory
Installation aborted.
Please can anyone help?
daniel.locke6 said:
Long story short, I installed CWM and then downloaded one of the ROMS from this site.
It failed and now the phone is constantly stuck on the Huawei Logo.
I have put what i believe to be an official rom (B510.zip) on my sd card and booted into recovery using the power on and + volume.
I have then tried to install it but receive an error:
Status 7 failed to stat "/system/build.prop" No such file or directory
Installation aborted.
Please can anyone help?
Click to expand...
Click to collapse
Hello !
Sorry to say, you have a duty to be informed, before take the actions on your device
Now is to late, but next time, take time to documenting yourself to avoid any issues .
First, here is no working CWM for our P6 - you must use TWRP .
Second , if you have already a custom recovery installed on your device, you cannot flash a Stock Huawei Firmware !
On Generals or Q&A forum for P6 you will find all you need .
Best regards !
surdu_petru said:
Hello !
Sorry to say, you have a duty to be informed, before take the actions on your device
Now is to late, but next time, take time to documenting yourself to avoid any issues .
First, here is no working CWM for our P6 - you must use TWRP .
Second , if you have already a custom recovery installed on your device, you cannot flash a Stock Huawei Firmware !
On Generals or Q&A forum for P6 you will find all you need .
Best regards !
Click to expand...
Click to collapse
Hindsight is a great thing, but of course this does not fix my problem.
I have managed to connect to the phone via fastboot. I have downloaded what I believe to be a stock rom and tried to flash the boot.img: fastboot flash boot boot.img
FAILED (remote: partition does not exist)
I have also tried to flash system.img: fastboot flash system system.img
FAILED (remote: data too large)
Do you have a fix for this?
I have found a fix
Okay,
So I have actually found a fix for this problem.
If any user is facing the same problem as me; where they are just stuck on the huawei logo here is my fix:
Put the phone into fastboot mode: Power and Volume down (the phone has to be connected via USB)
Open fastboot: fastboot devices (this checks that the device is connected)
fastboot flash recovery recovery.img (I go this by downloading the stock rom from huawei's site and then extracted the recovery.img using the huawei update extractor).
The reason I had to reflash the recovery was because it was corrupt and I could not access it.
Finally, once this was complete, I then took out the sd card from the phone, made a folder within it called dloader and put in the UPDATE.APP from the extracted zip rom file (downloaded from huawei's site) )
I then turned the phone off and then loaded into recovery mode. This mode automatically then looks for the dloader folder, in which it located the UPDATE.APP.
The install then began, and after about 10 minutes the phone was no longer SOFT Bricked.
Merry Christmas to everyone!
I was trying to flash a new ROM to my X800 with TWRP v. 2.8.7.0 but by mustake i wipe the internal memory!
After that somhow i erase the TWRP also!!
So now i have only the stock recovery mode and i have stuck in the recovery screen because the phone is empty i suppose...
How can i save it and load a new ROM ??
When i press vol- & power i see the penguin icon and i hear a sound from my laptop but it is recognized as a non-defined android device...
Any help??
sakout said:
Merry Christmas to everyone!
I was trying to flash a new ROM to my X800 with TWRP v. 2.8.7.0 but by mustake i wipe the internal memory!
After that somhow i erase the TWRP also!!
So now i have only the stock recovery mode and i have stuck in the recovery screen because the phone is empty i suppose...
How can i save it and load a new ROM ??
When i press vol- & power i see the penguin icon and i hear a sound from my laptop but it is recognized as a non-defined android device...
Any help??
Click to expand...
Click to collapse
After many tries i manage to reload TWRP 3.0.2-0
I download a ROM ( 1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S ) and i try to install it from the install menu.
When the operation finishes and try to reboot system the phone enter again in Recovery mode...
Any help?
sakout said:
After many tries i manage to reload TWRP 3.0.2-0
I download a ROM ( 1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S ) and i try to install it from the install menu.
When the operation finishes and try to reboot system the phone enter again in Recovery mode...
Any help?
Click to expand...
Click to collapse
Try to install original CN 20s from here: https://www.mediafire.com/file/3ktjygl15282hr6/X1_X800-CN-FN-BEXCNFN5902012221S-5.9.020S.zip/file
It will erase everithing! also recovery! so you will need to install TWRP again after this. It contains also firmware!
Here is also Cuoco92's tool v2: https://www.mediafire.com/file/6hs8fr17bioxxf9/Le1Pro_CN_CUOCO92_TOOLS_v2.7z/file
For transfering files to phone you can use an OTG cable +USB stick or through adb: https://www.themefoxx.com/2018/06/adb-file-copy-android.html
I'm not sure if anyone can help me-a long time ago I stupidly formatted my G6 edge using TWRP. Now that obviously wiped everything. Well I need a backup phone and I can't get odin to flash the firmware no matter what I try. I have even tried to flash some files individually either through odin or adb sideload-including the firmware-to no avail.
What Rom Ver.
I have stock 7.0 but i did a nand wipe before i put it on and my custom boot screen is still there (alienware) its bugging on diagmon random reboots and vol up, home key, power to bootloader brings up a android says updating but doesnt then goes to a fail android then to Android Recovery apply from SD card =E:failed to stat /dev/block/sdb1
E:failed to mount /sdcard (No such file or directory) --Couldn't mount /sdcard otherwise no other bugs i know of. I cant get my TWRP back it wiped it I try in ODIN but all hangs or fails with some weird asian letters after english