hello folks...
can anybody suggest or provide some build.prop tweaks for longer battery life..
kantry123 said:
hello folks...
can anybody suggest or provide some build.prop tweaks for longer battery life..
Click to expand...
Click to collapse
Here are the main ones.
Code:
# Time between Access Points scans
# Increase seconds to minimize battery drain
wifi.supplicant_scan_interval = 180
# LCD Brightness Setting Default is 143
settings.display.brightness = 120
# ARM11 Sleep Mode
# 0 = Power Collapse Suspend
# 1 = Power Collapse
# 2 = Apps Sleep
# 3 = Slow Clock and Wait for Interrupt
# 4 = Wait for Interrupt
pm.sleep_mode = 1
# HSDPA Low Throughput
ro.ril.disable.power.collapse = 0
Tera Tike said:
Here are the main ones.
Code:
# Time between Access Points scans
# Increase seconds to minimize battery drain
wifi.supplicant_scan_interval = 180
# LCD Brightness Setting Default is 143
settings.display.brightness = 120
# ARM11 Sleep Mode
# 0 = Power Collapse Suspend
# 1 = Power Collapse
# 2 = Apps Sleep
# 3 = Slow Clock and Wait for Interrupt
# 4 = Wait for Interrupt
pm.sleep_mode = 1
# HSDPA Low Throughput
ro.ril.disable.power.collapse = 0
Click to expand...
Click to collapse
thanks for ur reply...
but will it work with HTC wildfire s a510e(GSM)...?
kantry123 said:
thanks for ur reply...
but will it work with HTC wildfire s a510e(GSM)...?
Click to expand...
Click to collapse
Yes.
On average how much longer has this increased battery life ?
Sent from my HTC_A510c using XDA App
junxracr said:
On average how much longer has this increased battery life ?
Sent from my HTC_A510c using XDA App
Click to expand...
Click to collapse
On one phone with data, wifi, bluetooth and sync enabled get about two days plus. On the other one with just the phone on I get about 4 plus days. So it will vary...
Thank you I'll give it a try.
Sent from my HTC_A510c using XDA App
I'm bumping this - anybody else got any other interesting tweaks?
Sent from my Wildfire S A510e using xda premium
To help with touch responsiveness...
CHANGE:
Code:
view.touch_slop = 2
ADD:
Code:
# Force Launcher into Memory
ro.HOME_APP_ADJ = 1
# Enable Graphic Processor Unit
debug.sf.hw = 1
# Improve Overall Touch Responsiveness
debug.performance.tuning = 1
video.accelerate.hw = 1
# Improve Scrolling Responsiveness
windowsmgr.max_events_per_sec = 150
Tera Tike said:
To help with touch responsiveness...
CHANGE:
Code:
view.touch_slop = 2
ADD:
Code:
# Force Launcher into Memory
ro.HOME_APP_ADJ = 1
# Enable Graphic Processor Unit
debug.sf.hw = 1
# Improve Overall Touch Responsiveness
debug.performance.tuning = 1
video.accelerate.hw = 1
# Improve Scrolling Responsiveness
windowsmgr.max_events_per_sec = 150
Click to expand...
Click to collapse
thanks but would u suggest any thing with max and min fling velocity..?
kantry123 said:
thanks but would u suggest any thing with max and min fling velocity..?
Click to expand...
Click to collapse
For me not really, the Minimum fling velocity is measured by the number of pixels your finger traveled per second.
You can lower the view.minimum_fling_velocity = 15 to speed up scrolling.
I would not even set the maximum velocity as the screen is to small for it to be effective.
Tera Tike said:
For me not really, the Minimum fling velocity is measured by the number of pixels your finger traveled per second.
You can lower the view.minimum_fling_velocity = 15 to speed up scrolling.
I would not even set the maximum velocity as the screen is to small for it to be effective.
Click to expand...
Click to collapse
thank u so much for ur valuable answer...!
but can u clarify my doubt..??
below i'm posting some tweaks will that work on wfs.?
ro.mot.eri.losalert.delay=1000
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
dalvik.vm.dexopt-flags=m=v,o=y
persist.sys.purgeable_assets=1
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode = hibernate
ro.config.hw_power_saving=true
debug.kill_allocating_task=0
debug.qctwa.statusbar=1 (qualcomm device specific)
debug.qctwa.preservebuf=1 (qualcomm device specific)
debug.qc.hardware=true (qualcomm device specific)
com.qc.hardware=true (qualcomm device specific)
plz.z..z won't mind if i have botherd u but.. seriously i'm in need of those tweaks..??
kantry123 said:
thank u so much for ur valuable answer...!
but can u clarify my doubt..??
below i'm posting some tweaks will that work on wfs.?
ro.mot.eri.losalert.delay=1000
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
dalvik.vm.dexopt-flags=m=v,o=y
persist.sys.purgeable_assets=1
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode = hibernate
ro.config.hw_power_saving=true
debug.kill_allocating_task=0
debug.qctwa.statusbar=1 (qualcomm device specific)
debug.qctwa.preservebuf=1 (qualcomm device specific)
debug.qc.hardware=true (qualcomm device specific)
com.qc.hardware=true (qualcomm device specific)
plz.z..z won't mind if i have botherd u but.. seriously i'm in need of those tweaks..??
Click to expand...
Click to collapse
Here is the list of what I am using...
Code:
# View configuration for QVGA
ro.min.fling_velocity=10
# Decrease Dialing Delay
ro.telephony.call_ring.delay = 0
# Fix Blackscreen Issue after Call
ro.lge.proximity.delay = 5
mot.proximity.delay = 5
# Dalvik Cache Settings
dalvik.vm.dexopt-flags = v=n,o=a,u=y
# Application Not Responding Timeout
keydispatchtimeout = 15000
# Qualcomm UI Tweaks
debug.qctwa.preservebuf = 1
debug.qc.hardware = true
# Improves Radio Signal
ro.config.hw_fast_dormancy = 1
I would not use these as they was not needed, degraded or bootlooped my device.
Code:
# Maximum Velocity to Initiate a Fling (measured pixels per second)
ro.max.fling_velocity = 12000
# Cellular Tower Reconnect Delay (Made Hotspot Mode Unstable)
ro.mot.eri.losalert.delay = 1000
# Purge Memory Cache Memory on reboot (UI already does that)
persist.sys.purgeable_assets = 1
# Dalvik Cache Settings (degraded performance)
dalvik.vm.dexopt-flags=m=v,o=y
# Disable Graphic Dithering (default setting)
persist.sys.use_dithering = 0
# Power Off Mode Hibernate
persist.sys.shutdown.mode = hibernate
# Enable Hardware Power Savings (not supported)
ro.config.hw_power_saving = true
# Enhanced Operator Name String
persist.cust.tel.eons = 1
# Disable Task Killing
debug.kill_allocating_task = 0
# Qualcomm UI Tweaks (Made no differance)
debug.qctwa.statusbar = 1
com.qc.hardware = true
Hi, I made this kernel and had released local community in Korea.
Now, I decided to release here.
If you use my kernel and get any problems, please give me feedback!
Features :
- Based on AOSP Kernel Source (Linux Kernel 3.0.61) (JellyBean 4.2.X & 4.1.2)
- Any Kernel format (Thanks to Koush)
- In Cleaner.sh (Thanks to Ezekeel and Modified to Me)
- Governor : ZenX, Lazy, Nightmare, PegasusQ, Interactive, , Intellidemand, InteractiveX, Wheatley, Lazy, Ondemand, Hotplug, Conservative, Dyanmic Interactive
- Scheduler : ROW, Simple I/O, BFQ v5, Deadline, Cfq, V(R), NOOP
- Overclockable to 1.8Ghz
- Userspace Voltage ! Thanks to Michael Huang
: adjusted voltage
- Support Slide2Wake (PGM2 Nexus: http://forum.xda-developers.com/showthread.php?p=27650753 / App(Market): https://play.google.com/store/apps/details?id=net.ponury.pgm2free)
- Vibrate Control
[Ezekeel's Mods ~]
- Color Control (Ezekeel & Supercurio)
- Sound Control (Ezekeel & Greg White)
- WiFi Power Mode Control
[~ Ezekeel's Mods]
- Built Toolchain with Linaro gcc 4.7.2
- Backported AIO from Linux 3.5
- Backported Lowmemorykiller from Linux 3.5
- Backported ZRAM from Linux 3.2
- Backport CPUFreq from Linux 3.2
- Backport KSM from Linux 3.5
- USB Fast Charge (Thanks to Chad0989)
- SLUB Memory Allocator, Joe's Tiny RCU
- Optimized CRC32 and ARM RWSEM Algorithm (Thanks to Ezekeel)
- CIFS, NTFS, TUN(Built-in) Support
- Disabled fsync()
- More Performance TWEAKS !!
- Great Battery Life !!
- Etc ...
Thanks to Ezekeel, Michael Huang, Koush, imoseyon, franciscofranco, faux123, ch33kybutt, Chad0989 !!!
[4.2.1] JellyBean Weekly Version :
#510 (01-29-2013 KST / GMT +9:00)
http://air.sloud.kr/2013/01/air-kernel-weekly-510-for-gn-42x-jb.html
[4.2.X] JellyBean Stable Version :
Not release
[4.1.2] JellyBean Final Version :
Final Build (12-01-2012 KST / GMT +9:00)
http://air.sloud.kr/2012/12/air-kernel-final-build-for-gn-jb-41x.html
[4.1.2] JellyBean Weekly Version :
#330 (11-18-2012 KST / GMT +9:00)
http://air.sloud.kr/2012/11/air-kernel-weekly-330-for-gn-jbn.html
Source
Donate Me
※ Read Me !!
- Download fails when you're using STOCK browser !!
: System Settings -> Apps -> ALL -> Download Manager -> Clear Data (Thanks to mobile_pc !!!)
- If BLN Led Timeout doesn't work, check the NSTools Service. (v1.13)
[4.2] Change Log :
Weekly #510 (01-29-2013 KST / GMT +9:00)
-Update Linux 3.0.61
-Add ARM cpu topology (default: Enable)
-Add V(R) and NOOP schedulers
-Tuning Deadline, SIO and VR schedulers
-Allow non superusers to change i/o scheduler (Thanks to imoseyon)
-Optimize network speed and etc...
-Reduce Boot Image size (4.55MB -> 3.68MB)
Weekly #500 (01-26-2013 KST / GMT +9:00)
-Update Linux 3.0.60
-Add 1482Mhz MPU Clock
-Add Morfic's Vibrator Control and remove Ezekeel's Vibrator Control
-Optimize mm:writeback (https://github.com/edoko/AirKernel_GN_JB/commit/17cf75b860822b44410b5e84082f311dd86e7d40)
-ipv4: save cpu cycles from check_leaf() (from Linux 3.8)
-Fix interactive permission error
Weekly #491 (01-20-2013 KST / GMT +9:00)
-Update Linux 3.0.59
-Add Lazy and ZenX v2.2 governors
-Add SMOOTH_UI for Lazy governor
-Update PegasusQ and Nightmare governors
-Update the latest BCMDHD Wi-Fi drivers
-Fix Wheatley governor
-mmc: core: Fix possbile memory leak
-Increase some performance
Weekly #483 (01-13-2013 KST / GMT +9:00)
-Fix PGM problems
Weekly #481 (01-12-2013 KST / GMT +9:00)
-Update Linux 3.0.58
-Add Nightmare governor
-Adjust Display colors
-Update the latest 'interactive' and 'intellidemand' governors
-Fix hotplug for PegasusQ governor
-Support OTG mount
-Increase some device performance
Weekly #470 (01-06-2013 KST / GMT +9:00)
-Update the latest Interactive governor from android-3.4 branch
-Increase some performance
Weekly #465 (12-31-2012 KST / GMT +9:00)
-Fix SoD and some lags (ing..)
-cpufreq_interactive.c: Rollback #440
Weekly #460 (12-29-2012 KST / GMT +9:00)
-Fix freezing bugs (revert 3 commits)
-Optimize mm/vmscan.c (7 commits)
-Add OTG Host Mode On Charge: Version 3
-Update the latest 'interactive governor' from android-3.4 branch (1 commit)
-Boottime: A tool for automatic measurement of kernel/bootloader boot time
-time: cast ->raw_interval to u64 to avoid shift overflow
-intellidemand: tweaked hysteresis value for better UI response
-Interactivce, InteractiveX: some tweaks
Weekly #451 (12-25-2012 KST / GMT +9:00) Merry Christmas
-Update Linux 3.0.57
-Fix max clocks bugs (1.35Ghz ~ 1.8Ghz)
-Fix screen off clock
-Add ROW Scheduler v4
-Update the latest 'Interactive governor' from android-3.4 branch (8 commits)
-Update the latest 'BCMDHD (Wi-Fi)' from android-3.0 branch (1 commits)
-Increase VM_MIN_READAHEAD value from 16 to 32
-Tweak the Interactive governor
-Adjust some MPU Voltages
-Merge fbdev fixes for 3.6.1
-hardlockup: detect hard lockups without NMIs using secondary cpus
-Cleaning from touch_watchdog_notifier_head (Thanks to anarkia1976)
Weekly #440 (12-17-2012 KST / GMT +9:00)
-Fix the screen off max freq
-Update the latest 'Interactive governor' from android-3.4 branch
-Update the latest 'BCMDHD (Wi-Fi)' from android-3.0 branch
Weekly #431 (12-12-2012 KST / GMT +9:00)
-Update Linux 3.0.56
-Fix Max clock bugs
-Support CIFS (Common Internet File System) / built-in
-Add Adaptive, AdaptiveX governors (Thanks to ZEN Kernel developer)
-Add WiFi Power Mode option (default: off)
-Revert "Add some THUMB2 code for _uldivmod"
-Revert "Disable FIQ Debugger"
-Revert "OMAP2+: clock: Round clock to the closest possible frequency."
Weekly #422 (12-06-2012 KST / GMT +9:00)
-Update Linux 3.0.55
-Add GPU Clock option (307, 384, 512Mhz) -Thanks to imoseyon
GPU Clock settings - TricksterMod App
-Adjust min clock from 236Mhz to 364Mhz
-Adjust MPU voltages and margins
-Remove FIFO Scheduler
Weekly #419 (12-02-2012 KST / GMT +9:00)
-Fix bootloop from CM 10.1
-mm.h: Increase readahead from 768 to 1024
Weekly #416 (12-02-2012 KST / GMT +9:00)
-opp4xxx_data.c: Fix GPU OC define.
-opp4xxx_data.c: Increase some MPU Voltages
-opp4xxx_data.c: Incrase 236Mhz margin from 0 to 10000(10mV)
-opp4xxx_data.c: Increase 364Mhz, 598Mhz from 0 to 10mV
-mm.h: Decrease readahead value from 2048 to 768
Weekly #411 (12-01-2012 KST / GMT +9:00)
-Update Linux 3.0.53
-Support CM 10.1
-Add MPU 598Mhz clock
-Change MPU clock from 230Mhz to 236Mhz and 384Mhz to 364Mhz
-Change default min clock: 364Mhz to 236Mhz
-cpufreq_interactive.c: Remove input_boost_freq
-Add Intellidemand v3.2 governor
-Add FIFO scheduler
-Update Linaro toolchain 4.7.3-2012.11.23
-Merge the latest 'ipv4' commits from 'android-3.0' branch
-Merge the latest 'interactive' governor from 'android-3.4' branch
-Enable KSM, ZRAM and CleanCache
-Backport ZRAM from Linux 3.3.x
-Backport KSM from Linux 3.6.8
-Backport AIO from Linux 3.6.x
-Enable TCP Advanced (Cubic, WestWood, Veno, Hybla)
-Increase performance ...
-Etc ...
Weekly #400 (11-25-2012 KST / GMT +9:00)
-Rebase 4.2 kernel source
-Start version : #400
Re-add features from Air Kernel Jellybean 4.1.X (↓↓↓)
-Update Linux 3.0.52
-board-tuna-connector.c: Fix Dock bugs
-Adjust Display Colors
-color_control.c: Disable color safety
-Added Color Control version 4.
-Add PegasusQ governor, OndemandX, Sakuractive and InteractiveX v2 governors
-cpufreq_ondemand.c: some tweaks
-Adjust input_boost_freq to 702Mhz
-Merge the latest Interacitve governor patches from android-3.4 branch
-cpufreq: interactive: add input_boost_freq entry. This entry is the frequency which the CPU will be boosted when the screen is touched. It's user configurable from userspace and it needs to match the entries in the frequency table.
-cpufreq: interactive: change frequency up/down kernel thread priority. Now it has more priority than any user thread which should boost interactivity.
-cpufreq: separate Interactive governor into two, one with static settings and another one with dynamic settings (it adjusts itself according to load). The new governor is called Dynamic Interactive.
-Add BFQ v5 and Disable NOOP
-Set the bfq_slice_idle value 0. Thanks to franciscofranco.
-Enable Open Switch Retention in the C4 state for the MPU -from Ezekeel
-Added Battery Life eXtender (BLX) version 1.
-Added FSync Control version 1.
-Add MPU clocks and adjust min/max clocks
-board-tuna-sensors.c: Correct compass for toroplus -KalimochoAz
-Backport Lowmemorykiller from Linux 3.5
-arm/crypto: Add optimized AES and SHA1 routines Add assembler versions of AES and SHA1 for ARM platforms. This has provided up to a 50% improvement in IPsec/TCP throughout for tunnels using AES128/SHA1.
-OMAP2+: clock: Fix DPLL clock rounding
-block: deadline: disable front_merging.
-slub: zero page to fix boot crashes
-Reduced Android Logger RAM usage. TNX to [email protected] for point.
-omap4: cpuidle: Some obvious optimisations to the code path
-omap44xx: cpuidle: Update target residencies to saner values
-cpuidle: Add last_residency trace event for residency profiling
-OMAP4: cpuidle: don't touch mpu and core state until CPU1 is off
-Proportional Rate Reduction for TCP.
-Revert "OMAP3630+: SmartReflex 1p5: remove voltage clamp down" This reverts commit afadff82e7b2041498c95f266b76b21dda04e703.
-mm.h: Increase readahead value from 128 to 2048
-sched/nohz: Fix rq->cpu_load[] calculations
-Add Morfic's contrast control
-omap4_trim_quirks.c: Enable trim override
-Tune deadline for flash devices
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-tuna-wifi: do not randomize MAC if bootloader doesn't pass it
-board-tuna: VAUX3 and VUSIM voltage tweak
-edoko: omap_temp_sensor.c: Increase the temperature threshold
-OMAPDSSISPC: Gamma feature implementation
-omap2plus-cpufreq.c: Decrease CPU transition latency value of 30ms
-Added kernel config option 'BCMDHD_WIFI_PM'.
-Added simple sysfs interface to force adapters that are detected as USB to charge as AC.
-Clock rate for dpll_core_m6x2_ck for OPP100 should be exactly 266666666 = 1600000000 / 6 (266600000 is rounded down to 228571428 = 1600000000 / 7).
-Never append '+' symbol to kernel version string.
-Joe Korty: RCU: Joe's RCU
-Added optimized CRC32 algorithm.
-Added optimized ARM RWSEM algorithm.
-Added CPUfreq governor 'wheatley'.
-Added Sound Control version 1.
-Added Vibrator Control version 1.
-Added Simple I/O (SIO) scheduler.
-Added Custom Voltage version 3.
-slub: set slub_max_order to 0
-lib/memcopy: use glibc version
-lib/string: use glibc version
-Support compressed XZ
-sched: don't call task_group() many times in set_task_rq()
-sched_fair.c: Optimize latency values
-Optimize build option
-Add toolchain path and gitignore
-For more information, https://github.com/edoko/AirKernel_GN_JB/tree/4.2
[4.1.2] Change Log :
Final Build (12-01-2012 KST / GMT +9:00)
-Final Build - 4.1.X
-Update Linux 3.0.53
-Merge ipv4 commits from 'android-3.0' branch
-Merge interactive governor from 'android-3.4' branch
-Enable ZRAM and CleanCache
-Backport ZRAM from Linux 3.3.x
-Update Linaro toolchain 4.7.3-2012.11.23
Stable r5 (11-25-2012 KST / GMT +9:00)
-Stable Build r5
-Update Linux 3.0.52
-Fix PGM module error
-OMAP2+: clock: Fix DPLL clock rounding
-block: deadline: disable front_merging
-Increase readahead value from 1024 to 2048
-Enable RT_STATS option
-slub: zero page to fix boot crashes
-irq: Set CPU affinity as soon as the irq thread is created
-SCHEDULER: Autogroup patch group by current user android UID instead of task ID
-cpufreq: interface for setting governor for a cpu
-wakeup: Use irqsave/irqrestore for events_lock
-x86,mm: make pagefault killable
-ARM: 7178/1: fault.c: Port OOM changes into do_page_fault
-readahead: fault retry breaks mmap file read random detection
-time: RCU permitted to stop idle entry via softirq
-sched: Prevent wakeup to enter critical section needlessly
-procfs: add num_to_str() to speed up /proc/stat
-rq_stats: add run queue statistic collection to kernel tick scheduler
-Fix freezing when user select some governors
-cpuidle: Add last_residency trace event for residency profiling
-omap44xx: cpuidle: Update target residencies to saner values
-cpufreq_interactive.c: Fix hispeed and input boost frequency
-cpufreq: Tweak interactive, ondemand governors
-Reduced Android Logger RAM usage. TNX to [email protected] for point.
-Fix SoD from some devices
-Makefile: Optimizing CFLAGS
-Update Sync from android-3.4 branch
-Update Interactive governor from android-3.4 branch
-Reduce MPU Voltages
-Disable userspace, powersave and smartassv2 governors
-Change TCP Configuration from Cubic to Westwood
Weekly #330 (11-18-2012 KST / GMT +9:00)
-Support JellyBean 4.2
-Update Linux 3.0.52
-Reduce MPU Voltages
-Disable userspace, powersave and smartassv2 governors
-Change TCP Configuration from Cubic to Westwood
Weekly #321 (11-10-2012 KST / GMT +9:00)
-Update Linux 3.0.51
-Fix SoD from some devices
-Makefile: Optimizing CFLAGS
-Update Sync from android-3.4 branch
-Update Interactive governor from android-3.4 branch
Weekly #311 (11-03-2012 KST / GMT +9:00)
-Update Linux 3.0.50
-Fix freezing when user select some governors
-cpuidle: Add last_residency trace event for residency profiling
-omap44xx: cpuidle: Update target residencies to saner values
-cpufreq_interactive.c: Fix hispeed and input boost frequency
-cpufreq: Tweak interactive, ondemand governors
-Reduced Android Logger RAM usage. TNX to [email protected] for point.
Weekly #300 (10-29-2012 KST / GMT +9:00)
-Update Linux 3.0.48
-Increase readahead value from 1024 to 2048
-Enable RT_STATS option
-slub: zero page to fix boot crashes
-irq: Set CPU affinity as soon as the irq thread is created
-SCHEDULER: Autogroup patch group by current user android UID instead of task ID
-cpufreq: interface for setting governor for a cpu
-wakeup: Use irqsave/irqrestore for events_lock
-x86,mm: make pagefault killable
-ARM: 7178/1: fault.c: Port OOM changes into do_page_fault
-readahead: fault retry breaks mmap file read random detection
-time: RCU permitted to stop idle entry via softirq
-sched: Prevent wakeup to enter critical section needlessly
-procfs: add num_to_str() to speed up /proc/stat
-rq_stats: add run queue statistic collection to kernel tick scheduler
Weekly #291 (10-22-2012 KST / GMT +9:00)
-Update Linux 3.0.47
-Fix PGM module error
-OMAP2+: clock: Fix DPLL clock rounding
-block: deadline: disable front_merging
Stable r4 (10-21-2012 KST / GMT +9:00)
-Stable Build r2
-Update Jellybean 4.1.2
-Update Linux 3.0.46
-Update BFQ v5 Scheduler
-Update Interactive governor
-Update Wi-Fi drivers for Jellybean 4.1.2
-Update Linaro ToolChain 4.7.2/2012.09
-Add Sync patches from Android 3.4
-Add LowMemoryKiller from Android 3.4
-Add BFQ Tweak. Thanks to franciscofranco.
-Enable TCP Advanced and Add WESTWOOD, HYBLA and VENO Options.
-Enable ARM_PATCH_PHYS_VIRT.
-Disable ZRAM and XVMALLOC
-KSM: Change value of sleep millisecs
-ETC ...
#283 Weekly (09-30-2012 KST / GMT +9:00)
-Add Dynamic Interactive governor (https://github.com/edoko/AirKernel_GN_JB/commit/8329298ed056c8768828b6d63da4684b81335b5d)
-cpufreq: interactive: add input_boost_freq entry. This entry is the frequency which the CPU will be boosted when the screen is touched. (https://github.com/edoko/AirKernel_GN_JB/commit/c3e6a7431c334d96217850c0b0392fdfec665222)
-Update Interactive governor (Thanks to franciscofranco)
-Update the latest Wi-Fi driver
-Merge 'android-3.0' branch
#273 Weekly (09-16-2012 KST / GMT +9:00)
-Update Linux 3.0.43
-Update the latest Wi-Fi drivers for BCMDHD
-cpufreq: interactiver governor: Add a time view concept
-cpufreq: interactive governor: Fix not uniform buf filling & memory corruption
-cpufreq: interactive: take idle notifications only when active
-cpufreq: interactive: keep freezer happy when not current governor
-cpufreq: interactive: handle speed up and down in the realtime task
-cpufreq: interactive: remove input_boost handling
Stable r3 (09-02-2012 KST / GMT +9:00)
-Stable Build #3
-Update Linux 3.0.42
-Adjust MPU Clocks and Voltages
-Adjust Readahead value from 2048 to 1024
-Add the latest Wi-Fi Driver patch
-Add optimized AES and SHA1 routines (https://github.com/edoko/AirKernel_GN_JB/commit/69d4d7e0c0b334513a8838813541a5bd99df9aa8)
-Merge the latest 'android-omap-3.0' branch
-Adjust Hotplug clocks for PegasusQ governor
-Change hispeed_freq and Adjust MIN_SAMPLE_TIME and TIMER_LATE for Interactive governor
-Change suspendfreq from 720Mhz to 1026Mhz for InteractiveX governor
-Revert "sched: Folding nohz load accounting more accurate" commits
-Remove 89airtweaks script.
-Please use Trickster Mod App. Thanks to bigeyes0x0! (Link : http://forum.xda-developers.com/showthread.php?t=1768315)
#260 (08-25-2012 KST / GMT +9:00)
-sched: Remove stale power aware scheduling remnants and dysfunctional knobs
-Revert "OMAP3630+: SmartReflex 1p5: remove voltage clamp down"
-Add the latest BCMDHD(Wi-Fi) patch
#251 (08-19-2012 KST / GMT +9:00)
-Add Ezekeel's Custom Voltage v3
-cpufreq_interactive.c: Change hispeed clock from max clock to 1050Mhz
-Disable FRAME POINTER
-Disable NOOP scheduler
-Default Scheduler: BFQ v4
#241-STABLE_r2 (08-18-2012 KST / GMT +9:00)
-STABLE r2 - #241
-Update Linux 3.0.41
-Add ext4 tweaks
-Add the latest BCMDHD(Wi-Fi) patch
-Add the latest patch in android-omap-3.0
-Enable FSync (more safety)
-Default governor: Interactive
-cpufreq_interactive.c: Change hispeed_freq from max clock to 720Mhz
#237 (08-14-2012 KST / GMT +9:00)
-More tweaks PegasusQ and Interactive governor
-Change build flags
-Tweak some BFQ parameters to be more flash memory alikes -franciscofranco
#231 (08-13-2012 KST / GMT +9:00)
-Add BFQ v4 Scheduler
-Add OndemandX governor
-Decrease 230Mhz voltage
-Etc...
#223 (08-11-2012 KST / GMT +9:00)
-Update Linux 3.0.40
-Adjust Display Colors
-cpufreq_pegasusq: More tweaks -gokhanmoral and me
-cpufreq_interactive.c: Increase DEFAULT_TIMER_RATE from 20 to 30
-cpufreq_interactiveX.c: Tweak and fix freq
-OMAPDSS: DISPC: fix pclk divisor limits
-OMAPDSS: DISPC: more precise scale limits checking
#212 - Stable (08-02-2012 KST / GMT +9:00)
-#212 is STABLE version
-Update Linux 3.0.39
-VFP Build Optimization
-ondemand: update sampling rate without waiting for next sampling
-Backport CPUFreq from Linux 3.2 (latest)
-Backport KSM from Linux 3.5 (latest)
-Backport AIO from Linux 3.5 (latest)
-Enable NTFS_FS and NTFS_RW option (built-in)
-Built-in CIFS and SCSI_WAIT_SCAN modules
-sched: Folding nohz load accounting more accurate
-Correct compass for toroplus -KalimochoAz
-Do not leak some sensitive kernel parameters -renaudallard
-Add More Patch...
#200 (07-29-2012 KST / GMT +9:00)
-Change Toolchain from Linaro 4.6.4 to Linaro 4.7.2 (lastest)
-Enable ZRAM and XVMALLOC
-Backport ZRAM from Linux 3.2 (lastest)
-Backport Lowmemorykiller from Linux 3.5 (lasteset)
-Add InteractiveX V2 governor -imoseyon
-Add V(R) Scheduler
-Add Proportional Rate Reduction for TCP (from Linux 3.2 commit)
#191 (07-28-2012 KST / GMT +9:00)
-Update Linux 3.0.38
-Increase readahead value from 1024 to 2048
-x86: Call idle notifiers
-net: wireless: bcmdhd: Fill station_info packet fields
-Change Display color values and gamma offsets
#180 (07-22-2012 KST / GMT +9:00)
-opp4xxx_data.c: Adjust voltages
-Revert "board-tuna-wifi.c: Decrease WiFi Startup delay from 70ms to 35ms
-Revert "net: wireless: bcm4329: Init locks in dhd_attach() at the beginning"
-Fix battery drain, SoD
-Revert "OMAP4: hsmmc: fix race conditions in suspend/resume path"
-Revert "OMAP: mcspi: Perform NULL pointer check before accessing cd->swap_datalines"
#177 (07-21-2012 KST / GMT +9:00)
-cpufreq_pegasusq.c: Adjust hotplug frequency for GNex
-Add 230Mhz MPU Clock
-board-tuna-wifi.c: Decrease WiFi Startup delay from 70ms to 35ms -from franciscofranco's idea. Thanks!
-opp4xxx_data.c: Decrease 230Mhz and 350Mhz MPU Clocks voltage
-net: wireless: bcmdhd: Reload FW in case of constant scan failure
-net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog
-net: wireless: bcmdhd: Ignore error if "chanspecs" command is not supported
-net: wireless: bcmdhd: Skip inaccurate wl_construct_reginfo() call
-net: wireless: bcmdhd: Add wiphyband update for country change
-net: wireless: bcmdhd: Return wl_construct_reginfo() call
-net: wireless: bcmdhd: Skip country setting if unnecessary
-net: wireless: bcmdhd: Add mutex to wl_update_wiphybands()
-net: wireless: bcm4329: Init locks in dhd_attach() at the beginning
-net: wireless: bcmdhd: Init locks in dhd_attach() at the beginning
-net: wireless: bcmdhd: Update wiphy bands on band change
-net: wireless: bcmdhd: Fix P2P GO hang issue
-net: wireless: bcmdhd: Remove country update from wl_update_wiphybands
-net: wireless: bcmdhd: Add info_string param with driver/fw/chip info
-net: wireless: bcmdhd: Adjust driver/fw/chip info format
-net: wireless: bcmdhd: Use proper jiffie-related functions
-net: wireless: bcmdhd: Prevent HT Avail request failure to flood the log
-OMAP4: hsmmc: fix race conditions in suspend/resume path
-OMAP: mcspi: Perform NULL pointer check before accessing cd->swap_datalines
v2.1 (06-27-2012 KST / GMT +9:00)
-Added 'PegasusQ' governor (Galaxy S3)
-Adjusted MPU(CPU) Clocks and Voltages
(200Mhz->230Mhz, 725.6Mhz->729.6Mhz, 1024Mhz->1064.4Mhz, 1.224Ghz->1.228Ghz, 1.544Ghz->1.52Ghz)
-Added evdev patch
-Cpufreq_pegasusq.c: Increase MIN_SAMPLING_RATE value 10000 to 20000
-Cpufreq_interactive.c: Tund interactive governor
-Fixed reboot and freezing issue (maybe)
v2.0 (06-24-2012 KST / GMT +9:00)
-Reverted "Backported CPUFreq from Linux Kernel 3.5-rc3"
(Maybe fixed battery drain when standby)
-Revert "OMAP4: hsmmc: fix race conditions in suspend/resume path"
-opp4xxx_data.c: Increase voltages 1.35Ghz
v1.9 (06-23-2012 KST / GMT +9:00)
-Backported CPUFreq from Linux Kernel 3.5-rc3
-Adjusted MPU(CPU) Clocks and Voltages
(700Mhz->725.6Mhz, 970Mhz->1024Mhz, 1.2Ghz->1.224Ghz, 1.52Ghz->1.544Ghz)
-Support Slide2Wake (Require/PGM2 Nexus App: https://play.google.com/store/apps/details?id=net.ponury.pgm2free)
-Removed Touch Wake
-Cpufreq: interactiver governor: Add a time view concept
-Disabled NTFS_FS (Kenrel debugs)
-Revert Overclock RAM
-Wireless: bcmdhd: remove wl_construct_reginfo check in wl_update_wiphybands (Thanks to renaudallard)
-Added evdev patch
-Linaro ToolChain gcc 4.7.1 (v1.7 ~ )
-Etc...
v1.8 (06-18-2012 KST / GMT +9:00)
-89airtweaks: Removed Voltage Control Command.
(Because, This Kernel is adjusted voltages automatically ( >=1.35Ghz).
-Removed Temp Control
-omap_temp_sensor.c: Increase the temperature threshold (64 -> 74)
-Revert "GRALLOC.C: increase TILER memory from 16MB to 32MB"
-Disabled XVMALLOC
-Enabled NTFS_FS
-Adjusted color values of Color Control
v1.7 (06-16-2012 KST / GMT +9:00)
-Switched Linaro Toolchain gcc 4.7.1 (O2)
-Enabled AIO
-Backported AIO from Linux Kernel 3.5-rc2
-Adjusted Kernel Debugs
-Added all recent BCMDHD(Wireless) patch
-Added recent OMAP patch
-Added TILER patch
-OverClocked RAM
-GRALLOC.C: increase TILER memory from 16MB to 32MB
-ext4: add missing save_error_info() to ext4_error()
-Adjusted MPU Voltages
-Etc...
v1.6 (06-07-2012 KST / GMT +9:00)
-Revert Linux Kernel 3.0.8 (It is Stable)
-Fixed the freezing bug when you shut down phone
-Changed values of Gamma offsets
-Added CGROUP_TIMER_SLACK (Thanks to HomuHomu)
-Updated 'twl6040' and 'SmartReflex'
-Enabled Lazy governor
-Disabled EXT2_FS
-Added CIFS Module
-Etc ...
v1.5 (06-06-2012 KST / GMT +9:00)
-Updated to Linux Kernel 3.0.17 !
-Changed values of Gamma offset
-Disabled ARCH_POWER
-Adjusted MPU Voltages
-Removed GPU Overclock Control
-Removed Sakuractive and Lazy governor
-Tuned Interactive and SmartassV2 governor
-Fixed the Sound Control (Ezekeel)
-Updated recent OMAP commits
-More Stable !
-Etc ...
v1.4 (05-27-2012 KST / GMT +9:00)
-Updated to Linux Kernel 3.0.15 !
-Supported ZRAM
-ZRAM backported from Linux kernel 3.2.17
-Removed 1.72Ghz and Stable OverClock ( ~ 1.65Ghz) !
-Tuned Interactive governor
-Re-Supported KSM
-Adjusted Voltages
-Disabled Some kernel debugs
-Add ACCESSORY_SET_AUDIO_MODE control request and ioctl
-USB: gadget: f_accessory: Add support for HID input devices
-USB: gadget: f_audio_source: New gadget driver for audio output
-Updated some OMAP source
-etc...
v1.3 (05-26-2012 KST / GMT +9:00)
-Added 200Mhz and Changed Clock 1.8Ghz to 1.72Ghz and 1.65Ghz to 1.64Ghz
-Reduced MPU Voltages
-Tuned SmartassV2 and Conservative(franciscofranco and Me) governor
-Fixed bugs in SmartassV2 (by abev66)
-Updated recent OMAP source and Interactive governor
-Revert omap2plus: cpufreq: Modify lpj recalculation logic
-Revert Allowed overclockable to 2.4Ghz-from ezekeel
-Re-increased Tuna wlan voltage to 2.0V(Stock)
-...
v1.2 (05-20-2012 KST / GMT +9:00)
-Re-added Color Control and gamma preset
-Added SmartassV2 and Sakuractive governor (by sakuramilk)
-Adjusted Display Color
-Reduced MPU Voltages
v1.1 (05-19-2012 KST / GMT +9:00)
-Added 1.65Ghz, 1.8Ghz and removed 1.42Ghz
-Removed Color Control and gamma feature
-Adjusted Voltages and Display Color
-OTG: Disable MUSB DMA mode incase of DMA channel request failure
-Bcmdhd: Turn OFF wlan power if interface UP fails
-HSI: Prevent HSI clock disable while ACWAKE is high
-Vfp: Fix memory corruption on PM suspend
-Vfp: only clear vfp state for current cpu in vfp_pm_suspend
-twl-rtc: mask alarm interrupts at shutdown.
-...
v1.0 (05-13-2012 KST / GMT +9:00)
-Initial Release !!
Awesome, I'll have to give this kernel a shot sometime!
Glad to see this kernel thread also on the toro side of things. This kernel is very nice! Really enjoying 1.9 so far
Sent from my Galaxy Nexus using xda premium
Battery Saving : 200Mhz/1024Mhz
-Air Kernel Stock Clocks : 350Mhz / 1224Mhz
Script : '/system/etc/init.d/89airtweaks'
Click to expand...
Click to collapse
Release
Air Kernel Weekly Build #247 - 20120623
Change Log :
-Added PegasusQ governor (Galaxy S3)
DownLoad
Air Kernel Blog Link
+Stable Verison (v1.0, 1.1.....) : Literally Stable version !
+Weekly Version (#246, #247....) : Experiment version + Every Week Build (maybe)
Release
Air Kernel Weekly Build #250 - 20120623
Change Log :
-Tuned PegasusQ governor and ported Dual-Core (Thanks to gokhanmoral)
-Cpufreq_pegasusq.c: Increase MIN_SAMPLING_RATE values 10000 to 20000
-Cpufreq_interactive.c: Tund interactive governor
DownLoad
Air Kernel Blog Link
+Stable Verison (v1.0, 1.1.....) : Literally Stable version !
+Weekly Version (#246, #247....) : Experiment version + Every Week Build (maybe)
Weekly version is only GPU 384Mhz.
File Name :
Air_Kernel_vX.X_YYY_GN-ZZZZZZZZ.zip
X.X = version
YYY = GPU Clock
ZZZZZZZZ = Date
Air_Kernel_Weekly_#XXX_YYY_GN.zip
X.X = Weekly Build Number
YYY = GPU Clock
Click to expand...
Click to collapse
I just flashed your Kernel and the first thing I noticed is my screen is noticeably dimmer at the lowest brightness even with "Auto On". Is this for battery savings? Or is it not intended?
I run Slim Rom 4.0.0
Glad to see you over here! Most stable kernel I've tried to date.
Sent from my GT-I9300 using Tapatalk 2
How's the battery
Sent from my Galaxy Nexus using xda premium
I switched back to the stock Slim kernel because in the 2 hours after I flashed this I lost 20% battery while in standby.
zedorda said:
I switched back to the stock Slim kernel because in the 2 hours after I flashed this I lost 20% battery while in standby.
Click to expand...
Click to collapse
Thank you for your feedback
I'll check it
Sent from my Galaxy Nexus using xda premium
v2.0 (06-24-2012 KST / GMT +9:00)
-Reverted "Backported CPUFreq from Linux Kernel 3.5-rc3"
(Maybe fixed battery drain when standby)
-Revert "OMAP4: hsmmc: fix race conditions in suspend/resume path"
-opp4xxx_data.c: Increase voltages 1.35Ghz
Click to expand...
Click to collapse
Release
r_data said:
Release
Click to expand...
Click to collapse
Nice
Sent from the future.
Kewl will give it another go and see what I get.
I checked v2.0 bug.
(use 200mhz and freezing...)
I will upload fix version on weekend.
Sent from my Galaxy Nexus using xda premium
In the first 30mins I lost 5% but then it leveled off and is draining as normal. Thanks
I keep getting forced restarts after installing this. Anyone else have a problem like this?
v2.1 (06-27-2012 KST / GMT +9:00)
-Added 'PegasusQ' governor (Galaxy S3)
-Adjusted MPU(CPU) Clocks and Voltages
(200Mhz->230Mhz, 725.6Mhz->729.6Mhz, 1024Mhz->1064.4Mhz, 1.224Ghz->1.228Ghz, 1.544Ghz->1.52Ghz)
-Added evdev patch
-Cpufreq_pegasusq.c: Increase MIN_SAMPLING_RATE value 10000 to 20000
-Cpufreq_interactive.c: Tund interactive governor
-Fixed reboot and freezing issue (maybe)
Click to expand...
Click to collapse
Release v2.1
[Mannual Way]
For editing build.prop you'll need a root enabled file explorer i used ES file explorer.
---------------------------------------------------------------------------------------
# MEDIA TWEAKS-----------------
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=true
# photo/video quality
ro.media.enc.jpeg.quality=100
ro.media.enc.hprof.vid.bps=8000000 #control video bitrate (stock cam app only)
# MISCELLANEOUS TWEAKS-----------------
wifi.supplicant_scan_interval=180
#If you don’t keep Wi-Fi active, lowering the value below the default of 90 seems to make Wi-Fi connect faster after being turned on. But it will consume more power if turning Wi-Fi off has been forgotten when not in range of a known network.
windowsmgr.max_events_per_sec=90 #This number equates to the refresh rate * 1.5 Android maxes at 60fps. Max value is already set to 90.
# faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# improve voice call clarity
ro.ril.enable.amr.wideband=1
# disable error checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# disable logcat
logcat.live=disable
# faster youtube?
ro.ril.hep=0
# Faster boot
persist.sys.shutdown.mode=hibernate
# disable animation for faster startup
#debug.sf.nobootanimation=1
# does not need to be on if not a dev
persist.android.strictmode=0
# disable USB debugging icon from status bar
persist.adb.notify=0
#HARDWARE RELATED TWEAKS-----------------
# Render graphics with GPU&CPU
#debug.composition.type=CPU
#debug.composition.type=GPU
# Qualcomm display settings
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
com.qc.hardware=true
# BATTERY SAVING-----------------
ro.ril.disable.power.collapse=1
ro.mot.eri.losalert.delay=1000 #smooths out network disconnects. breakes tethering in CM7.
ro.config.nocheckin=1 #disable sending usage data to google
# sleep modes
pm.sleep_mode=2
#usage:
#pm.sleep_mode=0 -> collapse suspend
#pm.sleep_mode=1 -> collapse (will totally power off the cpu)
#pm.sleep_mode=2 -> sleep (cpu is still on, but put into low power mode (registers are still saved)
#pm.sleep_mode=3 -> slow Clock and Wait for Interrupt (lowered frequency and voltage)
#pm.sleep_mode=4 -> wait for interrupt (no change in cpu clock or voltage)
----------------------------------------------
[Flash Method]
Download the zip file from the attachment.
Place it in the root of sdcard.
Boot your phone in recovery mode. [up volume+power] or [up volume+power+home]
Select option flash from .zip file.
Browse to the file.
FLASH. REBOOT..
DONE!!
Hello can any one give me the original build.prop file for coolpad dazen 1 please, i have deleted unfortunately and my phone is not working properly. Please anyone help me.
Hey everyone!
Does anybody else get this weird artifacts/glitches in this game, screenshot down below. XS rooted.
Any fixes, seems like an awesome game!!
Disable HW Overlays and it will be OK
EDIT: If you have root add these lines to build.prop
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.performance.tuning=1
debug.egl.hw=1
debug.composition.type=gpu
persist.sys.composition.type=gpu
Hello, I use SimpleGx kernel and I want to know how I can change the settings for gouvernor with this settings:
It's from Nexus 6P sections, work on our G4?
target_loads - 95 460800:25 600000:43 672000:65 787200:78 864000:92 960000:95 1248000:98 1440000:100
timer_slack - -1
hispeed_freq - 384Mhz
timer_rate - 20000
above_hispeed_delay - 20000
go_hispeed_load - 200
min_sample_time - 60000
max freq hysteresis - 0
target_loads - 24 480000:17 633600:31 768000:43 864000:56 960000:79 1248000:76 1344000:85 1440000:92 1536000:95 1632000:98 1689600:99 1824000:100
timer_slack - -1
hispeed_freq - 384Mhz
timer_rate - 40000
above_hispeed_delay - 40000
go_hispeed_load - 200
min_sample_time - 40000
max freq hysteresis - 0
---------------------------------
ADDITIONAL:
Touch boost OFF, as always.
Input boost: 672Mhz @40ms
Enjoy, test, report, tear it apart!
use kernel auditior from playstore.. other good is sypnase and you need to install UMK something like that cant remember.