Develop Bugs

[Q] ARLiberator/AllShare Cast and my S3...

I rooted my S3 so I could use ARLiberator with the AppRadio2. I am using the AllShare Cast dongle with the AppRadio to make it all work wirelessly. After I rooted my phone, the AllShare Cast option in my settings was gone. So, (keep in mind I'm a noob) when I got the notice my phone was due for an Over the Air update, I did it. Good news, it didn't brick my phone and I got AllShare Cast back. Bad news, it took my root away.
So, I need to know where I can find a 100% stock image that just injects root that I can do via Odin. The only reason I have to root right now is to get this working with AppRadio. In the future I may get more crazy with other ROMs, but right now I just want this to work.
Can someone point me to a safe tar file that is the root for a stock image on the AT&T SGS-i747 that is the most current?
Thanks.
AND, if there's anything else I need to know, please inform away! The root I did last time didn't add to my counter, so I'm kinda hoping that any new root I do won't either. If it does, I guess that is okay as long as the triangle app I've read about can fix it.
Again, thanks for any and all input. I'm learning as fast as I can.

shawn10ski said:
I rooted my S3 so I could use ARLiberator with the AppRadio2. I am using the AllShare Cast dongle with the AppRadio to make it all work wirelessly. After I rooted my phone, the AllShare Cast option in my settings was gone. So, (keep in mind I'm a noob) when I got the notice my phone was due for an Over the Air update, I did it. Good news, it didn't brick my phone and I got AllShare Cast back. Bad news, it took my root away.
So, I need to know where I can find a 100% stock image that just injects root that I can do via Odin. The only reason I have to root right now is to get this working with AppRadio. In the future I may get more crazy with other ROMs, but right now I just want this to work.
Can someone point me to a safe tar file that is the root for a stock image on the AT&T SGS-i747 that is the most current?
Thanks.
AND, if there's anything else I need to know, please inform away! The root I did last time didn't add to my counter, so I'm kinda hoping that any new root I do won't either. If it does, I guess that is okay as long as the triangle app I've read about can fix it.
Again, thanks for any and all input. I'm learning as fast as I can.
Click to expand...
Click to collapse
Take a look here, look for the stock image with root injected into it. I am also using Allshare Cast with Arliberator - how is it working out for you? I have some issues where my subwoofer will turn off sometimes, but if I press the menu button on the Appradio to launch voice commands, then click back, the subwoofer will turn on. Weird...

I've been eyeballing this setup. Do either of you have Tasker? I'm wondering if it can be setup so that I don't even have to take my phone out of my pocket. Do you have to manually press a button on the Allshare dongle every time you get in the car or will it connect automatically after the initial setup?
Thanks,
Bodie

As long as arliberator is running on the phone, it should connect automatically. MOST of the time. I've changed to the wired setup using the Samsung mhl adapter. I never got the sound quality to be good using the all share cast dongle. Since I really wanted to run Pandora,sirius xm and other music apps from my phone,this was really a bust for me. I also went through the counterfeit dongle issues. I bought one on Amazon and got all the snow issues I've read other people had. I went to Samsung's website and bought it directly through them, and I've had no problems since. I've been running it a week with that setup and have had no issues. It just works like it should. I had connection issues with all share cast With it stopping at random. I'm very hopeful that all my trial and error is over.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Miracast to Sony TV ?

Hello Everyone,
I was wondering if anyone has been able to screen mirror via miracast their Tab S to a non Samsung TV without using a dongle (to a miracast capable TV)?
Thank you for taking the time to look and especially if you can help!
-T

Yes,
I was able to connect my Tab S 10.5, 32GB version to a Sony KDL-65W850A television without any dongles, or problems at all.

gregoryostrom said:
Yes,
I was able to connect my Tab S 10.5, 32GB version to a Sony KDL-65W850A television without any dongles, or problems at all.
Click to expand...
Click to collapse
Can you give me a walkthrough please? I'd like to do the same.

Zamboney said:
Can you give me a walkthrough please? I'd like to do the same.
Click to expand...
Click to collapse
You bet! All I had to do was turn on the screen mirroring by pushing the "screen mirroring button" located in the drop down menu(the toolbar that shows up when you pull down the notification bar, sorry, I can't think of the actual name of the menu right now). Then go to your TV and go to the input menu and scroll over to the right and you should see an input for a wireless device, or something to that effect. Click on that input and it will start searching for your tablet. The first time I had to restart the scan from my tablet because the television didn't find it. Almost instantly after restarting the scan from my tablet, the television found it. I'm not by my TV now, but if I remember correctly, the very first time you try to connect a new device, the TV comes up with a list of devices and you have to click on the tablet. After the TV has successfully connected with a device, all that needs to be done next time is simply turn your mirroring on, and click the wireless device input on your TV, and it will connect without having to choose your device from a list. That's all I had to do. Good luck!

Sounds good! I have a w905, so hopefully it works as well as for you. Thanks for the help!
Sent from my GT-N7000 using Tapatalk 2

gregoryostrom said:
You bet! All I had to do was turn on the screen mirroring by pushing the "screen mirroring button" located in the drop down menu(the toolbar that shows up when you pull down the notification bar, sorry, I can't think of the actual name of the menu right now). Then go to your TV and go to the input menu and scroll over to the right and you should see an input for a wireless device, or something to that effect. Click on that input and it will start searching for your tablet. The first time I had to restart the scan from my tablet because the television didn't find it. Almost instantly after restarting the scan from my tablet, the television found it. I'm not by my TV now, but if I remember correctly, the very first time you try to connect a new device, the TV comes up with a list of devices and you have to click on the tablet. After the TV has successfully connected with a device, all that needs to be done next time is simply turn your mirroring on, and click the wireless device input on your TV, and it will connect without having to choose your device from a list. That's all I had to do. Good luck!
Click to expand...
Click to collapse
Just got my Samsung Tab S 10.5 last night. Have a Sony KDL-55HX800 tv.
I followed your instructions above, but my tv is not detected by the tablet.
Both the tablet and tv are on the same network.
Is my tv too old?
Any help, greatly appreciated.

Robls said:
Just got my Samsung Tab S 10.5 last night. Have a Sony KDL-55HX800 tv.
I followed your instructions above, but my tv is not detected by the tablet.
Both the tablet and tv are on the same network.
Is my tv too old?
Any help, greatly appreciated.
Click to expand...
Click to collapse
Hello,
I did a little checking around for you. From what I read on Sony's website, it looks to me like a USB adapter is required for a wireless network connection. The adapter is a UWA-BR100, but after doing some research on the adapter, it looks like it won't work for miracast. Now, I couldn't find it on Sony's website, but several people made the comment that the adapter specifications state that it does support miracast, although nobody seemed to have been able to get it working. It may be possible to wirelessly stream through the adapter, but I wasn't able to find anybody that had been successful. Sorry I couldn't be more help.

gregoryostrom said:
Hello,
I did a little checking around for you. From what I read on Sony's website, it looks to me like a USB adapter is required for a wireless network connection. The adapter is a UWA-BR100, but after doing some research on the adapter, it looks like it won't work for miracast. Now, I couldn't find it on Sony's website, but several people made the comment that the adapter specifications state that it does support miracast, although nobody seemed to have been able to get it working. It may be possible to wirelessly stream through the adapter, but I wasn't able to find anybody that had been successful. Sorry I couldn't be more help.
Click to expand...
Click to collapse
Thanks.
I have a Chromecast, and am hoping the Tab S gets the update for screen mirroring that way. Just thought I might be able to do it before the update.

[Q] screen mirroring not working, hardware problem?

Hello everyone, I just bought a Samsung smart tv with screen mirroring feature and my note 4, my wife old note tablet connects with no problems, but my note 10.1 2014 edition gives me "unable to connect because of an hardware problem" message. I am not rooted, I have the U.S wifi edition. patch did not help either.
does anybody have a solution please. going crazy. spent arm and a leg for a smart Samsung TV and can not do a simple task.

Have same problem connecting to Sony cinema system. S4 connects with screen mirrowing but note note 2014 with same Android version gives connecting error. If I find solution I will let you know.
Sent from my SM-P600 using Tapatalk

Also having Mirroring issues
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.

This is most likely a software problem if you don't have any trouble with your wifi connection.

I do not have any reason to believe my WIFI has any issues. I can stream the movie to the Samsung Tablet without any problem, it's only when I try to use the mirroring that problems occur. Also, I was able to mirror using the exact same setup with an android phone I had laying around that's about 3 years old and was able to 1) connect to the Push2TV much more readily 2) stream the movie without it locking up every 3-5 minutes.

I just bought a brand new Samsung smart TV 7250 series. Exact same problem. P600, US, totally stock. Not even root.
Sent from my XT1060 using Tapatalk

mikejj24 said:
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
Click to expand...
Click to collapse
I just got the ptv3000, updated the firmware, and can connect no problems, except for the fact that it only mirrors a corner of my screen (only 1080p out of 1600p of the tab). I just can't figure out what to do. Yet I also saw that others had got it working. Why is it difficult with this tab.

scarlettwings said:
I just got the ptv3000, updated the firmware, and can connect no problems, except for the fact that it only mirrors a corner of my screen (only 1080p out of 1600p of the tab). I just can't figure out what to do. Yet I also saw that others had got it working. Why is it difficult with this tab.
Click to expand...
Click to collapse
So you got that working except the resolution issue right? To help others can you please share info of your device?
Which version of the tablet? (4g, 3g or wifi)
Rooted or not?
Stock or custom rom?
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi

Samsung Tablet unable to screen share ...FIXED
mikejj24 said:
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
Click to expand...
Click to collapse
Hi There, No need to worry. Please read below the fix.
Alright, here is the Fix for this. Please spread the word if this works for you. Because it worked for me. I didn't discover this solution so I can't take credit for this. Here it goes:
1. On your Note Pro/Tab Pro find All Share Cast from Samsung and UnInstall all the updates. Then click Force Close, all of this should be done in Application Manager.
2. Restart your Note Pro/Tab Pro (Very Important)
3. Using two fingers pull down the main screen from top down to unveil the controls menu. Touch Screen Sharing while the Miracast or other screen sharing service (Wifi Direct etc) is activated on Your TV.
4. Let it auto find it and auto connect..........Viola!

uncensoredtr said:
So you got that working except the resolution issue right? To help others can you please share info of your device?
Which version of the tablet? (4g, 3g or wifi)
Rooted or not?
Stock or custom rom?
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hi, I have the P605 with 4G, unrooted and on stock 4.3.

imagine cars said:
Hello everyone, I just bought a Samsung smart tv with screen mirroring feature and my note 4, my wife old note tablet connects with no problems, but my note 10.1 2014 edition gives me "unable to connect because of an hardware problem" message. I am not rooted, I have the U.S wifi edition. patch did not help either.
does anybody have a solution please. going crazy. spent arm and a leg for a smart Samsung TV and can not do a simple task.
Click to expand...
Click to collapse
Hi try this.delete all share cast dongle s/w update version which is 1.2.3717 uninstall this.maybe it will help.i have the same problem on my note 3 N9000 non rooted device.if it help you please let me know.

Have p600 WiFi and tried fix and got same result. I select device, tries to connect, and returns can't connect after awhile.
Sent from my SM-P600 using Tapatalk

So I contacted Samsung customer support regarding this problem.
The first contact, they required me to do a factory reset, so in order to go any farther, I did that.
Once that was done, and the problem still existed, even before doing any updates or anything, I contacted Samsung Support again.
This time, they told me that I would have to send it in for repair at my expense (because mine is out of warranty; which pisses me off, because it was less than 3 weeks out of warranty.) Mind you, they never could tell me what the cost would be.
So apparently, I'm just not going to be able to screen cast from my SAMSUNG tablet to my SAMSUNG TV... even though screencasting from my Moto X works perfectly fine...
I do have squaretrade, but I'm not sure I want to claim that warranty just because of some screen mirroring not working...

Screen Mirroring Issue FIXED!!
Enzymaticracer said:
So I contacted Samsung customer support regarding this problem.
The first contact, they required me to do a factory reset, so in order to go any farther, I did that.
Once that was done, and the problem still existed, even before doing any updates or anything, I contacted Samsung Support again.
This time, they told me that I would have to send it in for repair at my expense (because mine is out of warranty; which pisses me off, because it was less than 3 weeks out of warranty.) Mind you, they never could tell me what the cost would be.
So apparently, I'm just not going to be able to screen cast from my SAMSUNG tablet to my SAMSUNG TV... even though screencasting from my Moto X works perfectly fine...
I do have squaretrade, but I'm not sure I want to claim that warranty just because of some screen mirroring not working...
Click to expand...
Click to collapse
Please read my response on the previous page.

chief10rules said:
Please read my response on the previous page.
Click to expand...
Click to collapse
The instructions didn't help chief. My tablet doesn't even have all share cast installed. Thanks for the idea though.

Enzymaticracer said:
The instructions didn't help chief. My tablet doesn't even have all share cast installed. Thanks for the idea though.
Click to expand...
Click to collapse
stock rom should have it. are you using a custom rom?

Nope, fully stock. Not even rooted. Is there some other name for it?
Sent from my XT1060 using Tapatalk

Enzymaticracer said:
Nope, fully stock. Not even rooted. Is there some other name for it?
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's strange. try flashing latest stock rom for your device via odin. You can download it from sammobile
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi

If I had the time I'd be happy to try, but I need this tablet for work right now, and I finally just got everything set back up from when I had to factory reset over the weekend. Maybe when I have the time in the future.
Thanks

All Share Cast replaced by Samsung Link
chief10rules said:
Hi There, No need to worry. Please read below the fix.
Alright, here is the Fix for this. Please spread the word if this works for you. Because it worked for me. I didn't discover this solution so I can't take credit for this. Here it goes:
1. On your Note Pro/Tab Pro find All Share Cast from Samsung and UnInstall all the updates. Then click Force Close, all of this should be done in Application Manager.
2. Restart your Note Pro/Tab Pro (Very Important)
3. Using two fingers pull down the main screen from top down to unveil the controls menu. Touch Screen Sharing while the Miracast or other screen sharing service (Wifi Direct etc) is activated on Your TV.
4. Let it auto find it and auto connect..........Viola!
Click to expand...
Click to collapse
All Share Cast has been replaced by Samsung Link. Screen Mirror works in Chromecast app on S5 and Note 10.1 (2014) but uses the network so has some lag. Screen Mirror works with Microsoft Display Adapter on S5 without network or lag but get the hardware error on stock Note 10.1 (2014). Tried the All Share Cast Patch and that did not work either. Still looking.

[Q] Chromecast Partially Working

Hi, Has anyone been able to get Chromecast to work with our M9?...Please let me know if there is a hidden setting to turn it on or something else. I am able to connect to all my devices but my Chromecast and my Nvidia Shield tablet connects ok with it so the device is working.
Thanks.
Chingonazo

Works fine on my M9, no special setup required.
I had it paired with an HTC One X. Got the M9 and downloaded the Chromecast app, launched and it found it and connected fine and casts with no issues.
Maybe try clearing data and cache in the app defaults or a factory reset on the Chromecast itself?
Chingonazo said:
Hi, Has anyone been able to get Chromecast to work with our M9?...Please let me know if there is a hidden setting to turn it on or something else. I am able to connect to all my devices but my Chromecast and my Nvidia Shield tablet connects ok with it so the device is working.
Thanks.
Chingonazo
Click to expand...
Click to collapse

Hi ZombieSuffer, I appreciate the suggestion, I did that but still no go, Just so I am clear what my issue is, I can cast individual apps but I am not able to mirror the entire phone like I can do with my M7 or Shield tablet. I Also tested it with my Roku 3 player and same problem.
Thanks
Chingonazo

Oh, I see. Not sure if this helps but I found a thread around 9 months old that might have some steps you can run through to get it to mirror.
http://www.reddit.com/r/Chromecast/comments/2ahy1p/solved_can_now_mirror_my_s4_on_cm11/
Chingonazo said:
Hi ZombieSuffer, I appreciate the suggestion, I did that but still no go, Just so I am clear what my issue is, I can cast individual apps but I am not able to mirror the entire phone like I can do with my M7 or Shield tablet. I Also tested it with my Roku 3 player and same problem.
Thanks
Chingonazo
Click to expand...
Click to collapse

tv to mobile miracast with quick connect on samsung smartphone!!new feauture

hello to all
actually i accidently find tv to mobile streaming with quick connect on my note 4 samsung
is there anybody what have it to?
but theres a problem...when i connected to my tv on my smartphone displays only channel change up and down power on tv and volume up and down
theres no screen from channel
has anybody found somethink?
did i have to enable somethink on my sasmung smart tv?
thank you
p.s i hardly searched internet and noone wrote somethink about this...i think its new feature?!

anestef said:
hello to all
actually i accidently find tv to mobile streaming with quick connect on my note 4 samsung
is there anybody what have it to?
but theres a problem...when i connected to my tv on my smartphone displays only channel change up and down power on tv and volume up and down
theres no screen from channel
has anybody found somethink?
did i have to enable somethink on my sasmung smart tv?
thank you
p.s i hardly searched internet and noone wrote somethink about this...i think its new feature?!
Click to expand...
Click to collapse
I don't have Miracast. I also have this problem. TV to device not working in rooted stock Rom or Custom Rom because phone status and binary changed from Official to Custom. I need to hear the sound of the my Samsung Smart TV through hands-free because the sound amplification program needs rooted access.

white rose said:
I don't have Miracast. I also have this problem. TV to device not working in rooted stock Rom or Custom Rom because phone status and binary changed from Official to Custom. I need to hear the sound of the my Samsung Smart TV through hands-free because the sound amplification program needs rooted access.
Click to expand...
Click to collapse
so there is no way to have tv to mobile screen with rooted phone?
any app what could help?

anestef said:
so there is no way to have tv to mobile screen with rooted phone?
any app what could help?
Click to expand...
Click to collapse
I tested many apps about casting but not solved. I think if status and binary changed to Official then Quick connect should fully work. I'll still try more ways..

white rose said:
I tested many apps about casting but not solved. I think if status and binary changed to Official then Quick connect should fully work. I'll still try more ways..
Click to expand...
Click to collapse
i tried with quick connect without phone root and nothink it only gave me sound but no picture

anestef said:
i tried with quick connect without phone root and nothink it only gave me sound but no picture
Click to expand...
Click to collapse
Clear data for following system apps and try to connect:
AllShare FileShare Service
BeaconManager
Nearby devices
Nearby Service
Quick Connect
Wi-Fi Direct
Wi-Fi Direct share
withTV
If not, go to stock recovery and full wipe (dalvik/cache/data) and flash stock ROM again via Odin. (Be sure to make a backup at first)

white rose said:
Clear data for following system apps and try to connect:
AllShare FileShare Service
BeaconManager
Nearby devices
Nearby Service
Quick Connect
Wi-Fi Direct
Wi-Fi Direct share
withTV
If not, go to stock recovery and full wipe (dalvik/cache/data) and flash stock ROM again via Odin. (Be sure to make a backup at first)
Click to expand...
Click to collapse
so thank you very mutch i tried it but when i click on tv to mobile screen it just connect and nothink happens...
could you tell me some of the apps you has tested for this?

anestef said:
so thank you very mutch i tried it but when i click on tv to mobile screen it just connect and nothink happens...
could you tell me some of the apps you has tested for this?
Click to expand...
Click to collapse
I still didn't find any apps that have this feature. I just installed the Stock ROM again after completely wipe data and factory reset in stock recovery. Then turn off the battery saving mode and tap on Quick Connect section. I get the sound and the image. My phone model is N910H.
Only problem is the poor reception of some TV channels. Voice boosting programs are also mostly fake, and I think it needs root access that it will stop this feature.
I hope you find a way to solve your problem.

white rose said:
I still didn't find any apps that have this feature. I just installed the Stock ROM again after completely wipe data and factory reset in stock recovery. Then turn off the battery saving mode and tap on Quick Connect section. I get the sound and the image. My phone model is N910H.
Only problem is the poor reception of some TV channels. Voice boosting programs are also mostly fake, and I think it needs root access that it will stop this feature.
I hope you find a way to solve your problem.
Click to expand...
Click to collapse
oh okay...im start thinking that there is no any app what can do this!
i tried with stock rom again and now its worked and have the same problem with you iv got poor reception of some channels too
so thank you again

im here again!
finally i make it work!
just as member white rose said
i go back to stock rom and my tv can stream channels to my smartphone!