Develop Bugs

[Q] Htc desire (stuck on htc white screen, does not go into recovery)

hello guys. is the first time I write, I'm Italian and I help with google translator, the following will put the discussion in Italian in case you have the best translators.
I have a problem with my htc desire, now is as good as dead.
It remains stuck on htc white screen and does not go into recovery.
If I try to start the RUU (2.29 etc ..., or gingerbread) gives me error (155: error image)
I hope you can help me or maybe I think the problem is the motherboard, advise me some site that sells motherboards recently prezzo.Vi Thank you in advance for your help.
The phone is s-off (good stock 6.93.1002) Alpharev
Italian:
ciao ragazzi. è la prima volta che scrivo,sono italiano e mi aiuto con google traduttore,di seguito metterò anche la discussione in italiano in caso abbiate traduttori migliori.
Ho un problema al mio htc desire,ormai è praticamente morto.
Rimane bloccato su htc con schermo bianco e non va più in recovery.
Se provo ad avviare la RUU (2.29 ecc...,oppure gingerbread) mi da errore (155: errore immagine)
Spero mi possiate aiutare o magari credo che il problema sia la scheda madre,consigliarmi qualche sito che vende schede madri a poco prezzo.Vi ringrazio in anticipo per il vostro aiuto.
Il telefono è s-off (bravo stock 6.93.1002) Alpharev

Ciao Alfonso
Did you try flashing a new recovery? In my sig you will find 4ext recovery as a PB99IMG.zip. Download it, and put it on directly your sd-card, outside any folder. Now, boot in hboot, and it should prompt you to install it.

wrong image
abaaaabbbb63 said:
Ciao Alfonso
Did you try flashing a new recovery? In my sig you will find 4ext recovery as a PB99IMG.zip. Download it, and put it on directly your sd-card, outside any folder. Now, boot in hboot, and it should prompt you to install it.
Click to expand...
Click to collapse
hello and thanks for the reply.
I tried but it gives me error image too. I put out of the folders: (

hmm people keep saying today that my PB99IMG.zip doesnt work.... well i downloaded it, put on sdcard, booted bootloader, and guess what it said?
update recovery?
so it does work, no offense but u must be doing somthing wrong.
Sent from my HTC Desire

Originally Posted by abaaaabbbb63<br />
Ciao Alfonso <br />
<br />
Did you try flashing a new recovery? In my sig you will find 4ext recovery as a PB99IMG.zip. Download it, and put it on directly your sd-card, outside any folder. Now, boot in hboot, and it should prompt you to install it.
Click to expand...
Click to collapse
<br />
<br />
hello and thanks for the reply.<br />
I tried but it gives me error image too. I put out of the folders: (
Click to expand...
Click to collapse
If you have s-off, that means that you have fastboot installed. From the PB99IMG.zip, extract the image only, put it in C:/ on your PC, then boot phone in fastboot (back+power button) and connect it to the PC. Then open cmd, and type "fastboot flash recovery C:/ recovery.img".
If you don't have fastboot installed, check this out.
http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/

hello jmcclue meantime thank you for your PMBIMG99.zip, does not please me even that does not work, it is not me to say so to speak. I put the microsd in PMBIMG99 and I threw the phone in fastboot and when loading does not ask me anything, but I get only "wrong image". Abaaaabbbb63 Hello and thanks for the reply. Tomorrow I'll try, now sadly I can not use the pc
Italian:
ciao jmcclue intanto ti ringrazio per la tua PMBIMG99.zip, non fa piacere nemmeno a me che non funzioni, non é che io lo dica per modo di dire. Io ho messo la PMBIMG99 nella microsd e ho lanciato il telefono in fastboot e quando carica non mi chiede niente,ma mi esce solo "wrong image". Ciao abaaaabbbb63 e grazie per la risposta. Domani ci proveró, ora purtroppo non posso usare il pc
Update: I flashed the recovery you suggested, but unfortunately without success, in the sense, she was not in recovery. I flashed the Amon Ra 2.0.0 and now I'm in recovery.
How should I do?
Aggiornamento: ho flashato la recovery da voi consigliata,ma purtroppo senza successo,nel senso,non andava in recovery. Ho flashato la Amon Ra 2.0.0 ed ora sto in recovery.
Come devo fare??
Sent from my iPod touch using Tapatalk

Meh.. AmonRa works too. The point was to get you in recovery. Now, do you have the original zip of the rom you had installed? Clear only cache and dalvik cache, and flash the zip. It should boot now.
Or flash any other custom rom with a full wipe.

So, I finally installed ClockworkMod 2.5.0.7. This is because when I installed the two previous recovery was broken up and it downwards. Now, however, yet another problem, if I try to flash any rom crashes already at the beginning and restarts the phone. Do you know any tool to flash ROM from a PC?
Italian:
Allora,infine ho installato ClockWorkMod 2.5.0.7. Questo perché quando ho installato le due recovery precedenti non andava ne su e ne giú. Ora peró ancora un'altro problema,se provo a flashare una qualsiasi rom si blocca giá all'inizio e si riavvia il telefono. Conosci qualche TOOL per flashare ROM da pc?
Sent from my iPod touch using Tapatalk

You need a working recovery. Try getting a newer cwm version.

can you tell me the latest version of ClockworkMod?
Sent from my iPod touch using Tapatalk

Alfonso27 said:
can you tell me the latest version of ClockworkMod?
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Google is ur friend

I've also already downloaded XDXDXD anyway Could you tell me if there is a tool to flash ROM directly from the PC?
Sent from my iPod touch using Tapatalk

Thats what ur recovery is for, because u also need to perform a full wipe before flashing a rom.
Sent from my HTC Desire

This I know, but when I do wipe and flash the rom I get stuck just starts and restarts. That's why I asked for a program to flash roms from pc
Sent from my iPod touch using Tapatalk

Alfonso27 said:
This I know, but when I do wipe and flash the rom I get stuck just starts and restarts. That's why I asked for a program to flash roms from pc
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Did u full wipe before flashing rom? Wipe factory reset, wipe cache, wipe dalvik cache etc etc.
Sent from my HTC Desire

Yes, of course, all around
Sent from my iPod touch using Tapatalk

Alfonso27 said:
Yes, of course, all around
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
What rom r u trying to flash? Does it require u to have ext3/4 partition on ur sdcard?
Sent from my HTC Desire

I'm trying to flash STABLE ANDROID 4.0.4 released but marius.a. In the requirements asks only stock hboot and htc desire, there int2sd and a2sd version .. I I've downloaded both but nothing. Installation there is written that I have to format everything except the sd and after the reboot, install link2sd and choose the partition ext 2/3/4 ..
Sent from my iPod touch using Tapatalk

Alfonso27 said:
I'm trying to flash STABLE ANDROID 4.0.4 released but marius.a. In the requirements asks only stock hboot and htc desire, there int2sd and a2sd version .. I I've downloaded both but nothing. Installation there is written that I have to format everything except the sd and after the reboot, install link2sd and choose the partition ext 2/3/4 ..
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
do u have an ext partition?
when i flashed that rom, i was on stock hboot and in recovery, format all partitions except sdcard then flash the rom then reboot and had no problems

I have done all these steps, but I get stuck when i run the installation of the rom, so I asked if you know a program for windows pc to flash rom without recovery. I think it is the motherboard, in fact, as I wrote in my first post I asked if anyone knows any site that sells them cheap? Or perhaps maybe the parties can be too much dust in your phone for these days when I removed the back I saw "dust" in the phone. Tomorrow I will follow some video for the dissasemblaggio the phone. Meanwhile, what can you advice over the questions you've done? Thanks again anyway, you're very kind
Sent from my iPod touch using Tapatalk

[Q] Xperia S Stuck on Updating Paranoid Android

Hello all !
(First, sorry if I don't make myself clear enough, I'm french..)
Today I updated the Paranoid Android rom from the OTAParanoidandroid app, and when it said it was rebooting, the screen went off in a weird way.
I rebooted it and it was stuck on the boot animation (with the colourful spheres) for like an hour. I gave up, pressed the power + Volume up button, and went into recovery.
I tried updating it from here, but I've got the same problem, the boot animation takes ages !
So I cancelled it again, and I tried to wipe the cache and the dalvik's one.
When I rebooted it, it said it was updating android apps, but when it came to '"starting apps.." it remained stuck for 10mn..
After That, I managed to have it working with my PC, I reflashed the G apps and the Rom.
But Maps "stopped working" everytime
I tried a previous version of gapps, deleting the cache... Still nothing !

Salut !
Il y a un problème avec la beta 2 de paranoid, le module GPS semble ne pas être inclus... En attendant que ça soit corrigé, je pense qu'il vaut mieux retourner sur la beta1 :/

nhibel said:
Salut !
Il y a un problème avec la beta 2 de paranoid, le module GPS semble ne pas être inclus... En attendant que ça soit corrigé, je pense qu'il vaut mieux retourner sur la beta1 :/
Click to expand...
Click to collapse
Hello !
Finalement j'ai fait un wipe complet et réinstallé la beta 2 et les gapps 4.4.4... Mais le gps fonctionne très bien pour moi

Known issue in Beta 2
http://forum.xda-developers.com/showpost.php?p=55707753&postcount=3691
In Beta 1 GPS is working but there are Problems with the camera (taking 10 seconds to Start, also for Flashlight)

Targunitoth said:
Known issue in Beta 2
http://forum.xda-developers.com/showpost.php?p=55707753&postcount=3691
In Beta 1 GPS is working but there are Problems with the camera (taking 10 seconds to Start, also for Flashlight)
Click to expand...
Click to collapse
Hey, thanks for your answer.
IDK why, but the GPS is working on my BETA2.. Is this bad ?

of course it is good if it is working
Are you sure you are on Beta 2 and not getting your possition over WLAN?
Did you do a clean install of Beta 2 or first with Beta 1 and then Update?
Is your Problem
But Maps "stopped working" everytime
Click to expand...
Click to collapse
solved in the meantime?
If not, try to format /system (CARE YOU LOSE DATA) and then flash GAPPS again
http://forum.xda-developers.com/showthread.php?t=2397942
I prefer MICRO MODULAR PACKAGE or PICO MODULAR PACKAGE
Edit: Maybe only format /system could not be enought:
http://android.stackexchange.com/questions/65762/how-do-i-remove-gapps-from-cyanogenmod
(This is also for other Roms then Cyanogenmod)

Yep that's exactly what I did and the initial problem is solved
The thing was that the "system wipe" option was not in the initial tab of my recovery, I had to look around a bit (at first I was only factory reseting it, I don't really remember, but it wasn't exactly a system wipe, maybe formating the data..?)
Anyway after that everything worked fine !
IDK anything about WLAN..? But my gps is working, and I successfuly flashed BETA2 (even paraonoidandroidOTA says I'm up to date..)
So, I don't really understand why is it working ?

i need help
sKY'HER said:
Yep that's exactly what I did and the initial problem is solved
The thing was that the "system wipe" option was not in the initial tab of my recovery, I had to look around a bit (at first I was only factory reseting it, I don't really remember, but it wasn't exactly a system wipe, maybe formating the data..?)
Anyway after that everything worked fine !
IDK anything about WLAN..? But my gps is working, and I successfuly flashed BETA2 (even paraonoidandroidOTA says I'm up to date..)
So, I don't really understand why is it working ?
Click to expand...
Click to collapse
ur lucky D:

stuck at sony boot logo during first boot after installing paranoid android 4.6 beta
just installed pa 4.6 beta3 ,gapps, almost 15minutes still cellphones stuck at sony logo.
i have unlocked boot loader, rooted,installed cwm recovery i am little but worried please help me

impradeepy said:
just installed pa 4.6 beta3 ,gapps, almost 15minutes still cellphones stuck at sony logo.
i have unlocked boot loader, rooted,installed cwm recovery i am little but worried please help me
Click to expand...
Click to collapse
First boot always tooks a bit longer, but 15 min is too long i suppose...
Make a new clean flash...
wiping all data + cache + dalvik cache

Cheers mate all working after 30mins i used fastboot mode and reboot into recovery and repeated all steps once again using it from past 2hours no fc,no random reboots, gps,wireless working,screenshot fixed all good thanks paranoid android
Sent from my Xperia S using XDA Free mobile app

I have a similar issue. I tried to udpate via Paranoid OTA app from beta 3 to beta 4 (same issues on b2 => b3) and then I press install and reboot. My phone stucks at the rebooting... animation.
After Hardreset (Power + Upper-Volume button) is restarts and flashes the new rom.

Today again after clean flashing beta 4 once again stuck at Sony logo I think boot loader is not getting boot.IMG itself and after hard reset its boot up also not able to enter into cwm recovery m using dual boot Ubuntu with windows 8.1 and due to drivers issues m not able to flash the kernel img before flashing the ROM please help me
Sent from my Xperia S using XDA Free mobile app

impradeepy said:
Today again after clean flashing beta 4 once again stuck at Sony logo I think boot loader is not getting boot.IMG itself and after hard reset its boot up also not able to enter into cwm recovery m using dual boot Ubuntu with windows 8.1 and due to drivers issues m not able to flash the kernel img before flashing the ROM please help me
Sent from my Xperia S using XDA Free mobile app
Click to expand...
Click to collapse
There are more people having this problem, including me
After the new Update (BETA-4) no boot into CWM is posible
There are two suggestions:
If you can boot normaly, you can install TWRP
the second suggestion is to flash boot.img with fastboot
If you got bootloop you have to try the second one...
What problems do you have with your drivers?
There are a lot of guides how to install drivers while using Windows 8.1

stuck at sony boot logo
Targunitoth said:
There are more people having this problem, including me
After the new Update (BETA-4) no boot into CWM is posible
There are two suggestions:
If you can boot normaly, you can install TWRP
the second suggestion is to flash boot.img with fastboot
If you got bootloop you have to try the second one...
What problems do you have with your drivers?
There are a lot of guides how to install drivers while using Windows 8.1
Click to expand...
Click to collapse
after hard reset i can boot normaly...but if i reboot or shutdown then again i have to do hard reset i will install twrp now,,, i want to flash boot.img using fastboot my problem is whenever i try to connect in fastboot using windows then blue light changes into yellow means no proper connectivity with usb i do not have android sdk atm.
2. on ubuntu i can enter into fastboot blue light stable but only android tools 4.2.2 available in the repository so when ever i type fastboot reboot-bootloader then stuck on waiting device do not why this happening on linux help me

impradeepy said:
after hard reset i can boot normaly...but if i reboot or shutdown then again i have to do hard reset i will install twrp now,,, i want to flash boot.img using fastboot my problem is whenever i try to connect in fastboot using windows then blue light changes into yellow means no proper connectivity with usb i do not have android sdk atm.
2. on ubuntu i can enter into fastboot blue light stable but only android tools 4.2.2 available in the repository so when ever i type fastboot reboot-bootloader then stuck on waiting device do not why this happening on linux help me
Click to expand...
Click to collapse
You just need this one/two commands:
fastboot flash boot boot.img [ENTER]
fastboot reboot [ENTER] (optional)
take the boot.img from BETA-3

Targunitoth said:
You just need this one/two commands:
fastboot flash boot boot.img [ENTER]
fastboot reboot [ENTER] (optional)
take the boot.img from BETA-3
Click to expand...
Click to collapse
finaly i installed flashtool on ubuntu flashed boot.img saved on my hdd(extracted from pa 4.6beta4), then again clean install of rom but same error after every reboot still i have to do hard reset searching on google

impradeepy said:
finaly i installed flashtool on ubuntu flashed boot.img saved on my hdd(extracted from pa 4.6beta4), then again clean install of rom but same error after every reboot still i have to do hard reset searching on google
Click to expand...
Click to collapse
You Mean still no recovery?
The Problem is, that the CWM in PA 4.6 BETA-4 is broken.
You should extract the boot.img from BETA-3

Targunitoth said:
You Mean still no recovery?
The Problem is, that the CWM in PA 4.6 BETA-4 is broken.
You should extract the boot.img from BETA-3
Click to expand...
Click to collapse
i flashed boot.img from beta3 only one time reboot into recovery then again same problem hard reset then i can enter into using vol+ key if not then normal boot

impradeepy said:
i flashed boot.img from beta3 only one time reboot into recovery then again same problem hard reset then i can enter into using vol+ key if not then normal boot
Click to expand...
Click to collapse
Hmm, thats wired, after a clean flash boot you shouldn't get bootloop... did you wait long enough? First boot always takes a few Minutes...
You should flash boot.img from beta3,
do a clean installation of beta4
and flash boot.img from beta3 again
if you still got problems you should flash boot.img from beta3 and then install some other ROM...
Edit: to get right of your battery draining problem, you could install Pico Gapps: http://forum.xda-developers.com/showthread.php?t=2397942 without google search

[HELP]S4 mini i9192 Recovery Mode Not Working

My s4 mini trailed off suddenly and only goes up samsung version (GT-I9192) I wanted to enter Recovery Mode but he leaves the dead android with an error try updating the firmware but when entering the recovery the problem persists, Beforehand thank you very much
No can place a photo
the error is
(in yellow colour)
#MANUAL MODE#
-- appling multi-CSC...
Applied the CSC-code: TTT
did not match sized ^/system/csc/common/system/csc/others.xml (no data available)
Note: i am Apply one firmware TTT and problem persists

xtunner said:
My s4 mini trailed off suddenly and only goes up samsung version (GT-I9192) I wanted to enter Recovery Mode but he leaves the dead android with an error try updating the firmware but when entering the recovery the problem persists, Beforehand thank you very much
No can place a photo
the error is
(in yellow colour)
#MANUAL MODE#
-- appling multi-CSC...
Applied the CSC-code: TTT
did not match sized ^/system/csc/common/system/csc/others.xml (no data available)
Note: i am Apply one firmware TTT and problem persists
Click to expand...
Click to collapse
Have you installed Custom recovery before?
Follow the instructions provided for our device in this Forum.
I recommend you to Use F4k's TWRP Recovery which is available in Basketbuild.
Best of luck

Ronussks said:
Have you installed Custom recovery before?
Follow the instructions provided for our device in this Forum.
I recommend you to Use F4k's TWRP Recovery which is available in Basketbuild.
Best of luck
Click to expand...
Click to collapse
Bro can`t install any custom recovery, in odin install normal and reset to enter in recovery mode get the error say up, installing firmware(sammobile) the problem persist, in odin is OK perfect installing reset = error recovery and inifinite reset
very thx much for you reply, and need help

xtunner said:
Bro can`t install any custom recovery, in odin install normal and reset to enter in recovery mode get the error say up, installing firmware(sammobile) the problem persist, in odin is OK perfect installing reset = error recovery and inifinite reset
very thx much for you reply, and need help
Click to expand...
Click to collapse
Here try out the instruction provided in the following link:
http://www.s4miniarchive.com/2014/0...-install-cwm-recovery-s4-mini-duos-i9192.html
It worked out for me. Download those files and follow the instructions.
Hope it works.
Good luck

Ronussks said:
Here try out the instruction provided in the following link:
It worked out for me. Download those files and follow the instructions.
Hope it works.
Good luck
Click to expand...
Click to collapse
no, when you enter the recovery mode get the same problem bro

xtunner said:
no, when you enter the recovery mode get the same problem bro
Click to expand...
Click to collapse
Did you fix it bro, since i'm having that problem too and still haven't got a clue so far

Questions
Me pasa lo mismo,todavia no encuentro solucion no me deja hacer absolutamente nada en modo recovery me tira errores y al reiniciar se queda en el logo,se prende y se apaga.Solamente entra en modo dowload,si alguien me puede ayudar lo agradeceria mucho

how to root stock rom 8.0

Guys, my cell phone has version 8.0 stock. Unlocked and installed TWRP (3.2.1.0 and 3.2.1 64bit), it turns out that if I install the Magisk or SuperSu, or even I make any change in the system how to install the Gapps, the system does not start, it is on the screen of the bootloader warning unlocked.
From what I read in the topics would be simple, is it because it is version 8.0? Could someone help me do the root? Just for the record, the phone is not blicker, I reinstalled the stock ROM and blockaded the bootloader again. It is worth informing also that even unlocked and with TWRP installed, however without any changes, the system goes through the warning message of the bootloader unlocked and starts normally.

Just backup system and boot partitions with TWRP to SD card, wipe everything, make format, reboot recovery.
Restore your backup, flash Magisk 16 and f2fs module.
Enjoy your rooted phone

davidsonsjesus said:
Guys, my cell phone has version 8.0 stock. Unlocked and installed TWRP (3.2.1.0 and 3.2.1 64bit), it turns out that if I install the Magisk or SuperSu, or even I make any change in the system how to install the Gapps, the system does not start, it is on the screen of the bootloader warning unlocked.
From what I read in the topics would be simple, is it because it is version 8.0? Could someone help me do the root? Just for the record, the phone is not blicker, I reinstalled the stock ROM and blockaded the bootloader again. It is worth informing also that even unlocked and with TWRP installed, however without any changes, the system goes through the warning message of the bootloader unlocked and starts normally.
Click to expand...
Click to collapse
St.Noigel said:
Just backup system and boot partitions with TWRP to SD card, wipe everything, make format, reboot recovery.
Restore your backup, flash Magisk 16 and f2fs module.
Enjoy your rooted phone
Click to expand...
Click to collapse
In my case, to root stock 8.0, no need to wipe or format anything.
Just backup system and boot partitions with TWRP, and then restore them back to your z2p before flash Magisk.zip. So, no need flash f2fs module, too.
Works like a charm for me.

davidsonsjesus said:
Guys, my cell phone has version 8.0 stock. Unlocked and installed TWRP (3.2.1.0 and 3.2.1 64bit), it turns out that if I install the Magisk or SuperSu, or even I make any change in the system how to install the Gapps, the system does not start, it is on the screen of the bootloader warning unlocked.
From what I read in the topics would be simple, is it because it is version 8.0? Could someone help me do the root? Just for the record, the phone is not blicker, I reinstalled the stock ROM and blockaded the bootloader again. It is worth informing also that even unlocked and with TWRP installed, however without any changes, the system goes through the warning message of the bootloader unlocked and starts normally.
Click to expand...
Click to collapse
NO need wipe anything...
Try it before all:
1: Start Recovery (TWRP)
2: Enter in ADVANCED > TERMINAL
3: Run commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
4: Flash Magisk zip
5: Reboot.

Fabio Feher said:
NO need wipe anything...
Try it before all:
1: Start Recovery (TWRP)
2: Enter in ADVANCED > TERMINAL
3: Run commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
4: Flash Magisk zip
5: Reboot.
Click to expand...
Click to collapse
Not tested by me. But look most simple :fingers-crossed::laugh:
Tkx:fingers-crossed:

Fabio Feher said:
NO need wipe anything...
Try it before all:
1: Start Recovery (TWRP)
2: Enter in ADVANCED > TERMINAL
3: Run commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
4: Flash Magisk zip
5: Reboot.
Click to expand...
Click to collapse
BR:
Muito bom, funcionou perfeitamente aqui!
Me diga: para instalar o xposed, como faço? Só abrir o TWRP e flash o .ZIP? Ou algum desses comandos?
US:
Very good, worked perfectly here!
Tell me: to install xposed, how do I? Just open TWRP and flash the .ZIP? Or any of these commands?

RafaelFUN said:
BR:
Muito bom, funcionou perfeitamente aqui!
Me diga: para instalar o xposed, como faço? Só abrir o TWRP e flash o .ZIP? Ou algum desses comandos?
US:
Very good, worked perfectly here!
Tell me: to install xposed, how do I? Just open TWRP and flash the .ZIP? Or any of these commands?
Click to expand...
Click to collapse
Only flash.

davidsonsjesus said:
Only flash.
Click to expand...
Click to collapse
BR:
Após fazer o root, reinicio o dispositivo, entro no TWRP, flash o .ZIP do framework, reinicio o dispositivo, instalo o xposed installer, só que o app fala que o framework não esta instalado. Como posso fazer?
US:
After doing the root, reboot the device, I go into TWRP, flash the .ZIP of the framework, reboot the device, install the xposed installer, but the app says that the framework is not installed. How can I do it?

RafaelFUN said:
After doing the root, reboot the device, I go into TWRP, flash the .ZIP of the framework, reboot the device, install the xposed installer, but the app says that the framework is not installed. How can I do it?
Click to expand...
Click to collapse
Install the zip from the forum xposed not from the forum Magisk

Mark2014 said:
In my case, to root stock 8.0, no need to wipe or format anything.
Just backup system and boot partitions with TWRP, and then restore them back to your z2p before flash Magisk.zip. So, no need flash f2fs module, too.
Works like a charm for me.
Click to expand...
Click to collapse
Over which 8.0 security patch update you've performed this method? (BTW, recommended by @Junior Passos as well) did you have Xposed flashed and working?...
Sent from my Moto Z2 Play using XDA Labs

The Analog Kid said:
Over which 8.0 security patch update you've performed this method? (BTW, recommended by @Junior Passos as well) did you have Xposed flashed and working?...
Sent from my Moto Z2 Play using XDA Labs
Click to expand...
Click to collapse
i'm no longer use stock anymore.

Mark2014 said:
i'm no longer use stock anymore.
Click to expand...
Click to collapse
Ok... But I was hoping for you to share your stock days experience. Would you, please? If possible?... It still can be helpful.
Sent from my Moto Z2 Play using XDA Labs

The Analog Kid said:
Ok... But I was hoping for you to share your stock days experience. Would you, please? If possible?... It still can be helpful.
Sent from my Moto Z2 Play using XDA Labs
Click to expand...
Click to collapse
I was stayed in stock rom very short time.
Because FireHoundOS is better than stock much.

CLOSED

CLOSED

CLOSED

CLOSED

dl link = e404

kischon said:
dl link = e404
Click to expand...
Click to collapse
thx for reporting, fixed

Good morning !
thanks for sharing and working for our Samsung
sm-g973F/DS
I tried to install the kernel and the rom but I am in a situation where the phone does not react anymore when I want to boot it normall
I can only access in download or twrp mode
The classic start does not react
I tried flashing the official Samsung rom via odin, and tried to install the BLASTUI rom several times but nothing works
I proceeded like this on
twrp (latest version) and vbmeta via odin
I deleted the data, and the custom rom that I had
then I flashed the multidisiabler then the bl and finally the rom
but then impossible to start it normally
the phone does not react and remains black
what should i do please?

@Blast752 can you please consider update your installation instructions using my one below.
I think it's more clear & easy to understand because it took me long time to understand your one.
you could make some changes to it.
I think it will help because lot people seem to get bootloop. maybe they dont follow the right steps
0. Unlock bootloader
Fastboot. long press vol up. unlock (wipe phone)
Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again
1. TWRP: Fastboot: Odin Flash TWRP .tar latest from corsicanu (AP) + Avbmeta .tar (CP)
(disable auto reboot)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
After flash finish. Press vol up + bixby + power to force boot straight in TWRP
2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
3. Install latest bootloader (corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems
Is bootloader flash necessary now? or before TWRP?
4. Flash BlastUI Rom ZIP in twrp
5. (optional) safetynet fix + thundertweaks app

fatjoez said:
@Blast752 pouvez-vous envisager de mettre à jour vos instructions d'installation en utilisant celles ci-dessous.
Je pense que c'est plus clair et plus facile à comprendre car il m'a fallu beaucoup de temps pour comprendre le vôtre.
vous pouvez y apporter quelques modifications.
Je pense que cela aidera parce que beaucoup de gens semblent avoir le bootloop. peut-être qu'ils ne suivent pas les bonnes étapes
0. Déverrouiller le chargeur de démarrage
Démarrage rapide. appuyez longuement sur le volume vers le haut. déverrouiller (effacer le téléphone)
Redémarrez, connectez-vous à Internet pour supprimer RMM (vaultkeeper) et réactivez le déverrouillage OEM
1. TWRP : Fastboot : Odin Flash TWRP .tar le plus récent de corsicanu (AP) + Avbmeta .tar (CP)
(désactiver le redémarrage automatique)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
Après la finition flash. Appuyez sur vol up + bixby + power pour forcer le démarrage directement dans TWRP
2. TWRP : Wipe Format data + flash multidisabler zip (pour désactiver le cryptage/la sécurité)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
3. Installez le dernier bootloader (corsicanu) : dans Fastboot Odin .tar (BL) ou TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems
Le flash du chargeur de démarrage est-il nécessaire maintenant ? ou avant TWRP ?
4. Flash BlastUI Rom ZIP en twrp
5. (facultatif) correctif du filet de sécurité + application Thundertweaks
Click to expand...
Click to collapse
I followed scrupulously step by step exactly but it does not give me anything. Still inactive and black screen with the possibility of flashing twrp and accessing download mode, but that's it.
I don't know what's wrong ..
is it because I own the G973F / DS?
normally with odin I can catch up with this and flash the Samsung firmware and start over but I am stuck with a black screen that does not react if we want to turn it on normally

FabienGege said:
Good morning !
thanks for sharing and working for our Samsung
sm-g973F/DS
I tried to install the kernel and the rom but I am in a situation where the phone does not react anymore when I want to boot it normall
I can only access in download or twrp mode
The classic start does not react
I tried flashing the official Samsung rom via odin, and tried to install the BLASTUI rom several times but nothing works
I proceeded like this on
twrp (latest version) and vbmeta via odin
I deleted the data, and the custom rom that I had
then I flashed the multidisiabler then the bl and finally the rom
but then impossible to start it normally
the phone does not react and remains black
what should i do please?
Click to expand...
Click to collapse
yeah bro latest magisk canary problem, tomorrow i will upload a version with downgraded magisk (v23 stable)

fatjoez said:
@Blast752 can you please consider update your installation instructions using my one below.
I think it's more clear & easy to understand because it took me long time to understand your one.
you could make some changes to it.
I think it will help because lot people seem to get bootloop. maybe they dont follow the right steps
0. Unlock bootloader
Fastboot. long press vol up. unlock (wipe phone)
Reboot connect internet to remove RMM (vaultkeeper) & enable oem unlock again
1. TWRP: Fastboot: Odin Flash TWRP .tar latest from corsicanu (AP) + Avbmeta .tar (CP)
(disable auto reboot)
https://twrp.me/samsung/samsunggalaxys10e.html
https://downloads.corsicanu.ro/samsung/vbmeta-27.10.2020/
After flash finish. Press vol up + bixby + power to force boot straight in TWRP
2. TWRP: Wipe Format data + flash multidisabler zip (to disable encryption/security)
https://forum.xda-developers.com/ga...ynos/g97xf-multi-disabler-encryption-t3919714
3. Install latest bootloader (corsicanu): in Fastboot Odin .tar (BL) or TWRP zip
https://github.com/corsicanu/9820-bootloaders_and_modems
Is bootloader flash necessary now? or before TWRP?
4. Flash BlastUI Rom ZIP in twrp
5. (optional) safetynet fix + thundertweaks app
Click to expand...
Click to collapse
ok bro thanks

FabienGege said:
I followed scrupulously step by step exactly but it does not give me anything. Still inactive and black screen with the possibility of flashing twrp and accessing download mode, but that's it.
I don't know what's wrong ..
is it because I own the G973F / DS?
normally with odin I can catch up with this and flash the Samsung firmware and start over but I am stuck with a black screen that does not react if we want to turn it on normally
Click to expand...
Click to collapse
change kernel or use stock one, latest magisk canary versions gives problems with samsung atm

Blast752 said:
ouais bro dernier problème magisk canary, demain je téléchargerai une version avec magisk rétrogradé (v23 stable)
Click to expand...
Click to collapse
Will it be a zip flashed via twrp?
In your opinion why this blocked with my Samsung (SM-G973F / DS).
THANKS SO MUCH FOR SHARING YOUR KNOWLEDGE!

Blast752 said:
changer le noyau ou utiliser un stock, les dernières versions de magisk peuvent résoudre des problèmes avec samsung atm
Click to expand...
Click to collapse
I will go through the process by changing the kernel several times.
staying of course with the g973 kernels.
I'll keep you informed .
thank you for your speed

FabienGege said:
I will go through the process by changing the kernel several times.
staying of course with the g973 kernels.
I'll keep you informed .
thank you for your speed
Click to expand...
Click to collapse
Did you change kernel? Problem fixed?
If it fix please share instructions & link kernel used

fatjoez said:
Did you change kernel? Problem fixed?
If it fix please share instructions & link kernel used
Click to expand...
Click to collapse
Hello .
I tried several different kernels in g973F ..... some wont flash others yes, but that didn't fix the problem.
I still now have access to the loading screen when the phone is off, but I still can't turn it on.
only download mode and i can flash twrp to access it but that's it.

I succeeded !! My phone works after several days of hard work !!!
I am very happy!
I followed fatjoez's links for vmbeta and multidisiabler and it worked!
Many thanks for the links !!
resolu .

FabienGege said:
J'ai réussi !! Mon téléphone fonctionne après plusieurs jours de travail acharné !!!
Je suis très heureux!
J'ai suivi les liens de fatjoez pour vmbeta et multidisiabler et ça a marché !
Merci beaucoup pour les liens !!
résolu.
Click to expand...
Click to collapse

The rom and excellent but the phone restarts itself

FabienGege said:
I succeeded !! My phone works after several days of hard work !!!
I am very happy!
I followed fatjoez's links for vmbeta and multidisiabler and it worked!
Many thanks for the links !!
resolu .
Click to expand...
Click to collapse
great
can you please post the exact instructions for how you fix it so other people can recover too?
which steps did you follow & which buttons pressed ~~

Start in download mode via the volume button - and bixby while plugging it into my pc.
I flashed the last twrp and the Vmbeta with Fat Joez links (disable reboot on Odin)
Then volume - bixby and power then once the screen is off volume + bixby and power at the same time.
On twrp Factory data reset.
Flashed multidisiabler to twrp, reboot to twrp.
Then flash the rom, wipe data and reboot the system