Develop Bugs

[How to root] Honor 6x with Magisk 14 - B367 (fast method for professional users)

[How to root] Honor 6x -B367- with Magisk 14
(fast method for professional users)
Use TWRP Recovery from the attachment.
Make a Backup first.
Uninstall SuperUser App-
[*]in TWRP flash unSu.zip-
[*]with TWRP restore the Stock Kernel (Boot Partition) from a backup-
[*]flash in TWRP Magisk-v14.0.zip-
[*]the magisk app is automatic installed .
[*]Reboot-
[*]flash in TWRP BusyBox-Magisk-1.25.zip-
[*]for Ad Block Plus first install the app and then flash the zip-
[*]if the flashing fails, please add the modules in the Magisk Manager App.
[*]Don't experiment with Xposed!
[*]The SafetyNet is thereby lost.
​
TWRP:
https://mega.nz/#!9l0jFQaZ!WJipSNyrecAuyok4Wpp_NM6fxWyFPWwn2aP34tW50sU

There's no point in installing MagiskManager. When you flash Magisk.zip, it automatically installs the manager apk. If your phone is not rooted, all you have to do is to flash the Magisk.zip in TWRP and that's it.

Thanks for your feedback. I will change the tuto immediately.

Can somebody share the boot.img for c432b367?
Thanks guys!

actually you can fix safetynet in honor 6x:
1. disable Hisuite HDB in settings>advanced settings>security
2. Go to developer options and enable adb debuging
3. go to apps and go to google play services and force stop it. and clear data (you know how to do it...)
4. run safetynet test
5. profit?
NOTE:you'll do this again if you reboot it except number 1...
EDIT: it works for me in my stock rom but IDK in other roms...
https://i.imgur.com/J8obP1l.png

I keep getting "error: cannot load 'berlin311'" when trying to flash twrp
Please help

If we have twrp from open kirin team installed, do we still need to flash this twrp or can use the same one?

Just realized that this is the same OpenKirin TWRP. Proceeding with Magisk for the first time now

Any thoughts on the error loading twrp?

Challah said:
Any thoughts on the error loading twrp?
Click to expand...
Click to collapse
I did not face any issue.. Was smooth. I am using magisk now

shashank1320 said:
I did not face any issue.. Was smooth. I am using magisk now
Click to expand...
Click to collapse
Sadly that doesn't help me much

Challah said:
Sadly that doesn't help me much
Click to expand...
Click to collapse
Which version of the are you using. I had one from open kirin team. Are you trying to boot to recovery with USB connected? Are you on emui 4/5?

Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.

Challah said:
Emui 5, tried using both versions, the one from your thread and the one from the kirin team thread.
Click to expand...
Click to collapse
Both are same file. Not sure why this issue. I flashed today couple of hours ago to install magisk as i did fload to be on stock.

I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img

Challah said:
I have tried all the guides, same issue each time.
My phone is unlocked, but I get an error loading the img
Click to expand...
Click to collapse
Did you try relocking amd unlocking the bootloader again? Try once buddy

I figured it out, I had adb installed previously and it was opening it from a different place than I expected, so Berlin was in the wrong folder.

shashank1320 said:
Did you try relocking amd unlocking the bootloader again? Try once buddy
Click to expand...
Click to collapse
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.

ChinHon said:
Only unlocking with unlock code. That's enough. Then activate OEM unlock and Debugging Mode in the Settings.
Click to expand...
Click to collapse
Working for me buddy. I was helping him as he had issue
Thanks for this..i got the confidence and was able to install magisk without issues which was not doing earlier

When on the step to flash busybox_magisk I get notified that magisk is not installed, magisk needs to be installed first, and then error "Updater process ended with ERROR: 1 Error installing zip file '/external_sd/BusyBox-Magisk-1.25.zip'?
I flashed magisk again, rebooted to recovery, tried busybox-magisk again, same error.

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G930A Flat Odin Factory FIrmware Downloads
G930AUCU4CRI2_8.0_4File_USA (AT&T).7z
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar

Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good

jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
It is not possible to install Magisk, because he is installing his own boot.img and i will be stuck at bootloop? Everything is working by the way, many thanks, but i flashed Viper4Android, it doesn't work, asks for drivers all the time.

Brilliant! Many thanks as I just got this device a few days ago so the timing on this guide is perfect! I had a little trouble after I flashed the BL_ENG_BOOTLOADERS where it constantly boot-looped but once I was able to get it back into download mode (holding volume down, home button, and power button) and start again from step 5 of the unrooting process everything worked according to plan then. I'm happy to announce I've rooted, customized, and unrooted thanks to the simple ease in which this method works so many thanks to jrkruse!

SCUZZY1337 said:
It is not possible to install Magisk, because he is installing his own boot.img and i will be stuck at bootloop? Everything is working by the way, many thanks, but i flashed Viper4Android, it doesn't work, asks for drivers all the time.
Click to expand...
Click to collapse
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified

jrkruse said:
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified
Click to expand...
Click to collapse
Will try, thank you, magisk ain't work right?
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
jrkruse said:
If you just download viper4 android in xda labs store and install drivers via the app it works fine
Sent using some kind of device I modified
Click to expand...
Click to collapse
The app is installing the driver for ages and never stops, why?

SCUZZY1337 said:
Will try, thank you, magisk ain't work right?
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
The app is installing the driver for ages and never stops, why?
Click to expand...
Click to collapse
Reboot your phone

jrkruse said:
Reboot your phone
Click to expand...
Click to collapse
Installed thru twrp, works perfectly.

Added ATT factory firmware to the OP

jrkruse said:
Added ATT factory firmware to the OP
Click to expand...
Click to collapse
What?

SCUZZY1337 said:
What?
Click to expand...
Click to collapse
What is your what for. I didnt know adding factory firmware to OP needed an explanation
Sent using some kind of device I modified

jrkruse said:
What is your what for. I didnt know adding factory firmware to OP needed an explanation
Sent using some kind of device I modified
Click to expand...
Click to collapse
Is it possible to install magisk?

SCUZZY1337 said:
Is it possible to install magisk?
Click to expand...
Click to collapse
No it is not
Sent using some kind of device I modified

jrkruse said:
No it is not
Sent using some kind of device I modified
Click to expand...
Click to collapse
Could you please tell me the difference between V4 and V8 bootloaders?

SCUZZY1337 said:
Could you please tell me the difference between V4 and V8 bootloaders?
Click to expand...
Click to collapse
Yes v8 bootloaders means the party is over enjoy totally stock because you are not rooting or anything else unless a v8 eng boot gets released and i doubt it because v5 v6 and v7 never got released
Sent using some kind of device I modified

jrkruse said:
Yes v8 bootloaders means the party is over enjoy totally stock because you are not rooting or anything else unless a v8 eng boot gets released and i doubt it because v5 v6 and v7 never got released
Sent using some kind of device I modified
Click to expand...
Click to collapse
Idk i hav V4 and i dont have any lags, everything runs super smooth.

Bonjour,
Il est impossible de télécharger le fichier file:///C:/Users/Yves%20local/Downloads/S7_S7E_ROOT_UNROOT_ADB_TOOLS(1).7z. Le téléchargment démare et puis echec impossible de télécharger???
Merci de votre aide et bravo pour votre travail.

pyveswebsud said:
Bonjour,
Il est impossible de télécharger le fichier file:///C:/Users/Yves%20local/Downloads/S7_S7E_ROOT_UNROOT_ADB_TOOLS(1).7z. Le téléchargment démare et puis echec impossible de télécharger???
Merci de votre aide et bravo pour votre travail.
Click to expand...
Click to collapse
English is required use on xda. Please translate to English
Sent using some kind of device I modified

how compatible do you think this would be with the s7active (native to AT&T carrier) ?
especially now the S7active has recently been updated to Oreo, which also updated its bootloader to v4 ...
worth a go ?

miniminus said:
how compatible do you think this would be with the s7active (native to AT&T carrier) ?
especially now the S7active has recently been updated to Oreo, which also updated its bootloader to v4 ...
worth a go ?
Click to expand...
Click to collapse
Unless you have an eng recovery for oreo for the active and an eng boot.img for oreo you won’t be able to do anything
Sent using some kind of device I modified

Root and Magisk on Oreo (oct security patch)

After using this phone for a while I decided to root it.
I unlocked bootloader, installed TWRP and flashed Magisk, but all I get is bootloop or stuck on bootlogo (your device has been unlocked.....)
SOLUTION
https://forum.xda-developers.com/moto-z-play/how-to/guide-how-to-magisk-root-xposed-oreo-8-t3743273
Applicable also for moto Z2 Play, just with appropriate recovery, of course
Please note the updates to the first post. It may be necessary to do the procedure twice.
I tried these TWRPs:
3.2.3.0
64bit 3.2.1
and TWRP and modified magisk from https://forum.xda-developers.com/z2-play/how-to/guide-twrp-root-t3667769
I tried all TWRPs with both modified magisk and official v18.
I have XT1710-09 with Oreo and October security patch
Is there a way to root this lastest firmware?
Thanks

Klen2 said:
I tried these TWRPs:
3.2.3.0
64bit 3.2.1
and TWRP and modified magisk from https://forum.xda-developers.com/z2-play/how-to/guide-twrp-root-t3667769
I tried all TWRPs with both modified magisk and official v18.
I have XT1710-09 with Oreo and October security patch
Is there a way to root this lastest firmware?
Thanks
Click to expand...
Click to collapse
I did 3.2.3-0 TWRP method (by Junior Passos) on my XT1710-06 device with 8.0 on August 1 security patch (purposefully neglected updating any further cause method was tested exactly up to August patch according to Passos) and everything seems working pretty fine for a month now. Think I've installed no Magisk modules other than Xposed systemless yet and I've no interest in SafetyNet as well, so not deeply tested either. Don't know for sure, but I guess there's a good chance for such method to work on October patch too. Just be sure to perform every step as it is now in the 3.2.3-0 OP. One word of advice: after performing TWRP backup, look for it in /system/media and move it to both external and internal SDcards just in case something goes wrong (usually because of a missed step, I can say)... Also: I recommend to install Magisk v17.1 first time; then, if you want, update to v18 but right from the installer...
Sent from my Moto Z2 Play using XDA Labs

Strange, I have zero magisk problems when using the latest stock rom. Flash in twrp, done, no issues. However, it could be because I first back up boot and system and then restore them with twrp before rooting(this removes encryption).

Have these steps worked for me...
1.)Flash TWRP using Fastboot
2.)Go to TWRP/Settings and open Terminal.
3.)Run both of following commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
Click to expand...
Click to collapse
4.)Flash Magisk-v17.1.zip
5.)Repeat step 2 and 3 dont wipe.
6.)Start
NOTE: before Reinstall stock or uninstall Magisk.

I did the Junior Passos method of doing the backup, and everything is working like a charm.

Cupcake 1.5 said:
Strange, I have zero magisk problems when using the latest stock rom. Flash in twrp, done, no issues. However, it could be because I first back up boot and system and then restore them with twrp before rooting(this removes encryption).
Click to expand...
Click to collapse
Hi, Could you please, tell me which stock ROM you are using and where is possible to get it?
First time I am having problem with Magisk, never had on other phones.
Problem = Bootlop

OldUncle said:
Hi, Could you please, tell me which stock ROM you are using and where is possible to get it?
First time I am having problem with Magisk, never had on other phones.
Problem = Bootlop
Click to expand...
Click to collapse
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.

Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
Perfect!
Thank you very much!
The only solution which worked!
Finally I got full control on my Z2 Play.

Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
Regarding backup, this is done through the stock ROM correct (Settings --> System --> Backup to Google Drive).
Thanks,
smithmal

Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
This worked perfectly on my Moto Z2 XT1710-06 with Oreo 8.0 when no other options worked.
Flash or Boot into TWRP
Backup System and Boot partitions in TWRP
Restore System and Boot Partitions in TWRP (note I had to enable R/W access in TWRP to restore the system partition)
Flash Magisk-v19.3.zip
Reboot
That is it. Now Rooted and passes all SafteyNet test. No more restricted apps. Even Google Pay now works.
Thank You.

sick
Cupcake 1.5 said:
It's not what rom but, how you do it. When on stock ROM, it is encrypted so you must first back up system and boot and then immediately restore them, this remove encryption. Now flash magisk and it will work.
Click to expand...
Click to collapse
your method worked like charm, thanks alot man

Tool for Lenovo Z5 Pro GT [L78032]

use only with L78032
Z5_Pro_GT_TOOL

Unlocked and TWRP installed, but...
Everything worked great (didn't use your batch file, pulled the files and flashed manually) but now the system just sits at the Lenovo logo after the "unlocked device" warning and never boots. I can see the filesystem from within TWRP but nothing works to get it to boot, and this is only a secondary phone so I didn't try to do a backup before flashing anything...
You wouldn't happen to have a flashable stock firmware for this thing, would you? It's a long shot to ask, I know, but now I basically have a brick with TWRP installed lol. I have the 8.1 Qualcomm firmware in a QPST zip file, but the QFIL tool never works and I have no idea how to build firmware using the files inside the zip.
Any advice?
Thanks either way, at least I was able to unlock and flash TWRP. :good:

noobly_dangers said:
Everything worked great (didn't use your batch file, pulled the files and flashed manually) but now the system just sits at the Lenovo logo after the "unlocked device" warning and never boots. I can see the filesystem from within TWRP but nothing works to get it to boot, and this is only a secondary phone so I didn't try to do a backup before flashing anything...
You wouldn't happen to have a flashable stock firmware for this thing, would you? It's a long shot to ask, I know, but now I basically have a brick with TWRP installed lol. I have the 8.1 Qualcomm firmware in a QPST zip file, but the QFIL tool never works and I have no idea how to build firmware using the files inside the zip.
Any advice?
Thanks either way, at least I was able to unlock and flash TWRP. :good:
Click to expand...
Click to collapse
flash magisk to patch boot file

a601943 said:
flash magisk to patch boot file
Click to expand...
Click to collapse
Unfortunately I can't boot into the phone itself, so patching the boot image won't work with Magisk since you have to use the Magisk Manager app to patch (unless there's some way to do it from recovery or fastboot of which I'm not aware).

Z5_Pro_GT_TOOL link goes 404 not found.

a601943 said:
flash magisk to patch boot file
Click to expand...
Click to collapse
noobly_dangers said:
Everything worked great (didn't use your batch file, pulled the files and flashed manually) but now the system just sits at the Lenovo logo after the "unlocked device" warning and never boots. I can see the filesystem from within TWRP but nothing works to get it to boot, and this is only a secondary phone so I didn't try to do a backup before flashing anything...
You wouldn't happen to have a flashable stock firmware for this thing, would you? It's a long shot to ask, I know, but now I basically have a brick with TWRP installed lol. I have the 8.1 Qualcomm firmware in a QPST zip file, but the QFIL tool never works and I have no idea how to build firmware using the files inside the zip.
Any advice?
Thanks either way, at least I was able to unlock and flash TWRP. :good:
Click to expand...
Click to collapse
I guess you were from ZUI ? It has been warned that you are likely to have bootloop after unlocking bootloader. Try this :
- "format data" using twrp
- boot into system
If that doesn't work, flash custom firmware or GSI. Flash through qfil will be your last resort.

Having the same issues here? I would like to fix the phone where can I get an official phone rom ?

Eu consegui resolver apenas pelo qfil, restaurei a stock ROM, com isso o aparelho iniciou novamente.

Supertitan said:
Having the same issues here? I would like to fix the phone where can I get an official phone rom ?
Click to expand...
Click to collapse
No you tube você consegue uma stock ROM, faça com a versão 10.5 da zui

Root & Xposed on WW_17.1810.1910.73 & Update WW_17.1810.1911.110

Hello i found a little way for have root & and working xposed with no bug on last firmware WW_17.1810.1910.73 & WW_17.1810.1911.110
Stock Recovery
You need adb drviers and unlocked ZenFone 6 on WW_17.1810.1910.73 or WW_17.1810.1911.110
First install last Magisk Manager
Open setting of Magisk and add custom update channel https://github.com/solohsu/magisk_files#custom-update-channel
Download ZenFone6RootXposed-10.73.img or ZenFone6RootXposed-11.110 (i have add stock boot11.110.img, we will need it for next update)
http://www.mediafire.com/folder/skzceszqu8d3j/AsusZenFone6
Now reboot device to bootloader
Code:
adb reboot bootloader
And boot with ZenFone6RootXposed-10.73.img or ZenFone6RootXposed-11.110 (not flash it, your device have a chance to bootloop)
Code:
fastboot boot ZenFone6RootXposed-10.73.img
Code:
fastboot boot ZenFone6RootXposed-11.110.img
The devices reboot automaticly
Go to Magisk and install Magisk, choose direct install
Reboot and Enjoy root
if you want Xposed flash it with magisk :
Riru Core
I use YAHFA
Android 10 ElderDrivers Xposed
And the manager
Xposed Installer​

Good morning
I have tried several times root for Android 10
The Magisk part works smoothly, but the Xposed part never works, producing a bootloop
I have extracted the boot and applied magisk, loaded the Riru Core module, but when loading ElderDrivers, the phone stays in bootloop
Do you know what the reason may be?

Works splendid, great guide!
Tried to use Sandhook first, but ended up with YAHFA instead due some xposed problems (xposed not detected).
Had an old version of Android 9, so i first upgraded it to "UL-ASUS_I01WD-ASUS-16.1220.1909.194-1.1.1" (only supported upgrade path - 9 to 10), then to "UL-ASUS_I01WD-ASUS-17.1810.1910.73-1.1.1-user" (your specified .73)
- Later patching with your img
Thanks

it is impossible
Starting with .73 stock
at the moment I install Riru Yahfa, following the manual, it does not start again, unless install the official boot
the device stays on the Zenfone boot screen without doing anything else
I have tried the version supplied by Magisk, I don't know if you have tried another version

Why will we need the stock boot for the next update? We can't make menully update after root? I just want to make root not install xposed.
Sent from my ASUS_I01WD using Tapatalk

thanks a lot, this a really easy way to get root, but i have a little issue, i had my phone with NO pin code or fingerprint before using this method, and now if i want to ad a pin, password or gesture it simply does not get saved, every time i do the procedure to set the pin it does like if i did nothing, anyone has this issue, or know how to fix it, is there a problem if i hard reset?
any help will be good

In the latest build .110 ctsprofile is false while basicintegrity is true. Is it due to the root or the rom has not been signed by google?

Rom1995 said:
In the latest build .110 ctsprofile is false while basicintegrity is true. Is it due to the root or the rom has not been signed by google?
Click to expand...
Click to collapse
https://zentalk.asus.com/en/discussion/comment/35355/#Comment_35355

baster72 said:
Why will we need the stock boot for the next update? We can't make menully update after root? I just want to make root not install xposed.
Sent from my ASUS_I01WD using Tapatalk
Click to expand...
Click to collapse
just flash ZenFone6RootXposed-10.73 or ZenFone6RootXposed-11.110 and you willl have it
hdsporty50 said:
Good morning
I have tried several times root for Android 10
The Magisk part works smoothly, but the Xposed part never works, producing a bootloop
I have extracted the boot and applied magisk, loaded the Riru Core module, but when loading ElderDrivers, the phone stays in bootloop
Do you know what the reason may be?
Click to expand...
Click to collapse
hdsporty50 said:
it is impossible
Starting with .73 stock
at the moment I install Riru Yahfa, following the manual, it does not start again, unless install the official boot
the device stays on the Zenfone boot screen without doing anything else
I have tried the version supplied by Magisk, I don't know if you have tried another version
Click to expand...
Click to collapse
Don't flash Xposed using Magisk Download, flash it manualy :
EdXposed v0.4.6.0_beta
You will always get bootloop with v0.4.5.1_beta
_______________________________________
UPDATE for 11.110
flash boot.10.73.img for update safe
And do the same with 11.110 files.
Don't forget to add custom update channel in Magisk
And use v0.4.6.0_beta for xposed

Why can't we have any YouTube guides for anything related to this phone?

vernj123 said:
Why can't we have any YouTube guides for anything related to this phone?
Click to expand...
Click to collapse
I want to do it but I don't have another device to record.

Someone try this method to install xposed? I afraid to get bootloop.
Sent from my ASUS_I01WD using Tapatalk

Hi everyone, I hope somebody can help me out to solve an issue I just got with my zenfone,
After using an advise from DaConcho for getting back screen lock after unlocking bootloader I got in another situation.
I followed the instructions from the post and everything was going fine, I boot thought adb with the provided patched boot for Q .110 and that far no issues , when I open magisk manager to download magisk from the alternative source magisk manager prompt to complete the installation downloading some necessary files, not the magisk version, just said some files, and I click yes, then it installed something and reboot, phone started fine, but when I wanted to start the process again I found out that I loose PC connectivity.
I have no connection at all, even if I manually boot in bootloader I can't connect to PC, so no adb commands,
Please can someone help

does someone has the patched boot image for new .119 firmaware, i updated and losee magisk

baster72 said:
Someone try this method to install xposed? I afraid to get bootloop.
Click to expand...
Click to collapse
Don't be afraid just flash stock boot if you get bootloop
joesa said:
does someone has the patched boot image for new .119 firmaware, i updated and losee magisk
Click to expand...
Click to collapse
I update my links you can get stock boot here Boot & RootedBoot ZenFone6

MystikMan97130 said:
Don't be afraid just flash stock boot if you get bootloop
I update my links you can get stock boot here Boot & RootedBoot ZenFone6
Click to expand...
Click to collapse
Thanks a lot !!! You really help a lot with this method

MystikMan97130 said:
Don't be afraid just flash stock boot if you get bootloop
I update my links you can get stock boot here Boot & RootedBoot ZenFone6
Click to expand...
Click to collapse
can you please check link, it is not working, i can see folder but can not download

Hello, direct link:
ZenFone6RootXposed

Nice, thanks a lot for this! Rooting on stock with unlocked bootloader worked for me perfectly (did not check xposed)!

est-ce que l'on perd ses données en faisant le root ?
merci!